RacerX Posted April 10, 2022 Share #2176 Posted April 10, 2022 I need a little asistance with the adaptec aic94xx extension My adaptec 71605 card does not show up in tc with lspci -v Here is what is says in proxmox 7.01 06:00.0 RAID bus controller: Adaptec Series 7 6G SAS/PCIe 3 (rev 01) Subsystem: Adaptec Series 7 - ASR-71605 - 16 internal 6G SAS Port/PCIe 3.0 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f7100000 (64-bit, non-prefetchable) [size=1M] Memory at f7280000 (64-bit, non-prefetchable) [size=1K] I/O ports at a000 [size=256] Expansion ROM at f7200000 [disabled] [size=512K] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+ Capabilities: [b0] MSI-X: Enable+ Count=64 Masked- Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [300] Secondary PCI Express Kernel driver in use: aacraid Kernel modules: aacraid uname -r 5.13.19-2-pve Will the extension work even if tc doesn't see the card? Quote Link to comment Share on other sites More sharing options...
shennn0 Posted April 10, 2022 Share #2177 Posted April 10, 2022 (edited) I need some help regarding Installation Loop on my xpenology installation. According RenegadeBE's post at https://xpenology.com/forum/topic/52847-dsm-701-42218/?do=findComment&comment=264321. the BAREMETAL - ASRock Rack C2550D4I should work. So i gave it a shot upgrading from DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader. The only difference is that my Xpenology is a ASRock Rack C2750D4I. (C2750D4I specs) These are the steps i did: ./rploader.sh update now ./rploader.sh serialgen DS315xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext bromolow-7.0.1-42218 auto ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json ./rploader.sh build bromolow-7.0.1-42218 With the Intel SATA as well as the two MARVELL SATA controllers enabled i got these SATA MAPS: sataportmap=42210 diskidxmap=0002040E When i disable both MARVELL SATA controllers these are my SATA MAPS: sataportmap=42 diskidxmap=0002 My setup is at one Btrfs RAID10 (4x 10Tb) and one ext4 SHR (1x 4Tb) After reboot i get stuck in infinite installation loop. i started telnet via: http://<your-dsm-ip-address>:5000/webman/start_telnet.cgi. and logged in via root Here is some debug information: tc@box:~$ lsscsi -Hv 00:00.0 Host bridge: Intel Corporation Atom processor C2000 SoC Transaction Router (rev 02) 00:01.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 1 (rev 02) 00:03.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 3 (rev 02) 00:04.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 4 (rev 02) 00:0e.0 Host bridge: Intel Corporation Atom processor C2000 RAS (rev 02) 00:0f.0 IOMMU: Intel Corporation Atom processor C2000 RCEC (rev 02) 00:13.0 System peripheral: Intel Corporation Atom processor C2000 SMBus 2.0 (rev 02) 00:16.0 USB controller: Intel Corporation Atom processor C2000 USB Enhanced Host Controller (rev 02) 00:17.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA2 Controller (rev 02) 00:18.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA3 Controller (rev 02) 00:1f.0 ISA bridge: Intel Corporation Atom processor C2000 PCU (rev 02) 00:1f.3 SMBus: Intel Corporation Atom processor C2000 PCU SMBus (rev 02) 01:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 01:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 02:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) 05:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 02) 06:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 21) 07:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) 08:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) 09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11) fdisk info: Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdb: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdb1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdc: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdc1 0,0,1 1023,254,63 1 976754645 976754645 3726G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sde: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sde1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdf: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdf1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sda: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sda1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) Disk /dev/md1: 2047 MB, 2147418112 bytes, 4194176 sectors 65534 cylinders, 2 heads, 4 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Disk /dev/md1 doesn't contain a valid partition table Disk /dev/synoboot: 1951 MB, 2045771776 bytes, 3995648 sectors 1022 cylinders, 63 heads, 62 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/synoboot1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux Partition 1 has different physical/logical start (non-Linux?): phys=(0,32,33) logical=(0,33,3) Partition 1 has different physical/logical end: phys=(6,62,56) logical=(25,43,36) /dev/synoboot2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux Partition 2 has different physical/logical start (non-Linux?): phys=(6,62,57) logical=(25,43,37) Partition 2 has different physical/logical end: phys=(15,205,62) logical=(65,0,62) /dev/synoboot3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux Partition 3 has different physical/logical start (non-Linux?): phys=(15,205,63) logical=(65,1,1) Partition 3 has different physical/logical end: phys=(130,138,8) logical=(536,57,2) and in the telnet the full /var/log/messages: Apr 10 00:57:21 syslogd started: BusyBox v1.30.1 Apr 10 00:57:21 kernel: klogd started: BusyBox v1.30.1 () Apr 10 00:57:21 kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 10 00:57:21 kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 10 00:57:21 kernel: [ 0.000000] Initializing cgroup subsys cpuacct Apr 10 00:57:21 kernel: [ 0.000000] Linux version 3.10.108 (root@build13) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:15:14 CST 2021 Apr 10 00:57:21 kernel: [ 0.000000] Command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=4 pid=0x2096 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac2=001132AE51FB mac3=001132A8EED2 Apr 10 00:57:21 kernel: [ 0.000000] KERNEL supported cpus: Apr 10 00:57:21 kernel: [ 0.000000] Intel GenuineIntel Apr 10 00:57:21 kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e3a2fff] usable Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007e3a3000-0x000000007edcafff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007edcb000-0x000000007eddafff] ACPI data Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007eddb000-0x000000007f4abfff] ACPI NVS Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007f4ac000-0x000000007f643fff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007f644000-0x000000007f7fffff] usable Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable Apr 10 00:57:21 kernel: [ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n') Apr 10 00:57:21 kernel: [ 0.000000] bootconsole [uart0] enabled Apr 10 00:57:21 kernel: [ 0.000000] NX (Execute Disable) protection: active Apr 10 00:57:21 kernel: [ 0.000000] SMBIOS 2.8 present. Apr 10 00:57:21 kernel: [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./C2750D4I, BIOS P3.10 01/24/2018 Apr 10 00:57:21 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Apr 10 00:57:21 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable Apr 10 00:57:21 kernel: [ 0.000000] e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000 Apr 10 00:57:21 kernel: [ 0.000000] MTRR default type: write-back Apr 10 00:57:21 kernel: [ 0.000000] MTRR fixed ranges enabled: Apr 10 00:57:21 kernel: [ 0.000000] 00000-9FFFF write-back Apr 10 00:57:21 kernel: [ 0.000000] A0000-BFFFF uncachable Apr 10 00:57:21 kernel: [ 0.000000] C0000-E7FFF write-through Apr 10 00:57:21 kernel: [ 0.000000] E8000-FFFFF write-protect Apr 10 00:57:21 kernel: [ 0.000000] MTRR variable ranges enabled: Apr 10 00:57:21 kernel: [ 0.000000] 0 base 080000000 mask F80000000 uncachable Apr 10 00:57:21 kernel: [ 0.000000] 1 base 880000000 mask F80000000 uncachable Apr 10 00:57:21 kernel: [ 0.000000] 2 base 900000000 mask F00000000 uncachable Apr 10 00:57:21 kernel: [ 0.000000] 3 base A00000000 mask E00000000 uncachable Apr 10 00:57:21 kernel: [ 0.000000] 4 base C00000000 mask C00000000 uncachable Apr 10 00:57:21 kernel: [ 0.000000] 5 base 07F800000 mask FFF800000 uncachable Apr 10 00:57:21 kernel: [ 0.000000] 6 disabled Apr 10 00:57:21 kernel: [ 0.000000] 7 disabled Apr 10 00:57:21 kernel: [ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000 Apr 10 00:57:21 kernel: [ 0.000000] found SMP MP-table at [mem 0x000fd2e0-0x000fd2ef] mapped at [ffff8800000fd2e0] Apr 10 00:57:21 kernel: [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x00000000-0x000fffff] page 4k Apr 10 00:57:21 kernel: [ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE Apr 10 00:57:21 kernel: [ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE Apr 10 00:57:21 kernel: [ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x87fe00000-0x87fffffff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x87fe00000-0x87fffffff] page 2M Apr 10 00:57:21 kernel: [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x87c000000-0x87fdfffff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x87c000000-0x87fdfffff] page 2M Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x800000000-0x87bffffff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x800000000-0x87bffffff] page 2M Apr 10 00:57:21 kernel: [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7e3a2fff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x00100000-0x001fffff] page 4k Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x00200000-0x7e1fffff] page 2M Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x7e200000-0x7e3a2fff] page 4k Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x7f644000-0x7f7fffff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x7f644000-0x7f7fffff] page 4k Apr 10 00:57:21 kernel: [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE Apr 10 00:57:21 kernel: [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff] Apr 10 00:57:21 kernel: [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M Apr 10 00:57:21 kernel: [ 0.000000] log_buf_len: 33554432 Apr 10 00:57:21 kernel: [ 0.000000] early log buf free: 1043596(99%) Apr 10 00:57:21 kernel: [ 0.000000] RAMDISK: [mem 0x35979000-0x36cb3fff] Apr 10 00:57:21 kernel: [ 0.000000] ACPI: RSDP 0x00000000000F0540 00024 (v02 ALASKA) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: XSDT 0x000000007EDD5098 000AC (v01 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FACP 0x000000007EDD9258 0010C (v05 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: DSDT 0x000000007EDD51D0 04084 (v02 ALASKA A M I 01072009 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FACS 0x000000007F4A9F80 00040 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FPDT 0x000000007EDD9368 00044 (v01 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FIDT 0x000000007EDD93B0 0009C (v01 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: HPET 0x000000007EDD9450 00038 (v01 ALASKA 00000001 MSFT 01000013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: AAFT 0x000000007EDD9488 0004E (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: SPMI 0x000000007EDD94D8 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: MCFG 0x000000007EDD9518 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: WDAT 0x000000007EDD9558 001AC (v01 ALASKA A M I 01072009 MSFT 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: UEFI 0x000000007EDD9708 00042 (v01 00000000 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: APIC 0x000000007EDD9750 00098 (v03 INTEL TIANO 00000001 MSFT 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: BDAT 0x000000007EDD97E8 00030 (v01 00000000 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: SSDT 0x000000007EDD9818 009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: SPCR 0x000000007EDDA210 00050 (v01 A M I APTIO V 01072009 AMI. 00000005) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: HEST 0x000000007EDDA260 000A8 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: BERT 0x000000007EDDA308 00030 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: ERST 0x000000007EDDA338 00230 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: EINJ 0x000000007EDDA568 00150 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Apr 10 00:57:21 kernel: [ 0.000000] [ffffea0000000000-ffffea001dbfffff] PMD -> [ffff88085d600000-ffff8808795fffff] on node 0 Apr 10 00:57:21 kernel: [ 0.000000] Zone ranges: Apr 10 00:57:21 kernel: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] Apr 10 00:57:21 kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] Apr 10 00:57:21 kernel: [ 0.000000] Normal [mem 0x100000000-0x87fffffff] Apr 10 00:57:21 kernel: [ 0.000000] Movable zone start for each node Apr 10 00:57:21 kernel: [ 0.000000] Early memory node ranges Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x00001000-0x00099fff] Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x00100000-0x7e3a2fff] Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x7f644000-0x7f7fffff] Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x100000000-0x87fffffff] Apr 10 00:57:21 kernel: [ 0.000000] On node 0 totalpages: 8381688 Apr 10 00:57:21 kernel: [ 0.000000] DMA zone: 56 pages used for memmap Apr 10 00:57:21 kernel: [ 0.000000] DMA zone: 21 pages reserved Apr 10 00:57:21 kernel: [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 Apr 10 00:57:21 kernel: [ 0.000000] DMA32 zone: 7019 pages used for memmap Apr 10 00:57:21 kernel: [ 0.000000] DMA32 zone: 513375 pages, LIFO batch:31 Apr 10 00:57:21 kernel: [ 0.000000] Normal zone: 107520 pages used for memmap Apr 10 00:57:21 kernel: [ 0.000000] Normal zone: 7864320 pages, LIFO batch:31 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Apr 10 00:57:21 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IRQ0 used by override. Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IRQ2 used by override. Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IRQ9 used by override. Apr 10 00:57:21 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Apr 10 00:57:21 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Apr 10 00:57:21 kernel: [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs Apr 10 00:57:21 kernel: [ 0.000000] nr_irqs_gsi: 40 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007e3a3000 - 000000007edcb000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007edcb000 - 000000007eddb000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007eddb000 - 000000007f4ac000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007f4ac000 - 000000007f644000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007f800000 - 00000000e0000000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed01000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed04000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed0c000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed0c000 - 00000000fed10000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1c000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed1d000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1d000 - 00000000fef00000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000ff800000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 Apr 10 00:57:21 kernel: [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices Apr 10 00:57:21 kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 Apr 10 00:57:21 kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88087dc00000 s80704 r8192 d21696 u262144 Apr 10 00:57:21 kernel: [ 0.000000] pcpu-alloc: s80704 r8192 d21696 u262144 alloc=1*2097152 Apr 10 00:57:21 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Apr 10 00:57:21 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8267072 Apr 10 00:57:21 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=4 pid=0x2096 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac2=001132AE51FB mac3=00113 Apr 10 00:57:21 kernel: [ 0.000000] Synology Hardware Version: DS3615xs-j Apr 10 00:57:21 kernel: [ 0.000000] Internal netif num: 4 Apr 10 00:57:21 kernel: [ 0.000000] Mac2: 001132AE51FB Apr 10 00:57:21 kernel: [ 0.000000] Mac3: 001132A8EED2 Apr 10 00:57:21 kernel: [ 0.000000] Mac1: 0011321E1D8D Apr 10 00:57:21 kernel: [ 0.000000] Mac4: 001132C887AA Apr 10 00:57:21 kernel: [ 0.000000] Serial Number: 1230LWN026973 Apr 10 00:57:21 kernel: [ 0.000000] Disk Index Map: 0002040E Apr 10 00:57:21 kernel: [ 0.000000] Vender format version: 2 Apr 10 00:57:21 kernel: [ 0.000000] Power on seq num: 0 Apr 10 00:57:21 kernel: [ 0.000000] Sata Port Map: 42210 Apr 10 00:57:21 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Apr 10 00:57:21 kernel: [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Apr 10 00:57:21 kernel: [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Apr 10 00:57:21 kernel: [ 0.000000] Memory: 32887640k/35651584k available (4820k kernel code, 2124832k absent, 639112k reserved, 4065k data, 828k init) Apr 10 00:57:21 kernel: [ 0.000000] Kernel/User page tables isolation: disabled Apr 10 00:57:21 kernel: [ 0.000000] Hierarchical RCU implementation. Apr 10 00:57:21 kernel: [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 Apr 10 00:57:21 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Apr 10 00:57:21 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 Apr 10 00:57:21 kernel: [ 0.000000] Console: colour dummy device 80x25 Apr 10 00:57:21 kernel: [ 0.000000] console [ttyS0] enabled, bootconsole disabled Apr 10 00:57:21 kernel: [ 0.000000] allocated 134217728 bytes of page_cgroup Apr 10 00:57:21 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Apr 10 00:57:21 kernel: [ 0.000000] hpet clockevent registered Apr 10 00:57:21 kernel: [ 0.000000] tsc: Fast TSC calibration using PIT Apr 10 00:57:21 kernel: [ 0.001000] tsc: Detected 2400.097 MHz processor Apr 10 00:57:21 kernel: [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.19 BogoMIPS (lpj=2400097) Apr 10 00:57:21 kernel: [ 0.000563] pid_max: default: 32768 minimum: 301 Apr 10 00:57:21 kernel: [ 0.000860] Security Framework initialized Apr 10 00:57:21 kernel: [ 0.001088] AppArmor: AppArmor initialized Apr 10 00:57:21 kernel: [ 0.001320] Mount-cache hash table entries: 256 Apr 10 00:57:21 kernel: [ 0.001795] Initializing cgroup subsys memory Apr 10 00:57:21 kernel: [ 0.002041] Initializing cgroup subsys devices Apr 10 00:57:21 kernel: [ 0.002277] Initializing cgroup subsys freezer Apr 10 00:57:21 kernel: [ 0.002514] Initializing cgroup subsys blkio Apr 10 00:57:21 kernel: [ 0.002776] CPU: Physical Processor ID: 0 Apr 10 00:57:21 kernel: [ 0.002990] CPU: Processor Core ID: 0 Apr 10 00:57:21 kernel: [ 0.006992] mce: CPU supports 6 MCE banks Apr 10 00:57:21 kernel: [ 0.007214] CPU0: Thermal monitoring enabled (TM1) Apr 10 00:57:21 kernel: [ 0.007472] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Apr 10 00:57:21 kernel: [ 0.007472] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 Apr 10 00:57:21 kernel: [ 0.007472] tlb_flushall_shift: 6 Apr 10 00:57:21 kernel: [ 0.008206] FEATURE SPEC_CTRL Present Apr 10 00:57:21 kernel: [ 0.008402] FEATURE IBPB_SUPPORT Present Apr 10 00:57:21 kernel: [ 0.008613] Spectre V2 : Vulnerable Apr 10 00:57:21 kernel: [ 0.008902] Freeing SMP alternatives: 20k freed Apr 10 00:57:21 kernel: [ 0.009150] ACPI: Core revision 20130328 Apr 10 00:57:21 kernel: [ 0.012395] ACPI: All ACPI Tables successfully acquired Apr 10 00:57:21 kernel: [ 0.013594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Apr 10 00:57:21 kernel: [ 0.023937] smpboot: CPU0: Intel(R) Atom(TM) CPU C2750 @ 2.40GHz (fam: 06, model: 4d, stepping: 08) Apr 10 00:57:21 kernel: [ 0.024451] TSC deadline timer enabled Apr 10 00:57:21 kernel: [ 0.024665] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. Apr 10 00:57:21 kernel: [ 0.025140] ... version: 3 Apr 10 00:57:21 kernel: [ 0.025353] ... bit width: 40 Apr 10 00:57:21 kernel: [ 0.025571] ... generic registers: 2 Apr 10 00:57:21 kernel: [ 0.025788] ... value mask: 000000ffffffffff Apr 10 00:57:21 kernel: [ 0.026068] ... max period: 000000007fffffff Apr 10 00:57:21 kernel: [ 0.026347] ... fixed-purpose events: 3 Apr 10 00:57:21 kernel: [ 0.026560] ... event mask: 0000000700000003 Apr 10 00:57:21 kernel: [ 0.029042] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK Apr 10 00:57:21 kernel: [ 0.148429] Brought up 8 CPUs Apr 10 00:57:21 kernel: [ 0.148594] smpboot: Total of 8 processors activated (38401.55 BogoMIPS) Apr 10 00:57:21 kernel: [ 0.149705] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. Apr 10 00:57:21 kernel: [ 0.150517] devtmpfs: initialized Apr 10 00:57:21 kernel: [ 0.151051] PM: Registering ACPI NVS region [mem 0x7eddb000-0x7f4abfff] (7147520 bytes) Apr 10 00:57:21 kernel: [ 0.153328] NET: Registered protocol family 16 Apr 10 00:57:21 kernel: [ 0.154280] ACPI: bus type PCI registered Apr 10 00:57:21 kernel: [ 0.154686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Apr 10 00:57:21 kernel: [ 0.155171] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Apr 10 00:57:21 kernel: [ 0.155527] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) Apr 10 00:57:21 kernel: [ 0.156134] PCI: Using configuration type 1 for base access Apr 10 00:57:21 kernel: [ 0.162923] bio: create slab <bio-0> at 0 Apr 10 00:57:21 kernel: [ 0.163428] ACPI: Added _OSI(Module Device) Apr 10 00:57:21 kernel: [ 0.163651] ACPI: Added _OSI(Processor Device) Apr 10 00:57:21 kernel: [ 0.163887] ACPI: Added _OSI(3.0 _SCP Extensions) Apr 10 00:57:21 kernel: [ 0.164137] ACPI: Added _OSI(Processor Aggregator Device) Apr 10 00:57:21 kernel: [ 0.165273] ACPI: EC: Look up EC in DSDT Apr 10 00:57:21 kernel: [ 0.215507] ACPI: SSDT 0x000000007E5B0518 00490 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.216205] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.216438] ACPI: SSDT 0x0000000000000000 00490 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.217018] ACPI: SSDT 0x000000007E5AEC98 001FA (v01 PmRef Cpu0Cst 00003001 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.217710] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.217943] ACPI: SSDT 0x0000000000000000 001FA (v01 PmRef Cpu0Cst 00003001 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.227368] ACPI: SSDT 0x000000007E5B0A18 0047A (v01 PmRef ApIst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.228162] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.228396] ACPI: SSDT 0x0000000000000000 0047A (v01 PmRef ApIst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.233222] ACPI: SSDT 0x000000007E5AFD98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.233939] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.234177] ACPI: SSDT 0x0000000000000000 00119 (v01 PmRef ApCst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.240205] ACPI: Interpreter enabled Apr 10 00:57:21 kernel: [ 0.240407] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568) Apr 10 00:57:21 kernel: [ 0.240913] ACPI: (supports S0 S5) Apr 10 00:57:21 kernel: [ 0.241097] ACPI: Using IOAPIC for interrupt routing Apr 10 00:57:21 kernel: [ 0.241486] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Apr 10 00:57:21 kernel: [ 0.242039] ACPI: No dock devices found. Apr 10 00:57:21 kernel: [ 0.250834] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Apr 10 00:57:21 kernel: [ 0.251448] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) Apr 10 00:57:21 kernel: [ 0.252097] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted Apr 10 00:57:21 kernel: [ 0.252662] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge Apr 10 00:57:21 kernel: [ 0.253272] PCI host bridge to bus 0000:00 Apr 10 00:57:21 kernel: [ 0.253500] pci_bus 0000:00: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 0.253790] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] Apr 10 00:57:21 kernel: [ 0.254115] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] Apr 10 00:57:21 kernel: [ 0.254440] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Apr 10 00:57:21 kernel: [ 0.254805] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] Apr 10 00:57:21 kernel: [ 0.255165] pci_bus 0000:00: root bus resource [mem 0x880000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 0.255541] pci 0000:00:00.0: [8086:1f01] type 00 class 0x060000 Apr 10 00:57:21 kernel: [ 0.256014] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.256346] pci 0000:00:01.0: reg 10: [mem 0xdf740000-0xdf75ffff 64bit] Apr 10 00:57:21 kernel: [ 0.256737] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.257130] pci 0000:00:01.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.257509] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.257841] pci 0000:00:03.0: reg 10: [mem 0xdf720000-0xdf73ffff 64bit] Apr 10 00:57:21 kernel: [ 0.258237] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.258622] pci 0000:00:03.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.259001] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.259340] pci 0000:00:04.0: reg 10: [mem 0xdf700000-0xdf71ffff 64bit] Apr 10 00:57:21 kernel: [ 0.259731] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.260115] pci 0000:00:04.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.260504] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000 Apr 10 00:57:21 kernel: [ 0.260973] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600 Apr 10 00:57:21 kernel: [ 0.261343] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.261809] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000 Apr 10 00:57:21 kernel: [ 0.262142] pci 0000:00:13.0: reg 10: [mem 0xdf764000-0xdf7643ff 64bit] Apr 10 00:57:21 kernel: [ 0.262724] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320 Apr 10 00:57:21 kernel: [ 0.263065] pci 0000:00:16.0: reg 10: [mem 0xdf763000-0xdf7633ff] Apr 10 00:57:21 kernel: [ 0.263493] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.263888] pci 0000:00:16.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.264267] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.264600] pci 0000:00:17.0: reg 10: [io 0xe0d0-0xe0d7] Apr 10 00:57:21 kernel: [ 0.264897] pci 0000:00:17.0: reg 14: [io 0xe0c0-0xe0c3] Apr 10 00:57:21 kernel: [ 0.265189] pci 0000:00:17.0: reg 18: [io 0xe0b0-0xe0b7] Apr 10 00:57:21 kernel: [ 0.265480] pci 0000:00:17.0: reg 1c: [io 0xe0a0-0xe0a3] Apr 10 00:57:21 kernel: [ 0.265771] pci 0000:00:17.0: reg 20: [io 0xe040-0xe05f] Apr 10 00:57:21 kernel: [ 0.266068] pci 0000:00:17.0: reg 24: [mem 0xdf762000-0xdf7627ff] Apr 10 00:57:21 kernel: [ 0.266428] pci 0000:00:17.