Jump to content
XPEnology Community

TinyCore RedPill Loader (TCRP)

pocopico

By pocopico
in Loaders

 Share

Recommended Posts

blindspot Junior Member

blindspot

Posted
Posted
Just now, Peter Suh said:

 

Since it's a laptop, I think there's a high possibility that there's no
It would be impossible to turn on the hot plug of Sata Port, right?

Also, are you trying with DSM 7.0.1 TinyCore?

Dont have hotplug in bios settings. satamap now finds SataPortMap=5 and DiskIdsMap=00  but message says errors on hdd 1,2,4

00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])

Kernel driver in use: ahci

Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted
1 hour ago, Peter Suh said:

@pocopico

 

In the first 7.0.1 build of the TSU, that command does not seem to be executed well and is random.

Can't we get a guaranteed execution?

 

sudo ln -s $local_cache /home/tc/custom-module


It seems that the custom-module -> /mnt/sdb3/auxfiles link is often not created.

 

 

 

I just encountered the error message below while building 7.0.1 of DVA3221.

 

Also, the custom-module ->/mnt/sdb3/auxfiles link was not generated.

 

 

-------------------------------

Caching files for future use
./rploader.sh: line 1648: [: 7.1: integer expression expected
Found /home/tc/redpill-load/cache/dva3221_42218.pat, copying to cache directory : /mnt/sdb3/auxfiles 
cp: preserving permissions for '/mnt/sdb3/auxfiles/dva3221_42218.pat': Operation not permitted

Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted
2 minutes ago, blindspot said:

Dont have hotplug in bios settings. satamap now finds SataPortMap=5 and DiskIdsMap=00  but message says errors on hdd 1,2,4

00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])

Kernel driver in use: ahci

 

Can't I physically point to SataportMap = 1 leaving only one SSD or HDD? Do you happen to have a Sata CD-ROM drive?

Link to comment
Share on other sites
blindspot Junior Member

blindspot

Posted
Posted
Just now, Peter Suh said:

 

Can't I physically point to SataportMap = 1 leaving only one SSD or HDD? Do you happen to have a Sata CD-ROM drive?

on these settings, no hdd found. there is a sata odd connected. 

i've tried 

SataPortMap=1 and DiskIdsMap=00

SataPortMap=1 and DiskIdsMap=01

SataPortMap=1 and DiskIdsMap=02

SataPortMap=4 and DiskIdsMap=00

SataPortMap=3 and DiskIdsMap=00

SataPortMap=2 and DiskIdsMap=04

SataPortMap=3 and DiskIdsMap=00

no hdd found

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
2 minutes ago, blindspot said:

on these settings, no hdd found. there is a sata odd connected. 

i've tried 

SataPortMap=1 and DiskIdsMap=00

SataPortMap=1 and DiskIdsMap=01

SataPortMap=1 and DiskIdsMap=02

SataPortMap=4 and DiskIdsMap=00

SataPortMap=3 and DiskIdsMap=00

SataPortMap=2 and DiskIdsMap=04

SataPortMap=3 and DiskIdsMap=00

no hdd found

 

Can you please remove the SataPortMap from the linux line ? 

  • Thanks 1
Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
10 hours ago, sam juan said:

@totikk @Dreadnought

 

were you able to fix the issue where it says "Sorry, the page you are looking for is not found." issue and then turns off?
i have 3 qnap boxes and the other 2 works fine for TSU 7.1, fresh install;

atom 525 does not work, i3-2120 works fine. not sure if related to AES but as per intel site: Intel® AES New Instructions = NO for both proc.
atom 525 works with 7.0.1; i will try to do upgrade from 7.0.1 to 7.1 some time.


cc @pocopico for some ideas. :)

 

9 hours ago, petr_z said:

on vmware platform with dva3221 also does not fix.

 

Can you both try recreating the loader ?

