interested Posted November 22, 2013 Share #301 Posted November 22, 2013 WOL solved ... New MB bios has under > Advanced > APM > Power On BY PCIE/PCI = DISABLED I set it to ENABLED & now it works .... Quote Link to comment Share on other sites More sharing options...
stelle007 Posted November 27, 2013 Share #302 Posted November 27, 2013 I can't get ISCSI to work. When ever I create a File og Block level LUN, and assigns it to a target, the whole process hangs, and I can't connect to it from an initiator. This worked fine for me on 4.2. I have tried this on two different hardware setups, with the same result. Can some one please confirm or deny if ISCSI works please. And thank you so much Trantor for the great work. Quote Link to comment Share on other sites More sharing options...
guldhammer Posted November 27, 2013 Share #303 Posted November 27, 2013 I can't make that IMG MAC Editor 2 Works, it makes a fault everytime i run it. Is it possible that someone can make 2 copies of Ver 4.3 with different mac adress and serial numbers?? I can't Work with Linux and i dont have a machine with Linux on. If someone will help me, here is the info: Machine 1: Mac: 00:15:17:31:A3:F3 Serial: B7J4N008930 Machine 2: Mac: 00:15:17:31:A3:F2 Serial: B7J4N008931 Regards Guldhammer Quote Link to comment Share on other sites More sharing options...
fonix232 Posted November 27, 2013 Share #304 Posted November 27, 2013 I can't make that IMG MAC Editor 2 Works, it makes a fault everytime i run it. Is it possible that someone can make 2 copies of Ver 4.3 with different mac adress and serial numbers?? I can't Work with Linux and i dont have a machine with Linux on. If someone will help me, here is the info: Machine 1: Mac: 00:15:17:31:A3:F3 Serial: B7J4N008930 Machine 2: Mac: 00:15:17:31:A3:F2 Serial: B7J4N008931 Regards Guldhammer Two solutions: 1. Install Linux in VM 2. Install XPE on one of the devices, then edit the boot USB on it. Quote Link to comment Share on other sites More sharing options...
guldhammer Posted November 28, 2013 Share #305 Posted November 28, 2013 I can't make that IMG MAC Editor 2 Works, it makes a fault everytime i run it. Is it possible that someone can make 2 copies of Ver 4.3 with different mac adress and serial numbers?? I can't Work with Linux and i dont have a machine with Linux on. If someone will help me, here is the info: Machine 1: Mac: 00:15:17:31:A3:F3 Serial: B7J4N008930 Machine 2: Mac: 00:15:17:31:A3:F2 Serial: B7J4N008931 Regards Guldhammer Two solutions: 1. Install Linux in VM 2. Install XPE on one of the devices, then edit the boot USB on it. Dont use VM. Quote Link to comment Share on other sites More sharing options...
Mentat Posted November 28, 2013 Share #306 Posted November 28, 2013 After installing Debian Chroot I've tried to make it run on boot. The result? My HDDs and volume disappeared. Please help... Aug 24 03:02:08 Synology2 spacetool.shared: space_disk_block_get.c:63 Failed to open path: /dev/sda, errno=No such file or directory Aug 24 03:02:08 Synology2 spacetool.shared: space_disk_block_get.c:63 Failed to open path: /dev/sdb, errno=No such file or directory ; ; ;etc ; ; ; Aug 24 03:02:20 Synology2 synoreport: src/lib/util.c:553 (No such file or directory)(src/lib/util.c:553)(No such file or directory)cannot get share path, share=video Aug 24 03:02:20 Synology2 synoreport: src/synoreport.c:476 (No such file or directory)init location failed Aug 24 03:02:20 Synology2 synoreport: src/lib/util.c:553 (No such file or directory)(src/lib/util.c:553)(No such file or directory)cannot get share path, share=video Aug 24 03:02:20 Synology2 synoreport: src/synoreport.c:476 (No such file or directory)init location failed Aug 24 03:02:21 Synology2 avahi-daemon[8532]: Failed to add service 'Synology2' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record Aug 24 03:02:21 Synology2 synoreport: src/lib/util.c:553 (No such file or directory)(src/lib/util.c:553)(No such file or directory)cannot get share path, share=video Aug 24 03:02:21 Synology2 synoreport: src/lib/util.c:604 (No such file or directory)(src/lib/util.c:604)(No such file or directory)get report location failed Aug 24 03:02:21 Synology2 synoreport: src/synoreport.c:317 (No such file or directory)(src/synoreport.c:317)(No such file or directory)init path failed, section=global Aug 24 03:02:21 Synology2 synoreport: src/synoreport.c:424 (No such file or directory)(src/synoreport.c:424)(No such file or directory)init profile failed, profile=global Aug 24 03:02:21 Synology2 synoreport: src/lib/util.c:553 (No such file or directory)(src/lib/util.c:553)(No such file or directory)cannot get share path, share=video Aug 24 03:02:21 Synology2 synoreport: src/synoreport.c:476 (No such file or directory)init location failed Aug 24 03:02:22 Synology2 synocheckhotspare: synocheckhotspare.c:135 [iNFO] No hotspare config, skip hotspare config check. [0x0000 (null):0] Aug 24 03:02:22 Synology2 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab Aug 24 03:02:22 Synology2 synopkg: pkgstartstop.cpp:89 Package target path broken, Perl Aug 24 03:02:22 Synology2 synopkg: pkgstartstop.cpp:89 Package target path broken, py3k Quote Link to comment Share on other sites More sharing options...