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.266844] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.267183] pci 0000:00:18.0: reg 10: [io 0xe090-0xe097] Apr 10 00:57:21 kernel: [ 0.267474] pci 0000:00:18.0: reg 14: [io 0xe080-0xe083] Apr 10 00:57:21 kernel: [ 0.267766] pci 0000:00:18.0: reg 18: [io 0xe070-0xe077] Apr 10 00:57:21 kernel: [ 0.268057] pci 0000:00:18.0: reg 1c: [io 0xe060-0xe063] Apr 10 00:57:21 kernel: [ 0.268352] pci 0000:00:18.0: reg 20: [io 0xe020-0xe03f] Apr 10 00:57:21 kernel: [ 0.268644] pci 0000:00:18.0: reg 24: [mem 0xdf761000-0xdf7617ff] Apr 10 00:57:21 kernel: [ 0.269002] pci 0000:00:18.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.269428] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100 Apr 10 00:57:21 kernel: [ 0.269940] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500 Apr 10 00:57:21 kernel: [ 0.270270] pci 0000:00:1f.3: reg 10: [mem 0xdf760000-0xdf76001f] Apr 10 00:57:21 kernel: [ 0.270626] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f] Apr 10 00:57:21 kernel: [ 0.271162] pci 0000:01:00.0: [8086:10fb] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.271495] pci 0000:01:00.0: reg 10: [mem 0xdfe80000-0xdfefffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.271877] pci 0000:01:00.0: reg 18: [io 0xd020-0xd03f] Apr 10 00:57:21 kernel: [ 0.272183] pci 0000:01:00.0: reg 20: [mem 0xdff04000-0xdff07fff 64bit pref] Apr 10 00:57:21 kernel: [ 0.272604] pci 0000:01:00.0: PME# supported from D0 D3hot Apr 10 00:57:21 kernel: [ 0.272938] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.273306] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.273766] pci 0000:01:00.1: [8086:10fb] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.274106] pci 0000:01:00.1: reg 10: [mem 0xdfe00000-0xdfe7ffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.274483] pci 0000:01:00.1: reg 18: [io 0xd000-0xd01f] Apr 10 00:57:21 kernel: [ 0.274788] pci 0000:01:00.1: reg 20: [mem 0xdff00000-0xdff03fff 64bit pref] Apr 10 00:57:21 kernel: [ 0.275214] pci 0000:01:00.1: PME# supported from D0 D3hot Apr 10 00:57:21 kernel: [ 0.275537] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.275905] pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.278281] pci 0000:00:01.0: PCI bridge to [bus 01] Apr 10 00:57:21 kernel: [ 0.278548] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Apr 10 00:57:21 kernel: [ 0.278873] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfffffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.279384] pci 0000:02:00.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.279713] pci 0000:02:00.0: reg 10: [mem 0xdf500000-0xdf51ffff] Apr 10 00:57:21 kernel: [ 0.280105] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.282447] pci 0000:00:03.0: PCI bridge to [bus 02-08] Apr 10 00:57:21 kernel: [ 0.282726] pci 0000:00:03.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.283048] pci 0000:00:03.0: bridge window [mem 0xde000000-0xdf5fffff] Apr 10 00:57:21 kernel: [ 0.283536] pci 0000:03:01.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.283936] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.284365] pci 0000:03:05.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.284771] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.285201] pci 0000:03:07.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.285601] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.286036] pci 0000:03:09.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.286436] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.286876] pci 0000:02:00.0: PCI bridge to [bus 03-08] Apr 10 00:57:21 kernel: [ 0.287164] pci 0000:02:00.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.287487] pci 0000:02:00.0: bridge window [mem 0xde000000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.287971] pci 0000:04:00.0: [1b4b:9172] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.288309] pci 0000:04:00.0: reg 10: [io 0xb040-0xb047] Apr 10 00:57:21 kernel: [ 0.288605] pci 0000:04:00.0: reg 14: [io 0xb030-0xb033] Apr 10 00:57:21 kernel: [ 0.288899] pci 0000:04:00.0: reg 18: [io 0xb020-0xb027] Apr 10 00:57:21 kernel: [ 0.289194] pci 0000:04:00.0: reg 1c: [io 0xb010-0xb013] Apr 10 00:57:21 kernel: [ 0.289494] pci 0000:04:00.0: reg 20: [io 0xb000-0xb00f] Apr 10 00:57:21 kernel: [ 0.289789] pci 0000:04:00.0: reg 24: [mem 0xdf410000-0xdf4101ff] Apr 10 00:57:21 kernel: [ 0.290120] pci 0000:04:00.0: reg 30: [mem 0xdf400000-0xdf40ffff pref] Apr 10 00:57:21 kernel: [ 0.290520] pci 0000:04:00.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.292508] pci 0000:03:01.0: PCI bridge to [bus 04] Apr 10 00:57:21 kernel: [ 0.292777] pci 0000:03:01.0: bridge window [io 0xb000-0xbfff] Apr 10 00:57:21 kernel: [ 0.293099] pci 0000:03:01.0: bridge window [mem 0xdf400000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.293596] pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.294044] pci 0000:05:00.0: supports D1 D2 Apr 10 00:57:21 kernel: [ 0.294272] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.294723] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Apr 10 00:57:21 kernel: [ 0.295252] pci 0000:03:05.0: PCI bridge to [bus 05-06] Apr 10 00:57:21 kernel: [ 0.295533] pci 0000:03:05.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.295861] pci 0000:03:05.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.296379] pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000 Apr 10 00:57:21 kernel: [ 0.296726] pci 0000:06:00.0: reg 10: [mem 0xde000000-0xdeffffff] Apr 10 00:57:21 kernel: [ 0.297068] pci 0000:06:00.0: reg 14: [mem 0xdf000000-0xdf01ffff] Apr 10 00:57:21 kernel: [ 0.297405] pci 0000:06:00.0: reg 18: [io 0xa000-0xa07f] Apr 10 00:57:21 kernel: [ 0.297803] pci 0000:06:00.0: supports D1 D2 Apr 10 00:57:21 kernel: [ 0.298031] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.298536] pci 0000:05:00.0: PCI bridge to [bus 06] Apr 10 00:57:21 kernel: [ 0.298808] pci 0000:05:00.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.299132] pci 0000:05:00.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.299648] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.299986] pci 0000:07:00.0: reg 10: [mem 0xdf300000-0xdf37ffff] Apr 10 00:57:21 kernel: [ 0.300335] pci 0000:07:00.0: reg 18: [io 0x9000-0x901f] Apr 10 00:57:21 kernel: [ 0.300640] pci 0000:07:00.0: reg 1c: [mem 0xdf380000-0xdf383fff] Apr 10 00:57:21 kernel: [ 0.301085] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.302647] pci 0000:03:07.0: PCI bridge to [bus 07] Apr 10 00:57:21 kernel: [ 0.302916] pci 0000:03:07.0: bridge window [io 0x9000-0x9fff] Apr 10 00:57:21 kernel: [ 0.303239] pci 0000:03:07.0: bridge window [mem 0xdf300000-0xdf3fffff] Apr 10 00:57:21 kernel: [ 0.303743] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.304081] pci 0000:08:00.0: reg 10: [mem 0xdf200000-0xdf27ffff] Apr 10 00:57:21 kernel: [ 0.304429] pci 0000:08:00.0: reg 18: [io 0x8000-0x801f] Apr 10 00:57:21 kernel: [ 0.304734] pci 0000:08:00.0: reg 1c: [mem 0xdf280000-0xdf283fff] Apr 10 00:57:21 kernel: [ 0.305179] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.306742] pci 0000:03:09.0: PCI bridge to [bus 08] Apr 10 00:57:21 kernel: [ 0.307011] pci 0000:03:09.0: bridge window [io 0x8000-0x8fff] Apr 10 00:57:21 kernel: [ 0.307334] pci 0000:03:09.0: bridge window [mem 0xdf200000-0xdf2fffff] Apr 10 00:57:21 kernel: [ 0.307828] pci 0000:09:00.0: [1b4b:9230] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.308157] pci 0000:09:00.0: reg 10: [io 0xc050-0xc057] Apr 10 00:57:21 kernel: [ 0.308449] pci 0000:09:00.0: reg 14: [io 0xc040-0xc043] Apr 10 00:57:21 kernel: [ 0.308747] pci 0000:09:00.0: reg 18: [io 0xc030-0xc037] Apr 10 00:57:21 kernel: [ 0.309040] pci 0000:09:00.0: reg 1c: [io 0xc020-0xc023] Apr 10 00:57:21 kernel: [ 0.309333] pci 0000:09:00.0: reg 20: [io 0xc000-0xc01f] Apr 10 00:57:21 kernel: [ 0.309626] pci 0000:09:00.0: reg 24: [mem 0xdf610000-0xdf6107ff] Apr 10 00:57:21 kernel: [ 0.309959] pci 0000:09:00.0: reg 30: [mem 0xdf600000-0xdf60ffff pref] Apr 10 00:57:21 kernel: [ 0.310346] pci 0000:09:00.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.311967] pci 0000:00:04.0: PCI bridge to [bus 09] Apr 10 00:57:21 kernel: [ 0.312233] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] Apr 10 00:57:21 kernel: [ 0.312555] pci 0000:00:04.0: bridge window [mem 0xdf600000-0xdf6fffff] Apr 10 00:57:21 kernel: [ 0.312928] pci_bus 0000:00: on NUMA node 0 Apr 10 00:57:21 kernel: [ 0.313282] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12) Apr 10 00:57:21 kernel: [ 0.313766] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12) Apr 10 00:57:21 kernel: [ 0.314255] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 *10 11 12) Apr 10 00:57:21 kernel: [ 0.314737] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 10 *11 12) Apr 10 00:57:21 kernel: [ 0.315226] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *7 10 11 12) Apr 10 00:57:21 kernel: [ 0.315707] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12) Apr 10 00:57:21 kernel: [ 0.316197] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12) Apr 10 00:57:21 kernel: [ 0.316679] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12) Apr 10 00:57:21 kernel: [ 0.317853] ACPI: Enabled 1 GPEs in block 00 to 1F Apr 10 00:57:21 kernel: [ 0.318133] acpi root: \_SB_.PCI0 notify handler is installed Apr 10 00:57:21 kernel: [ 0.318474] Found 1 acpi root devices Apr 10 00:57:21 kernel: [ 0.318963] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none Apr 10 00:57:21 kernel: [ 0.319385] vgaarb: loaded Apr 10 00:57:21 kernel: [ 0.319541] vgaarb: bridge control possible 0000:06:00.0 Apr 10 00:57:21 kernel: [ 0.320056] SCSI subsystem initialized Apr 10 00:57:21 kernel: [ 0.320258] ACPI: bus type ATA registered Apr 10 00:57:21 kernel: [ 0.320653] libata version 3.00 loaded. Apr 10 00:57:21 kernel: [ 0.321040] pps_core: LinuxPPS API ver. 1 registered Apr 10 00:57:21 kernel: [ 0.321302] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> Apr 10 00:57:21 kernel: [ 0.321842] PTP clock support registered Apr 10 00:57:21 kernel: [ 0.322221] PCI: Using ACPI for IRQ routing Apr 10 00:57:21 kernel: [ 0.323371] PCI: pci_cache_line_size set to 64 bytes Apr 10 00:57:21 kernel: [ 0.323710] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] Apr 10 00:57:21 kernel: [ 0.324030] e820: reserve RAM buffer [mem 0x7e3a3000-0x7fffffff] Apr 10 00:57:21 kernel: [ 0.324346] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff] Apr 10 00:57:21 kernel: [ 0.325023] Switching to clocksource hpet Apr 10 00:57:21 kernel: [ 0.333331] AppArmor: AppArmor Filesystem Enabled Apr 10 00:57:21 kernel: [ 0.343428] pnp: PnP ACPI init Apr 10 00:57:21 kernel: [ 0.343606] ACPI: bus type PNP registered Apr 10 00:57:21 kernel: [ 0.343940] pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active) Apr 10 00:57:21 kernel: [ 0.344674] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved Apr 10 00:57:21 kernel: [ 0.345040] system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved Apr 10 00:57:21 kernel: [ 0.345416] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Apr 10 00:57:21 kernel: [ 0.345812] pnp 00:02: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:01:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.346443] pnp 00:02: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:01:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.347065] pnp 00:02: disabling [mem 0x000c0000-0x000dffff disabled] because it overlaps 0000:01:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.347738] pnp 00:02: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.348422] pnp 00:02: disabling [mem 0x000c0000-0x000dffff disabled] because it overlaps 0000:01:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.349083] pnp 00:02: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.349752] pnp 00:02: disabling [mem 0x000c0000-0x000dffff disabled] because it overlaps 0000:01:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.350425] pnp 00:02: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.351188] system 00:02: [io 0x0680-0x069f] has been reserved Apr 10 00:57:21 kernel: [ 0.351516] system 00:02: [io 0x0400-0x047f] has been reserved Apr 10 00:57:21 kernel: [ 0.351832] system 00:02: [io 0x0500-0x05fe] has been reserved Apr 10 00:57:21 kernel: [ 0.352144] system 00:02: [mem 0xfed00000-0xfedfffff] could not be reserved Apr 10 00:57:21 kernel: [ 0.352524] system 00:02: [mem 0xffa00000-0xffffffff] has been reserved Apr 10 00:57:21 kernel: [ 0.352871] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved Apr 10 00:57:21 kernel: [ 0.353219] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Apr 10 00:57:21 kernel: [ 0.353690] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Apr 10 00:57:21 kernel: [ 0.354185] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Apr 10 00:57:21 kernel: [ 0.354906] ACPI: IRQ 4 override to edge, high Apr 10 00:57:21 kernel: [ 0.355149] pnp 00:05: [dma 0 disabled] Apr 10 00:57:21 kernel: [ 0.355491] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) Apr 10 00:57:21 kernel: [ 0.356171] ACPI: IRQ 3 override to edge, high Apr 10 00:57:21 kernel: [ 0.356428] pnp 00:06: [dma 0 disabled] Apr 10 00:57:21 kernel: [ 0.356760] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) Apr 10 00:57:21 kernel: [ 0.357398] system 00:07: [io 0x0a00-0x0a0f] has been reserved Apr 10 00:57:21 kernel: [ 0.357711] system 00:07: [io 0x0a10-0x0a1f] has been reserved Apr 10 00:57:21 kernel: [ 0.358023] system 00:07: [io 0x0a20-0x0a2f] has been reserved Apr 10 00:57:21 kernel: [ 0.358346] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Apr 10 00:57:21 kernel: [ 0.358916] pnp 00:08: Plug and Play ACPI device, IDs IPI0001 (active) Apr 10 00:57:21 kernel: [ 0.359394] pnp: PnP ACPI: found 9 devices Apr 10 00:57:21 kernel: [ 0.359613] ACPI: bus type PNP unregistered Apr 10 00:57:21 kernel: [ 0.372202] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 400000 Apr 10 00:57:21 kernel: [ 0.372754] pci 0000:00:01.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 Apr 10 00:57:21 kernel: [ 0.373224] pci 0000:00:01.0: BAR 14: assigned [mem 0x80000000-0x803fffff] Apr 10 00:57:21 kernel: [ 0.373605] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.373967] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.374336] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.374698] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.375060] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.375433] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.375794] pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.376156] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.376527] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.376889] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.377242] pci 0000:01:00.0: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.377773] pci 0000:01:00.0: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.378301] pci 0000:01:00.1: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.378837] pci 0000:01:00.1: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.379382] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.379734] pci 0000:01:00.0: BAR 7: assigned [mem 0x80000000-0x800fffff 64bit] Apr 10 00:57:21 kernel: [ 0.380134] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.380497] pci 0000:01:00.0: BAR 10: assigned [mem 0x80100000-0x801fffff 64bit] Apr 10 00:57:21 kernel: [ 0.380900] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.381253] pci 0000:01:00.1: BAR 7: assigned [mem 0x80200000-0x802fffff 64bit] Apr 10 00:57:21 kernel: [ 0.381664] pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.382017] pci 0000:01:00.1: BAR 10: assigned [mem 0x80300000-0x803fffff 64bit] Apr 10 00:57:21 kernel: [ 0.382419] pci 0000:00:01.0: PCI bridge to [bus 01] Apr 10 00:57:21 kernel: [ 0.382684] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Apr 10 00:57:21 kernel: [ 0.383007] pci 0000:00:01.0: bridge window [mem 0x80000000-0x803fffff] Apr 10 00:57:21 kernel: [ 0.383374] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfffffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.383784] pci 0000:03:01.0: PCI bridge to [bus 04] Apr 10 00:57:21 kernel: [ 0.384049] pci 0000:03:01.0: bridge window [io 0xb000-0xbfff] Apr 10 00:57:21 kernel: [ 0.384389] pci 0000:03:01.0: bridge window [mem 0xdf400000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.384752] pci 0000:05:00.0: PCI bridge to [bus 06] Apr 10 00:57:21 kernel: [ 0.385017] pci 0000:05:00.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.385350] pci 0000:05:00.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.385717] pci 0000:03:05.0: PCI bridge to [bus 05-06] Apr 10 00:57:21 kernel: [ 0.385994] pci 0000:03:05.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.386317] pci 0000:03:05.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.386687] pci 0000:03:07.0: PCI bridge to [bus 07] Apr 10 00:57:21 kernel: [ 0.386951] pci 0000:03:07.0: bridge window [io 0x9000-0x9fff] Apr 10 00:57:21 kernel: [ 0.387275] pci 0000:03:07.0: bridge window [mem 0xdf300000-0xdf3fffff] Apr 10 00:57:21 kernel: [ 0.387649] pci 0000:03:09.0: PCI bridge to [bus 08] Apr 10 00:57:21 kernel: [ 0.387914] pci 0000:03:09.0: bridge window [io 0x8000-0x8fff] Apr 10 00:57:21 kernel: [ 0.388237] pci 0000:03:09.0: bridge window [mem 0xdf200000-0xdf2fffff] Apr 10 00:57:21 kernel: [ 0.388610] pci 0000:02:00.0: PCI bridge to [bus 03-08] Apr 10 00:57:21 kernel: [ 0.388888] pci 0000:02:00.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.389211] pci 0000:02:00.0: bridge window [mem 0xde000000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.389581] pci 0000:00:03.0: PCI bridge to [bus 02-08] Apr 10 00:57:21 kernel: [ 0.389858] pci 0000:00:03.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.390181] pci 0000:00:03.0: bridge window [mem 0xde000000-0xdf5fffff] Apr 10 00:57:21 kernel: [ 0.390558] pci 0000:00:04.0: PCI bridge to [bus 09] Apr 10 00:57:21 kernel: [ 0.390822] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] Apr 10 00:57:21 kernel: [ 0.391145] pci 0000:00:04.0: bridge window [mem 0xdf600000-0xdf6fffff] Apr 10 00:57:21 kernel: [ 0.391932] pci 0000:00:04.0: can't derive routing for PCI INT A Apr 10 00:57:21 kernel: [ 0.392249] pci 0000:00:04.0: PCI INT A: no GSI Apr 10 00:57:21 kernel: [ 0.392505] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Apr 10 00:57:21 kernel: [ 0.392800] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Apr 10 00:57:21 kernel: [ 0.393094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Apr 10 00:57:21 kernel: [ 0.393436] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff] Apr 10 00:57:21 kernel: [ 0.393765] pci_bus 0000:00: resource 8 [mem 0x880000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 0.394103] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] Apr 10 00:57:21 kernel: [ 0.394405] pci_bus 0000:01: resource 1 [mem 0x80000000-0x803fffff] Apr 10 00:57:21 kernel: [ 0.394734] pci_bus 0000:01: resource 2 [mem 0xdfe00000-0xdfffffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.395112] pci_bus 0000:02: resource 0 [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.395413] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf5fffff] Apr 10 00:57:21 kernel: [ 0.395743] pci_bus 0000:03: resource 0 [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.396037] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.396381] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] Apr 10 00:57:21 kernel: [ 0.396675] pci_bus 0000:04: resource 1 [mem 0xdf400000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.397005] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.397298] pci_bus 0000:05: resource 1 [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.397635] pci_bus 0000:06: resource 0 [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.397930] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.398259] pci_bus 0000:07: resource 0 [io 0x9000-0x9fff] Apr 10 00:57:21 kernel: [ 0.398560] pci_bus 0000:07: resource 1 [mem 0xdf300000-0xdf3fffff] Apr 10 00:57:21 kernel: [ 0.398890] pci_bus 0000:08: resource 0 [io 0x8000-0x8fff] Apr 10 00:57:21 kernel: [ 0.399184] pci_bus 0000:08: resource 1 [mem 0xdf200000-0xdf2fffff] Apr 10 00:57:21 kernel: [ 0.399525] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] Apr 10 00:57:21 kernel: [ 0.399819] pci_bus 0000:09: resource 1 [mem 0xdf600000-0xdf6fffff] Apr 10 00:57:21 kernel: [ 0.400266] NET: Registered protocol family 2 Apr 10 00:57:21 kernel: [ 0.400860] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Apr 10 00:57:21 kernel: [ 0.402361] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Apr 10 00:57:21 kernel: [ 0.402985] TCP: Hash tables configured (established 262144 bind 65536) Apr 10 00:57:21 kernel: [ 0.403408] TCP: reno registered Apr 10 00:57:21 kernel: [ 0.403591] UDP hash table entries: 16384 (order: 7, 524288 bytes) Apr 10 00:57:21 kernel: [ 0.404103] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) Apr 10 00:57:21 kernel: [ 0.404769] NET: Registered protocol family 1 Apr 10 00:57:21 kernel: [ 0.415502] pci 0000:06:00.0: Boot video device Apr 10 00:57:21 kernel: [ 0.415760] PCI: CLS 64 bytes, default 64 Apr 10 00:57:21 kernel: [ 1.406968] Trying to unpack rootfs image as initramfs... Apr 10 00:57:21 kernel: [ 1.433006] Freeing initrd memory: 19692k freed Apr 10 00:57:21 kernel: [ 1.441511] redpill: module verification failed: signature and/or required key missing - tainting kernel Apr 10 00:57:21 kernel: [ 1.458661] PCI host bridge to bus 0001:07 Apr 10 00:57:21 kernel: [ 1.462773] pci_bus 0001:07: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.468961] pci_bus 0001:07: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.475933] pci_bus 0001:07: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.481439] pci 0001:07:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.487626] pci 0001:07:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.493099] PCI host bridge to bus 0001:08 Apr 10 00:57:21 kernel: [ 1.497215] pci_bus 0001:08: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.503402] pci_bus 0001:08: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.510376] pci_bus 0001:08: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.515878] pci 0001:08:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.522067] pci 0001:08:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.527551] PCI host bridge to bus 0001:09 Apr 10 00:57:21 kernel: [ 1.531662] pci_bus 0001:09: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.537855] pci_bus 0001:09: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.544828] pci_bus 0001:09: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.550331] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.556515] pci 0001:09:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.561990] PCI host bridge to bus 0001:0a Apr 10 00:57:21 kernel: [ 1.566097] pci_bus 0001:0a: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.572289] pci_bus 0001:0a: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.579263] pci_bus 0001:0a: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.584764] pci 0001:0a:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.590945] pci 0001:0a:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.607956] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Apr 10 00:57:21 kernel: [ 1.614428] software IO TLB [mem 0x7a3a3000-0x7e3a3000] (64MB) mapped at [ffff88007a3a3000-ffff88007e3a2fff] Apr 10 00:57:21 kernel: [ 1.638285] Initialise module verification Apr 10 00:57:21 kernel: [ 1.642494] audit: initializing netlink socket (disabled) Apr 10 00:57:21 kernel: [ 1.647940] type=2000 audit(1649552195.580:1): initialized Apr 10 00:57:21 kernel: [ 1.671626] bounce pool size: 64 pages Apr 10 00:57:21 kernel: [ 1.675777] VFS: Disk quotas dquot_6.5.2 Apr 10 00:57:21 kernel: [ 1.679800] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Apr 10 00:57:21 kernel: [ 1.686699] msgmni has been set to 32768 Apr 10 00:57:21 kernel: [ 1.691038] Key type asymmetric registered Apr 10 00:57:21 kernel: [ 1.695162] Asymmetric key parser 'x509' registered Apr 10 00:57:21 kernel: [ 1.700247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) Apr 10 00:57:21 kernel: [ 1.707683] io scheduler noop registered Apr 10 00:57:21 kernel: [ 1.711623] io scheduler deadline registered Apr 10 00:57:21 kernel: [ 1.715947] io scheduler cfq registered (default) Apr 10 00:57:21 kernel: [ 1.720950] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.726615] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.732279] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.737947] pcieport 0000:02:00.0: irq 43 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.743634] pcieport 0000:03:01.0: irq 44 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.749309] pcieport 0000:03:05.0: irq 45 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.754979] pcieport 0000:03:07.0: irq 46 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.760671] pcieport 0000:03:09.0: irq 47 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.766561] aer 0000:00:01.0:pcie02: service driver aer loaded Apr 10 00:57:21 kernel: [ 1.772479] aer 0000:00:03.0:pcie02: service driver aer loaded Apr 10 00:57:21 kernel: [ 1.778350] aer 0000:00:04.0:pcie02: service driver aer loaded Apr 10 00:57:21 kernel: [ 2.182992] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Apr 10 00:57:21 kernel: [ 2.210448] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 10 00:57:21 kernel: [ 2.237924] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Apr 10 00:57:21 kernel: [ 2.281433] brd: module loaded Apr 10 00:57:21 kernel: [ 2.289966] Loading iSCSI transport class v2.0-870. Apr 10 00:57:21 kernel: [ 2.304044] rdac: device handler registered Apr 10 00:57:21 kernel: [ 2.309079] ahci 0000:00:17.0: version 3.0 Apr 10 00:57:21 kernel: [ 2.313389] ahci 0000:00:17.0: irq 48 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.328893] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode Apr 10 00:57:21 kernel: [ 2.337007] ahci 0000:00:17.