 

./rploader.sh ext platform-XXXXXXXXX add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json

 

I've modified the script on redpill-misc extension for identifying missing HW to match the modules-load.d files. it should work for both. Tries to find CPU capabilities and NVIDIA GPU existence to disable the following: 

 

   acpi-cpufreq on -> /lib/modules-load.d/70-cpufreq-kernel.conf
   crc32c-intel on -> /lib/modules-load.d/70-crypto-kernel.conf
   nvidia       on -> /lib/modules-load.d/70-syno-nvidia-gpu.conf
   nvidia-uvm   on -> /lib/modules-load.d/70-syno-nvidia-gpu.conf
 

 

  • Like 2
  • Thanks 2
Link to comment
Share on other sites
blindspot Junior Member

blindspot

Posted
Posted
1 minute ago, pocopico said:

 

Can you provide the output of lsscsi -Hv and lspci -nnq from TC ?

lsscsi -Hv

[0]    ahci          
  dir: /sys/class/scsi_host//host0
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0
[1]    ahci          
  dir: /sys/class/scsi_host//host1
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1
[2]    ahci          
  dir: /sys/class/scsi_host//host2
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2
[3]    ahci          
  dir: /sys/class/scsi_host//host3
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3
[4]    ahci          
  dir: /sys/class/scsi_host//host4
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4
[5]    usb-storage   
  dir: /sys/class/scsi_host//host5
  device dir: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/host5

 

lspci -nnq
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5)
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5)
00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller [8086:8c49] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 950M] [10de:139a] (rev a2)
03:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader [10ec:5287] (rev 01)
04:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted (edited)
10 minutes ago, blindspot said:

lsscsi -Hv

[0]    ahci          
  dir: /sys/class/scsi_host//host0
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0
[1]    ahci          
  dir: /sys/class/scsi_host//host1
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1
[2]    ahci          
  dir: /sys/class/scsi_host//host2
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2
[3]    ahci          
  dir: /sys/class/scsi_host//host3
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3
[4]    ahci          
  dir: /sys/class/scsi_host//host4
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4
[5]    usb-storage   
  dir: /sys/class/scsi_host//host5
  device dir: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/host5

 

lspci -nnq
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5)
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5)
00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller [8086:8c49] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 950M] [10de:139a] (rev a2)
03:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader [10ec:5287] (rev 01)
04:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)

 

And when you telnet to DSM the fdisk -l what does it show ?

 

also i forgot to ask for an lsscsi from TC

Edited by pocopico
  • Thanks 1
Link to comment
Share on other sites
blindspot Junior Member

blindspot

Posted
Posted
13 minutes ago, pocopico said:

 

And when you telnet to DSM the fdisk -l what does it show ?

 

also i forgot to ask for an lsscsi from TC

lsscsi

[2:0:0:0]    cd/dvd  Slimtype DVD A  DA8A6SH   GAA2  /dev/sr0 
[4:0:0:0]    disk    ATA      HGST HTS721010A9 A3J0  /dev/sda 
[5:0:0:0]    disk             USB DISK 2.0     PMAP  /dev/sdb 

 

please remind me how to connect to dsm with telnet.

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
3 minutes ago, blindspot said:

lsscsi

[2:0:0:0]    cd/dvd  Slimtype DVD A  DA8A6SH   GAA2  /dev/sr0 
[4:0:0:0]    disk    ATA      HGST HTS721010A9 A3J0  /dev/sda 
[5:0:0:0]    disk             USB DISK 2.0     PMAP  /dev/sdb 

 

please remind me how to connect to dsm with telnet.

