carlozo Posted April 13, 2022 Share #2501 Posted April 13, 2022 4 minutes ago, pocopico said: can you rerun only the last build part ? you mean like this ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh clean now ./rploader.sh build broadwellnk-7.1.0-42661 auto Quote Link to comment Share on other sites More sharing options...
carlozo Posted April 13, 2022 Share #2502 Posted April 13, 2022 10 minutes ago, carlozo said: you mean like this ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh clean now ./rploader.sh build broadwellnk-7.1.0-42661 auto File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, is encrypted File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, has been cached but its encrypted, re-running decrypting process Checking for cached pat file Found tinycore cache folder, linking to home/tc/custom-module Found locally cached pat file /home/tc/custom-module/ds3622xsp_42661.pat File /home/tc/custom-module/ds3622xsp_42661.pat, is encrypted Extracting encrypted pat file : /home/tc/custom-module/ds3622xsp_42661.pat to /tmp/pat sudo: /bin/syno_extract_system_patch: command not found extract latest pat Creating unecrypted pat file ds3622xsp_42661.pat to /home/tc/redpill-load/cache folder tar: ./VERSION: Not found in archive tar: Exiting with failure status due to previous errors Pat file sha256sum is : 4692a72c93969ff02f79453a9f8ee3ea2ff2332760b3ce32441bb798e4f72b7d Checking config file existence -> No config file found, please use the proper repo, clean and download again 10 minutes ago, carlozo said: Quote Link to comment Share on other sites More sharing options...
carlozo Posted April 13, 2022 Share #2503 Posted April 13, 2022 i try install a fresh install without use the 7.0.1-42218 maybe thats the problem or what Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 13, 2022 Share #2504 Posted April 13, 2022 does my user_config.json get saved during backup? and does it restored during clean command? or do I need to always replace config with my config for all future updates repairs etc to rploader? Quote Link to comment Share on other sites More sharing options...
Hong Kong Posted April 14, 2022 Share #2505 Posted April 14, 2022 Hello, I downloaded and burn tinycore-redpill.v0.4.6 to my USB drive and boot it to my HP Microserver Gen 8 with 4 disks. However, I cannot make it work. Commands shown below. My questions: My system is using Intel(R) Celeron(R) CPU G1610T @ 2.30GHz with 2GB RAM. Is the DS3615xs / bromolow-7.0.1-42218 a good choice? There is no modules.alias.3.json.gz modules.alias.4.json.gz latestrploader.sh on my drive. Is it normal? There are SSL certificate problem: certificate is not yet valid errors. Are they expected? Do I need the pciid 8086d00001c02 and pciid 102bd00000533 extensions? If yes, how can I locate and include them? Many thanks! tc@box:~$ sudo ./rploader.sh update now Checking Internet Access -> OK Checking if a newer version exists on the repo -> gzip: modules.alias.3.json.gz: No such file or directory gzip: modules.alias.4.json.gz: No such file or directory sha256sum: latestrploader.sh: No such file or directory There is a newer version of the script on the repo should we use that ? [yY/nN]Y OK, updating, please re-run after updating cp: cannot stat '/home/tc/latestrploader.sh': No such file or directory Updating tinycore loader with latest updates Backing up files to /mnt/sde3//mydata.tgz Done. tc@box:~$ tc@box:~$ sudo ./rploader.sh serialgen DS3615xs now Serial Number for Model : 1330LWN027197 Mac Address for Model DS3615xs : 00:11:32:C4:8A:21 Should i update the user_config.json with these values ? [Yy/Nn] Y tc@box:~$ tc@box:~$ sudo ./rploader.sh satamap now HBA: 00:1f.2 Disks : 6 SataPortMap=6 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] Y tc@box:~$ tc@box:~$ sudo ./rploader.sh identifyusb now Found USB SanDisk SerialNumber: 00003615093021102742 Vendor ID : 0x0781 Product ID : 0x5583 Should i update the user_config.json with these values ? [Yy/Nn] Y tc@box:~$ tc@box:~$ sudo ./rploader.sh build bromolow-7.0.1-42218 now Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : bromolow TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 3 MODULE_ALIAS_FILE= modules.alias.3.json Checking Internet Access -> OK Checking if a newer version exists on the repo -> gzip: modules.alias.3.json.gz: No such file or directory gzip: modules.alias.4.json.gz: No such file or directory sha256sum: latestrploader.sh: No such file or directory There is a newer version of the script on the repo should we use that ? [yY/nN]Y OK, updating, please re-run after updating cp: cannot stat '/home/tc/latestrploader.sh': No such file or directory Updating tinycore loader with latest updates Backing up files to /mnt/sde3//mydata.tgz Done. tc@box:~$ tc@box:~$ sudo ./rploader.sh ext bromolow-7.0.1-42218 auto Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : bromolow TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 3 MODULE_ALIAS_FILE= modules.alias.3.json Checking Internet Access -> OK Cloning into 'redpill-lkm'... fatal: unable to access 'https://github.com/RedPill-TTG/redpill-lkm.git/': SSL certificate problem: certificate is not yet valid Cloning into 'redpill-load'... fatal: unable to access 'https://github.com/jumkey/redpill-load.git/': SSL certificate problem: certificate is not yet valid Testing modules.alias.3.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found SATA Controller : pciid 8086d00001c02 Required Extension : No matching extension Found VGA Controller : pciid 102bd00000533 Required Extension : No matching extension Found Ethernet Interface : pciid 14e4d0000165f Required Extension : tg3.ko Searching for matching extension for tg3.ko Found Ethernet Interface : pciid 14e4d0000165f Required Extension : tg3.ko Searching for matching extension for tg3.ko ------------------------------------------------------------------------------------------------ tc@box:~$ Quote Link to comment Share on other sites More sharing options...
