Jump to content
XPEnology Community

4.3 issues


VeNoM
 Share

Recommended Posts

I tried the Chinese version DS3612xs_4.3-3776 in virtual Machine - VirtualBox, Mac OS X.

The problem is that Synology Assist is reporting a "strange" DHCP IP (not the range I use) - 169.254.110.172

 

bBtWBT0.jpg

 

Here are the files, on other server:

https://d.transfer.ro/DS3612xs_4.3-3776 ... 718502.zip

 

169.254.x.x is a APIPA address, most of the times you get this when the dhcp server is not reachable

Link to comment
Share on other sites

Try this guys...

 

http://pan.baidu.com/share/link?shareid ... =587667030

 

Courtesy of nas1.cn

 

If you don't know chinese,

 

i) Clink on Xpenology link

ii) Clink on 4.3 link

iii) point your mouse cursor slightly to the left of 107.8M. Click on arrow pointing downwards

iv) Pop up, click on the right button.

 

Its nice and mostly works, but NFS support appears to be broken again. During the startup it throws NFS modules loading errors and you can not connect to NFS share even all the configuration is correct.

Edited by Guest
Link to comment
Share on other sites

can you upload 3810 pat + boot img? THX :grin:

 

Thank you k3dt for the synobios, you are the man :smile:

Yes of course I will upload this, as soon as I fix remaining issues.

I have a strange issue on my P5KPL-AM mainboard, DSM doesn't detect any drive (never had this issue before with any build). With 3776 "chinese" build the drivers are properly detected... However everything work on my zotac AD01.

Maybe something in my kernel

EDIT : I'm just tired. Build ATA_PIIX (ICH5/6/7/8 Serial ATA ) as module instead of built-in. I will try to repack all of it tomorow :geek:

 

Is this working as an ESXi version with PVSCSI support out of the box or you need to modify it like the last 3211 beta? :ugeek:

For proper PVSCSI support we need a special build. Maybe when I release the 3810 build I will then post ESXi build

Link to comment
Share on other sites

Chinese version:

 

- installed on one SSD

- USB are working

- Even the system information functions is working (never before)

 

- upgraded to my 6 disk

- after reboot I did see only 5 disk, one e-sata

- did try to modify /etc.defaults/synoinfo.cfg > esataportconfig="0x00000" & internalportcfg="0xff"

- after reboot > Assistant show > Starting services

 

I have a backup, so no damage ....

 

Anyway, glad to see some new stuff about 4.3 in forum

Edited by Guest
Link to comment
Share on other sites

Forum of DS3612xs_4.3-3776_x64_General :

 

http://nas1.cn/thread-76319-1-1.html

 

On the download page there is a very useful utility "IMG MAC Editor 2"

It allows you to modify MAC and SN directly in the image, before its written to USB Flash disk.

 

With help of my Chinese friend here is the translation:

1.jpg.7828aa1bb53bbbbdbce795e1150d27f2.jpgscreen2.png[/attachment]

Write IMG successfully!

 

Simple and useful.

screen.png.301a0e1918a77533c7879e0b7b589f5a.png

screen1.png.5c76d55573c01c8211b97c07cb3e46fd.png

screen2.png.f9f7876ebafec9212092375487a33f9c.png

Edited by Guest
Link to comment
Share on other sites

I got a error 2 by installing the chinese version.

What does error 2 means??

 

 

I got no error. I changed the Nic number using the app(see page back) flashed the image using HHD Raw then used the pat file and so far so good.

But I will wait for Trantors version and then test that out for a few days.

Link to comment
Share on other sites

I got a error 2 by installing the chinese version.

What does error 2 means??

 

 

I got no error. I changed the Nic number using the app(see page back) flashed the image using HHD Raw then used the pat file and so far so good.

But I will wait for Trantors version and then test that out for a few days.

 

Did you see the package "Photo Station 6" in you package list? I can't see this !

Link to comment
Share on other sites

I got a error 2 by installing the chinese version.

What does error 2 means??

 

 

I got no error. I changed the Nic number using the app(see page back) flashed the image using HHD Raw then used the pat file and so far so good.

But I will wait for Trantors version and then test that out for a few days.

 

Did you see the package "Photo Station 6" in you package list? I can't see this !

 

 

Yep and it works. Looks like you had a bad flash or something like that.

 

@Trantor will you uploading your working version? I've got a spare HD to test it if you want.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...