stelle007 Posted November 28, 2013 Share #307 Posted November 28, 2013 Can anyone tell me if ISCSI works or not for you in 4.3? I can't get it to work, It worked great in 4.2 Quote Link to comment Share on other sites More sharing options...
ckmarkhsu Posted November 28, 2013 Share #308 Posted November 28, 2013 Can anyone tell me if ISCSI works or not for you in 4.3?I can't get it to work, It worked great in 4.2 iSCSI works well on my XPEnology 4.3 Quote Link to comment Share on other sites More sharing options...
neonflx Posted November 29, 2013 Share #309 Posted November 29, 2013 trying to install 4.3 on barebones using a M1015 flashed to IT mode, this card uses the mpt2sas drivers which worked great under 4.2, the issue I'm having is that the HD attached to the M1015 controller are not recognized, I found kind of a solution on this thread viewtopic.php?f=2&t=1361&start=80 however, when I use that zimage on the usb it does recognized the drivers but the i210 nic's are not and neither is the onboard SATA controller, any suggestions will be greatly appreciated the board is a ASRCOK E3C224 4l with a E1330 cpu, again the controller is a ServeRaid M1015 flashed to IT mode, the HD are WD Red 3tb Quote Link to comment Share on other sites More sharing options...
stelle007 Posted November 29, 2013 Share #310 Posted November 29, 2013 trying to install 4.3 on barebones using a M1015 flashed to IT mode, this card uses the mpt2sas drivers which worked great under 4.2, the issue I'm having is that the HD attached to the M1015 controller are not recognized, I found kind of a solution on this thread viewtopic.php?f=2&t=1361&start=80 however, when I use that zimage on the usb it does recognized the drivers but the i210 nic's are not and neither is the onboard SATA controller, any suggestions will be greatly appreciated the board is a ASRCOK E3C224 4l with a E1330 cpu, again the controller is a ServeRaid M1015 flashed to IT mode, the HD are WD Red 3tb Trantor is fixing it in the next release, check this out: viewtopic.php?f=2&t=1361&start=110 Quote Link to comment Share on other sites More sharing options...
neonflx Posted November 29, 2013 Share #311 Posted November 29, 2013 thanks Quote Link to comment Share on other sites More sharing options...
e-vred Posted November 30, 2013 Share #312 Posted November 30, 2013 https://www.dropbox.com/s/nepkmcj5csg93 ... 8%2058.jpg further loading is not. the same situation with all builds + + (4.1, 4.2). Mb BioStar A770E (RTL) SocketAM2+ < AMD 770> PCI-E+GbLAN SATA RAID ATX 4DDR-II Cpu Athlon 620 x4 Ddr2 5 gb Hdd 160gb for test Gigabit Ethernet ACORP L-1000S PCI screenshot made after detaching and attaching the boot flash Quote Link to comment Share on other sites More sharing options...
guldhammer Posted November 30, 2013 Share #313 Posted November 30, 2013 Works like a charm on my 2 Fujitsu Scaleo Home Servers Quote Link to comment Share on other sites More sharing options...
ckmarkhsu Posted November 30, 2013 Share #314 Posted November 30, 2013 Can anyone tell me if ISCSI works or not for you in 4.3?I can't get it to work, It worked great in 4.2 Sorry, when I mount iSCSI to VMware ESXi, it crashed. so I downgrade to 4.2 too Quote Link to comment Share on other sites More sharing options...
Montago Posted November 30, 2013 Share #315 Posted November 30, 2013 (edited) DSM 4.3 in VMWare ruins my Battlefield 3 gameplay... my game is lagging insanely !! you can see the massive lag going on in this video (starts at 1:40) I've installed the following Packages: - Audio station - Cloud station - Download station - GIT Server - High Availabillity - iTunes Server - Java Manager - Media Server - Perl - Photo Station - phpMyAdmin - Plex Media server - Python - Python 3 - SVN - Video Station - VPN Server The VMWare client, runs on a different server on the LAN (not on my gaming computer).. so it's pretty severe that it can ruin the whole network !! edit: NONE of the above apps are configured, and only 2 GB images is served in PhotoStation. I haven't tried shutting down apps one by one (yet) so i dont know if its a single app that is evil Edited December 2, 2013 by Guest Quote Link to comment Share on other sites More sharing options...
