Jump to content
XPEnology Community

RedPill Tinycore loader


pocopico

Recommended Posts

2 hours ago, Bobbenoster said:

relays were mentioned in the original post so I believe the idea is a physical trigger of the power button at a scheduled time (presumably only if the machine is not already on) with some kind of communication (I'd venture serial comms) to the esp chip to set the automatic startup time... 

Ah I've got you, definitely possible, can power it off an internal USB header.  Shall start putting something together.  I've some designs that could be made to work but then a custom one might be a good idea.

Link to comment
Share on other sites

Hi pocopico,

 

I am trying to use the loader on HP T610 (and T610P which is the same hardware)

and it takes a long time to search in "Synology Assistant" (it can identify and add tg3 extension during build)

When I try to install the PAT file, it say that the hard drive (2) is having error.

 

It identified SATAPortMap = "3" and DiskIdxMap = "00"

 

Currently it is running 6.1.7 with 1.02b DS3615xs.

 

Can you give me some advise?

 

tc@box:~$ lspci -nnq
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320] [1002:9806]
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314]
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40)
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0]
00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2) [1002:43a2]
00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3) [1002:43a3]
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719]
03:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM57781 Gigabit Ethernet PCIe [14e4:16b1] (rev 10)
04:00.0 USB controller [0c03]: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller [104c:8241] (rev 02)

 

and when I try to build bromolow-7.0.1-42218, it seems it cannot find the controller extension.

and I cannot find an appropriate extension for [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]

in https://github.com/pocopico/rp-ext

tc@box:~$ ./rploader.sh build bromolow-7.0.1-42218
Rploader Version : 0.7.0.6
Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download
TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download
SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : bromolow
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 3
MODULE_ALIAS_FILE :  modules.alias.3.json
SYNOMODEL : ds3615xs_42218
MODEL : DS3615xs
Local Cache Folder : /mnt/sdb3/auxfiles
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> Version is current
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
No extra build option specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds3615xs_42218
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-3.10.108.tgz
Extracting module
Got redpill-linux-v3.10.108.ko
Testing modules.alias.3.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found VGA Controller : pciid 1002d00009806  Required Extension :
No matching extension
Found SATA Controller : pciid 1002d00004391  Required Extension :
No matching extension

 

Thanks and regards,

Edited by volospin
Additional information
Link to comment
Share on other sites

2 hours ago, AlexSoft_58 said:

 

It's like a failure in the current Sinology Download Center.
In addition to the existing 42661 revision, 42661 U1 revision cannot be downloaded.
When attempting to download to 42661, the link is interrupted due to a missing issue.

 

Pat URL : https://global.download.synology.com/download/DSM/release/7.1/42661/DSM_DS3622xs%2B_42661.pat
Downloading pat file from URL : https://global.download.synology.com/download/DSM/release/7.1/42661/DSM_DS3622xs%2B_42661.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  3322  100  3322    0     0   8024      0 --:--:-- --:--:-- --:--:--  8024
Could not determine if file //mnt/sda3/auxfiles/ds3622xsp_42661.pat is encrypted or not, maybe corrupted
-rwxrwxrwx 1 root root 3322 Apr 27 13:52 //mnt/sda3/auxfiles/ds3622xsp_42661.pat
041

Link to comment
Share on other sites

23 minutes ago, Peter Suh said:

 

It's like a failure in the current Sinology Download Center.

 

No its not. Read the changelog. They replaced the 42661 completely with 42661-1. The old complete Images for 42661 dont exist anymore.

The TC must be updated to the new 42661-1 Images.

Update to 42661-1 with the ~5MB File works on running Machine.

Link to comment
Share on other sites

1 hour ago, Peter Suh said:

 

It's like a failure in the current Sinology Download Center.
In addition to the existing 42661 revision, 42661 U1 revision cannot be downloaded.
When attempting to download to 42661, the link is interrupted due to a missing issue.

 

Pat URL : https://global.download.synology.com/download/DSM/release/7.1/42661/DSM_DS3622xs%2B_42661.pat
Downloading pat file from URL : https://global.download.synology.com/download/DSM/release/7.1/42661/DSM_DS3622xs%2B_42661.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  3322  100  3322    0     0   8024      0 --:--:-- --:--:-- --:--:--  8024
Could not determine if file //mnt/sda3/auxfiles/ds3622xsp_42661.pat is encrypted or not, maybe corrupted
-rwxrwxrwx 1 root root 3322 Apr 27 13:52 //mnt/sda3/auxfiles/ds3622xsp_42661.pat
041

 

Temporarily share the pat files until the Synology Download Center is restored.
Copy it under /mnt/sd#3/auxfiles/ for permanent use.
Instead, you can store only about two due to the capacity limit.

