repulse Posted March 25, 2016 #1 Posted March 25, 2016 Hi guys ! I've just installed Xpenology DSM 5.2-5644 on ESXI 5.5, from this link http://xpenology.com/forum/viewtopic.php?f=2&t=3132 and adapted it to XpenoBoot, then i'm facing troubles. When at volume creation, got this : and Why does this disk is in third position ? What i've done wrong ? Was OK with NanoBoot, but with XpenoBoot fresh install or upgrade from NanoBoot, same thing. Thanks !
repulse Posted March 25, 2016 Author #3 Posted March 25, 2016 You connected your second HDD to 3rd SATA port. Nope. Actually, it's a virtualized esxi, for my lab. Here is my VM disk conf:
billat29 Posted March 25, 2016 #4 Posted March 25, 2016 You have disk 1 on IDE(0:0) and disk 2 on SCSI(0:0). Not sure why you have done this. I guess the disk in between is IDE(0:1). I suggest that you reallocate them on the same SCSI channel as (0:0) and (0:1)
repulse Posted March 25, 2016 Author #5 Posted March 25, 2016 I've done this as suggested in thread linked in first post.
billat29 Posted March 26, 2016 #6 Posted March 26, 2016 Ah! I'm with you. The first drive is your boot drive not a DSM volume.My mistake. You want to stop DSM seeing your IDE drives. You have to modify the boot image to do this. Have a look at this thread, it shows you which parameter to add and points you to a video which show explain how to do that. viewtopic.php?f=2&t=10774&p=52030&hilit=remove+ide#p52030
repulse Posted March 26, 2016 Author #7 Posted March 26, 2016 Ah! I'm with you. The first drive is your boot drive not a DSM volume.My mistake.You want to stop DSM seeing your IDE drives. You have to modify the boot image to do this. Have a look at this thread, it shows you which parameter to add and points you to a video which show explain how to do that. viewtopic.php?f=2&t=10774&p=52030&hilit=remove+ide#p52030 Ah, thanks dude, seems to be exactly what i need. Will try it ASAP, and report
Recommended Posts