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds apst Apr 10 00:57:21 kernel: [ 2.345465] ahci 0000:00:17.0: setting latency timer to 64 Apr 10 00:57:21 kernel: [ 2.355744] scsi0 : ahci Apr 10 00:57:21 kernel: [ 2.360054] scsi1 : ahci Apr 10 00:57:21 kernel: [ 2.363167] scsi2 : ahci Apr 10 00:57:21 kernel: [ 2.366198] scsi3 : ahci Apr 10 00:57:21 kernel: [ 2.369153] ata1: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762100 irq 48 Apr 10 00:57:21 kernel: [ 2.376569] ata2: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762180 irq 48 Apr 10 00:57:21 kernel: [ 2.383986] ata3: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762200 irq 48 Apr 10 00:57:21 kernel: [ 2.391390] ata4: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762280 irq 48 Apr 10 00:57:21 kernel: [ 2.398964] ahci 0000:00:18.0: irq 49 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.403918] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Apr 10 00:57:21 kernel: [ 2.412016] ahci 0000:00:18.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds apst Apr 10 00:57:21 kernel: [ 2.420466] ahci 0000:00:18.0: setting latency timer to 64 Apr 10 00:57:21 kernel: [ 2.427319] scsi4 : ahci Apr 10 00:57:21 kernel: [ 2.430944] scsi5 : ahci Apr 10 00:57:21 kernel: [ 2.433963] ata5: SATA max UDMA/133 abar m2048@0xdf761000 port 0xdf761100 irq 49 Apr 10 00:57:21 kernel: [ 2.441375] ata6: SATA max UDMA/133 abar m2048@0xdf761000 port 0xdf761180 irq 49 Apr 10 00:57:21 kernel: [ 2.448942] ahci 0000:04:00.0: irq 50 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.453907] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Apr 10 00:57:21 kernel: [ 2.462015] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs Apr 10 00:57:21 kernel: [ 2.471426] scsi6 : ahci Apr 10 00:57:21 kernel: [ 2.474947] scsi7 : ahci Apr 10 00:57:21 kernel: [ 2.477994] ata7: SATA max UDMA/133 abar m512@0xdf410000 port 0xdf410100 irq 50 Apr 10 00:57:21 kernel: [ 2.485324] ata8: SATA max UDMA/133 abar m512@0xdf410000 port 0xdf410180 irq 50 Apr 10 00:57:21 kernel: [ 2.492785] ahci 0000:09:00.0: irq 51 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.497694] ahci 0000:09:00.0: controller can do FBS, turning on CAP_FBS Apr 10 00:57:21 kernel: [ 2.515012] ahci 0000:09:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode Apr 10 00:57:21 kernel: [ 2.523199] ahci 0000:09:00.0: flags: 64bit ncq fbs pio Apr 10 00:57:21 kernel: [ 2.529280] scsi8 : ahci Apr 10 00:57:21 kernel: [ 2.532239] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610100 irq 51 Apr 10 00:57:21 kernel: [ 2.539678] ahci: probe of 0001:07:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.545450] ahci: probe of 0001:08:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.551218] ahci: probe of 0001:09:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.556987] ahci: probe of 0001:0a:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.563796] rtc_cmos 00:03: RTC can wake from S4 Apr 10 00:57:21 kernel: [ 2.568767] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Apr 10 00:57:21 kernel: [ 2.574910] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs Apr 10 00:57:21 kernel: [ 2.582301] i2c /dev entries driver Apr 10 00:57:21 kernel: [ 2.587425] md: raid1 personality registered for level 1 Apr 10 00:57:21 kernel: [ 2.592786] cpuidle: using governor ladder Apr 10 00:57:21 kernel: [ 2.596896] cpuidle: using governor menu Apr 10 00:57:21 kernel: [ 2.600977] TCP: cubic registered Apr 10 00:57:21 kernel: [ 2.604313] NET: Registered protocol family 17 Apr 10 00:57:21 kernel: [ 2.608784] Key type dns_resolver registered Apr 10 00:57:21 kernel: [ 2.626103] tsc: Refined TSC clocksource calibration: 2399.999 MHz Apr 10 00:57:21 kernel: [ 2.632323] Switching to clocksource tsc Apr 10 00:57:21 kernel: [ 2.704155] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 00:57:21 kernel: [ 2.710368] ata4: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.715798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 00:57:21 kernel: [ 2.722007] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 00:57:21 kernel: [ 2.731358] ata3.00: ATA-9: HGST HUS726T4TALN6L4, VKGNW460, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.738071] ata3.00: 976754646 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.745120] ata3.00: SN:V1G62ZAB Apr 10 00:57:21 kernel: [ 2.748368] ata2.00: ATA-9: HGST HUH721010ALN600, LHGNT384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.753209] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 10 00:57:21 kernel: [ 2.753238] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 10 00:57:21 kernel: [ 2.763741] ata6.00: ATA-9: HGST HUH721010ALN604, LHGNW384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.763743] ata6.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.763744] ata6.00: SN:1SHW2RBZ Apr 10 00:57:21 kernel: [ 2.766744] ata5.00: ATA-9: HGST HUH721010ALN604, LHGNW384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.766746] ata5.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.766747] ata5.00: SN:1SHVBTPZ Apr 10 00:57:21 kernel: [ 2.770191] ata6.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.774170] ata5.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.801250] ata8: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.801303] ata7: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.820973] ata2.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.828109] ata2.00: SN:1EK1PJ3Z Apr 10 00:57:21 kernel: [ 2.834749] ata3.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.841902] ata2.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.846196] ata1.00: ATA-9: HGST HUH721010ALN600, LHGNT384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.846209] ata9: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.858310] ata1.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.865448] ata1.00: SN:1EK17LNZ Apr 10 00:57:21 kernel: [ 2.876065] ata1.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.880687] scsi 0:0:0:0: Direct-Access HGST HUH721010ALN600 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.890051] sd 0:0:0:0: [sda] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.898008] sd 0:0:0:0: [sda] Write Protect is off Apr 10 00:57:21 kernel: [ 2.899567] scsi 1:0:0:0: Direct-Access HGST HUH721010ALN600 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.900115] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.900199] sd 1:0:0:0: [sdb] Write Protect is off Apr 10 00:57:21 kernel: [ 2.900202] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 2.900240] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 2.900591] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.901335] scsi 2:0:0:0: Direct-Access HGST HUS726T4TALN6L4 VKGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.904711] sd 2:0:0:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB) Apr 10 00:57:21 kernel: [ 2.904800] sd 2:0:0:0: [sdc] Write Protect is off Apr 10 00:57:21 kernel: [ 2.904803] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 2.904842] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 2.906316] sd 2:0:0:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB) Apr 10 00:57:21 kernel: [ 2.907041] scsi 4:0:0:0: Direct-Access HGST HUH721010ALN604 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.908694] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 2.945831] sdb: sdb1 sdb2 sdb3 Apr 10 00:57:21 kernel: [ 2.946664] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.946787] sd 1:0:0:0: [sdb] Attached SCSI disk Apr 10 00:57:21 kernel: [ 2.955337] sdc: sdc1 sdc2 sdc3 Apr 10 00:57:21 kernel: [ 2.957003] sd 2:0:0:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB) Apr 10 00:57:21 kernel: [ 2.957128] sd 2:0:0:0: [sdc] Attached SCSI disk Apr 10 00:57:21 kernel: [ 3.033989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 3.039120] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 3.048650] sd 0:0:0:0: [sda] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 3.110145] sda: sda1 sda2 sda3 Apr 10 00:57:21 kernel: [ 3.114292] sd 0:0:0:0: [sda] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 3.122330] sd 0:0:0:0: [sda] Attached SCSI disk Apr 10 00:57:21 kernel: [ 3.909106] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 3.912196] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 4.916916] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 4.919995] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 5.924714] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 5.927791] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 6.932472] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 6.935548] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 7.940247] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 7.943323] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 8.948061] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 8.951146] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 9.955858] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 9.958937] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 10.963617] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 10.966696] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 11.971393] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 11.974472] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 12.979208] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 12.982292] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 13.986958] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 13.990017] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 14.994789] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 14.997871] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 16.002566] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 16.005639] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 17.010354] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 17.013440] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 18.018147] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 18.021503] sd 4:0:0:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 18.022166] scsi 5:0:0:0: Direct-Access HGST HUH721010ALN604 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 18.022512] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 18.042895] sd 4:0:0:0: [sdd] Write Protect is off Apr 10 00:57:21 kernel: [ 18.047705] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 18.052810] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 18.062238] sd 4:0:0:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 18.117029] sdd: sdd1 sdd2 sdd3 Apr 10 00:57:21 kernel: [ 18.121131] sd 4:0:0:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 18.129133] sd 4:0:0:0: [sdd] Attached SCSI disk Apr 10 00:57:21 kernel: [ 19.022930] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 19.026018] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 20.030711] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 20.033787] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 21.038496] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 21.041562] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 22.046291] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 22.049379] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 23.054052] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 23.057115] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 24.061858] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 24.064935] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 25.069642] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 25.072709] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 26.077435] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 26.080529] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 27.085198] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 27.088261] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 28.093004] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 28.096074] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 29.100756] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 29.103823] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 30.108582] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 30.111670] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 31.116344] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 31.119411] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 32.124150] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 32.127220] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 33.131935] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 33.135287] sd 5:0:0:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 33.143286] sd 5:0:0:0: [sde] Write Protect is off Apr 10 00:57:21 kernel: [ 33.148122] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 33.153223] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 33.162578] sd 5:0:0:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 33.223631] sde: sde1 sde2 sde3 Apr 10 00:57:21 kernel: [ 33.227735] sd 5:0:0:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 33.235776] sd 5:0:0:0: [sde] Attached SCSI disk Apr 10 00:57:21 kernel: [ 33.240439] Loading module verification blacklist certificates Apr 10 00:57:21 kernel: [ 33.246284] Loading module verification certificates Apr 10 00:57:21 kernel: [ 33.251317] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: ' Apr 10 00:57:21 kernel: [ 33.263330] MODSIGN: Loaded cert 'Synology Root Certification Authority: ' Apr 10 00:57:21 kernel: [ 33.273700] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: ' Apr 10 00:57:21 kernel: [ 33.285553] MODSIGN: Loaded cert 'Synology kernel module signing key: ' Apr 10 00:57:21 kernel: [ 33.295665] registered taskstats version 1 Apr 10 00:57:21 kernel: [ 33.300307] rtc_cmos 00:03: setting system clock to 2022-04-10 00:57:07 UTC (1649552227) Apr 10 00:57:21 kernel: [ 33.309803] Freeing unused kernel memory: 828k freed Apr 10 00:57:21 kernel: [ 33.314974] Write protecting the kernel read-only data: 8192k Apr 10 00:57:21 kernel: [ 33.320911] Freeing unused kernel memory: 1312k freed Apr 10 00:57:21 kernel: [ 33.327836] Freeing unused kernel memory: 480k freed Apr 10 00:57:21 kernel: [ 33.428032] ACPI: bus type USB registered Apr 10 00:57:21 kernel: [ 33.432382] usbcore: registered new interface driver usbfs Apr 10 00:57:21 kernel: [ 33.438011] usbcore: registered new interface driver hub Apr 10 00:57:21 kernel: [ 33.443494] usbcore: registered new interface driver ethub Apr 10 00:57:21 kernel: [ 33.449147] usbcore: registered new device driver usb Apr 10 00:57:21 kernel: [ 33.469709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Apr 10 00:57:21 kernel: [ 33.483084] ehci-pci: EHCI PCI platform driver Apr 10 00:57:21 kernel: [ 33.488136] ehci-pci 0000:00:16.0: setting latency timer to 64 Apr 10 00:57:21 kernel: [ 33.494001] ehci-pci 0000:00:16.0: EHCI Host Controller Apr 10 00:57:21 kernel: [ 33.499238] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 Apr 10 00:57:21 kernel: [ 33.506651] ehci-pci 0000:00:16.0: debug port 2 Apr 10 00:57:21 kernel: [ 33.515092] ehci-pci 0000:00:16.0: cache line size of 64 is not supported Apr 10 00:57:21 kernel: [ 33.521910] ehci-pci 0000:00:16.0: irq 23, io mem 0xdf763000 Apr 10 00:57:21 kernel: [ 33.533220] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 Apr 10 00:57:21 kernel: [ 33.539432] hub 1-0:1.0: USB hub found Apr 10 00:57:21 kernel: [ 33.543206] hub 1-0:1.0: 8 ports detected Apr 10 00:57:21 kernel: [ 33.557582] uhci_hcd: USB Universal Host Controller Interface driver Apr 10 00:57:21 kernel: [ 33.598666] usbcore: registered new interface driver usb-storage Apr 10 00:57:21 kernel: [ 33.620523] dca service started, version 1.12.1 Apr 10 00:57:21 kernel: [ 33.630026] Intel(R) Gigabit Ethernet Linux Driver - version 5.7.2 Apr 10 00:57:21 kernel: [ 33.637488] Copyright(c) 2007 - 2021 Intel Corporation. Apr 10 00:57:21 kernel: [ 33.644615] igb 0000:07:00.0: irq 52 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.649421] igb 0000:07:00.0: irq 53 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.704132] igb 0000:07:00.0: added PHC on eth0 Apr 10 00:57:21 kernel: [ 33.708694] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Linux Driver Apr 10 00:57:21 kernel: [ 33.715054] igb 0000:07:00.0: eth0: (PCIe:2.5GT/s:Width x1) Apr 10 00:57:21 kernel: [ 33.720720] igb 0000:07:00.0 eth0: MAC: d0:50:99:c2:b3:af Apr 10 00:57:21 kernel: [ 33.726170] igb 0000:07:00.0: eth0: PBA No: 001300-000 Apr 10 00:57:21 kernel: [ 33.735369] igb 0000:07:00.0: LRO is disabled Apr 10 00:57:21 kernel: [ 33.739742] igb 0000:07:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) Apr 10 00:57:21 kernel: [ 33.747834] igb 0000:08:00.0: irq 54 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.752647] igb 0000:08:00.0: irq 55 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.807810] igb 0000:08:00.0: added PHC on eth1 Apr 10 00:57:21 kernel: [ 33.812361] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Linux Driver Apr 10 00:57:21 kernel: [ 33.818723] igb 0000:08:00.0: eth1: (PCIe:2.5GT/s:Width x1) Apr 10 00:57:21 kernel: [ 33.824396] igb 0000:08:00.0 eth1: MAC: d0:50:99:c2:b3:b0 Apr 10 00:57:21 kernel: [ 33.829855] igb 0000:08:00.0: eth1: PBA No: 001300-000 Apr 10 00:57:21 kernel: [ 33.838452] igb 0000:08:00.0: LRO is disabled Apr 10 00:57:21 kernel: [ 33.842846] igb 0000:08:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) Apr 10 00:57:21 kernel: [ 33.873472] usb 1-1: new high-speed USB device number 2 using ehci-pci Apr 10 00:57:21 kernel: [ 34.014902] Got empty serial number. Generate serial number from product. Apr 10 00:57:21 kernel: [ 34.022203] hub 1-1:1.0: USB hub found Apr 10 00:57:21 kernel: [ 34.026140] hub 1-1:1.0: 4 ports detected Apr 10 00:57:21 kernel: [ 34.313868] usb 1-1.1: new high-speed USB device number 3 using ehci-pci Apr 10 00:57:21 kernel: [ 34.417374] usb-storage 1-1.1:1.0: USB Mass Storage device detected Apr 10 00:57:21 kernel: [ 34.423775] scsi9 : usb-storage 1-1.1:1.0 Apr 10 00:57:21 kernel: [ 34.512031] usb 1-1.2: new high-speed USB device number 4 using ehci-pci Apr 10 00:57:21 kernel: [ 34.525947] md: md1 stopped. Apr 10 00:57:21 kernel: [ 34.531690] md: bind<sdb2> Apr 10 00:57:21 kernel: [ 34.534670] md: bind<sdc2> Apr 10 00:57:21 kernel: [ 34.537616] md: bind<sdd2> Apr 10 00:57:21 kernel: [ 34.540569] md: bind<sde2> Apr 10 00:57:21 kernel: [ 34.543466] md: bind<sda2> Apr 10 00:57:21 kernel: [ 34.546568] md/raid1:md1: active with 5 out of 16 mirrors Apr 10 00:57:21 kernel: [ 34.604363] md1: detected capacity change from 0 to 2147418112 Apr 10 00:57:21 kernel: [ 34.610720] md1: unknown partition table Apr 10 00:57:21 kernel: [ 34.623266] hub 1-1.2:1.0: USB hub found Apr 10 00:57:21 kernel: [ 34.627361] hub 1-1.2:1.0: 3 ports detected Apr 10 00:57:21 kernel: [ 34.630916] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k Apr 10 00:57:21 kernel: [ 34.707502] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 10 00:57:21 kernel: [ 34.713061] sd 1:0:0:0: Attached scsi generic sg1 type 0 Apr 10 00:57:21 kernel: [ 34.718592] sd 2:0:0:0: Attached scsi generic sg2 type 0 Apr 10 00:57:21 kernel: [ 34.723939] usb 1-1.4: new high-speed USB device number 5 using ehci-pci Apr 10 00:57:21 scemd: scemd.c:805(main) start scemd Apr 10 00:57:21 kernel: [ 34.724148] sd 4:0:0:0: Attached scsi generic sg3 type 0 Apr 10 00:57:21 kernel: [ 34.724333] sd 5:0:0:0: Attached scsi generic sg4 type 0 Apr 10 00:57:21 kernel: [ 34.840683] hub 1-1.4:1.0: USB hub found Apr 10 00:57:21 kernel: [ 34.842624] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.4-NAPI Apr 10 00:57:21 kernel: [ 34.842625] e1000e: Copyright(c) 1999 - 2019 Intel Corporation. Apr 10 00:57:21 kernel: [ 34.857169] hub 1-1.4:1.0: 5 ports detected Apr 10 00:57:21 kernel: [ 34.880941] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.5.5 Apr 10 00:57:21 kernel: [ 34.887932] Copyright(c) 1999 - 2019 Intel Corporation. Apr 10 00:57:21 kernel: [ 34.949370] usb 1-1.2.2: new low-speed USB device number 6 using ehci-pci Apr 10 00:57:21 kernel: [ 35.053017] ixgbe 0000:01:00.0: irq 56 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.058006] ixgbe 0000:01:00.0: irq 57 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.060197] Got empty serial number. Generate serial number from product. Apr 10 00:57:21 kernel: [ 35.069777] ixgbe 0000:01:00.0: irq 58 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.074768] ixgbe 0000:01:00.0: irq 59 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.079749] ixgbe 0000:01:00.0: irq 60 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.084728] ixgbe 0000:01:00.0: irq 61 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.089704] ixgbe 0000:01:00.0: irq 62 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.094684] ixgbe 0000:01:00.0: irq 63 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.099669] ixgbe 0000:01:00.0: irq 64 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.104695] ixgbe 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Apr 10 00:57:21 kernel: [ 35.199695] usb 1-1.4.4: new low-speed USB device number 7 using ehci-pci Apr 10 00:57:21 kernel: [ 35.211292] ixgbe 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) Apr 10 00:57:21 kernel: [ 35.225417] ixgbe 0000:01:00.0 eth2: MAC: 2, PHY: 20, SFP+: 5, PBA No: E70854-008 Apr 10 00:57:21 kernel: [ 35.232915] ixgbe 0000:01:00.0: 90:e2:ba:86:30:28 Apr 10 00:57:21 kernel: [ 35.237635] ixgbe 0000:01:00.0 eth2: Enabled Features: RxQ: 8 TxQ: 8 FdirHash Apr 10 00:57:21 kernel: [ 35.244938] ixgbe 0000:01:00.0 eth2: Intel(R) 10 Gigabit Network Connection Apr 10 00:57:21 kernel: [ 35.368816] Got empty serial number. Generate serial number from product. Apr 10 00:57:21 kernel: [ 35.413307] ixgbe 0000:01:00.1: irq 65 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.418287] ixgbe 0000:01:00.1: irq 66 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.423268] ixgbe 0000:01:00.1: irq 67 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.428242] ixgbe 0000:01:00.1: irq 68 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.433240] ixgbe 0000:01:00.1: irq 69 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.433763] scsi 9:0:0:0: Direct-Access Generic Flash Disk 5.00 PQ: 0 ANSI: 2 Apr 10 00:57:21 kernel: [ 35.434646] sd 9:0:0:0: Attached scsi generic sg5 type 0 Apr 10 00:57:21 kernel: [ 35.438445] sd 9:0:0:0: [synoboot] 3995648 512-byte logical blocks: (2.04 GB/1.90 GiB) Apr 10 00:57:21 kernel: [ 35.439157] sd 9:0:0:0: [synoboot] Write Protect is off Apr 10 00:57:21 kernel: [ 35.439162] sd 9:0:0:0: [synoboot] Mode Sense: 0b 00 00 08 Apr 10 00:57:21 kernel: [ 35.447653] sd 9:0:0:0: [synoboot] No Caching mode page found Apr 10 00:57:21 kernel: [ 35.447655] sd 9:0:0:0: [synoboot] Assuming drive cache: write through Apr 10 00:57:21 kernel: [ 35.465560] sd 9:0:0:0: [synoboot] No Caching mode page found Apr 10 00:57:21 kernel: [ 35.465562] sd 9:0:0:0: [synoboot] Assuming drive cache: write through Apr 10 00:57:21 kernel: [ 35.466151] synoboot: synoboot1 synoboot2 synoboot3 Apr 10 00:57:21 kernel: [ 35.477564] sd 9:0:0:0: [synoboot] No Caching mode page found Apr 10 00:57:21 kernel: [ 35.477566] sd 9:0:0:0: [synoboot] Assuming drive cache: write through Apr 10 00:57:21 kernel: [ 35.477570] sd 9:0:0:0: [synoboot] Attached SCSI removable disk Apr 10 00:57:21 kernel: [ 35.518815] ixgbe 0000:01:00.1: irq 70 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.523794] ixgbe 0000:01:00.1: irq 71 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.528769] ixgbe 0000:01:00.1: irq 72 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.533752] ixgbe 0000:01:00.1: irq 73 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.538776] ixgbe 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Apr 10 00:57:21 kernel: [ 35.644010] ixgbe 0000:01:00.1: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) Apr 10 00:57:21 kernel: [ 35.658107] ixgbe 0000:01:00.1 eth3: MAC: 2, PHY: 14, SFP+: 4, PBA No: E70854-008 Apr 10 00:57:21 kernel: [ 35.665607] ixgbe 0000:01:00.1: 90:e2:ba:86:30:29 Apr 10 00:57:21 kernel: [ 35.670320] ixgbe 0000:01:00.1 eth3: Enabled Features: RxQ: 8 TxQ: 8 FdirHash Apr 10 00:57:21 kernel: [ 35.677634] ixgbe 0000:01:00.1 eth3: Intel(R) 10 Gigabit Network Connection Apr 10 00:57:21 kernel: [ 35.700070] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.7.29 Apr 10 00:57:21 kernel: [ 35.708537] i40e: Copyright(c) 2013 - 2018 Intel Corporation. Apr 10 00:57:21 kernel: [ 35.738090] RPC: Registered named UNIX socket transport module. Apr 10 00:57:21 kernel: [ 35.744025] RPC: Registered udp transport module. Apr 10 00:57:21 kernel: [ 35.748735] RPC: Registered tcp transport module. Apr 10 00:57:21 kernel: [ 35.753445] RPC: Registered tcp NFSv4.1 backchannel transport module. Apr 10 00:57:21 kernel: [ 35.808082] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 36.844871] Module [adt7475] is removed. Apr 10 00:57:21 kernel: [ 36.856290] Module [i2c_i801] is removed. Apr 10 00:57:21 kernel: [ 37.881943] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 38.907934] Module [adt7475] is removed. Apr 10 00:57:21 kernel: [ 38.919187] Module [i2c_i801] is removed. Apr 10 00:57:21 kernel: [ 39.945316] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 40.971347] Module [adt7475] is removed. Apr 10 00:57:21 kernel: [ 40.982642] Module [i2c_i801] is removed. Apr 10 00:57:21 kernel: [ 42.008148] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 42.034477] bromolow_synobios: module license 'Synology Inc.' taints kernel. Apr 10 00:57:21 kernel: [ 42.041538] Disabling lock debugging due to kernel taint Apr 10 00:57:21 kernel: [ 42.050937] synobios open /dev/ttyS1 success Apr 10 00:57:21 kernel: [ 42.055281] 2022-4-10 0:57:16 UTC Apr 10 00:57:21 kernel: [ 42.058611] synobios: load, major number 201 Apr 10 00:57:21 kernel: [ 42.062893] Brand: Synology Apr 10 00:57:21 kernel: [ 42.065696] Model: DS-3615xs Apr 10 00:57:21 kernel: [ 42.068584] set group disks wakeup number to 4, spinup time deno 7 Apr 10 00:57:21 kernel: [ 42.074768] synobios cpu_arch proc entry initialized Apr 10 00:57:21 kernel: [ 42.079736] synobios crypto_hw proc entry initialized Apr 10 00:57:21 kernel: [ 42.084796] synobios syno_platform proc entry initialized Apr 