 

So here is your answer about low numbers. DVD is the third device (2) and DISK is the fifth (4)  

 

[0]    ahci          
  dir: /sys/class/scsi_host//host0
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0
[1]    ahci          
  dir: /sys/class/scsi_host//host1
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1
[2]    ahci           cd/dvd  Slimtype DVD A  DA8A6SH   GAA2  /dev/sr0 
  dir: /sys/class/scsi_host//host2
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2
[3]    ahci          
  dir: /sys/class/scsi_host//host3
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3
[4]    ahci            disk    ATA      HGST HTS721010A9 A3J0  /dev/sda 
  dir: /sys/class/scsi_host//host4
  device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4
[5]    usb-storage    disk             USB DISK 2.0     PMAP  /dev/sdb 
  dir: /sys/class/scsi_host//host5
  device dir: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/host5

 

 

If you limit to 1/2/3/4 you leave the fifth device out. Can you try SataPortMap=15 ?

 

search telnet on this topic, you will find numerous posts.

  • Thanks 1
Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
2 minutes ago, blindspot said:

http://DS_IP:5000/webman/start_telnet.cgi

Hmmm… can't reach this page

DS_IP took too long to respond

Could not open connection to the host, on port 23: Connect failed

 

if you''ve added redpill-misc open your browser and http://<yourip>:7681

  • Thanks 1
Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted

Build / DSM installation / DSM boot successful.

HDD SHR status on HBA normal

 

No NVIDIA GPU specification or patch separately.

 

[DVA3221]

 

./rploader.sh update now

./rploader.sh fullupgrade now

 

./rploader.sh serialgen DVA3221

./rploader.sh identifyusb now

./rploader.sh satamap now

 

./rploader.sh build denverton-7.0.1-42218

 

(run if custom-module -> /mnt/sdb3/auxfiles is missing)

ll /mnt. (Check the 3rd partition in usb)

sudo ln -s /mnt/sdb3/auxfiles /home/tc/custom-module

 

./rploader.sh clean now

./rploader.sh build denverton-7.1.0-42661

 

./rploader.sh clean now;  rm -rf /mnt/sdb3/auxfiles;  rm -rf /home/tc/custom-module;  ./rploader.sh backup now;

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
blindspot Junior Member

blindspot

Posted
Posted
8 minutes ago, pocopico said:

Can you try SataPortMap=15 ?

SataPortMap=15 and DiskIdsMap=00

DiskStation> fdisk -l
 

Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/synoboot1 *  0,32,33     6,62,56           2048     100351      98304 48.0M 83 Linux
/dev/synoboot2    6,62,57     15,205,62       100352     253951     153600 75.0M 83 Linux
/dev/synoboot3    15,205,63   130,138,8       253952    2097151    1843200  900M 83 Linux
DiskStation> 

It doesn't find any disk

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
3 minutes ago, blindspot said:

SataPortMap=15 and DiskIdsMap=00

DiskStation> fdisk -l
 

Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/synoboot1 *  0,32,33     6,62,56           2048     100351      98304 48.0M 83 Linux
/dev/synoboot2    6,62,57     15,205,62       100352     253951     153600 75.0M 83 Linux
/dev/synoboot3    15,205,63   130,138,8       253952    2097151    1843200  900M 83 Linux
DiskStation> 

It doesn't find any disk

 

Ok with no SataPortMap ?

  • Like 1
Link to comment
Share on other sites
blindspot Junior Member

blindspot

Posted
Posted
1 minute ago, pocopico said:

 

Ok with no SataPortMap ?

We have detected errors on the hard 1,2,4 drives and the SATA ports have also been disabled.

Please shut down your DS3617xs to replace or remove the hard drives and try again.

 

DiskStation> fdisk -l
Disk /dev/sde: 932 GB, 1000204886016 bytes, 1953525168 sectors
Device  Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/sde1    0,0,2       1023,255,63          1 4294967295 4294967295 2047G ee EFI GPT

 

Disk /dev/synoboot: 3700 MB, 3879731200 bytes, 7577600 sectors
Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/synoboot1 *  0,32,33     6,62,56           2048     100351      98304 48.0M 83 Linux

/dev/synoboot2    6,62,57     15,205,62       100352     253951     153600 75.0M 83 Linux

/dev/synoboot3    15,205,63   130,138,8       253952    2097151    1843200  900M 83 Linux

 

same as SataPortMap=5 and DiskIdsMap=00

 

 

Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted (edited)
7 minutes ago, blindspot said:

We have detected errors on the hard 1,2,4 drives and the SATA ports have also been disabled.