dreamtek Posted April 14, 2022 Share #2506 Posted April 14, 2022 dva3221 dont have virtio and acpid ext? build one and cant find ip in proxmox, change to e1000e ok Quote Link to comment Share on other sites More sharing options...
gadreel Posted April 14, 2022 Share #2507 Posted April 14, 2022 5 hours ago, phone guy said: does my user_config.json get saved during backup? and does it restored during clean command? or do I need to always replace config with my config for all future updates repairs etc to rploader? What I noticed when I updated to 7.1 is that the user_config.json was replaced during the "fullupgrade" command. The clean command did not replace my config. The "fullupgrade" command creates a backup of your previous files though somewhere in /home/tc/.../old.xxxx.{date} 1 Quote Link to comment Share on other sites More sharing options...
OzTechGeek Posted April 14, 2022 Share #2508 Posted April 14, 2022 @Pocopico and All I’m putting my documentation together for building my 2 new DS3622xs+ ESXI VM’s and had a question about extension URL’s. I noticed throughout this thread various URL’s been used in different forms, so is there a standard we should all use when using the “./rploader.sh ext <platform> add <url>”? Which is preferred long term: https://github.com/pocopico/rp-ext/blob/main/<extension>/rpext-index.json or https://raw.githubusercontent.com/pocopico/rp-ext/main/<extension>/rpext-index.json Thanks for all your hard work Quote Link to comment Share on other sites More sharing options...
OzTechGeek Posted April 14, 2022 Share #2509 Posted April 14, 2022 @pocopico and All When adding extensions and doing a build, is there a command, file or folder to check to see what extensions have been added after running a “./rploader.sh build <platform>”. I would like to check/verify what extensions are added in TCRP after doing a build, either on a standard build or one where I’ve added extensions. Thanks Quote Link to comment Share on other sites More sharing options...
OzTechGeek Posted April 14, 2022 Share #2510 Posted April 14, 2022 (edited) @Pocopico and All I’m putting my list together of what extensions to add for a standard DS3622xs+ ESXI VM build and have come up with the following so far: # “ACPI” ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/main/redpill-acpid/rpext-index.json # “MPT3SAS” ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/main/mpt3sas/rpext-index.json # “PVSCSI” ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/main/vmw_pvscsi/rpext-index.json # “VMXNET3” ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/main/vmxnet3/rpext-index.json The one I’m not sure about is the “redpill-misc” I can find it in the “redpill-load” repo but not in the “rp-ext” repo, should it be in the “rp-ext” repo? (Just my OCD kicking in that’s all) ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-misc/rpext-index.json I’ve seen mention of “Telnet Extension” before, but when I check the “rp-ext” repo there are actually 2 listed, not sure which one to use or if it’s even needed Extension Name: "Early telnet start" Description : "Simple extension which starts telnet early at boot" https://raw.githubusercontent.com/pocopico/rp-ext/master/early-telnet/rpext-index.json Extension Name: "Early telnet start" Description : "Simple extension which starts telnet early at boot" https://raw.githubusercontent.com/pocopico/rp-ext/master/raspbi-pill/rpext-index.json Are there any extension that would be “good to have” on a build for troubleshooting or information purposes? Thanks Edited April 14, 2022 by OzTechGeek Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted April 14, 2022 Share #2511 Posted April 14, 2022 8 hours ago, RedCat said: I added the acpi extension to loader: ./rploader.sh ext apollolake-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-acpid/rpext-index.json The build is successfull, it write acpi2 added to loader I start the dsm 7.1, it boot, but the power button dont work. If I press it, the dsm dont halt. I tired it before under 7.0.1, there it worked Same here on Proxmox Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 14, 2022 Share #2512 Posted April 14, 2022 This happens when the PAT download is interrupted, you need to clean and start again 7 hours ago, carlozo said: File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, is encrypted File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, has been cached but its encrypted, re-running decrypting process Checking for cached pat file Found tinycore cache folder, linking to home/tc/custom-module Found locally cached pat file /home/tc/custom-module/ds3622xsp_42661.pat File /home/tc/custom-module/ds3622xsp_42661.pat, is encrypted Extracting encrypted pat file : /home/tc/custom-module/ds3622xsp_42661.pat to /tmp/pat sudo: /bin/syno_extract_system_patch: command not found extract latest pat Creating unecrypted pat file ds3622xsp_42661.pat to /home/tc/redpill-load/cache folder tar: ./VERSION: Not found in archive tar: Exiting with failure status due to previous errors Pat file sha256sum is : 4692a72c93969ff02f79453a9f8ee3ea2ff2332760b3ce32441bb798e4f72b7d Checking config file existence -> No config file found, please use the proper repo, clean and download again 1 Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 14, 2022 Share #2513 Posted April 14, 2022 It seems that some drivers are incompatible with 7.1, I had issues updating a Microserver Gen8 with a mellanox Connext x 3 shutting down after installation, so I disabled the card, built the loader so that it does not include the mellanox driver, updated and then reenabled the card, after this the system booted up with no issues 1 Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 14, 2022 Share #2514 Posted April 14, 2022 2 hours ago, gadreel said: What I noticed when I updated to 7.1 is that the user_config.json was replaced during the "fullupgrade" command. The clean command did not replace my config. The "fullupgrade" command creates a backup of your previous files though somewhere in /home/tc/.../old.xxxx.{date} I had to redo one of my nas box (serial num issue) and on the first build, I forgot to check the user config, which got replaced with "stock" config I think after building the 701 image since I did a clean before building 7.1 image, so I had to rebuild 7.1 again with my user config... but if it does a backup, I just assumed clean replaced your files? I guess not... lesson learned, verify user config before issuing each build command. Quote Link to comment Share on other sites More sharing options...
seanone Posted April 14, 2022 Share #2515 Posted April 14, 2022 On 3/22/2022 at 9:20 PM, VRx666 said: I've been trying to install DS3615xs DS3617xs DS3622xs+ in VM (qemu/kvm). On DS3615xs ethernet port (e1000e) is flapping, can't get ip address. DS3622xs+ same problem. DS3617xs is ok., but when instaling OS always get at 55% possibly a corrupted file. less /var/log/synoupdate.log 2022/03/22 12:11:04 Start of the update... 2022/03/22 12:11:04 Upgrade from version 7.0.1.42218 to version 7.0.1.42218 2022/03/22 12:11:05 Failed to accomplish the update! (errno = 21) VID/PID set correctly, Sataportmap set correctly. PAT file checksum coresponds with sum for pat file which was used to build loader. @gadreel @seanone could You post some VM configuration for Unraid? There where a lot of problems on Unraid even with 6.2 and Jun's loader, but no one wants to share their knowledge. I don't know is this a community forum. Someone asked on Unraid forum, but noone answered, same here. This is my 6.23 DSM VM xml with jun's bootloader: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='10'> <name>DSM</name> <uuid>78a62f00-77c6-25de-686f-ebb133618c16</uuid> <metadata> <vmtemplate xmlns="unraid" name="Linux" icon="favicon.png" os="linux"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='6'/> <vcpupin vcpu='1' cpuset='16'/> <vcpupin vcpu='2' cpuset='7'/> <vcpupin vcpu='3' cpuset='17'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-6.1'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='2' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/DSM/DS918+_6.23-25426-1.04b-with_sn-unraid.img' index='3'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-TOSHIBA_AABBCCDDEE' index='2'/> <backingStore/> <target dev='hdd' bus='sata'/> <alias name='sata0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-ST2000DM006-AABBCCDDEE' index='1'/> <backingStore/> <target dev='hde' bus='sata'/> <alias name='sata0-0-4'/> <address type='drive' controller='0' bus='0' target='0' unit='4'/> </disk> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-to-pci-bridge'> <model name='pcie-pci-bridge'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x11'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x12'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0x13'/> <alias name='pci.5'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='00:11:32:44:55:66'/> <source bridge='br0'/> <target dev='vnet10'/> <model type='vmxnet3'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/2'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/2'> <source path='/dev/pts/2'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-10-DSM/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5901' autoport='yes' websocket='5701' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <audio id='1' type='none'/> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain> Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 14, 2022 Author Share #2516 Posted April 14, 2022 3 hours ago, OzTechGeek said: I’ve seen mention of “Telnet Extension” before, but when I check the “rp-ext” repo there are actually 2 listed, not sure which one to use or if it’s even needed Early telnet is not required anymore. Please note that ttyd (that is included in redpill-misc) rendered this extension obsolete. to access TTYD while in junior mode : open your browser in http://<yourip>:7681 the user is root. 