10 00:57:21 kernel: [ 42.101702] Module [bromolow_synobios] is removed. Apr 10 00:57:21 kernel: [ 42.106639] synobios: unload Apr 10 00:57:21 kernel: [ 42.150703] synobios open /dev/ttyS1 success Apr 10 00:57:21 kernel: [ 42.155052] 2022-4-10 0:57:16 UTC Apr 10 00:57:21 kernel: [ 42.158377] synobios: load, major number 201 Apr 10 00:57:21 kernel: [ 42.162660] Brand: Synology Apr 10 00:57:21 kernel: [ 42.165469] Model: DS-3615xs Apr 10 00:57:21 kernel: [ 42.168354] set group disks wakeup number to 4, spinup time deno 7 Apr 10 00:57:21 kernel: [ 42.174541] synobios cpu_arch proc entry initialized Apr 10 00:57:21 kernel: [ 42.179509] synobios crypto_hw proc entry initialized Apr 10 00:57:21 kernel: [ 42.184569] synobios syno_platform proc entry initialized Apr 10 00:57:21 kernel: [ 45.163154] ixgbe 0000:01:00.0: registered PHC device on eth2 Apr 10 00:57:21 kernel: [ 45.331373] ixgbe 0000:01:00.0 eth2: detected SFP+: 5 Apr 10 00:57:21 kernel: [ 45.579629] ixgbe 0000:01:00.0 eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX Apr 10 00:57:21 kernel: [ 45.966809] igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Apr 10 00:57:21 kernel: [ 46.409486] ixgbe 0000:01:00.1: registered PHC device on eth3 Apr 10 00:57:21 kernel: [ 46.578302] ixgbe 0000:01:00.1 eth3: detected SFP+: 4 Apr 10 00:57:21 kernel: [ 48.121470] igb 0000:08:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Apr 10 00:57:22 udhcpc: networking/udhcp/synoether.c (172) MAC address of interface eth1 is [00:11:32:ae:51:fb] Apr 10 00:57:22 udhcpc: networking/udhcp/synoether.c (280) Broadcasting ARPOP_REQUEST for 169.254.17.182 Apr 10 00:57:25 udhcpc: networking/udhcp/synoether.c (172) MAC address of interface eth3 is [00:11:32:c8:87:aa] Apr 10 00:57:25 udhcpc: networking/udhcp/synoether.c (280) Broadcasting ARPOP_REQUEST for 169.254.180.206 Apr 10 00:57:27 findhostd: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 00:57:27 findhostd: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 00:57:27 findhostd: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 00:57:27 findhostd: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 00:57:27 findhostd: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 00:57:27 avahi-daemon[8486]: /etc/avahi/services/http.service: parse failure: service group incomplete. Apr 10 00:57:27 avahi-daemon[8486]: Failed to load service group file /etc/avahi/services/http.service, ignoring. Apr 10 00:57:28 kernel: [ 54.222825] usbcore: registered new interface driver usbhid Apr 10 00:57:28 kernel: [ 54.228413] usbhid: USB HID core driver Apr 10 00:57:28 synohwctrl: invalid microp command 16388 Apr 10 00:57:30 synoagentregisterd: synoagentregisterd.c:129 Generating register key... Apr 10 00:57:30 synoagentregisterd: synoagentregisterd.c:143 Generated register key [B3A0BE66.E358.4DFC.987E.0480F1542006]. Apr 10 00:57:33 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:03 login[8674]: root login on 'pts/0' Apr 10 00:58:06 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 00:58:12 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 00:58:12 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Apr 10 00:58:12 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Apr 10 00:58:12 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Apr 10 00:58:12 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Apr 10 00:58:12 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Apr 10 00:58:12 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Apr 10 00:58:17 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 00:58:23 synoupgrade: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 00:58:23 synoupgrade: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 00:58:23 synoupgrade: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 00:58:23 synoupgrade: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 00:58:23 synoupgrade: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 01:02:18 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 01:02:24 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 01:02:24 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Apr 10 01:02:24 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Apr 10 01:02:24 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Apr 10 01:02:24 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Apr 10 01:02:24 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Apr 10 01:02:24 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Apr 10 01:02:29 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 01:02:35 install.cgi: install.c:520 Unknown param localinstallreq=false Apr 10 01:02:35 install.cgi: install.c:520 Unknown param _dc=1649552556040 Apr 10 01:02:35 install.cgi: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 01:02:35 install.cgi: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 01:02:35 install.cgi: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 01:02:35 install.cgi: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 01:02:35 install.cgi: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 01:02:35 install.cgi: synoupgrade.c:762 system status = 3 Apr 10 01:02:35 install.cgi: ninstaller.c:1648 CreateDataVol=[0] Apr 10 01:02:35 install.cgi: ninstaller.c:152 umount partition /tmpData Apr 10 01:02:35 install.cgi: ninstaller.c:156 Fail to execute [/bin/umount -f /tmpData > /dev/null 2>&1] Apr 10 01:02:35 install.cgi: ninstaller.c:1660 installer cmd=[/usr/syno/sbin/installer.sh -r >> /tmp/installer_sh.log 2>&1] Apr 10 01:02:35 burnin: B1 not started Apr 10 01:02:35 kernel: [ 362.144004] md1: detected capacity change from 2147418112 to 0 Apr 10 01:02:35 kernel: [ 362.149850] md: md1: set sda2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.154394] md: md1: set sde2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.158934] md: md1: set sdd2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.163471] md: md1: set sdc2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.168009] md: md1: set sdb2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.172544] md: md1 stopped. Apr 10 01:02:35 kernel: [ 362.175434] md: unbind<sda2> Apr 10 01:02:35 kernel: [ 362.185615] md: export_rdev(sda2) Apr 10 01:02:35 kernel: [ 362.189040] md: unbind<sde2> Apr 10 01:02:35 kernel: [ 362.202617] md: export_rdev(sde2) Apr 10 01:02:35 kernel: [ 362.206043] md: unbind<sdd2> Apr 10 01:02:35 kernel: [ 362.218629] md: export_rdev(sdd2) Apr 10 01:02:35 kernel: [ 362.222054] md: unbind<sdc2> Apr 10 01:02:35 kernel: [ 362.234641] md: export_rdev(sdc2) Apr 10 01:02:35 kernel: [ 362.238068] md: unbind<sdb2> Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm -S /dev/md1" Error="mdadm: stopped /dev/md1 " Apr 10 01:02:35 raidtool: raid_internal_lib.c:158 [Info] clean RAID superblock of /dev/md1 Apr 10 01:02:35 kernel: [ 362.250652] md: export_rdev(sdb2) Apr 10 01:02:35 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not name, not match any port type Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: name Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot1 Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot2 Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot3 Apr 10 01:02:35 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:35 raidtool: partition_layout_get_max.c:117 Choose biggest partition layout version 8. Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdc" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sda" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdc" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sde" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdc" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdd" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sde" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdd" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdb" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sde" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdd" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdb" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdb" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sda" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdc" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sde" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdd" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdb" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sda" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sde" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdc" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdd" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdb" Error="" Apr 10 01:02:39 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:39 kernel: [ 365.770148] md: bind<sda1> Apr 10 01:02:39 kernel: [ 365.773115] md: bind<sdb1> Apr 10 01:02:39 kernel: [ 365.776058] md: bind<sdc1> Apr 10 01:02:39 kernel: [ 365.778988] md: bind<sdd1> Apr 10 01:02:39 kernel: [ 365.781933] md: bind<sde1> Apr 10 01:02:39 kernel: [ 365.784999] md/raid1:md0: active with 5 out of 16 mirrors Apr 10 01:02:39 kernel: [ 365.801559] md0: detected capacity change from 0 to 2549940224 Apr 10 01:02:39 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:42 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:42 kernel: [ 368.884348] md: bind<sda2> Apr 10 01:02:42 kernel: [ 368.887302] md: bind<sdb2> Apr 10 01:02:42 kernel: [ 368.890252] md: bind<sdc2> Apr 10 01:02:42 kernel: [ 368.893189] md: bind<sdd2> Apr 10 01:02:42 kernel: [ 368.896126] md: bind<sde2> Apr 10 01:02:42 kernel: [ 368.899206] md/raid1:md1: active with 5 out of 16 mirrors Apr 10 01:02:42 kernel: [ 368.915627] md1: detected capacity change from 0 to 2147418112 Apr 10 01:02:42 raidtool: raidtool.c:716 system inited on [/dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 ], [/dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2 /dev/sde2 ] Apr 10 01:02:42 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:42 kernel: [ 368.953956] md1: unknown partition table Apr 10 01:02:42 kernel: [ 368.977717] md0: unknown partition table Apr 10 01:02:42 kernel: [ 369.455617] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:42 kernel: [ 369.464489] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:42 kernel: [ 369.492616] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 01:02:42 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot Apr 10 01:02:43 kernel: [ 369.543935] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.552988] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.570708] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 01:02:43 install.cgi: ninstaller.c:152 umount partition /tmpRoot Apr 10 01:02:43 install.cgi: ninstaller.c:1688 retv=[0] Apr 10 01:02:43 install.cgi: ninstaller.c:1689(ErrFHOSTDoFdiskFormat) retv=[0] Apr 10 01:02:43 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpData Apr 10 01:02:43 kernel: [ 369.589211] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.598212] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.615720] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 01:02:51 install.cgi: synoupgrade.c:1342 Extracting VERSION from Old Patch Format [/tmpData/@autoupdate/upload.pat][/tmpData/@autoupdate] Apr 10 01:02:51 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:02:51 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:02:51 install.cgi: ninstaller.c:1299 Extracting Old Patch Format [/tmpData/upd@te.pat][/tmpData/upd@te] Apr 10 01:02:51 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:02:51 install.cgi: Verify codesign of [/tmpData/upd@te]... Apr 10 01:02:52 synocodesign: BLAKE2b-256 (VERSION) = 3c16247f07120d616ea47916de830318aa8ca98a089748a39e6e5857e05cb23b Apr 10 01:02:52 synocodesign: VERSION: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (zImage) = 9d323d96f4531669462314d7a3eebd02e4139a9042d4314755aedc9c386ec41e Apr 10 01:02:52 synocodesign: zImage: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (updater) = c3d757c3cfb57ff118a9fadd4dd10ca4f3bb1096d0e5cea04eea8f0d32d31ce0 Apr 10 01:02:52 synocodesign: updater: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (GRUB_VER) = 87bbe35ab61ed3d55963efaf61ce0321aacf55444e01618ecdad6bdf06515d88 Apr 10 01:02:52 synocodesign: GRUB_VER: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (rd.gz) = ec36bee9faf69d86e7855c26be41d63a9c7c7c1833d1f603f5a40abf96555796 Apr 10 01:02:52 synocodesign: rd.gz: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (grub_cksum.syno) = ff33f46dd235dc123d8e5a2c834f489bf749805f7f9a2c9be1b4b4724c36fdc1 Apr 10 01:02:52 synocodesign: grub_cksum.syno: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (H2OFFT-Lx64) = 2db64c1694c2e0e86f9650e53e94c751b6a7e9ac55ee7b516c353858455c726a Apr 10 01:02:52 synocodesign: H2OFFT-Lx64: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (bios.ROM) = a61a3746c63b47f7808a720556cbe6bed147132b2d61364a82e15bf9296515c1 Apr 10 01:02:52 synocodesign: bios.ROM: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (isfl_drv_x64.ko) = c6f16e97188fa8e2ccf78d45dbeff8a3e35a4f41947ada40b6e0d30e824027bc Apr 10 01:02:52 synocodesign: isfl_drv_x64.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (isfl_drv_x64_3_2_40.ko) = 7b7dc2b8324b2892df2a216a776a9a1be5ec08b376a4a1ffda5deae2101362de Apr 10 01:02:52 synocodesign: isfl_drv_x64_3_2_40.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (lfdd_drv.ko) = 9329d617237286d4c043efd6a5a1a46ae6a2bc7c738c7c3d8edd72bdc6bdee79 Apr 10 01:02:52 synocodesign: lfdd_drv.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (lfdd_drv_3_2_40.ko) = 20e4bb7f9554ef3081a01996f5864f1beba8b516eb4146a4632627060294660a Apr 10 01:02:52 synocodesign: lfdd_drv_3_2_40.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (platform.ini) = 8421b0d12fba8a9db28923a5cde1be6025878ec08b658a113d08f24bab315b14 Apr 10 01:02:52 synocodesign: platform.ini: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (SynoBootLoader.efi) = 38850dbcc41adeb942228d1999507bdc47d6d49654e5a02e09bef6399425cb01 Apr 10 01:02:52 synocodesign: SynoBootLoader.efi: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (hda1.tgz) = 8da6cdf384a31e35213b6a48118e5927a4ae86079f577864469855a198d28054 Apr 10 01:02:55 synocodesign: hda1.tgz: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (indexdb.txz) = 74d10b4076736958d4b14b6afb7a248aa2c880778602f030426c2f642c4b81d9 Apr 10 01:02:55 synocodesign: indexdb.txz: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (synohdpack_img.txz) = 8d03e5297bcb1587085e6a6bdf3e1508b990423ee77b9454a8806b68c05f4c58 Apr 10 01:02:55 synocodesign: synohdpack_img.txz: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/dsm6-ui-compatible-1.0.0-0090.spk) = 21f0ebcd955a0b7ddef976668c8bbcddc680e4cd0a08c051cc8eef81eb618520 Apr 10 01:02:55 synocodesign: packages/dsm6-ui-compatible-1.0.0-0090.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/USBCopy-x86_64-2.2.0-1076.spk) = 43d5accb1e160e73c261e2ee7e929816466141c00701c2217153c422194594d6 Apr 10 01:02:55 synocodesign: packages/USBCopy-x86_64-2.2.0-1076.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk) = d6a26cb39703f18248532a77598bfafa0c5c6a1af8f1bd21c3544a17bd65a366 Apr 10 01:02:55 synocodesign: packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/SecureSignIn-x86_64-1.0.3-0138.spk) = 1cbc1d2c29bd41c177462713beed98a194c903100c19acb611d34f26fdbb63e3 Apr 10 01:02:55 synocodesign: packages/SecureSignIn-x86_64-1.0.3-0138.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/ScsiTarget-x86_64-1.0.2-0207.spk) = cfcc18e7080d14ac49b0cc1d3b400765a3b52cdcb2852abb649b1cb25f10410d Apr 10 01:02:55 synocodesign: packages/ScsiTarget-x86_64-1.0.2-0207.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/SMBService-x86_64-4.10.18-0316.spk) = 415d75a8b0317a6dee0142aaedc084efe4da80bd39f71520adf671972da1ea56 Apr 10 01:02:55 synocodesign: packages/SMBService-x86_64-4.10.18-0316.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/Python2-x86_64-2.7.18-1004.spk) = a081dba0d92d460b9828b50e3848bb09834d0cf46b6ece19721965c3b013b819 Apr 10 01:02:55 synocodesign: packages/Python2-x86_64-2.7.18-1004.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/OAuthService-x86_64-1.1.2-0071.spk) = d2c1a75b441827a159dd1662ef4deaf980f08850c16803bc2b0c997a3e82b167 Apr 10 01:02:55 synocodesign: packages/OAuthService-x86_64-1.1.2-0071.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/HybridShare-bromolow-1.2.0-0650.spk) = 1383ed0a35afdbbc7fb452e0eb5559a8fb56009cd3e7306a75a5c4031adff654 Apr 10 01:02:56 synocodesign: packages/HybridShare-bromolow-1.2.0-0650.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/HighAvailability-x86_64-2.1.1-1279.spk) = 923bd2d1896fa6b5b0707a5363589c41c3f5574f83e1fb82aa5aae406030f2c7 Apr 10 01:02:56 synocodesign: packages/HighAvailability-x86_64-2.1.1-1279.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/FileStation-x86_64-1.3.1-1382.spk) = ae14221440cbbb1eccd348e7adf00c2daf85a18e5759390a32a634700fb1faf7 Apr 10 01:02:56 synocodesign: packages/FileStation-x86_64-1.3.1-1382.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/DhcpServer-x86_64-1.0.0-0034.spk) = 19369e16d3653d2adfd3054ecdf195e2f70a7081a7ae67469cb7e5f14e2e93f8 Apr 10 01:02:56 synocodesign: packages/DhcpServer-x86_64-1.0.0-0034.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/ActiveInsight-x86_64-1.1.0-1121.spk) = e3cd03d10840bec796f1d73757c68c81f09710ba94a7fd6745ed3132cb30a3b6 Apr 10 01:02:56 synocodesign: packages/ActiveInsight-x86_64-1.1.0-1121.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/chs/strings) = daaeffe8730f3b64dc5ff3012022d00ff9eccae6498fcc29b50b567db8214755 Apr 10 01:02:56 synocodesign: texts/chs/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/cht/strings) = 8bf545442dffdb3653fbbfc6c1a760cec6895e3c09ba1922c60d776de5f7f965 Apr 10 01:02:56 synocodesign: texts/cht/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/csy/strings) = 414b7446d4271621bb6a62ef756bc29be82881adc1bd8d3ba857e55271fc5d64 Apr 10 01:02:56 synocodesign: texts/csy/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/dan/strings) = 7875012a44709e6e96df56c634adce2b79fc399f655475f91acaeab00f03a39f Apr 10 01:02:56 synocodesign: texts/dan/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/enu/strings) = 0bb2656537d29ca293dfb89a9b646802e4ab2df7897b7eac69984cf048b52e9c Apr 10 01:02:56 synocodesign: texts/enu/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/fre/strings) = 4225e913f64e806446c4311ae204814bd381bdd743a95dd1619e8bf6705a6024 Apr 10 01:02:56 synocodesign: texts/fre/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ger/strings) = 466d3092e6bca364bb9fb12c2b1f85e3c2fd66a9b5d2095ca21e247b97ea9388 Apr 10 01:02:56 synocodesign: texts/ger/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/hun/strings) = 49bdaf196a4a3ef23c6db88a7082770caa5be970c5f4f8b09a5f3f2facf41dbf Apr 10 01:02:56 synocodesign: texts/hun/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ita/strings) = 31260083120ac283cdffbcb5125276f986c653aedfb7b86ed695f0d805bfaf60 Apr 10 01:02:56 synocodesign: texts/ita/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/jpn/strings) = ed7e700421fbcbb235123cb9677878d1cf4e4a8aeb95d5c4672bd02a07f06050 Apr 10 01:02:56 synocodesign: texts/jpn/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/krn/strings) = 9fb3a65a09ba27ed467dc1f69c6018052b8cdb2a78f8777e5d78ea5520c512e2 Apr 10 01:02:56 synocodesign: texts/krn/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/nld/strings) = 0f85cdc97b7ceecee606e717c81e6aa8c95757390ba206c5f2016e448ecfcfb5 Apr 10 01:02:56 synocodesign: texts/nld/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/nor/strings) = 3bca34926da5beb7471c4eb7f0fa8548019f422e6d32bdf79586eae29cb8a9f3 Apr 10 01:02:56 synocodesign: texts/nor/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/plk/strings) = 16f1ad6aec35b00add15764bd61b89ce48385793361c967f1d61912b169b0e9d Apr 10 01:02:56 synocodesign: texts/plk/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ptb/strings) = 43d8df16073f55a31a35f48f0eb58bd0a1b5c933d3518404691769a430d3ef54 Apr 10 01:02:56 synocodesign: texts/ptb/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ptg/strings) = 70959b1947a9084653b0f2c02a259ae384bed0f943f915fad36820e91b71a9f4 Apr 10 01:02:56 synocodesign: texts/ptg/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/rus/strings) = a7284a09f64c3b30e37b4277ed3f6ed353aa2f5b1b889ac35a26139a7e2b4696 Apr 10 01:02:56 synocodesign: texts/rus/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/spn/strings) = 4d23573dd30d3cd1237ebcbb5a245ec92fe64cd12df7e03ba7361acf9d70f687 Apr 10 01:02:56 synocodesign: texts/spn/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/sve/strings) = 962f68c534ccb1c2fb16203ead371c40086ed87d067266486b1397699d3f640f Apr 10 01:02:56 synocodesign: texts/sve/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/tha/strings) = f6fe4677f6d67d40127a0f99984a040721ed0b6d5245e0426c809d3b78233c7d Apr 10 01:02:56 synocodesign: texts/tha/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/trk/strings) = 1f45e3781d7357e229f76e8f6bb3a96b86c49bd6c3880c089bd74f4e6c9fe942 Apr 10 01:02:56 synocodesign: texts/trk/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (expired_models) = efbb8e376238e2ed1a5e064c89aae01f6eafcb75e9060a36d7a84b154da7fabd Apr 10 01:02:56 synocodesign: expired_models: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (DiskCompatibilityDB.tar) = 180fd42ec737ef730fc046810bc7b6714c27b4407bb5197d9756d6eaba0096c4 Apr 10 01:02:56 synocodesign: DiskCompatibilityDB.tar: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/infoset) = b1fc7004374f8532e0ee6b32e2ac17e53f64d45f09d9cccee2514c3440a44e9f Apr 10 01:02:56 synocodesign: ha_dummy_ocf/infoset: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_rear) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Apr 10 01:02:56 synocodesign: ha_dummy_ocf/dsm_rear: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_first) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Apr 10 01:02:56 synocodesign: ha_dummy_ocf/dsm_first: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/PromoteBegin) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Apr 10 01:02:56 synocodesign: ha_dummy_ocf/PromoteBegin: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (synohamessaged-update) = 52ac972856675e13ec8b1c4891deb04037b7774534b75b93a0da4561834c3f8a Apr 10 01:02:56 synocodesign: synohamessaged-update: OK Apr 10 01:02:56 install.cgi: RemoveUpgradeFile: Remove /tmpData/upd@te.pat... Apr 10 01:02:56 install.cgi: Verify checksum of [/tmpData/upd@te]... Apr 10 01:02:58 install.cgi: Pass checksum of /tmpData/upd@te... Apr 10 01:02:58 updater: updater.c:6767 Start of the updater... Apr 10 01:02:58 updater: updater.c:3227 orgBuildNumber = 42218, newBuildNumber=42218 Apr 10 01:02:58 updater: util/updater_util.cpp:86 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf Apr 10 01:02:58 updater: updater.c:7045 ==== Start flash update ==== Apr 10 01:02:58 updater: updater.c:7049 This is X86 platform Apr 10 01:02:58 kernel: [ 384.816372] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.824113] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.850398] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.858134] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.884305] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.892037] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:02:58 updater: updater.c:7065 The SynoBoot partitions exist. Apr 10 01:02:58 updater: updater.c:4072 SYNORedBootUpdCheckAndApply(4072): Skip bootloader update, no uboot_do_upd.sh exists Apr 10 01:02:58 kernel: [ 384.918329] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 updater: updater.c:616 checksum generated by [/bin/grep -i zImage checksum.syno >> /tmp/checksum.syno.tmp] Apr 10 01:02:58 updater: updater.c:645 file [zImage] is being copied to [/tmp/bootmnt] Apr 10 01:02:58 updater: updater.c:653 file [/tmp/bootmnt/zImage] process done. Apr 10 01:02:58 updater: updater.c:616 checksum generated by [/bin/grep -i rd.gz checksum.syno >> /tmp/checksum.syno.tmp] Apr 10 01:02:58 updater: updater.c:645 file [rd.gz] is being copied to [/tmp/bootmnt] Apr 10 01:02:58 updater: updater.c:653 file [/tmp/bootmnt/rd.gz] process done. Apr 10 01:02:58 updater: updater.c:616 checksum generated by [/bin/grep -i grub_cksum.syno checksum.syno >> /tmp/checksum.syno.tmp] Apr 10 01:02:58 updater: updater.c:645 file [grub_cksum.syno] is being copied to [/tmp/bootmnt] Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/grub_cksum.syno] process done. Apr 10 01:02:59 updater: updater.c:636 file [/tmp/bootmnt/hda1.tgz] is being removed Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/hda1.tgz] process done. Apr 10 01:02:59 updater: updater.c:636 file [/tmp/bootmnt/updater] is being removed Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/updater] process done. Apr 10 01:02:59 updater: updater.c:636 file [/tmp/bootmnt/VERSION] is being removed Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/VERSION] process done. Apr 10 01:02:59 updater: updater.c:663 checksum file updated by [/bin/cp -f /tmp/checksum.syno.tmp /tmp/bootmnt/checksum.syno] Apr 10 01:03:00 kernel: [ 387.471885] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:05 kernel: [ 392.503138] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.935387] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.961865] FAT-fs (synoboot1): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.970995] FAT-fs (synoboot1): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.998769] FAT-fs (synoboot1): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 393.006506] FAT-fs (synoboot1): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 393.029988] lfdd: Linux Firmware Debug Driver Version 0.1.0 Apr 10 01:03:06 kernel: [ 393.037902] Module [isfl_drv] is removed. Apr 10 01:03:06 kernel: [ 393.043324] Module [lfdd_drv] is removed. Apr 10 01:03:06 kernel: [ 393.047671] lfdd lfdd_exit: driver unloaded. Apr 10 01:03:06 updater: updater.c:7432 ==== Finish flash update ==== Apr 10 01:03:06 updater: updater.c:7448 ==== Start updater backup flash image ==== Apr 10 01:03:06 updater: updater.c:5511 successfully backup image for System Migration in path (/tmpRoot/.syno/patch). Apr 10 01:03:06 updater: updater.c:7456 ==== Finish updater backup flash image ==== Apr 10 01:03:06 updater: updater.c:7465 ==== Start updater move/extract hda1 and packages ==== Apr 10 01:03:06 updater: updater.c:5910 Decompress hda1.tgz to SynoUpgrade.tar Apr 10 01:03:47 updater: updater.c:5774 checksum of /tmpData/SynoUpgrade.tar is written Apr 10 01:03:47 updater: updater.c:5997 file /tmpData/upd@te/sas_fw_upgrade_tool does not exist, skips handling it Apr 10 01:03:47 updater: updater.c:7473 ==== Finish updater move/extract hda1 and packages ==== Apr 10 01:03:47 updater: updater.c:7482 ==== Start updater flag agent unregister ==== Apr 10 01:03:47 updater: updater.c:7488 ==== Finish updater flag agent unregister ==== Apr 10 01:03:47 updater: updater.c:7497 ==== Start updater handling bootup smallupdate ==== Apr 10 01:05:43 updater: update_cpputil_core.cpp:371 synoinstall: Failed to ExecWgetWithRetry[0x2000 file_get_key_value.c:80] Apr 10 01:05:43 updater: update_cpputil_core.cpp:372 synoinstall: , return[1], url[https://update7.synology.com/smallupdate/v2/42218/synology_bromolow_3615xs/update.json] Apr 10 01:05:44 updater: (autonano.cpp:494) HandleBootupSmallUpdate interrupted Apr 10 01:05:44 updater: root cause type is: std::runtime_error Apr 10 01:05:44 updater: with nested exception: Apr 10 01:05:44 updater: - (autonano.cpp:187) Unable to obtain Packed SmallUpdate. Skip Packed SmallUpdate Flash Install. Apr 10 01:05:44 updater: - (autonano.cpp:169) Failed to download patch [42218][/tmpData/.SynoUpgradeBootupSmallUpdate.pat] Apr 10 01:05:44 updater: - (autonano.cpp:139) Failed to LookUpServer Apr 10 01:05:44 updater: - (autonano.cpp:133) Failed to download security json via wget from url: https://update7.synology.com/smallupdate/v2/42218/synology_bromolow_3615xs/update.json Apr 10 01:05:44 updater: updater.c:7507 ==== Finish updater handling bootup smallupdate ==== Apr 10 01:05:44 updater: updater.c:7520 ==== Finish updater post-action ==== Apr 10 01:05:44 updater: updater.c:7568 Congratulations!! The update has been completed!! Do configupdate when next bootup. Apr 10 01:05:44 install.cgi: ninstaller.c:1546 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[0] Apr 10 01:05:44 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:05:44 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat... Apr 10 01:05:44 install.cgi: ninstaller.c:1811(ErrFHOSTDoUpgrade) err=[0] Apr 10 01:05:44 install.cgi: ninstaller.c:1815(ErrFHOSTDoUpgrade) retv=[0] Apr 10 01:05:44 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /mnt Apr 10 01:05:44 install.cgi: ninstaller.c:152 umount partition /mnt Apr 10 01:05:44 install.cgi: ninstaller.c:152 umount partition /tmpData I am not sure what is going on... it looks like the raid10 is not okay.. and it cannot mount /dev/md0... can anybody give me some advice? Thanks! Edited April 10, 2022 by shennn0 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 10, 2022 Share #2178 Posted April 10, 2022 @pocopico If someone who is already using dsm 7.0.1 wants to do an update I guided you to use postupdate action The result seems to be the same even if you change it to the completed TCRP 7.1 loader using TSU. Is it right to guide users to exclude the use of postupdate that only confuses them? Quote Link to comment Share on other sites More sharing options...