Aigor Posted December 2, 2013 Share #316 Posted December 2, 2013 I think you have to have some network problem, if you use gigabit link it's' weird you can saturate whole link, are you shure of your network infrastructure? Quote Link to comment Share on other sites More sharing options...
Montago Posted December 2, 2013 Share #317 Posted December 2, 2013 I think you have to have some network problem, if you use gigabit link it's' weird you can saturate whole link, are you shure of your network infrastructure? I have 1 Gbit ethernet in the whole house. My internet is a cablemodem 50/20 Mbit... Quote Link to comment Share on other sites More sharing options...
DerWuff Posted December 2, 2013 Share #318 Posted December 2, 2013 @Montago: You should probably have an own thread for your issues. Also you should describe the complete setup you are running. To me it looks as if you are running a local VMWare Workstation with XPenology and now you are complaining that this takes CPU-Time which leads to lags in Battlefield. Also if you run your copies from the local PC to the VM, you should consider the virtualization layer and some disk i/o blockages which will probably cause your pc to be slower than expected. Quote Link to comment Share on other sites More sharing options...
Montago Posted December 3, 2013 Share #319 Posted December 3, 2013 @Montago: You should probably have an own thread for your issues. Also you should describe the complete setup you are running. To me it looks as if you are running a local VMWare Workstation with XPenology and now you are complaining that this takes CPU-Time which leads to lags in Battlefield. Also if you run your copies from the local PC to the VM, you should consider the virtualization layer and some disk i/o blockages which will probably cause your pc to be slower than expected. You didn't read what i wrote: The VMWare client, runs on a different server on the LAN (not on my gaming computer).. my Lan setup: - One server running VMWare with 3 virtual servers: DomainController, WebServer+VPN and XPenology DSM4.3 - Two Gaming computers - One Laptop - One Synology DS409Slim Between all nodes there are 1 Gbit Wired Ethernet It is uncertain if the problem stems from LAN interference (DSM talking too much on lan) or Internet interference (DSM doing QoS heavy tasks on internet) Like i said, the XPenology is almost unconfigured ... i set it up in VMWare and have installed 15 apps, but didn't configure any of the apps. Quote Link to comment Share on other sites More sharing options...
totalnas Posted December 3, 2013 Share #320 Posted December 3, 2013 Hi Trantor, Please, can you add the driver for AX88179 Gigabit Ethernet USB 3.0 in your 4.3 release? Thank you! Quote Link to comment Share on other sites More sharing options...
benuk Posted December 3, 2013 Share #321 Posted December 3, 2013 Please post your request here: viewtopic.php?f=2&t=1361 Thank You! benuk Quote Link to comment Share on other sites More sharing options...
fonix232 Posted December 5, 2013 Share #322 Posted December 5, 2013 https://www.dropbox.com/s/nepkmcj5csg93id/%D0%A4%D0%BE%D1%82%D0%BE%2024.11.13%2C%2012%2028%2058.jpgfurther loading is not. the same situation with all builds + + (4.1, 4.2). Mb BioStar A770E (RTL) SocketAM2+ < AMD 770> PCI-E+GbLAN SATA RAID ATX 4DDR-II Cpu Athlon 620 x4 Ddr2 5 gb Hdd 160gb for test Gigabit Ethernet ACORP L-1000S PCI screenshot made after detaching and attaching the boot flash It does not have to load further. Here is the point where you use your web browser to access the server and install the whole system. Except of course if your NIC is not supported in the release, in which case you cannot make any network connection. Quote Link to comment Share on other sites More sharing options...
VeNoM Posted December 5, 2013 Author Share #323 Posted December 5, 2013 DSM 4.3-3810 Update 2 available. I just updated and with my mod it seems ok. Quote Link to comment Share on other sites More sharing options...
MarsManden Posted December 5, 2013 Share #324 Posted December 5, 2013 DSM 4.3-3810 Update 2 available. I just updated and with my mod it seems ok. Does this mean, that you have updated directly from Synology? I'm running 4.3 on a N54L and was wondering if this was possible, as it is not a complete system upgrade. Quote Link to comment Share on other sites More sharing options...
neonflx Posted December 6, 2013 Share #325 Posted December 6, 2013 @venom i'm tryin to update but it fails, i was able to do update one without issues, then i have to reload the entire system and since i have tried to update straight to update 2 without any luck , any suggestions? thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.