Please shut down your DS3617xs to replace or remove the hard drives and try again.

 

DiskStation> fdisk -l
Disk /dev/sde: 932 GB, 1000204886016 bytes, 1953525168 sectors
Device  Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/sde1    0,0,2       1023,255,63          1 4294967295 4294967295 2047G ee EFI GPT

 

Disk /dev/synoboot: 3700 MB, 3879731200 bytes, 7577600 sectors
Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/synoboot1 *  0,32,33     6,62,56           2048     100351      98304 48.0M 83 Linux

/dev/synoboot2    6,62,57     15,205,62       100352     253951     153600 75.0M 83 Linux

/dev/synoboot3    15,205,63   130,138,8       253952    2097151    1843200  900M 83 Linux

 

same as SataPortMap=5 and DiskIdsMap=00

 

 

 

 

@pocopico , @blindspot

 

Hey Guys, do you remember me reporting on ds3617xs above and asking if it is dsm 7.1 or dsm 7.0.1?

Perhaps there is something wrong with sataportmap working on dsm 7.1 ds3617xs.

When I went to install dsm 7.1 on ds3617xs,
I was looking forward to the migration, but I saw that there was no installation
The dsm does not seem to recognize the disk already installed.

Shouldn't we check this part first?

 

If dsm 7.0.1 is attempted, I can go back to dsm 7.0.1 and proceed with the same test.

 

Edited by Peter Suh
Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
9 minutes ago, blindspot said:

We have detected errors on the hard 1,2,4 drives and the SATA ports have also been disabled.

Please shut down your DS3617xs to replace or remove the hard drives and try again.

 

DiskStation> fdisk -l
Disk /dev/sde: 932 GB, 1000204886016 bytes, 1953525168 sectors
Device  Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/sde1    0,0,2       1023,255,63          1 4294967295 4294967295 2047G ee EFI GPT

 

Disk /dev/synoboot: 3700 MB, 3879731200 bytes, 7577600 sectors
Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/synoboot1 *  0,32,33     6,62,56           2048     100351      98304 48.0M 83 Linux

/dev/synoboot2    6,62,57     15,205,62       100352     253951     153600 75.0M 83 Linux

/dev/synoboot3    15,205,63   130,138,8       253952    2097151    1843200  900M 83 Linux

 

same as SataPortMap=5 and DiskIdsMap=00

 

 

 

 

OK, can you please change to SataPortMap=5 and add sata_remap="5>0" and send me the output of fdisk again ? 

  • Like 1
Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted
6 minutes ago, Peter Suh said:

 

 

@pocopico , @blindspot

 

Hey Guys, do you remember me reporting on ds3617xs above and asking if it is dsm 7.1 or dsm 7.0.1?

Perhaps there is something wrong with sataportmap working on dsm 7.1 ds3617xs.

When I went to install dsm 7.1 on ds3617xs,
I was looking forward to the migration, but I saw that there was no installation
The dsm does not seem to recognize the disk already installed.

Shouldn't we check this part first?

 

If dsm 7.0.1 is attempted, I can go back to dsm 7.0.1 and proceed with the same test.

 

 

@pocopico

Please don't ignore my message and read it once.

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
Just now, mitch55 said:

@pocopico (or other)

 

And mine? 😆

 

Have to put my RDM Sata on sata 1? with the loader?

 

you need to create pointers and add these pointer files as hard drives.

 

to create pointers - > https://gist.github.com/Hengjie/1520114890bebe8f805d337af4b3a064

 

Put your pointers to the local datastore 

 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...