gadreel Posted April 10, 2022 Share #2179 Posted April 10, 2022 (edited) Something needs to be done with 7.1... We need a guide with clear instructions how to do it without any issues. All I see in the last pages is users failing and running a bunch of TC commands which might or might not be correct. Edited April 10, 2022 by gadreel 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 10, 2022 Share #2180 Posted April 10, 2022 11 hours ago, Peter Suh said: @pocopico DVA3221 7.1.0-42661 Build Process As you can see in the log, /home/tc/redpill-load/config/DVA3221/7.1.0-42661/config.json The URL inside points to the 42118 revision. It seems that correction is needed. The following commands were used. [DVA3221] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DVA3221 ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build denverton-7.0.1-42218 ./rploader.sh build denverton-7.0.1-42218 (run twice because custom-module -> /mnt/sdb3/auxfiles is missing) ./rploader.sh clean now ./rploader.sh build denverton-7.1.0-42661 ----------------------------------------------------------------------- Configdir : /home/tc/redpill-load/config/DVA3221/7.1.0-42661 Configfile: /home/tc/redpill-load/config/DVA3221/7.1.0-42661/config.json Pat URL : https://global.synology.com/download/DSM/release/7.0.1/42218/DSM_DVA3221_42218.pat Downloading pat file from URL : https://global.synology.com/download/DSM/release/7.0.1/42218/DSM_DVA3221_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: global.synology.com Failed to download PAT file //mnt/sdb3/auxfiles/dva3221_42661.pat from https://global.synology.com/download/DSM/release/7.0.1/42218/DSM_DVA3221_42218.pat tc@box:~$ cd /home/tc/redpill-load/config/DVA3221/7.1.0-42661/config.json -sh: cd: can't cd to /home/tc/redpill-load/config/DVA3221/7.1.0-42661/config.json: Not a directory tc@box:~$ cd /home/tc/redpill-load/config/DVA3221/7.1.0-42661 tc@box:~/redpill-load/config/DVA3221/7.1.0-42661$ ll total 188 -rw-r--r-- 1 tc staff 4646 Apr 9 16:46 config.json -rw-r--r-- 1 tc staff 181171 Apr 9 16:46 zImage-001-dav3221-42661-ramdisk-and-header.bsp tc@box:~/redpill-load/config/DVA3221/7.1.0-42661$ cat config.json { "os": { "id": "dva3221_42661", "pat_url": "https://global.synology.com/download/DSM/release/7.0.1/42218/DSM_DVA3221_42218.pat", "sha256": "de4c39a704f1de227b8ed8cacfe1fb3694553743b3b2f29fc31379d4a2286b2b" }, So, I modified the config.json file myself and replaced it with the correct url, and the build was successfully completed. However, dsm stops and the PC is turned off during the boot process of dva3221. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 10, 2022 Share #2181 Posted April 10, 2022 (edited) 5 minutes ago, gadreel said: Something needs to be done with 7.1... We need a guide with clear instructions how to do it without any issues. All I see in the last pages is users failing and running a bunch of TC commands which might or might not be correct. Did you see this guide? Have you actually seen the performance? Is it denigrated as a bundle command without even performing it? It's all a necessary process. Edited April 10, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 10, 2022 Share #2182 Posted April 10, 2022 (edited) 14 minutes ago, gadreel said: Something needs to be done with 7.1... We need a guide with clear instructions how to do it without any issues. All I see in the last pages is users failing and running a bunch of TC commands which might or might not be correct. Maybe you want @pocopico's his own guide. He entrusted the installation guide to me. Please try the installation guide above and raise the exact problem. Edited April 10, 2022 by Peter Suh 2 Quote Link to comment Share on other sites More sharing options...
titoum Posted April 10, 2022 Share #2183 Posted April 10, 2022 1 hour ago, gadreel said: Something needs to be done with 7.1... We need a guide with clear instructions how to do it without any issues. All I see in the last pages is users failing and running a bunch of TC commands which might or might not be correct. this is still experimental so if it is not your thing then just wait in a corner of the room. Rome was not built in one day and try/error was part of it. 1 Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 10, 2022 Share #2184 Posted April 10, 2022 Is anyone of you facing a shutdown problem. I went through a successful installation, but then my NAS is shutting down itself? I was also unable to install https://github.com/pocopico/redpill-load/tree/master/redpill-acpid from here Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 10, 2022 Share #2185 Posted April 10, 2022 8 minutes ago, Dreadnought said: Is anyone of you facing a shutdown problem. I went through a successful installation, but then my NAS is shutting down itself? I was also unable to install https://github.com/pocopico/redpill-load/tree/master/redpill-acpid from here It is already mentioned above, but I experienced it in DVA3221. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 10, 2022 Share #2186 Posted April 10, 2022 5 hours ago, shennn0 said: I need some help regarding Installation Loop on my xpenology installation. According RenegadeBE's post at https://xpenology.com/forum/topic/52847-dsm-701-42218/?do=findComment&comment=264321. the BAREMETAL - ASRock Rack C2550D4I should work. So i gave it a shot upgrading from DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader. The only difference is that my Xpenology is a ASRock Rack C2750D4I. (C2750D4I specs) These are the steps i did: ./rploader.sh update now ./rploader.sh serialgen DS315xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext bromolow-7.0.1-42218 auto ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json ./rploader.sh build bromolow-7.0.1-42218 With the Intel SATA as well as the two MARVELL SATA controllers enabled i got these SATA MAPS: sataportmap=42210 diskidxmap=0002040E When i disable both MARVELL SATA controllers these are my SATA MAPS: sataportmap=42 diskidxmap=0002 My setup is at one Btrfs RAID10 (4x 10Tb) and one ext4 SHR (1x 4Tb) After reboot i get stuck in infinite installation loop. i started telnet via: http://<your-dsm-ip-address>:5000/webman/start_telnet.cgi. and logged in via root Here is some debug information: tc@box:~$ lsscsi -Hv 00:00.0 Host bridge: Intel Corporation Atom processor C2000 SoC Transaction Router (rev 02) 00:01.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 1 (rev 02) 00:03.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 3 (rev 02) 00:04.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 4 (rev 02) 00:0e.0 Host bridge: Intel Corporation Atom processor C2000 RAS (rev 02) 00:0f.0 IOMMU: Intel Corporation Atom processor C2000 RCEC (rev 02) 00:13.0 System peripheral: Intel Corporation Atom processor C2000 SMBus 2.0 (rev 02) 00:16.0 USB controller: Intel Corporation Atom processor C2000 USB Enhanced Host Controller (rev 02) 00:17.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA2 Controller (rev 02) 00:18.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA3 Controller (rev 02) 00:1f.0 ISA bridge: Intel Corporation Atom processor C2000 PCU (rev 02) 00:1f.3 SMBus: Intel Corporation Atom processor C2000 PCU SMBus (rev 02) 01:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 01:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 02:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 03:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) 05:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 02) 06:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 21) 07:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) 08:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) 09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11) fdisk info: Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdb: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdb1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdc: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdc1 0,0,1 1023,254,63 1 976754645 976754645 3726G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sde: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sde1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdf: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdf1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sda: 2048 GB, 2199023255040 bytes, 4294967295 sectors 33418 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sda1 0,0,1 1023,254,63 1 2441609215 2441609215 9313G ee EFI GPT Note: sector size is 4096 (not 512) Disk /dev/md1: 2047 MB, 2147418112 bytes, 4194176 sectors 65534 cylinders, 2 heads, 4 sectors/track Units: sectors of 1 * 4096 = 4096 bytes Disk /dev/md1 doesn't contain a valid partition table Disk /dev/synoboot: 1951 MB, 2045771776 bytes, 3995648 sectors 1022 cylinders, 63 heads, 62 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/synoboot1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux Partition 1 has different physical/logical start (non-Linux?): phys=(0,32,33) logical=(0,33,3) Partition 1 has different physical/logical end: phys=(6,62,56) logical=(25,43,36) /dev/synoboot2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux Partition 2 has different physical/logical start (non-Linux?): phys=(6,62,57) logical=(25,43,37) Partition 2 has different physical/logical end: phys=(15,205,62) logical=(65,0,62) /dev/synoboot3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux Partition 3 has different physical/logical start (non-Linux?): phys=(15,205,63) logical=(65,1,1) Partition 3 has different physical/logical end: phys=(130,138,8) logical=(536,57,2) and in the telnet the full /var/log/messages: Apr 10 00:57:21 syslogd started: BusyBox v1.30.1 Apr 10 00:57:21 kernel: klogd started: BusyBox v1.30.1 () Apr 10 00:57:21 kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 10 00:57:21 kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 10 00:57:21 kernel: [ 0.000000] Initializing cgroup subsys cpuacct Apr 10 00:57:21 kernel: [ 0.000000] Linux version 3.10.108 (root@build13) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:15:14 CST 2021 Apr 10 00:57:21 kernel: [ 0.000000] Command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=4 pid=0x2096 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac2=001132AE51FB mac3=001132A8EED2 Apr 10 00:57:21 kernel: [ 0.000000] KERNEL supported cpus: Apr 10 00:57:21 kernel: [ 0.000000] Intel GenuineIntel Apr 10 00:57:21 kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e3a2fff] usable Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007e3a3000-0x000000007edcafff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007edcb000-0x000000007eddafff] ACPI data Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007eddb000-0x000000007f4abfff] ACPI NVS Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007f4ac000-0x000000007f643fff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007f644000-0x000000007f7fffff] usable Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved Apr 10 00:57:21 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable Apr 10 00:57:21 kernel: [ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n') Apr 10 00:57:21 kernel: [ 0.000000] bootconsole [uart0] enabled Apr 10 00:57:21 kernel: [ 0.000000] NX (Execute Disable) protection: active Apr 10 00:57:21 kernel: [ 0.000000] SMBIOS 2.8 present. Apr 10 00:57:21 kernel: [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./C2750D4I, BIOS P3.10 01/24/2018 Apr 10 00:57:21 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Apr 10 00:57:21 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable Apr 10 00:57:21 kernel: [ 0.000000] e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000 10 005721 0.000000 10 005721 0.000000 10 005721 0.000000 00000 10 005721 0.000000 10 005721 0.000000 10 005721 0.000000 10 005721 0.000000 10 005721 0.000000 0080000000 10 005721 0.000000 1880000000 10 005721 0.000000 2900000000 10 005721 0.000000 3 10 005721 0.000000 4 10 005721 0.000000 5 10 005721 0.000000 6 10 005721 0.000000 7 10 005721 0.000000 0x7f800 0x400000000 10 005721 0.0000000x000fd2e00x000fd2ef 10 005721 0.000000 9400024576 10 005721 0.000000 0x000000000x000fffff 10 005721 0.000000 0x000000000x000fffff 10 005721 0.0000000x01b2c000 0x01b2cfff 10 005721 0.0000000x01b2d000 0x01b2dfff 10 005721 0.0000000x01b2e000 0x01b2efff 10 005721 0.000000 0x87fe000000x87fffffff 10 005721 0.000000 0x87fe000000x87fffffff 10 005721 0.0000000x01b2f000 0x01b2ffff 10 005721 0.000000 0x87c0000000x87fdfffff 10 005721 0.000000 0x87c0000000x87fdfffff 10 005721 0.000000 0x8000000000x87bffffff 10 005721 0.000000 0x8000000000x87bffffff 10 005721 0.0000000x01b30000 0x01b30fff 10 005721 0.000000 0x001000000x7e3a2fff 10 005721 0.000000 0x001000000x001fffff 10 005721 0.000000 0x002000000x7e1fffff 10 005721 0.000000 0x7e2000000x7e3a2fff 10 005721 0.000000 0x7f6440000x7f7fffff 10 005721 0.000000 0x7f6440000x7f7fffff 10 005721 0.0000000x01b31000 0x01b31fff 10 005721 0.000000 0x1000000000x7ffffffff 10 005721 0.000000 0x1000000000x7ffffffff 10 005721 0.000000 33554432 Apr 10 00:57:21 kernel: [ 0.000000] early log buf free: 1043596(99%) Apr 10 00:57:21 kernel: [ 0.000000] RAMDISK: [mem 0x35979000-0x36cb3fff] Apr 10 00:57:21 kernel: [ 0.000000] ACPI: RSDP 0x00000000000F0540 00024 (v02 ALASKA) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: XSDT 0x000000007EDD5098 000AC (v01 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FACP 0x000000007EDD9258 0010C (v05 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: DSDT 0x000000007EDD51D0 04084 (v02 ALASKA A M I 01072009 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FACS 0x000000007F4A9F80 00040 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FPDT 0x000000007EDD9368 00044 (v01 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: FIDT 0x000000007EDD93B0 0009C (v01 ALASKA A M I 01072009 AMI 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: HPET 0x000000007EDD9450 00038 (v01 ALASKA 00000001 MSFT 01000013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: AAFT 0x000000007EDD9488 0004E (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: SPMI 0x000000007EDD94D8 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: MCFG 0x000000007EDD9518 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: WDAT 0x000000007EDD9558 001AC (v01 ALASKA A M I 01072009 MSFT 00010013) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: UEFI 0x000000007EDD9708 00042 (v01 00000000 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: APIC 0x000000007EDD9750 00098 (v03 INTEL TIANO 00000001 MSFT 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: BDAT 0x000000007EDD97E8 00030 (v01 00000000 00000000) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: SSDT 0x000000007EDD9818 009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: SPCR 0x000000007EDDA210 00050 (v01 A M I APTIO V 01072009 AMI. 00000005) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: HEST 0x000000007EDDA260 000A8 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: BERT 0x000000007EDDA308 00030 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: ERST 0x000000007EDDA338 00230 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: EINJ 0x000000007EDDA568 00150 (v01 INTEL AVOTON B 00000001 INTL 00000001) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Apr 10 00:57:21 kernel: [ 0.000000] [ffffea0000000000-ffffea001dbfffff] PMD -> [ffff88085d600000-ffff8808795fffff] on node 0 Apr 10 00:57:21 kernel: [ 0.000000] Zone ranges: Apr 10 00:57:21 kernel: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] Apr 10 00:57:21 kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] Apr 10 00:57:21 kernel: [ 0.000000] Normal [mem 0x100000000-0x87fffffff] Apr 10 00:57:21 kernel: [ 0.000000] Movable zone start for each node Apr 10 00:57:21 kernel: [ 0.000000] Early memory node ranges Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x00001000-0x00099fff] Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x00100000-0x7e3a2fff] Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x7f644000-0x7f7fffff] Apr 10 00:57:21 kernel: [ 0.000000] node 0: [mem 0x100000000-0x87fffffff] Apr 10 00:57:21 kernel: [ 0.000000] On node 0 totalpages: 8381688 Apr 10 00:57:21 kernel: [ 0.000000] DMA zone: 56 pages used for memmap Apr 10 00:57:21 kernel: [ 0.000000] DMA zone: 21 pages reserved Apr 10 00:57:21 kernel: [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 Apr 10 00:57:21 kernel: [ 0.000000] DMA32 zone: 7019 pages used for memmap Apr 10 00:57:21 kernel: [ 0.000000] DMA32 zone: 513375 pages, LIFO batch:31 Apr 10 00:57:21 kernel: [ 0.000000] Normal zone: 107520 pages used for memmap Apr 10 00:57:21 kernel: [ 0.000000] Normal zone: 7864320 pages, LIFO batch:31 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Apr 10 00:57:21 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Apr 10 00:57:21 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IRQ0 used by override. Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IRQ2 used by override. Apr 10 00:57:21 kernel: [ 0.000000] ACPI: IRQ9 used by override. Apr 10 00:57:21 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Apr 10 00:57:21 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Apr 10 00:57:21 kernel: [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs Apr 10 00:57:21 kernel: [ 0.000000] nr_irqs_gsi: 40 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007e3a3000 - 000000007edcb000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007edcb000 - 000000007eddb000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007eddb000 - 000000007f4ac000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007f4ac000 - 000000007f644000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 000000007f800000 - 00000000e0000000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed01000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed04000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed0c000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed0c000 - 00000000fed10000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1c000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed1d000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1d000 - 00000000fef00000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000ff800000 Apr 10 00:57:21 kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 Apr 10 00:57:21 kernel: [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices Apr 10 00:57:21 kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 Apr 10 00:57:21 kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88087dc00000 s80704 r8192 d21696 u262144 Apr 10 00:57:21 kernel: [ 0.000000] pcpu-alloc: s80704 r8192 d21696 u262144 alloc=1*2097152 Apr 10 00:57:21 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Apr 10 00:57:21 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8267072 Apr 10 00:57:21 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=4 pid=0x2096 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac2=001132AE51FB mac3=00113 Apr 10 00:57:21 kernel: [ 0.000000] Synology Hardware Version: DS3615xs-j Apr 10 00:57:21 kernel: [ 0.000000] Internal netif num: 4 Apr 10 00:57:21 kernel: [ 0.000000] Mac2: 001132AE51FB Apr 10 00:57:21 kernel: [ 0.000000] Mac3: 001132A8EED2 Apr 10 00:57:21 kernel: [ 0.000000] Mac1: 0011321E1D8D Apr 10 00:57:21 kernel: [ 0.000000] Mac4: 001132C887AA Apr 10 00:57:21 kernel: [ 0.000000] Serial Number: 1230LWN026973 Apr 10 00:57:21 kernel: [ 0.000000] Disk Index Map: 0002040E Apr 10 00:57:21 kernel: [ 0.000000] Vender format version: 2 Apr 10 00:57:21 kernel: [ 0.000000] Power on seq num: 0 Apr 10 00:57:21 kernel: [ 0.000000] Sata Port Map: 42210 Apr 10 00:57:21 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Apr 10 00:57:21 kernel: [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Apr 10 00:57:21 kernel: [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Apr 10 00:57:21 kernel: [ 0.000000] Memory: 32887640k/35651584k available (4820k kernel code, 2124832k absent, 639112k reserved, 4065k data, 828k init) Apr 10 00:57:21 kernel: [ 0.000000] Kernel/User page tables isolation: disabled Apr 10 00:57:21 kernel: [ 0.000000] Hierarchical RCU implementation. Apr 10 00:57:21 kernel: [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 Apr 10 00:57:21 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Apr 10 00:57:21 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 Apr 10 00:57:21 kernel: [ 0.000000] Console: colour dummy device 80x25 Apr 10 00:57:21 kernel: [ 0.000000] console [ttyS0] enabled, bootconsole disabled Apr 10 00:57:21 kernel: [ 0.000000] allocated 134217728 bytes of page_cgroup Apr 10 00:57:21 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Apr 10 00:57:21 kernel: [ 0.000000] hpet clockevent registered Apr 10 00:57:21 kernel: [ 0.000000] tsc: Fast TSC calibration using PIT Apr 10 00:57:21 kernel: [ 0.001000] tsc: Detected 2400.097 MHz processor Apr 10 00:57:21 kernel: [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.19 BogoMIPS (lpj=2400097) Apr 10 00:57:21 kernel: [ 0.000563] pid_max: default: 32768 minimum: 301 Apr 10 00:57:21 kernel: [ 0.000860] Security Framework initialized Apr 10 00:57:21 kernel: [ 0.001088] AppArmor: AppArmor initialized Apr 10 00:57:21 kernel: [ 0.001320] Mount-cache hash table entries: 256 Apr 10 00:57:21 kernel: [ 0.001795] Initializing cgroup subsys memory Apr 10 00:57:21 kernel: [ 0.002041] Initializing cgroup subsys devices Apr 10 00:57:21 kernel: [ 0.002277] Initializing cgroup subsys freezer Apr 10 00:57:21 kernel: [ 0.002514] Initializing cgroup subsys blkio Apr 10 00:57:21 kernel: [ 0.002776] CPU: Physical Processor ID: 0 Apr 10 00:57:21 kernel: [ 0.002990] CPU: Processor Core ID: 0 Apr 10 00:57:21 kernel: [ 0.006992] mce: CPU supports 6 MCE banks Apr 10 00:57:21 kernel: [ 0.007214] CPU0: Thermal monitoring enabled (TM1) Apr 10 00:57:21 kernel: [ 0.007472] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Apr 10 00:57:21 kernel: [ 0.007472] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 Apr 10 00:57:21 kernel: [ 0.007472] tlb_flushall_shift: 6 Apr 10 00:57:21 kernel: [ 0.008206] FEATURE SPEC_CTRL Present Apr 10 00:57:21 kernel: [ 0.008402] FEATURE IBPB_SUPPORT Present Apr 10 00:57:21 kernel: [ 0.008613] Spectre V2 : Vulnerable Apr 10 00:57:21 kernel: [ 0.008902] Freeing SMP alternatives: 20k freed Apr 10 00:57:21 kernel: [ 0.009150] ACPI: Core revision 20130328 Apr 10 00:57:21 kernel: [ 0.012395] ACPI: All ACPI Tables successfully acquired Apr 10 00:57:21 kernel: [ 0.013594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Apr 10 00:57:21 kernel: [ 0.023937] smpboot: CPU0: Intel(R) Atom(TM) CPU C2750 @ 2.40GHz (fam: 06, model: 4d, stepping: 08) Apr 10 00:57:21 kernel: [ 0.024451] TSC deadline timer enabled Apr 10 00:57:21 kernel: [ 0.024665] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. Apr 10 00:57:21 kernel: [ 0.025140] ... version: 3 Apr 10 00:57:21 kernel: [ 0.025353] ... bit width: 40 Apr 10 00:57:21 kernel: [ 0.025571] ... generic registers: 2 Apr 10 00:57:21 kernel: [ 0.025788] ... value mask: 000000ffffffffff Apr 10 00:57:21 kernel: [ 0.026068] ... max period: 000000007fffffff Apr 10 