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 14, 2022 Author Share #2517 Posted April 14, 2022 1 hour ago, phone guy said: I had to redo one of my nas box (serial num issue) and on the first build, I forgot to check the user config, which got replaced with "stock" config I think after building the 701 image since I did a clean before building 7.1 image, so I had to rebuild 7.1 again with my user config... but if it does a backup, I just assumed clean replaced your files? I guess not... lesson learned, verify user config before issuing each build command. Please note that when you do a fullupgrade the overwritten files will be moved to /home/tc/old 1 Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 14, 2022 Share #2518 Posted April 14, 2022 3 minutes ago, pocopico said: Please note that when you do a fullupgrade the overwritten files will be moved to /home/tc/old But never replaced automatically? so we have to manually move them back as needed. Good to know... A great option would be restore. Or check during build command if /tc/old/user_config.json exists, ask if we want to use its config file... just a suggestion. 1 Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 14, 2022 Share #2519 Posted April 14, 2022 12 minutes ago, pocopico said: Early telnet is not required anymore. Please note that ttyd (that is included in redpill-misc) rendered this extension obsolete. to access TTYD while in junior mode : open your browser in http://<yourip>:7681 the user is root. under 7.1 for me the ttyd connection is resettet every second. Quote Link to comment Share on other sites More sharing options...
gadreel Posted April 14, 2022 Share #2520 Posted April 14, 2022 (edited) @pocopico When I migrated from 6.2.3 to 7.0.1 the tinycore image was at version 0.4.4. Updating from 7.0.1 to 7.1, I run the update now and fullugrade commands on the existing 0.4.4 image and did not download the image version 0.4.6. Everything went well I just want to know if there is an issue if I remain on 0.4.4... Edited April 14, 2022 by gadreel Quote Link to comment Share on other sites More sharing options...
muziling Posted April 14, 2022 Share #2521 Posted April 14, 2022 (edited) dsm 7.1 918+ install step ,first step format disk failed. error log: Check new disk... umount: can't unmount /volume1: Invalid argument raidtool destroy 0 Not found /dev/md0 raidtool destroy 1 Not found /dev/md1 [CREATE] Raidtool initsys [CREATE][failed] Raidtool initsys Install on unraid, disk 1 is loader ,disk 2 is virtual as sata device . Edited April 14, 2022 by muziling Quote Link to comment Share on other sites More sharing options...
mitch55 Posted April 14, 2022 Share #2522 Posted April 14, 2022 (edited) On my N54L, it seems to have a problem with USB drivers (or other, I'm not an expert) : the control panel doesn't find my bluetooth. And it doesn't find my inverter (eaton ellipse pro 650). Is this working for someone? Edited April 14, 2022 by mitch55 Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 14, 2022 Share #2523 Posted April 14, 2022 I am going to build another box, this time an LSI sas card. Brand doesnt matter right? LSI 9211 8i IT mode (fujitsu brand if that matters). That should work as an 8 port card either in a vm/proxmox build or just a dedicated nas box, correct? Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 14, 2022 Share #2524 Posted April 14, 2022 23 hours ago, blindspot said: Hello, I have a ASUS X550J laptop and can't figure out sata map. It has 2 sata ports, one for hdd and one for odd, but the lspci says it has a 6-port sata controller. The pic bellow is with sataportmap=6 and diskidxmap=00. If I set sataportmap=2 and diskidxmap=00 it says no hdd found. Any ideea? Thanks @pocopico I had similar problem as @blindspot did.... I used the satamap command and got "sataportmap=2 and diskidxmap=00" and got similar error build 3622xs 7.1.0-42661. I changed sataportmap=1 and was able to see 1 hdd. I removed sataportmap line and was able to see 2 hdd. The board has 4 ports, couldn't get 3 and 4 to show a connected hdd. Was there ever a solution to this problem? Quote Link to comment Share on other sites More sharing options...
loveburn Posted April 14, 2022 Share #2525 Posted April 14, 2022 Guy's the internal antivirus can't update virus bases always error "Can't update virus base with freshclam (ext code:17 err code 2)" Anyone have same troubles? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.