 

https://drive.google.com/drive/folders/1fIvbwHLqe4GIIi5RcNayJKykqcaCbva1

  • Thanks 1
Link to comment
Share on other sites

47 minutes ago, loomes said:

 

No its not. Read the changelog. They replaced the 42661 completely with 42661-1. The old complete Images for 42661 dont exist anymore.

The TC must be updated to the new 42661-1 Images.

Update to 42661-1 with the ~5MB File works on running Machine.

 

TC's bootloader cannot be built only with that 5M capacity update file.
The original revision 7.1.0-42661 file must be present.

Link to comment
Share on other sites

54 minutes ago, Peter Suh said:

 

TC's bootloader cannot be built only with that 5M capacity update file.
The original revision 7.1.0-42661 file must be present.

 

LOL of course not 😆

You dont understand me. The "old" 42661 complete Images are gone. They are replaced with the Update1 Images.

Have a look here: https://archive.synology.com/download/Os/DSM

The "7.1-42661-1" directory has the Update Files for running installations with the "old" 42661 Machines.

The "7.1-42661-1-NanoPacked" dir holds the new complete Images (dont know what NanoPacked means?!)

 

So the TC must Updated for the new complete Images.

Link to comment
Share on other sites

7 минут назад, sam juan сказал:

какие будут шаги по обновлению 7.1-42661-u1 с 42661?
просто загрузите файл pat из synology и обновите его?
Благодарю. 

Yes

  • Like 1
Link to comment
Share on other sites

I'm having an issue with

 

05:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
        Subsystem: Super Micro Computer Inc Device 1533
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at f7300000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at c000 [size=32]
        Memory at f7380000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: igb

 

When I boot tinycore-redpill.v0.4.6

 

Here is the deal it loads fine but when I run

 

ifconfig -a

 

It finds it but does not get an ip address until I unplug the nic and then plug it back in then it looks like this

 

 

 Link encap:Ethernet  HWaddr 00:25:90:F3:46:D7
          inet addr:192.168.1.23  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:835 errors:0 dropped:0 overruns:0 frame:0
          TX packets:210 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000

 

./rploader.sh build broadwellnk-7.1.0-42661

 

Then I reboot and get another ip like 192.168.1.24 for example

 

So the install runs fine until the 10 minute timer.  The pc reboots and no ip for maybe 3 minutes but then it finds an ip like 192.168.1.25 when the clock counts to 0 it says "something has gone wrong"

 

any ideas about this would be helpful....

 

 

 

 


         
         

 

 

 

 

 

 

Edited by RacerX
Link to comment
Share on other sites

В 25.04.2022 в 14:29, pocopico сказал:

 

Interesting setup, you could try to set the internal_slot@1 to the pci values of your m2 data drives.

 

For instance

 

tc@box:~$ udevadm info --query path --name nvme0n1

 

/devices/pci0000:00/0000:00:16.0/0000:0b:00.0/nvme/nvme0/nvme0n1
 

tc@box:~$ udevadm info --query path --name nvme0n1 | awk -F "\/" '{print $4 ":" $5 }' | awk -F ":" '{print $2 ":" $3 "," $6}' | sed 's/,*$//'
 

00:16.0,00.0
 

        internal_slot@1 {
                protocol_type = "sata";
                power_pin_gpio = <0x14 0x0>;
                detect_pin_gpio = <0x23 0x1>;
                led_type = "lp3943";

                ahci {
pcie_root = "00:16.0,00.0";
ata_port = <0x0>;

                };

                led_green {
                        led_name = "syno_led0";
                };

                led_orange {
                        led_name = "syno_led1";
                };
        };
 

 

 

I'm sorry I just got to the server. I took a photo, maybe it will help us better. I need the second on the list of SSD Samsung to be

 

photo_2022-04-27_22-32-30.jpg

photo_2022-04-27_22-32-30 (2).jpg

photo_2022-04-27_22-32-29.jpg

photo_2022-04-27_22-32-28 (2).jpg

Link to comment
Share on other sites

1 hour ago, Kaneske said:

I can confirm it, worked like Vanilla. Great!

Which file did you use?  It appears I can download the 4.5MB .pat file.... but  "error 403" when I try to download the big file (over 340MB).

Link to comment
Share on other sites

Command " od -bc autonano.pat } | head -1 | awk '{print $3}' "  = 255 -> encrypted.

I tried to unpack/decrypt "autonano.pat" with command " sudo /bin/syno_extract_system_patch autonano.pat /tmp/pat" , but the "/tmp/pat" directory is empty. Maybe another command need...

 

Hmmm... I probe fresh install with cached "nano" .pat file. DSM installed without problem. Probe update to "7.1-42661 Update 1" version -> updated, worked. File "autonano.pat" -> now no problem -> maybe future :) (need change paths in scripts for auto download new files...) (maybe now "autonano.pat" empty? 5mb -> added encryption?) (Sorry my bad english...)

Edited by alexnoy123
Check "encrypted" file... Probe fresh install and update.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...