00:57:21 kernel: [ 0.026347] ... fixed-purpose events: 3 Apr 10 00:57:21 kernel: [ 0.026560] ... event mask: 0000000700000003 Apr 10 00:57:21 kernel: [ 0.029042] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK Apr 10 00:57:21 kernel: [ 0.148429] Brought up 8 CPUs Apr 10 00:57:21 kernel: [ 0.148594] smpboot: Total of 8 processors activated (38401.55 BogoMIPS) Apr 10 00:57:21 kernel: [ 0.149705] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. Apr 10 00:57:21 kernel: [ 0.150517] devtmpfs: initialized Apr 10 00:57:21 kernel: [ 0.151051] PM: Registering ACPI NVS region [mem 0x7eddb000-0x7f4abfff] (7147520 bytes) Apr 10 00:57:21 kernel: [ 0.153328] NET: Registered protocol family 16 Apr 10 00:57:21 kernel: [ 0.154280] ACPI: bus type PCI registered Apr 10 00:57:21 kernel: [ 0.154686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Apr 10 00:57:21 kernel: [ 0.155171] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Apr 10 00:57:21 kernel: [ 0.155527] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) Apr 10 00:57:21 kernel: [ 0.156134] PCI: Using configuration type 1 for base access Apr 10 00:57:21 kernel: [ 0.162923] bio: create slab <bio-0> at 0 Apr 10 00:57:21 kernel: [ 0.163428] ACPI: Added _OSI(Module Device) Apr 10 00:57:21 kernel: [ 0.163651] ACPI: Added _OSI(Processor Device) Apr 10 00:57:21 kernel: [ 0.163887] ACPI: Added _OSI(3.0 _SCP Extensions) Apr 10 00:57:21 kernel: [ 0.164137] ACPI: Added _OSI(Processor Aggregator Device) Apr 10 00:57:21 kernel: [ 0.165273] ACPI: EC: Look up EC in DSDT Apr 10 00:57:21 kernel: [ 0.215507] ACPI: SSDT 0x000000007E5B0518 00490 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.216205] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.216438] ACPI: SSDT 0x0000000000000000 00490 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.217018] ACPI: SSDT 0x000000007E5AEC98 001FA (v01 PmRef Cpu0Cst 00003001 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.217710] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.217943] ACPI: SSDT 0x0000000000000000 001FA (v01 PmRef Cpu0Cst 00003001 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.227368] ACPI: SSDT 0x000000007E5B0A18 0047A (v01 PmRef ApIst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.228162] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.228396] ACPI: SSDT 0x0000000000000000 0047A (v01 PmRef ApIst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.233222] ACPI: SSDT 0x000000007E5AFD98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.233939] ACPI: Dynamic OEM Table Load: Apr 10 00:57:21 kernel: [ 0.234177] ACPI: SSDT 0x0000000000000000 00119 (v01 PmRef ApCst 00003000 INTL 20061109) Apr 10 00:57:21 kernel: [ 0.240205] ACPI: Interpreter enabled Apr 10 00:57:21 kernel: [ 0.240407] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568) Apr 10 00:57:21 kernel: [ 0.240913] ACPI: (supports S0 S5) Apr 10 00:57:21 kernel: [ 0.241097] ACPI: Using IOAPIC for interrupt routing Apr 10 00:57:21 kernel: [ 0.241486] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Apr 10 00:57:21 kernel: [ 0.242039] ACPI: No dock devices found. Apr 10 00:57:21 kernel: [ 0.250834] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Apr 10 00:57:21 kernel: [ 0.251448] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) Apr 10 00:57:21 kernel: [ 0.252097] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted Apr 10 00:57:21 kernel: [ 0.252662] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge Apr 10 00:57:21 kernel: [ 0.253272] PCI host bridge to bus 0000:00 Apr 10 00:57:21 kernel: [ 0.253500] pci_bus 0000:00: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 0.253790] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] Apr 10 00:57:21 kernel: [ 0.254115] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] Apr 10 00:57:21 kernel: [ 0.254440] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Apr 10 00:57:21 kernel: [ 0.254805] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] Apr 10 00:57:21 kernel: [ 0.255165] pci_bus 0000:00: root bus resource [mem 0x880000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 0.255541] pci 0000:00:00.0: [8086:1f01] type 00 class 0x060000 Apr 10 00:57:21 kernel: [ 0.256014] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.256346] pci 0000:00:01.0: reg 10: [mem 0xdf740000-0xdf75ffff 64bit] Apr 10 00:57:21 kernel: [ 0.256737] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.257130] pci 0000:00:01.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.257509] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.257841] pci 0000:00:03.0: reg 10: [mem 0xdf720000-0xdf73ffff 64bit] Apr 10 00:57:21 kernel: [ 0.258237] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.258622] pci 0000:00:03.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.259001] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.259340] pci 0000:00:04.0: reg 10: [mem 0xdf700000-0xdf71ffff 64bit] Apr 10 00:57:21 kernel: [ 0.259731] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.260115] pci 0000:00:04.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.260504] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000 Apr 10 00:57:21 kernel: [ 0.260973] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600 Apr 10 00:57:21 kernel: [ 0.261343] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.261809] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000 Apr 10 00:57:21 kernel: [ 0.262142] pci 0000:00:13.0: reg 10: [mem 0xdf764000-0xdf7643ff 64bit] Apr 10 00:57:21 kernel: [ 0.262724] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320 Apr 10 00:57:21 kernel: [ 0.263065] pci 0000:00:16.0: reg 10: [mem 0xdf763000-0xdf7633ff] Apr 10 00:57:21 kernel: [ 0.263493] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.263888] pci 0000:00:16.0: System wakeup disabled by ACPI Apr 10 00:57:21 kernel: [ 0.264267] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.264600] pci 0000:00:17.0: reg 10: [io 0xe0d0-0xe0d7] Apr 10 00:57:21 kernel: [ 0.264897] pci 0000:00:17.0: reg 14: [io 0xe0c0-0xe0c3] Apr 10 00:57:21 kernel: [ 0.265189] pci 0000:00:17.0: reg 18: [io 0xe0b0-0xe0b7] Apr 10 00:57:21 kernel: [ 0.265480] pci 0000:00:17.0: reg 1c: [io 0xe0a0-0xe0a3] Apr 10 00:57:21 kernel: [ 0.265771] pci 0000:00:17.0: reg 20: [io 0xe040-0xe05f] Apr 10 00:57:21 kernel: [ 0.266068] pci 0000:00:17.0: reg 24: [mem 0xdf762000-0xdf7627ff] Apr 10 00:57:21 kernel: [ 0.266428] pci 0000:00:17.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.266844] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.267183] pci 0000:00:18.0: reg 10: [io 0xe090-0xe097] Apr 10 00:57:21 kernel: [ 0.267474] pci 0000:00:18.0: reg 14: [io 0xe080-0xe083] Apr 10 00:57:21 kernel: [ 0.267766] pci 0000:00:18.0: reg 18: [io 0xe070-0xe077] Apr 10 00:57:21 kernel: [ 0.268057] pci 0000:00:18.0: reg 1c: [io 0xe060-0xe063] Apr 10 00:57:21 kernel: [ 0.268352] pci 0000:00:18.0: reg 20: [io 0xe020-0xe03f] Apr 10 00:57:21 kernel: [ 0.268644] pci 0000:00:18.0: reg 24: [mem 0xdf761000-0xdf7617ff] Apr 10 00:57:21 kernel: [ 0.269002] pci 0000:00:18.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.269428] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100 Apr 10 00:57:21 kernel: [ 0.269940] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500 Apr 10 00:57:21 kernel: [ 0.270270] pci 0000:00:1f.3: reg 10: [mem 0xdf760000-0xdf76001f] Apr 10 00:57:21 kernel: [ 0.270626] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f] Apr 10 00:57:21 kernel: [ 0.271162] pci 0000:01:00.0: [8086:10fb] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.271495] pci 0000:01:00.0: reg 10: [mem 0xdfe80000-0xdfefffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.271877] pci 0000:01:00.0: reg 18: [io 0xd020-0xd03f] Apr 10 00:57:21 kernel: [ 0.272183] pci 0000:01:00.0: reg 20: [mem 0xdff04000-0xdff07fff 64bit pref] Apr 10 00:57:21 kernel: [ 0.272604] pci 0000:01:00.0: PME# supported from D0 D3hot Apr 10 00:57:21 kernel: [ 0.272938] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.273306] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.273766] pci 0000:01:00.1: [8086:10fb] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.274106] pci 0000:01:00.1: reg 10: [mem 0xdfe00000-0xdfe7ffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.274483] pci 0000:01:00.1: reg 18: [io 0xd000-0xd01f] Apr 10 00:57:21 kernel: [ 0.274788] pci 0000:01:00.1: reg 20: [mem 0xdff00000-0xdff03fff 64bit pref] Apr 10 00:57:21 kernel: [ 0.275214] pci 0000:01:00.1: PME# supported from D0 D3hot Apr 10 00:57:21 kernel: [ 0.275537] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.275905] pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.278281] pci 0000:00:01.0: PCI bridge to [bus 01] Apr 10 00:57:21 kernel: [ 0.278548] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Apr 10 00:57:21 kernel: [ 0.278873] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfffffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.279384] pci 0000:02:00.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.279713] pci 0000:02:00.0: reg 10: [mem 0xdf500000-0xdf51ffff] Apr 10 00:57:21 kernel: [ 0.280105] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.282447] pci 0000:00:03.0: PCI bridge to [bus 02-08] Apr 10 00:57:21 kernel: [ 0.282726] pci 0000:00:03.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.283048] pci 0000:00:03.0: bridge window [mem 0xde000000-0xdf5fffff] Apr 10 00:57:21 kernel: [ 0.283536] pci 0000:03:01.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.283936] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.284365] pci 0000:03:05.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.284771] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.285201] pci 0000:03:07.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.285601] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.286036] pci 0000:03:09.0: [10b5:8608] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.286436] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.286876] pci 0000:02:00.0: PCI bridge to [bus 03-08] Apr 10 00:57:21 kernel: [ 0.287164] pci 0000:02:00.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.287487] pci 0000:02:00.0: bridge window [mem 0xde000000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.287971] pci 0000:04:00.0: [1b4b:9172] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.288309] pci 0000:04:00.0: reg 10: [io 0xb040-0xb047] Apr 10 00:57:21 kernel: [ 0.288605] pci 0000:04:00.0: reg 14: [io 0xb030-0xb033] Apr 10 00:57:21 kernel: [ 0.288899] pci 0000:04:00.0: reg 18: [io 0xb020-0xb027] Apr 10 00:57:21 kernel: [ 0.289194] pci 0000:04:00.0: reg 1c: [io 0xb010-0xb013] Apr 10 00:57:21 kernel: [ 0.289494] pci 0000:04:00.0: reg 20: [io 0xb000-0xb00f] Apr 10 00:57:21 kernel: [ 0.289789] pci 0000:04:00.0: reg 24: [mem 0xdf410000-0xdf4101ff] Apr 10 00:57:21 kernel: [ 0.290120] pci 0000:04:00.0: reg 30: [mem 0xdf400000-0xdf40ffff pref] Apr 10 00:57:21 kernel: [ 0.290520] pci 0000:04:00.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.292508] pci 0000:03:01.0: PCI bridge to [bus 04] Apr 10 00:57:21 kernel: [ 0.292777] pci 0000:03:01.0: bridge window [io 0xb000-0xbfff] Apr 10 00:57:21 kernel: [ 0.293099] pci 0000:03:01.0: bridge window [mem 0xdf400000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.293596] pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400 Apr 10 00:57:21 kernel: [ 0.294044] pci 0000:05:00.0: supports D1 D2 Apr 10 00:57:21 kernel: [ 0.294272] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.294723] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Apr 10 00:57:21 kernel: [ 0.295252] pci 0000:03:05.0: PCI bridge to [bus 05-06] Apr 10 00:57:21 kernel: [ 0.295533] pci 0000:03:05.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.295861] pci 0000:03:05.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.296379] pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000 Apr 10 00:57:21 kernel: [ 0.296726] pci 0000:06:00.0: reg 10: [mem 0xde000000-0xdeffffff] Apr 10 00:57:21 kernel: [ 0.297068] pci 0000:06:00.0: reg 14: [mem 0xdf000000-0xdf01ffff] Apr 10 00:57:21 kernel: [ 0.297405] pci 0000:06:00.0: reg 18: [io 0xa000-0xa07f] Apr 10 00:57:21 kernel: [ 0.297803] pci 0000:06:00.0: supports D1 D2 Apr 10 00:57:21 kernel: [ 0.298031] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.298536] pci 0000:05:00.0: PCI bridge to [bus 06] Apr 10 00:57:21 kernel: [ 0.298808] pci 0000:05:00.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.299132] pci 0000:05:00.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.299648] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.299986] pci 0000:07:00.0: reg 10: [mem 0xdf300000-0xdf37ffff] Apr 10 00:57:21 kernel: [ 0.300335] pci 0000:07:00.0: reg 18: [io 0x9000-0x901f] Apr 10 00:57:21 kernel: [ 0.300640] pci 0000:07:00.0: reg 1c: [mem 0xdf380000-0xdf383fff] Apr 10 00:57:21 kernel: [ 0.301085] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.302647] pci 0000:03:07.0: PCI bridge to [bus 07] Apr 10 00:57:21 kernel: [ 0.302916] pci 0000:03:07.0: bridge window [io 0x9000-0x9fff] Apr 10 00:57:21 kernel: [ 0.303239] pci 0000:03:07.0: bridge window [mem 0xdf300000-0xdf3fffff] Apr 10 00:57:21 kernel: [ 0.303743] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 Apr 10 00:57:21 kernel: [ 0.304081] pci 0000:08:00.0: reg 10: [mem 0xdf200000-0xdf27ffff] Apr 10 00:57:21 kernel: [ 0.304429] pci 0000:08:00.0: reg 18: [io 0x8000-0x801f] Apr 10 00:57:21 kernel: [ 0.304734] pci 0000:08:00.0: reg 1c: [mem 0xdf280000-0xdf283fff] Apr 10 00:57:21 kernel: [ 0.305179] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold Apr 10 00:57:21 kernel: [ 0.306742] pci 0000:03:09.0: PCI bridge to [bus 08] Apr 10 00:57:21 kernel: [ 0.307011] pci 0000:03:09.0: bridge window [io 0x8000-0x8fff] Apr 10 00:57:21 kernel: [ 0.307334] pci 0000:03:09.0: bridge window [mem 0xdf200000-0xdf2fffff] Apr 10 00:57:21 kernel: [ 0.307828] pci 0000:09:00.0: [1b4b:9230] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 0.308157] pci 0000:09:00.0: reg 10: [io 0xc050-0xc057] Apr 10 00:57:21 kernel: [ 0.308449] pci 0000:09:00.0: reg 14: [io 0xc040-0xc043] Apr 10 00:57:21 kernel: [ 0.308747] pci 0000:09:00.0: reg 18: [io 0xc030-0xc037] Apr 10 00:57:21 kernel: [ 0.309040] pci 0000:09:00.0: reg 1c: [io 0xc020-0xc023] Apr 10 00:57:21 kernel: [ 0.309333] pci 0000:09:00.0: reg 20: [io 0xc000-0xc01f] Apr 10 00:57:21 kernel: [ 0.309626] pci 0000:09:00.0: reg 24: [mem 0xdf610000-0xdf6107ff] Apr 10 00:57:21 kernel: [ 0.309959] pci 0000:09:00.0: reg 30: [mem 0xdf600000-0xdf60ffff pref] Apr 10 00:57:21 kernel: [ 0.310346] pci 0000:09:00.0: PME# supported from D3hot Apr 10 00:57:21 kernel: [ 0.311967] pci 0000:00:04.0: PCI bridge to [bus 09] Apr 10 00:57:21 kernel: [ 0.312233] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] Apr 10 00:57:21 kernel: [ 0.312555] pci 0000:00:04.0: bridge window [mem 0xdf600000-0xdf6fffff] Apr 10 00:57:21 kernel: [ 0.312928] pci_bus 0000:00: on NUMA node 0 Apr 10 00:57:21 kernel: [ 0.313282] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12) Apr 10 00:57:21 kernel: [ 0.313766] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12) Apr 10 00:57:21 kernel: [ 0.314255] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 *10 11 12) Apr 10 00:57:21 kernel: [ 0.314737] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 10 *11 12) Apr 10 00:57:21 kernel: [ 0.315226] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *7 10 11 12) Apr 10 00:57:21 kernel: [ 0.315707] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12) Apr 10 00:57:21 kernel: [ 0.316197] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12) Apr 10 00:57:21 kernel: [ 0.316679] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12) Apr 10 00:57:21 kernel: [ 0.317853] ACPI: Enabled 1 GPEs in block 00 to 1F Apr 10 00:57:21 kernel: [ 0.318133] acpi root: \_SB_.PCI0 notify handler is installed Apr 10 00:57:21 kernel: [ 0.318474] Found 1 acpi root devices Apr 10 00:57:21 kernel: [ 0.318963] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none Apr 10 00:57:21 kernel: [ 0.319385] vgaarb: loaded Apr 10 00:57:21 kernel: [ 0.319541] vgaarb: bridge control possible 0000:06:00.0 Apr 10 00:57:21 kernel: [ 0.320056] SCSI subsystem initialized Apr 10 00:57:21 kernel: [ 0.320258] ACPI: bus type ATA registered Apr 10 00:57:21 kernel: [ 0.320653] libata version 3.00 loaded. Apr 10 00:57:21 kernel: [ 0.321040] pps_core: LinuxPPS API ver. 1 registered Apr 10 00:57:21 kernel: [ 0.321302] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> Apr 10 00:57:21 kernel: [ 0.321842] PTP clock support registered Apr 10 00:57:21 kernel: [ 0.322221] PCI: Using ACPI for IRQ routing Apr 10 00:57:21 kernel: [ 0.323371] PCI: pci_cache_line_size set to 64 bytes Apr 10 00:57:21 kernel: [ 0.323710] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] Apr 10 00:57:21 kernel: [ 0.324030] e820: reserve RAM buffer [mem 0x7e3a3000-0x7fffffff] Apr 10 00:57:21 kernel: [ 0.324346] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff] Apr 10 00:57:21 kernel: [ 0.325023] Switching to clocksource hpet Apr 10 00:57:21 kernel: [ 0.333331] AppArmor: AppArmor Filesystem Enabled Apr 10 00:57:21 kernel: [ 0.343428] pnp: PnP ACPI init Apr 10 00:57:21 kernel: [ 0.343606] ACPI: bus type PNP registered Apr 10 00:57:21 kernel: [ 0.343940] pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active) Apr 10 00:57:21 kernel: [ 0.344674] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved Apr 10 00:57:21 kernel: [ 0.345040] system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved Apr 10 00:57:21 kernel: [ 0.345416] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Apr 10 00:57:21 kernel: [ 0.345812] pnp 00:02: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:01:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.346443] pnp 00:02: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:01:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.347065] pnp 00:02: disabling [mem 0x000c0000-0x000dffff disabled] because it overlaps 0000:01:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.347738] pnp 00:02: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.348422] pnp 00:02: disabling [mem 0x000c0000-0x000dffff disabled] because it overlaps 0000:01:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.349083] pnp 00:02: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.349752] pnp 00:02: disabling [mem 0x000c0000-0x000dffff disabled] because it overlaps 0000:01:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.350425] pnp 00:02: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit] Apr 10 00:57:21 kernel: [ 0.351188] system 00:02: [io 0x0680-0x069f] has been reserved Apr 10 00:57:21 kernel: [ 0.351516] system 00:02: [io 0x0400-0x047f] has been reserved Apr 10 00:57:21 kernel: [ 0.351832] system 00:02: [io 0x0500-0x05fe] has been reserved Apr 10 00:57:21 kernel: [ 0.352144] system 00:02: [mem 0xfed00000-0xfedfffff] could not be reserved Apr 10 00:57:21 kernel: [ 0.352524] system 00:02: [mem 0xffa00000-0xffffffff] has been reserved Apr 10 00:57:21 kernel: [ 0.352871] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved Apr 10 00:57:21 kernel: [ 0.353219] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Apr 10 00:57:21 kernel: [ 0.353690] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Apr 10 00:57:21 kernel: [ 0.354185] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Apr 10 00:57:21 kernel: [ 0.354906] ACPI: IRQ 4 override to edge, high Apr 10 00:57:21 kernel: [ 0.355149] pnp 00:05: [dma 0 disabled] Apr 10 00:57:21 kernel: [ 0.355491] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) Apr 10 00:57:21 kernel: [ 0.356171] ACPI: IRQ 3 override to edge, high Apr 10 00:57:21 kernel: [ 0.356428] pnp 00:06: [dma 0 disabled] Apr 10 00:57:21 kernel: [ 0.356760] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) Apr 10 00:57:21 kernel: [ 0.357398] system 00:07: [io 0x0a00-0x0a0f] has been reserved Apr 10 00:57:21 kernel: [ 0.357711] system 00:07: [io 0x0a10-0x0a1f] has been reserved Apr 10 00:57:21 kernel: [ 0.358023] system 00:07: [io 0x0a20-0x0a2f] has been reserved Apr 10 00:57:21 kernel: [ 0.358346] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Apr 10 00:57:21 kernel: [ 0.358916] pnp 00:08: Plug and Play ACPI device, IDs IPI0001 (active) Apr 10 00:57:21 kernel: [ 0.359394] pnp: PnP ACPI: found 9 devices Apr 10 00:57:21 kernel: [ 0.359613] ACPI: bus type PNP unregistered Apr 10 00:57:21 kernel: [ 0.372202] pci 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 400000 Apr 10 00:57:21 kernel: [ 0.372754] pci 0000:00:01.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 Apr 10 00:57:21 kernel: [ 0.373224] pci 0000:00:01.0: BAR 14: assigned [mem 0x80000000-0x803fffff] Apr 10 00:57:21 kernel: [ 0.373605] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.373967] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.374336] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.374698] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.375060] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.375433] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.375794] pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.376156] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.376527] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.376889] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.377242] pci 0000:01:00.0: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.377773] pci 0000:01:00.0: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.378301] pci 0000:01:00.1: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.378837] pci 0000:01:00.1: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 100000 Apr 10 00:57:21 kernel: [ 0.379382] pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.379734] pci 0000:01:00.0: BAR 7: assigned [mem 0x80000000-0x800fffff 64bit] Apr 10 00:57:21 kernel: [ 0.380134] pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.380497] pci 0000:01:00.0: BAR 10: assigned [mem 0x80100000-0x801fffff 64bit] Apr 10 00:57:21 kernel: [ 0.380900] pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.381253] pci 0000:01:00.1: BAR 7: assigned [mem 0x80200000-0x802fffff 64bit] Apr 10 00:57:21 kernel: [ 0.381664] pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit] Apr 10 00:57:21 kernel: [ 0.382017] pci 0000:01:00.1: BAR 10: assigned [mem 0x80300000-0x803fffff 64bit] Apr 10 00:57:21 kernel: [ 0.382419] pci 0000:00:01.0: PCI bridge to [bus 01] Apr 10 00:57:21 kernel: [ 0.382684] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Apr 10 00:57:21 kernel: [ 0.383007] pci 0000:00:01.0: bridge window [mem 0x80000000-0x803fffff] Apr 10 00:57:21 kernel: [ 0.383374] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfffffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.383784] pci 0000:03:01.0: PCI bridge to [bus 04] Apr 10 00:57:21 kernel: [ 0.384049] pci 0000:03:01.0: bridge window [io 0xb000-0xbfff] Apr 10 00:57:21 kernel: [ 0.384389] pci 0000:03:01.0: bridge window [mem 0xdf400000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.384752] pci 0000:05:00.0: PCI bridge to [bus 06] Apr 10 00:57:21 kernel: [ 0.385017] pci 0000:05:00.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.385350] pci 0000:05:00.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.385717] pci 0000:03:05.0: PCI bridge to [bus 05-06] Apr 10 00:57:21 kernel: [ 0.385994] pci 0000:03:05.0: bridge window [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.386317] pci 0000:03:05.0: bridge window [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.386687] pci 0000:03:07.0: PCI bridge to [bus 07] Apr 10 00:57:21 kernel: [ 0.386951] pci 0000:03:07.0: bridge window [io 0x9000-0x9fff] Apr 10 00:57:21 kernel: [ 0.387275] pci 0000:03:07.0: bridge window [mem 0xdf300000-0xdf3fffff] Apr 10 00:57:21 kernel: [ 0.387649] pci 0000:03:09.0: PCI bridge to [bus 08] Apr 10 00:57:21 kernel: [ 0.387914] pci 0000:03:09.0: bridge window [io 0x8000-0x8fff] Apr 10 00:57:21 kernel: [ 0.388237] pci 0000:03:09.0: bridge window [mem 0xdf200000-0xdf2fffff] Apr 10 00:57:21 kernel: [ 0.388610] pci 0000:02:00.0: PCI bridge to [bus 03-08] Apr 10 00:57:21 kernel: [ 0.388888] pci 0000:02:00.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.389211] pci 0000:02:00.0: bridge window [mem 0xde000000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.389581] pci 0000:00:03.0: PCI bridge to [bus 02-08] Apr 10 00:57:21 kernel: [ 0.389858] pci 0000:00:03.0: bridge window [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.390181] pci 0000:00:03.0: bridge window [mem 0xde000000-0xdf5fffff] Apr 10 00:57:21 kernel: [ 0.390558] pci 0000:00:04.0: PCI bridge to [bus 09] Apr 10 00:57:21 kernel: [ 0.390822] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] Apr 10 00:57:21 kernel: [ 0.391145] pci 0000:00:04.0: bridge window [mem 0xdf600000-0xdf6fffff] Apr 10 00:57:21 kernel: [ 0.391932] pci 0000:00:04.0: can't derive routing for PCI INT A Apr 10 00:57:21 kernel: [ 0.392249] pci 0000:00:04.0: PCI INT A: no GSI Apr 10 00:57:21 kernel: [ 0.392505] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Apr 10 00:57:21 kernel: [ 0.392800] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Apr 10 00:57:21 kernel: [ 0.393094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Apr 10 00:57:21 kernel: [ 0.393436] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff] Apr 10 00:57:21 kernel: [ 0.393765] pci_bus 0000:00: resource 8 [mem 0x880000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 0.394103] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] Apr 10 00:57:21 kernel: [ 0.394405] pci_bus 0000:01: resource 1 [mem 0x80000000-0x803fffff] Apr 10 00:57:21 kernel: [ 0.394734] pci_bus 0000:01: resource 2 [mem 0xdfe00000-0xdfffffff 64bit pref] Apr 10 00:57:21 kernel: [ 0.395112] pci_bus 0000:02: resource 0 [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.395413] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf5fffff] Apr 10 00:57:21 kernel: [ 0.395743] pci_bus 0000:03: resource 0 [io 0x8000-0xbfff] Apr 10 00:57:21 kernel: [ 0.396037] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.396381] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] Apr 10 00:57:21 kernel: [ 0.396675] pci_bus 0000:04: resource 1 [mem 0xdf400000-0xdf4fffff] Apr 10 00:57:21 kernel: [ 0.397005] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.397298] pci_bus 0000:05: resource 1 [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.397635] pci_bus 0000:06: resource 0 [io 0xa000-0xafff] Apr 10 00:57:21 kernel: [ 0.397930] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdf0fffff] Apr 10 00:57:21 kernel: [ 0.398259] pci_bus 0000:07: resource 0 [io 0x9000-0x9fff] Apr 10 00:57:21 kernel: [ 0.398560] pci_bus 0000:07: resource 1 [mem 0xdf300000-0xdf3fffff] Apr 10 00:57:21 kernel: [ 0.398890] pci_bus 0000:08: resource 0 [io 0x8000-0x8fff] Apr 10 00:57:21 kernel: [ 0.399184] pci_bus 0000:08: resource 1 [mem 0xdf200000-0xdf2fffff] Apr 10 00:57:21 kernel: [ 0.399525] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] Apr 10 00:57:21 kernel: [ 0.399819] pci_bus 0000:09: resource 1 [mem 0xdf600000-0xdf6fffff] Apr 10 00:57:21 kernel: [ 0.400266] NET: Registered protocol family 2 Apr 10 00:57:21 kernel: [ 0.400860] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Apr 10 00:57:21 kernel: [ 0.402361] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Apr 10 00:57:21 kernel: [ 0.402985] TCP: Hash tables configured (established 262144 bind 65536) Apr 10 00:57:21 kernel: [ 0.403408] TCP: reno registered Apr 10 00:57:21 kernel: [ 0.403591] UDP hash table entries: 16384 (order: 7, 524288 bytes) Apr 10 00:57:21 kernel: [ 0.404103] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) Apr 10 00:57:21 kernel: [ 0.404769] NET: Registered protocol family 1 Apr 10 00:57:21 kernel: [ 0.415502] pci 0000:06:00.0: Boot video device Apr 10 00:57:21 kernel: [ 0.415760] PCI: CLS 64 bytes, default 64 Apr 10 00:57:21 kernel: [ 1.406968] Trying to unpack rootfs image as initramfs... Apr 10 00:57:21 kernel: [ 1.433006] Freeing initrd memory: 19692k freed Apr 10 00:57:21 kernel: [ 1.441511] redpill: module verification failed: signature and/or required key missing - tainting kernel Apr 10 00:57:21 kernel: [ 1.458661] PCI host bridge to bus 0001:07 Apr 10 00:57:21 kernel: [ 1.462773] pci_bus 0001:07: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.468961] pci_bus 0001:07: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.475933] pci_bus 0001:07: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.481439] pci 0001:07:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.487626] pci 0001:07:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.493099] PCI host bridge to bus 0001:08 Apr 10 00:57:21 kernel: [ 1.497215] pci_bus 0001:08: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.503402] pci_bus 0001:08: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.510376] pci_bus 0001:08: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.515878] pci 0001:08:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.522067] pci 0001:08:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.527551] PCI host bridge to bus 0001:09 Apr 10 00:57:21 kernel: [ 1.531662] pci_bus 0001:09: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.537855] pci_bus 0001:09: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.544828] pci_bus 0001:09: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.550331] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.556515] pci 0001:09:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.561990] PCI host bridge to bus 0001:0a Apr 10 00:57:21 kernel: [ 1.566097] pci_bus 0001:0a: root bus resource [io 0x0000-0xffff] Apr 10 00:57:21 kernel: [ 1.572289] pci_bus 0001:0a: root bus resource [mem 0x00000000-0xfffffffff] Apr 10 00:57:21 kernel: [ 1.579263] pci_bus 0001:0a: root bus resource [bus 00-ff] Apr 10 00:57:21 kernel: [ 1.584764] pci 0001:0a:00.0: [1b4b:9235] type 00 class 0x010601 Apr 10 00:57:21 kernel: [ 1.590945] pci 0001:0a:00.0: Can't map mv9235 registers Apr 10 00:57:21 kernel: [ 1.607956] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Apr 10 00:57:21 kernel: [ 1.614428] software IO TLB [mem 0x7a3a3000-0x7e3a3000] (64MB) mapped at [ffff88007a3a3000-ffff88007e3a2fff] Apr 10 00:57:21 kernel: [ 1.638285] Initialise module verification Apr 10 00:57:21 kernel: [ 1.642494] audit: initializing netlink socket (disabled) Apr 10 00:57:21 kernel: [ 1.647940] type=2000 audit(1649552195.580:1): initialized Apr 10 00:57:21 kernel: [ 1.671626] bounce pool size: 64 pages Apr 10 00:57:21 kernel: [ 1.675777] VFS: Disk quotas dquot_6.5.2 Apr 10 00:57:21 kernel: [ 1.679800] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Apr 10 00:57:21 kernel: [ 1.686699] msgmni has been set to 32768 Apr 10 00:57:21 kernel: [ 1.691038] Key type asymmetric registered Apr 10 00:57:21 kernel: [ 1.695162] Asymmetric key parser 'x509' registered Apr 10 00:57:21 kernel: [ 1.700247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) Apr 10 00:57:21 kernel: [ 1.707683] io scheduler noop registered Apr 10 00:57:21 kernel: [ 1.711623] io scheduler deadline registered Apr 10 00:57:21 kernel: [ 1.715947] io scheduler cfq registered (default) Apr 10 00:57:21 kernel: [ 1.720950] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.726615] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.732279] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.737947] pcieport 0000:02:00.0: irq 43 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.743634] pcieport 0000:03:01.0: irq 44 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.749309] pcieport 0000:03:05.0: irq 45 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.754979] pcieport 0000:03:07.0: irq 46 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.760671] pcieport 0000:03:09.0: irq 47 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 1.766561] aer 0000:00:01.0:pcie02: service driver aer loaded Apr 10 00:57:21 kernel: [ 1.772479] aer 0000:00:03.0:pcie02: service driver aer loaded Apr 10 00:57:21 kernel: [ 1.778350] aer 0000:00:04.0:pcie02: service driver aer loaded Apr 10 00:57:21 kernel: [ 2.182992] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Apr 10 00:57:21 kernel: [ 2.210448] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 10 00:57:21 kernel: [ 2.237924] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Apr 10 00:57:21 kernel: [ 2.281433] brd: module loaded Apr 10 00:57:21 kernel: [ 2.289966] Loading iSCSI transport class v2.0-870. Apr 10 00:57:21 kernel: [ 2.304044] rdac: device handler registered Apr 10 00:57:21 kernel: [ 2.309079] ahci 0000:00:17.0: version 3.0 Apr 10 00:57:21 kernel: [ 2.313389] ahci 0000:00:17.0: irq 48 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.328893] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode Apr 10 00:57:21 kernel: [ 2.337007] ahci 0000:00:17.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds apst Apr 10 00:57:21 kernel: [ 2.345465] ahci 0000:00:17.0: setting latency timer to 64 Apr 10 00:57:21 kernel: [ 2.355744] scsi0 : ahci Apr 10 00:57:21 kernel: [ 2.360054] scsi1 : ahci Apr 10 00:57:21 kernel: [ 2.363167] scsi2 : ahci Apr 10 00:57:21 kernel: [ 2.366198] scsi3 : ahci Apr 10 00:57:21 kernel: [ 2.369153] ata1: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762100 irq 48 Apr 10 00:57:21 kernel: [ 2.376569] ata2: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762180 irq 48 Apr 10 00:57:21 kernel: [ 2.383986] ata3: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762200 irq 48 Apr 10 00:57:21 kernel: [ 2.391390] ata4: SATA max UDMA/133 abar m2048@0xdf762000 port 0xdf762280 irq 48 Apr 10 00:57:21 kernel: [ 2.398964] ahci 0000:00:18.0: irq 49 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.403918] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Apr 10 00:57:21 kernel: [ 2.412016] ahci 0000:00:18.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds apst Apr 10 00:57:21 kernel: [ 2.420466] ahci 0000:00:18.0: setting latency timer to 64 Apr 10 00:57:21 kernel: [ 2.427319] scsi4 : ahci Apr 10 00:57:21 kernel: [ 2.430944] scsi5 : ahci Apr 10 00:57:21 kernel: [ 2.433963] ata5: SATA max UDMA/133 abar m2048@0xdf761000 port 0xdf761100 irq 49 Apr 10 00:57:21 kernel: [ 2.441375] ata6: SATA max UDMA/133 abar m2048@0xdf761000 port 0xdf761180 irq 49 Apr 10 00:57:21 kernel: [ 2.448942] ahci 0000:04:00.0: irq 50 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.453907] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Apr 10 00:57:21 kernel: [ 2.462015] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs Apr 10 00:57:21 kernel: [ 2.471426] scsi6 : ahci Apr 10 00:57:21 kernel: [ 2.474947] scsi7 : ahci Apr 10 00:57:21 kernel: [ 2.477994] ata7: SATA max UDMA/133 abar m512@0xdf410000 port 0xdf410100 irq 50 Apr 10 00:57:21 kernel: [ 2.485324] ata8: SATA max UDMA/133 abar m512@0xdf410000 port 0xdf410180 irq 50 Apr 10 00:57:21 kernel: [ 2.492785] ahci 0000:09:00.0: irq 51 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 2.497694] ahci 0000:09:00.0: controller can do FBS, turning on CAP_FBS Apr 10 00:57:21 kernel: [ 2.515012] ahci 0000:09:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode Apr 10 00:57:21 kernel: [ 2.523199] ahci 0000:09:00.0: flags: 64bit ncq fbs pio Apr 10 00:57:21 kernel: [ 2.529280] scsi8 : ahci Apr 10 00:57:21 kernel: [ 2.532239] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610100 irq 51 Apr 10 00:57:21 kernel: [ 2.539678] ahci: probe of 0001:07:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.545450] ahci: probe of 0001:08:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.551218] ahci: probe of 0001:09:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.556987] ahci: probe of 0001:0a:00.0 failed with error -22 Apr 10 00:57:21 kernel: [ 2.563796] rtc_cmos 00:03: RTC can wake from S4 Apr 10 00:57:21 kernel: [ 2.568767] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Apr 10 00:57:21 kernel: [ 2.574910] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs Apr 10 00:57:21 kernel: [ 2.582301] i2c /dev entries driver Apr 10 00:57:21 kernel: [ 2.587425] md: raid1 personality registered for level 1 Apr 10 00:57:21 kernel: [ 2.592786] cpuidle: using governor ladder Apr 10 00:57:21 kernel: [ 2.596896] cpuidle: using governor menu Apr 10 00:57:21 kernel: [ 2.600977] TCP: cubic registered Apr 10 00:57:21 kernel: [ 2.604313] NET: Registered protocol family 17 Apr 10 00:57:21 kernel: [ 2.608784] Key type dns_resolver registered Apr 10 00:57:21 kernel: [ 2.626103] tsc: Refined TSC clocksource calibration: 2399.999 MHz Apr 10 00:57:21 kernel: [ 2.632323] Switching to clocksource tsc Apr 10 00:57:21 kernel: [ 2.704155] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 00:57:21 kernel: [ 2.710368] ata4: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.715798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 00:57:21 kernel: [ 2.722007] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 00:57:21 kernel: [ 2.731358] ata3.00: ATA-9: HGST HUS726T4TALN6L4, VKGNW460, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.738071] ata3.00: 976754646 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.745120] ata3.00: SN:V1G62ZAB Apr 10 00:57:21 kernel: [ 2.748368] ata2.00: ATA-9: HGST HUH721010ALN600, LHGNT384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.753209] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 10 00:57:21 kernel: [ 2.753238] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 10 00:57:21 kernel: [ 2.763741] ata6.00: ATA-9: HGST HUH721010ALN604, LHGNW384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.763743] ata6.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.763744] ata6.00: SN:1SHW2RBZ Apr 10 00:57:21 kernel: [ 2.766744] ata5.00: ATA-9: HGST HUH721010ALN604, LHGNW384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.766746] ata5.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.766747] ata5.00: SN:1SHVBTPZ Apr 10 00:57:21 kernel: [ 2.770191] ata6.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.774170] ata5.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.801250] ata8: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.801303] ata7: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.820973] ata2.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.828109] ata2.00: SN:1EK1PJ3Z Apr 10 00:57:21 kernel: [ 2.834749] ata3.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.841902] ata2.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.846196] ata1.00: ATA-9: HGST HUH721010ALN600, LHGNT384, max UDMA/133 Apr 10 00:57:21 kernel: [ 2.846209] ata9: SATA link down (SStatus 0 SControl 300) Apr 10 00:57:21 kernel: [ 2.858310] ata1.00: 2441609216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA Apr 10 00:57:21 kernel: [ 2.865448] ata1.00: SN:1EK17LNZ Apr 10 00:57:21 kernel: [ 2.876065] ata1.00: configured for UDMA/133 Apr 10 00:57:21 kernel: [ 2.880687] scsi 0:0:0:0: Direct-Access HGST HUH721010ALN600 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.890051] sd 0:0:0:0: [sda] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.898008] sd 0:0:0:0: [sda] Write Protect is off Apr 10 00:57:21 kernel: [ 2.899567] scsi 1:0:0:0: Direct-Access HGST HUH721010ALN600 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.900115] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.900199] sd 1:0:0:0: [sdb] Write Protect is off Apr 10 00:57:21 kernel: [ 2.900202] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 2.900240] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 2.900591] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.901335] scsi 2:0:0:0: Direct-Access HGST HUS726T4TALN6L4 VKGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.904711] sd 2:0:0:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB) Apr 10 00:57:21 kernel: [ 2.904800] sd 2:0:0:0: [sdc] Write Protect is off Apr 10 00:57:21 kernel: [ 2.904803] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 2.904842] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 2.906316] sd 2:0:0:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB) Apr 10 00:57:21 kernel: [ 2.907041] scsi 4:0:0:0: Direct-Access HGST HUH721010ALN604 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 2.908694] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 2.945831] sdb: sdb1 sdb2 sdb3 Apr 10 00:57:21 kernel: [ 2.946664] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 2.946787] sd 1:0:0:0: [sdb] Attached SCSI disk Apr 10 00:57:21 kernel: [ 2.955337] sdc: sdc1 sdc2 sdc3 Apr 10 00:57:21 kernel: [ 2.957003] sd 2:0:0:0: [sdc] 976754646 4096-byte logical blocks: (4.00 TB/3.63 TiB) Apr 10 00:57:21 kernel: [ 2.957128] sd 2:0:0:0: [sdc] Attached SCSI disk Apr 10 00:57:21 kernel: [ 3.033989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 3.039120] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 3.048650] sd 0:0:0:0: [sda] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 3.110145] sda: sda1 sda2 sda3 Apr 10 00:57:21 kernel: [ 3.114292] sd 0:0:0:0: [sda] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 3.122330] sd 0:0:0:0: [sda] Attached SCSI disk Apr 10 00:57:21 kernel: [ 3.909106] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 3.912196] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 4.916916] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 4.919995] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 5.924714] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 5.927791] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 6.932472] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 6.935548] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 7.940247] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 7.943323] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 8.948061] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 8.951146] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 9.955858] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 9.958937] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 10.963617] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 10.966696] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 11.971393] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 11.974472] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 12.979208] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 12.982292] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 13.986958] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 13.990017] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 14.994789] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 14.997871] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 16.002566] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 16.005639] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 17.010354] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 17.013440] want_idx 2 index 3. delay and reget Apr 10 00:57:21 kernel: [ 18.018147] want_idx 2 index 3 Apr 10 00:57:21 kernel: [ 18.021503] sd 4:0:0:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 18.022166] scsi 5:0:0:0: Direct-Access HGST HUH721010ALN604 LHGN PQ: 0 ANSI: 5 Apr 10 00:57:21 kernel: [ 18.022512] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 18.042895] sd 4:0:0:0: [sdd] Write Protect is off Apr 10 00:57:21 kernel: [ 18.047705] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 18.052810] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 18.062238] sd 4:0:0:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 18.117029] sdd: sdd1 sdd2 sdd3 Apr 10 00:57:21 kernel: [ 18.121131] sd 4:0:0:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 18.129133] sd 4:0:0:0: [sdd] Attached SCSI disk Apr 10 00:57:21 kernel: [ 19.022930] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 19.026018] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 20.030711] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 20.033787] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 21.038496] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 21.041562] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 22.046291] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 22.049379] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 23.054052] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 23.057115] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 24.061858] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 24.064935] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 25.069642] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 25.072709] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 26.077435] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 26.080529] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 27.085198] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 27.088261] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 28.093004] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 28.096074] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 29.100756] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 29.103823] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 30.108582] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 30.111670] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 31.116344] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 31.119411] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 32.124150] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 32.127220] want_idx 3 index 4. delay and reget Apr 10 00:57:21 kernel: [ 33.131935] want_idx 3 index 4 Apr 10 00:57:21 kernel: [ 33.135287] sd 5:0:0:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 33.143286] sd 5:0:0:0: [sde] Write Protect is off Apr 10 00:57:21 kernel: [ 33.148122] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 Apr 10 00:57:21 kernel: [ 33.153223] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 00:57:21 kernel: [ 33.162578] sd 5:0:0:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 33.223631] sde: sde1 sde2 sde3 Apr 10 00:57:21 kernel: [ 33.227735] sd 5:0:0:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.09 TiB) Apr 10 00:57:21 kernel: [ 33.235776] sd 5:0:0:0: [sde] Attached SCSI disk Apr 10 00:57:21 kernel: [ 33.240439] Loading module verification blacklist certificates Apr 10 00:57:21 kernel: [ 33.246284] Loading module verification certificates Apr 10 00:57:21 kernel: [ 33.251317] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: ' Apr 10 00:57:21 kernel: [ 33.263330] MODSIGN: Loaded cert 'Synology Root Certification Authority: ' Apr 10 00:57:21 kernel: [ 33.273700] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: ' Apr 10 00:57:21 kernel: [ 33.285553] MODSIGN: Loaded cert 'Synology kernel module signing key: ' Apr 10 00:57:21 kernel: [ 33.295665] registered taskstats version 1 Apr 10 00:57:21 kernel: [ 33.300307] rtc_cmos 00:03: setting system clock to 2022-04-10 00:57:07 UTC (1649552227) Apr 10 00:57:21 kernel: [ 33.309803] Freeing unused kernel memory: 828k freed Apr 10 00:57:21 kernel: [ 33.314974] Write protecting the kernel read-only data: 8192k Apr 10 00:57:21 kernel: [ 33.320911] Freeing unused kernel memory: 1312k freed Apr 10 00:57:21 kernel: [ 33.327836] Freeing unused kernel memory: 480k freed Apr 10 00:57:21 kernel: [ 33.428032] ACPI: bus type USB registered Apr 10 00:57:21 kernel: [ 33.432382] usbcore: registered new interface driver usbfs Apr 10 00:57:21 kernel: [ 33.438011] usbcore: registered new interface driver hub Apr 10 00:57:21 kernel: [ 33.443494] usbcore: registered new interface driver ethub Apr 10 00:57:21 kernel: [ 33.449147] usbcore: registered new device driver usb Apr 10 00:57:21 kernel: [ 33.469709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Apr 10 00:57:21 kernel: [ 33.483084] ehci-pci: EHCI PCI platform driver Apr 10 00:57:21 kernel: [ 33.488136] ehci-pci 0000:00:16.0: setting latency timer to 64 Apr 10 00:57:21 kernel: [ 33.494001] ehci-pci 0000:00:16.0: EHCI Host Controller Apr 10 00:57:21 kernel: [ 33.499238] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 Apr 10 00:57:21 kernel: [ 33.506651] ehci-pci 0000:00:16.0: debug port 2 Apr 10 00:57:21 kernel: [ 33.515092] ehci-pci 0000:00:16.0: cache line size of 64 is not supported Apr 10 00:57:21 kernel: [ 33.521910] ehci-pci 0000:00:16.0: irq 23, io mem 0xdf763000 Apr 10 00:57:21 kernel: [ 33.533220] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 Apr 10 00:57:21 kernel: [ 33.539432] hub 1-0:1.0: USB hub found Apr 10 00:57:21 kernel: [ 33.543206] hub 1-0:1.0: 8 ports detected Apr 10 00:57:21 kernel: [ 33.557582] uhci_hcd: USB Universal Host Controller Interface driver Apr 10 00:57:21 kernel: [ 33.598666] usbcore: registered new interface driver usb-storage Apr 10 00:57:21 kernel: [ 33.620523] dca service started, version 1.12.1 Apr 10 00:57:21 kernel: [ 33.630026] Intel(R) Gigabit Ethernet Linux Driver - version 5.7.2 Apr 10 00:57:21 kernel: [ 33.637488] Copyright(c) 2007 - 2021 Intel Corporation. Apr 10 00:57:21 kernel: [ 33.644615] igb 0000:07:00.0: irq 52 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.649421] igb 0000:07:00.0: irq 53 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.704132] igb 0000:07:00.0: added PHC on eth0 Apr 10 00:57:21 kernel: [ 33.708694] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Linux Driver Apr 10 00:57:21 kernel: [ 33.715054] igb 0000:07:00.0: eth0: (PCIe:2.5GT/s:Width x1) Apr 10 00:57:21 kernel: [ 33.720720] igb 0000:07:00.0 eth0: MAC: d0:50:99:c2:b3:af Apr 10 00:57:21 kernel: [ 33.726170] igb 0000:07:00.0: eth0: PBA No: 001300-000 Apr 10 00:57:21 kernel: [ 33.735369] igb 0000:07:00.0: LRO is disabled Apr 10 00:57:21 kernel: [ 33.739742] igb 0000:07:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) Apr 10 00:57:21 kernel: [ 33.747834] igb 0000:08:00.0: irq 54 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.752647] igb 0000:08:00.0: irq 55 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 33.807810] igb 0000:08:00.0: added PHC on eth1 Apr 10 00:57:21 kernel: [ 33.812361] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Linux Driver Apr 10 00:57:21 kernel: [ 33.818723] igb 0000:08:00.0: eth1: (PCIe:2.5GT/s:Width x1) Apr 10 00:57:21 kernel: [ 33.824396] igb 0000:08:00.0 eth1: MAC: d0:50:99:c2:b3:b0 Apr 10 00:57:21 kernel: [ 33.829855] igb 0000:08:00.0: eth1: PBA No: 001300-000 Apr 10 00:57:21 kernel: [ 33.838452] igb 0000:08:00.0: LRO is disabled Apr 10 00:57:21 kernel: [ 33.842846] igb 0000:08:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) Apr 10 00:57:21 kernel: [ 33.873472] usb 1-1: new high-speed USB device number 2 using ehci-pci Apr 10 00:57:21 kernel: [ 34.014902] Got empty serial number. Generate serial number from product. Apr 10 00:57:21 kernel: [ 34.022203] hub 1-1:1.0: USB hub found Apr 10 00:57:21 kernel: [ 34.026140] hub 1-1:1.0: 4 ports detected Apr 10 00:57:21 kernel: [ 34.313868] usb 1-1.1: new high-speed USB device number 3 using ehci-pci Apr 10 00:57:21 kernel: [ 34.417374] usb-storage 1-1.1:1.0: USB Mass Storage device detected Apr 10 00:57:21 kernel: [ 34.423775] scsi9 : usb-storage 1-1.1:1.0 Apr 10 00:57:21 kernel: [ 34.512031] usb 1-1.2: new high-speed USB device number 4 using ehci-pci Apr 10 00:57:21 kernel: [ 34.525947] md: md1 stopped. Apr 10 00:57:21 kernel: [ 34.531690] md: bind<sdb2> Apr 10 00:57:21 kernel: [ 34.534670] md: bind<sdc2> Apr 10 00:57:21 kernel: [ 34.537616] md: bind<sdd2> Apr 10 00:57:21 kernel: [ 34.540569] md: bind<sde2> Apr 10 00:57:21 kernel: [ 34.543466] md: bind<sda2> Apr 10 00:57:21 kernel: [ 34.546568] md/raid1:md1: active with 5 out of 16 mirrors Apr 10 00:57:21 kernel: [ 34.604363] md1: detected capacity change from 0 to 2147418112 Apr 10 00:57:21 kernel: [ 34.610720] md1: unknown partition table Apr 10 00:57:21 kernel: [ 34.623266] hub 1-1.2:1.0: USB hub found Apr 10 00:57:21 kernel: [ 34.627361] hub 1-1.2:1.0: 3 ports detected Apr 10 00:57:21 kernel: [ 34.630916] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k Apr 10 00:57:21 kernel: [ 34.707502] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 10 00:57:21 kernel: [ 34.713061] sd 1:0:0:0: Attached scsi generic sg1 type 0 Apr 10 00:57:21 kernel: [ 34.718592] sd 2:0:0:0: Attached scsi generic sg2 type 0 Apr 10 00:57:21 kernel: [ 34.723939] usb 1-1.4: new high-speed USB device number 5 using ehci-pci Apr 10 00:57:21 scemd: scemd.c:805(main) start scemd Apr 10 00:57:21 kernel: [ 34.724148] sd 4:0:0:0: Attached scsi generic sg3 type 0 Apr 10 00:57:21 kernel: [ 34.724333] sd 5:0:0:0: Attached scsi generic sg4 type 0 Apr 10 00:57:21 kernel: [ 34.840683] hub 1-1.4:1.0: USB hub found Apr 10 00:57:21 kernel: [ 34.842624] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.4-NAPI Apr 10 00:57:21 kernel: [ 34.842625] e1000e: Copyright(c) 1999 - 2019 Intel Corporation. Apr 10 00:57:21 kernel: [ 34.857169] hub 1-1.4:1.0: 5 ports detected Apr 10 00:57:21 kernel: [ 34.880941] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.5.5 Apr 10 00:57:21 kernel: [ 34.887932] Copyright(c) 1999 - 2019 Intel Corporation. Apr 10 00:57:21 kernel: [ 34.949370] usb 1-1.2.2: new low-speed USB device number 6 using ehci-pci Apr 10 00:57:21 kernel: [ 35.053017] ixgbe 0000:01:00.0: irq 56 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.058006] ixgbe 0000:01:00.0: irq 57 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.060197] Got empty serial number. Generate serial number from product. Apr 10 00:57:21 kernel: [ 35.069777] ixgbe 0000:01:00.0: irq 58 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.074768] ixgbe 0000:01:00.0: irq 59 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.079749] ixgbe 0000:01:00.0: irq 60 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.084728] ixgbe 0000:01:00.0: irq 61 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.089704] ixgbe 0000:01:00.0: irq 62 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.094684] ixgbe 0000:01:00.0: irq 63 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.099669] ixgbe 0000:01:00.0: irq 64 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.104695] ixgbe 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Apr 10 00:57:21 kernel: [ 35.199695] usb 1-1.4.4: new low-speed USB device number 7 using ehci-pci Apr 10 00:57:21 kernel: [ 35.211292] ixgbe 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) Apr 10 00:57:21 kernel: [ 35.225417] ixgbe 0000:01:00.0 eth2: MAC: 2, PHY: 20, SFP+: 5, PBA No: E70854-008 Apr 10 00:57:21 kernel: [ 35.232915] ixgbe 0000:01:00.0: 90:e2:ba:86:30:28 Apr 10 00:57:21 kernel: [ 35.237635] ixgbe 0000:01:00.0 eth2: Enabled Features: RxQ: 8 TxQ: 8 FdirHash Apr 10 00:57:21 kernel: [ 35.244938] ixgbe 0000:01:00.0 eth2: Intel(R) 10 Gigabit Network Connection Apr 10 00:57:21 kernel: [ 35.368816] Got empty serial number. Generate serial number from product. Apr 10 00:57:21 kernel: [ 35.413307] ixgbe 0000:01:00.1: irq 65 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.418287] ixgbe 0000:01:00.1: irq 66 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.423268] ixgbe 0000:01:00.1: irq 67 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.428242] ixgbe 0000:01:00.1: irq 68 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.433240] ixgbe 0000:01:00.1: irq 69 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.433763] scsi 9:0:0:0: Direct-Access Generic Flash Disk 5.00 PQ: 0 ANSI: 2 Apr 10 00:57:21 kernel: [ 35.434646] sd 9:0:0:0: Attached scsi generic sg5 type 0 Apr 10 00:57:21 kernel: [ 35.438445] sd 9:0:0:0: [synoboot] 3995648 512-byte logical blocks: (2.04 GB/1.90 GiB) Apr 10 00:57:21 kernel: [ 35.439157] sd 9:0:0:0: [synoboot] Write Protect is off Apr 10 00:57:21 kernel: [ 35.439162] sd 9:0:0:0: [synoboot] Mode Sense: 0b 00 00 08 Apr 10 00:57:21 kernel: [ 35.447653] sd 9:0:0:0: [synoboot] No Caching mode page found Apr 10 00:57:21 kernel: [ 35.447655] sd 9:0:0:0: [synoboot] Assuming drive cache: write through Apr 10 00:57:21 kernel: [ 35.465560] sd 9:0:0:0: [synoboot] No Caching mode page found Apr 10 00:57:21 kernel: [ 35.465562] sd 9:0:0:0: [synoboot] Assuming drive cache: write through Apr 10 00:57:21 kernel: [ 35.466151] synoboot: synoboot1 synoboot2 synoboot3 Apr 10 00:57:21 kernel: [ 35.477564] sd 9:0:0:0: [synoboot] No Caching mode page found Apr 10 00:57:21 kernel: [ 35.477566] sd 9:0:0:0: [synoboot] Assuming drive cache: write through Apr 10 00:57:21 kernel: [ 35.477570] sd 9:0:0:0: [synoboot] Attached SCSI removable disk Apr 10 00:57:21 kernel: [ 35.518815] ixgbe 0000:01:00.1: irq 70 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.523794] ixgbe 0000:01:00.1: irq 71 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.528769] ixgbe 0000:01:00.1: irq 72 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.533752] ixgbe 0000:01:00.1: irq 73 for MSI/MSI-X Apr 10 00:57:21 kernel: [ 35.538776] ixgbe 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Apr 10 00:57:21 kernel: [ 35.644010] ixgbe 0000:01:00.1: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) Apr 10 00:57:21 kernel: [ 35.658107] ixgbe 0000:01:00.1 eth3: MAC: 2, PHY: 14, SFP+: 4, PBA No: E70854-008 Apr 10 00:57:21 kernel: [ 35.665607] ixgbe 0000:01:00.1: 90:e2:ba:86:30:29 Apr 10 00:57:21 kernel: [ 35.670320] ixgbe 0000:01:00.1 eth3: Enabled Features: RxQ: 8 TxQ: 8 FdirHash Apr 10 00:57:21 kernel: [ 35.677634] ixgbe 0000:01:00.1 eth3: Intel(R) 10 Gigabit Network Connection Apr 10 00:57:21 kernel: [ 35.700070] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.7.29 Apr 10 00:57:21 kernel: [ 35.708537] i40e: Copyright(c) 2013 - 2018 Intel Corporation. Apr 10 00:57:21 kernel: [ 35.738090] RPC: Registered named UNIX socket transport module. Apr 10 00:57:21 kernel: [ 35.744025] RPC: Registered udp transport module. Apr 10 00:57:21 kernel: [ 35.748735] RPC: Registered tcp transport module. Apr 10 00:57:21 kernel: [ 35.753445] RPC: Registered tcp NFSv4.1 backchannel transport module. Apr 10 00:57:21 kernel: [ 35.808082] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 36.844871] Module [adt7475] is removed. Apr 10 00:57:21 kernel: [ 36.856290] Module [i2c_i801] is removed. Apr 10 00:57:21 kernel: [ 37.881943] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 38.907934] Module [adt7475] is removed. Apr 10 00:57:21 kernel: [ 38.919187] Module [i2c_i801] is removed. Apr 10 00:57:21 kernel: [ 39.945316] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 40.971347] Module [adt7475] is removed. Apr 10 00:57:21 kernel: [ 40.982642] Module [i2c_i801] is removed. Apr 10 00:57:21 kernel: [ 42.008148] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt Apr 10 00:57:21 kernel: [ 42.034477] bromolow_synobios: module license 'Synology Inc.' taints kernel. Apr 10 00:57:21 kernel: [ 42.041538] Disabling lock debugging due to kernel taint Apr 10 00:57:21 kernel: [ 42.050937] synobios open /dev/ttyS1 success Apr 10 00:57:21 kernel: [ 42.055281] 2022-4-10 0:57:16 UTC Apr 10 00:57:21 kernel: [ 42.058611] synobios: load, major number 201 Apr 10 00:57:21 kernel: [ 42.062893] Brand: Synology Apr 10 00:57:21 kernel: [ 42.065696] Model: DS-3615xs Apr 10 00:57:21 kernel: [ 42.068584] set group disks wakeup number to 4, spinup time deno 7 Apr 10 00:57:21 kernel: [ 42.074768] synobios cpu_arch proc entry initialized Apr 10 00:57:21 kernel: [ 42.079736] synobios crypto_hw proc entry initialized Apr 10 00:57:21 kernel: [ 42.084796] synobios syno_platform proc entry initialized Apr 10 00:57:21 kernel: [ 42.101702] Module [bromolow_synobios] is removed. Apr 10 00:57:21 kernel: [ 42.106639] synobios: unload Apr 10 00:57:21 kernel: [ 42.150703] synobios open /dev/ttyS1 success Apr 10 00:57:21 kernel: [ 42.155052] 2022-4-10 0:57:16 UTC Apr 10 00:57:21 kernel: [ 42.158377] synobios: load, major number 201 Apr 10 00:57:21 kernel: [ 42.162660] Brand: Synology Apr 10 00:57:21 kernel: [ 42.165469] Model: DS-3615xs Apr 10 00:57:21 kernel: [ 42.168354] set group disks wakeup number to 4, spinup time deno 7 Apr 10 00:57:21 kernel: [ 42.174541] synobios cpu_arch proc entry initialized Apr 10 00:57:21 kernel: [ 42.179509] synobios crypto_hw proc entry initialized Apr 10 00:57:21 kernel: [ 42.184569] synobios syno_platform proc entry initialized Apr 10 00:57:21 kernel: [ 45.163154] ixgbe 0000:01:00.0: registered PHC device on eth2 Apr 10 00:57:21 kernel: [ 45.331373] ixgbe 0000:01:00.0 eth2: detected SFP+: 5 Apr 10 00:57:21 kernel: [ 45.579629] ixgbe 0000:01:00.0 eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX Apr 10 00:57:21 kernel: [ 45.966809] igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Apr 10 00:57:21 kernel: [ 46.409486] ixgbe 0000:01:00.1: registered PHC device on eth3 Apr 10 00:57:21 kernel: [ 46.578302] ixgbe 0000:01:00.1 eth3: detected SFP+: 4 Apr 10 00:57:21 kernel: [ 48.121470] igb 0000:08:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Apr 10 00:57:22 udhcpc: networking/udhcp/synoether.c (172) MAC address of interface eth1 is [00:11:32:ae:51:fb] Apr 10 00:57:22 udhcpc: networking/udhcp/synoether.c (280) Broadcasting ARPOP_REQUEST for 169.254.17.182 Apr 10 00:57:25 udhcpc: networking/udhcp/synoether.c (172) MAC address of interface eth3 is [00:11:32:c8:87:aa] Apr 10 00:57:25 udhcpc: networking/udhcp/synoether.c (280) Broadcasting ARPOP_REQUEST for 169.254.180.206 Apr 10 00:57:27 findhostd: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 00:57:27 findhostd: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 00:57:27 findhostd: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 00:57:27 findhostd: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 00:57:27 findhostd: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 00:57:27 avahi-daemon[8486]: /etc/avahi/services/http.service: parse failure: service group incomplete. Apr 10 00:57:27 avahi-daemon[8486]: Failed to load service group file /etc/avahi/services/http.service, ignoring. Apr 10 00:57:28 kernel: [ 54.222825] usbcore: registered new interface driver usbhid Apr 10 00:57:28 kernel: [ 54.228413] usbhid: USB HID core driver Apr 10 00:57:28 synohwctrl: invalid microp command 16388 Apr 10 00:57:30 synoagentregisterd: synoagentregisterd.c:129 Generating register key... Apr 10 00:57:30 synoagentregisterd: synoagentregisterd.c:143 Generated register key [B3A0BE66.E358.4DFC.987E.0480F1542006]. Apr 10 00:57:33 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:03 login[8674]: root login on 'pts/0' Apr 10 00:58:06 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 00:58:12 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 00:58:12 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Apr 10 00:58:12 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Apr 10 00:58:12 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Apr 10 00:58:12 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Apr 10 00:58:12 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Apr 10 00:58:12 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Apr 10 00:58:17 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 00:58:23 synoupgrade: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 00:58:23 synoupgrade: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 00:58:23 synoupgrade: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 00:58:23 synoupgrade: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 00:58:23 synoupgrade: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 01:02:18 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 01:02:24 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 01:02:24 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Apr 10 01:02:24 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Apr 10 01:02:24 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Apr 10 01:02:24 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Apr 10 01:02:24 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Apr 10 01:02:24 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Apr 10 01:02:29 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 01:02:35 install.cgi: install.c:520 Unknown param localinstallreq=false Apr 10 01:02:35 install.cgi: install.c:520 Unknown param _dc=1649552556040 Apr 10 01:02:35 install.cgi: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 01:02:35 install.cgi: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 01:02:35 install.cgi: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 01:02:35 install.cgi: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 01:02:35 install.cgi: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 01:02:35 install.cgi: synoupgrade.c:762 system status = 3 Apr 10 01:02:35 install.cgi: ninstaller.c:1648 CreateDataVol=[0] Apr 10 01:02:35 install.cgi: ninstaller.c:152 umount partition /tmpData Apr 10 01:02:35 install.cgi: ninstaller.c:156 Fail to execute [/bin/umount -f /tmpData > /dev/null 2>&1] Apr 10 01:02:35 install.cgi: ninstaller.c:1660 installer cmd=[/usr/syno/sbin/installer.sh -r >> /tmp/installer_sh.log 2>&1] Apr 10 01:02:35 burnin: B1 not started Apr 10 01:02:35 kernel: [ 362.144004] md1: detected capacity change from 2147418112 to 0 Apr 10 01:02:35 kernel: [ 362.149850] md: md1: set sda2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.154394] md: md1: set sde2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.158934] md: md1: set sdd2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.163471] md: md1: set sdc2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.168009] md: md1: set sdb2 to auto_remap [0] Apr 10 01:02:35 kernel: [ 362.172544] md: md1 stopped. Apr 10 01:02:35 kernel: [ 362.175434] md: unbind<sda2> Apr 10 01:02:35 kernel: [ 362.185615] md: export_rdev(sda2) Apr 10 01:02:35 kernel: [ 362.189040] md: unbind<sde2> Apr 10 01:02:35 kernel: [ 362.202617] md: export_rdev(sde2) Apr 10 01:02:35 kernel: [ 362.206043] md: unbind<sdd2> Apr 10 01:02:35 kernel: [ 362.218629] md: export_rdev(sdd2) Apr 10 01:02:35 kernel: [ 362.222054] md: unbind<sdc2> Apr 10 01:02:35 kernel: [ 362.234641] md: export_rdev(sdc2) Apr 10 01:02:35 kernel: [ 362.238068] md: unbind<sdb2> Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm -S /dev/md1" Error="mdadm: stopped /dev/md1 " Apr 10 01:02:35 raidtool: raid_internal_lib.c:158 [Info] clean RAID superblock of /dev/md1 Apr 10 01:02:35 kernel: [ 362.250652] md: export_rdev(sdb2) Apr 10 01:02:35 raidtool: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not name, not match any port type Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: name Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot1 Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot2 Apr 10 01:02:35 raidtool: disk/disk_port_to_container.c:38 Unknown diskType Apr 10 01:02:35 raidtool: partition_path_enum.c:29 Failed to parsing device: synoboot3 Apr 10 01:02:35 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:35 raidtool: partition_layout_get_max.c:117 Choose biggest partition layout version 8. Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdc" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sda" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdc" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sde" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdc" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdd" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sde" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdd" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sdb" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sde" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdd" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdb" Error="" Apr 10 01:02:35 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sdb" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sda" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdc" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sde" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdd" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sdb" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sda" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sde" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdc" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdd" Error="" Apr 10 01:02:36 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sdb" Error="" Apr 10 01:02:39 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:39 kernel: [ 365.770148] md: bind<sda1> Apr 10 01:02:39 kernel: [ 365.773115] md: bind<sdb1> Apr 10 01:02:39 kernel: [ 365.776058] md: bind<sdc1> Apr 10 01:02:39 kernel: [ 365.778988] md: bind<sdd1> Apr 10 01:02:39 kernel: [ 365.781933] md: bind<sde1> Apr 10 01:02:39 kernel: [ 365.784999] md/raid1:md0: active with 5 out of 16 mirrors Apr 10 01:02:39 kernel: [ 365.801559] md0: detected capacity change from 0 to 2549940224 Apr 10 01:02:39 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:42 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:42 kernel: [ 368.884348] md: bind<sda2> Apr 10 01:02:42 kernel: [ 368.887302] md: bind<sdb2> Apr 10 01:02:42 kernel: [ 368.890252] md: bind<sdc2> Apr 10 01:02:42 kernel: [ 368.893189] md: bind<sdd2> Apr 10 01:02:42 kernel: [ 368.896126] md: bind<sde2> Apr 10 01:02:42 kernel: [ 368.899206] md/raid1:md1: active with 5 out of 16 mirrors Apr 10 01:02:42 kernel: [ 368.915627] md1: detected capacity change from 0 to 2147418112 Apr 10 01:02:42 raidtool: raidtool.c:716 system inited on [/dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 ], [/dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2 /dev/sde2 ] Apr 10 01:02:42 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 01:02:42 kernel: [ 368.953956] md1: unknown partition table Apr 10 01:02:42 kernel: [ 368.977717] md0: unknown partition table Apr 10 01:02:42 kernel: [ 369.455617] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:42 kernel: [ 369.464489] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:42 kernel: [ 369.492616] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 01:02:42 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot Apr 10 01:02:43 kernel: [ 369.543935] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.552988] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.570708] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 01:02:43 install.cgi: ninstaller.c:152 umount partition /tmpRoot Apr 10 01:02:43 install.cgi: ninstaller.c:1688 retv=[0] Apr 10 01:02:43 install.cgi: ninstaller.c:1689(ErrFHOSTDoFdiskFormat) retv=[0] Apr 10 01:02:43 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpData Apr 10 01:02:43 kernel: [ 369.589211] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.598212] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 01:02:43 kernel: [ 369.615720] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 01:02:51 install.cgi: synoupgrade.c:1342 Extracting VERSION from Old Patch Format [/tmpData/@autoupdate/upload.pat][/tmpData/@autoupdate] Apr 10 01:02:51 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:02:51 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:02:51 install.cgi: ninstaller.c:1299 Extracting Old Patch Format [/tmpData/upd@te.pat][/tmpData/upd@te] Apr 10 01:02:51 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:02:51 install.cgi: Verify codesign of [/tmpData/upd@te]... Apr 10 01:02:52 synocodesign: BLAKE2b-256 (VERSION) = 3c16247f07120d616ea47916de830318aa8ca98a089748a39e6e5857e05cb23b Apr 10 01:02:52 synocodesign: VERSION: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (zImage) = 9d323d96f4531669462314d7a3eebd02e4139a9042d4314755aedc9c386ec41e Apr 10 01:02:52 synocodesign: zImage: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (updater) = c3d757c3cfb57ff118a9fadd4dd10ca4f3bb1096d0e5cea04eea8f0d32d31ce0 Apr 10 01:02:52 synocodesign: updater: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (GRUB_VER) = 87bbe35ab61ed3d55963efaf61ce0321aacf55444e01618ecdad6bdf06515d88 Apr 10 01:02:52 synocodesign: GRUB_VER: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (rd.gz) = ec36bee9faf69d86e7855c26be41d63a9c7c7c1833d1f603f5a40abf96555796 Apr 10 01:02:52 synocodesign: rd.gz: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (grub_cksum.syno) = ff33f46dd235dc123d8e5a2c834f489bf749805f7f9a2c9be1b4b4724c36fdc1 Apr 10 01:02:52 synocodesign: grub_cksum.syno: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (H2OFFT-Lx64) = 2db64c1694c2e0e86f9650e53e94c751b6a7e9ac55ee7b516c353858455c726a Apr 10 01:02:52 synocodesign: H2OFFT-Lx64: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (bios.ROM) = a61a3746c63b47f7808a720556cbe6bed147132b2d61364a82e15bf9296515c1 Apr 10 01:02:52 synocodesign: bios.ROM: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (isfl_drv_x64.ko) = c6f16e97188fa8e2ccf78d45dbeff8a3e35a4f41947ada40b6e0d30e824027bc Apr 10 01:02:52 synocodesign: isfl_drv_x64.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (isfl_drv_x64_3_2_40.ko) = 7b7dc2b8324b2892df2a216a776a9a1be5ec08b376a4a1ffda5deae2101362de Apr 10 01:02:52 synocodesign: isfl_drv_x64_3_2_40.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (lfdd_drv.ko) = 9329d617237286d4c043efd6a5a1a46ae6a2bc7c738c7c3d8edd72bdc6bdee79 Apr 10 01:02:52 synocodesign: lfdd_drv.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (lfdd_drv_3_2_40.ko) = 20e4bb7f9554ef3081a01996f5864f1beba8b516eb4146a4632627060294660a Apr 10 01:02:52 synocodesign: lfdd_drv_3_2_40.ko: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (platform.ini) = 8421b0d12fba8a9db28923a5cde1be6025878ec08b658a113d08f24bab315b14 Apr 10 01:02:52 synocodesign: platform.ini: OK Apr 10 01:02:52 synocodesign: BLAKE2b-256 (SynoBootLoader.efi) = 38850dbcc41adeb942228d1999507bdc47d6d49654e5a02e09bef6399425cb01 Apr 10 01:02:52 synocodesign: SynoBootLoader.efi: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (hda1.tgz) = 8da6cdf384a31e35213b6a48118e5927a4ae86079f577864469855a198d28054 Apr 10 01:02:55 synocodesign: hda1.tgz: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (indexdb.txz) = 74d10b4076736958d4b14b6afb7a248aa2c880778602f030426c2f642c4b81d9 Apr 10 01:02:55 synocodesign: indexdb.txz: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (synohdpack_img.txz) = 8d03e5297bcb1587085e6a6bdf3e1508b990423ee77b9454a8806b68c05f4c58 Apr 10 01:02:55 synocodesign: synohdpack_img.txz: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/dsm6-ui-compatible-1.0.0-0090.spk) = 21f0ebcd955a0b7ddef976668c8bbcddc680e4cd0a08c051cc8eef81eb618520 Apr 10 01:02:55 synocodesign: packages/dsm6-ui-compatible-1.0.0-0090.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/USBCopy-x86_64-2.2.0-1076.spk) = 43d5accb1e160e73c261e2ee7e929816466141c00701c2217153c422194594d6 Apr 10 01:02:55 synocodesign: packages/USBCopy-x86_64-2.2.0-1076.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk) = d6a26cb39703f18248532a77598bfafa0c5c6a1af8f1bd21c3544a17bd65a366 Apr 10 01:02:55 synocodesign: packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/SecureSignIn-x86_64-1.0.3-0138.spk) = 1cbc1d2c29bd41c177462713beed98a194c903100c19acb611d34f26fdbb63e3 Apr 10 01:02:55 synocodesign: packages/SecureSignIn-x86_64-1.0.3-0138.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/ScsiTarget-x86_64-1.0.2-0207.spk) = cfcc18e7080d14ac49b0cc1d3b400765a3b52cdcb2852abb649b1cb25f10410d Apr 10 01:02:55 synocodesign: packages/ScsiTarget-x86_64-1.0.2-0207.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/SMBService-x86_64-4.10.18-0316.spk) = 415d75a8b0317a6dee0142aaedc084efe4da80bd39f71520adf671972da1ea56 Apr 10 01:02:55 synocodesign: packages/SMBService-x86_64-4.10.18-0316.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/Python2-x86_64-2.7.18-1004.spk) = a081dba0d92d460b9828b50e3848bb09834d0cf46b6ece19721965c3b013b819 Apr 10 01:02:55 synocodesign: packages/Python2-x86_64-2.7.18-1004.spk: OK Apr 10 01:02:55 synocodesign: BLAKE2b-256 (packages/OAuthService-x86_64-1.1.2-0071.spk) = d2c1a75b441827a159dd1662ef4deaf980f08850c16803bc2b0c997a3e82b167 Apr 10 01:02:55 synocodesign: packages/OAuthService-x86_64-1.1.2-0071.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/HybridShare-bromolow-1.2.0-0650.spk) = 1383ed0a35afdbbc7fb452e0eb5559a8fb56009cd3e7306a75a5c4031adff654 Apr 10 01:02:56 synocodesign: packages/HybridShare-bromolow-1.2.0-0650.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/HighAvailability-x86_64-2.1.1-1279.spk) = 923bd2d1896fa6b5b0707a5363589c41c3f5574f83e1fb82aa5aae406030f2c7 Apr 10 01:02:56 synocodesign: packages/HighAvailability-x86_64-2.1.1-1279.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/FileStation-x86_64-1.3.1-1382.spk) = ae14221440cbbb1eccd348e7adf00c2daf85a18e5759390a32a634700fb1faf7 Apr 10 01:02:56 synocodesign: packages/FileStation-x86_64-1.3.1-1382.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/DhcpServer-x86_64-1.0.0-0034.spk) = 19369e16d3653d2adfd3054ecdf195e2f70a7081a7ae67469cb7e5f14e2e93f8 Apr 10 01:02:56 synocodesign: packages/DhcpServer-x86_64-1.0.0-0034.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (packages/ActiveInsight-x86_64-1.1.0-1121.spk) = e3cd03d10840bec796f1d73757c68c81f09710ba94a7fd6745ed3132cb30a3b6 Apr 10 01:02:56 synocodesign: packages/ActiveInsight-x86_64-1.1.0-1121.spk: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/chs/strings) = daaeffe8730f3b64dc5ff3012022d00ff9eccae6498fcc29b50b567db8214755 Apr 10 01:02:56 synocodesign: texts/chs/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/cht/strings) = 8bf545442dffdb3653fbbfc6c1a760cec6895e3c09ba1922c60d776de5f7f965 Apr 10 01:02:56 synocodesign: texts/cht/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/csy/strings) = 414b7446d4271621bb6a62ef756bc29be82881adc1bd8d3ba857e55271fc5d64 Apr 10 01:02:56 synocodesign: texts/csy/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/dan/strings) = 7875012a44709e6e96df56c634adce2b79fc399f655475f91acaeab00f03a39f Apr 10 01:02:56 synocodesign: texts/dan/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/enu/strings) = 0bb2656537d29ca293dfb89a9b646802e4ab2df7897b7eac69984cf048b52e9c Apr 10 01:02:56 synocodesign: texts/enu/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/fre/strings) = 4225e913f64e806446c4311ae204814bd381bdd743a95dd1619e8bf6705a6024 Apr 10 01:02:56 synocodesign: texts/fre/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ger/strings) = 466d3092e6bca364bb9fb12c2b1f85e3c2fd66a9b5d2095ca21e247b97ea9388 Apr 10 01:02:56 synocodesign: texts/ger/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/hun/strings) = 49bdaf196a4a3ef23c6db88a7082770caa5be970c5f4f8b09a5f3f2facf41dbf Apr 10 01:02:56 synocodesign: texts/hun/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ita/strings) = 31260083120ac283cdffbcb5125276f986c653aedfb7b86ed695f0d805bfaf60 Apr 10 01:02:56 synocodesign: texts/ita/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/jpn/strings) = ed7e700421fbcbb235123cb9677878d1cf4e4a8aeb95d5c4672bd02a07f06050 Apr 10 01:02:56 synocodesign: texts/jpn/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/krn/strings) = 9fb3a65a09ba27ed467dc1f69c6018052b8cdb2a78f8777e5d78ea5520c512e2 Apr 10 01:02:56 synocodesign: texts/krn/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/nld/strings) = 0f85cdc97b7ceecee606e717c81e6aa8c95757390ba206c5f2016e448ecfcfb5 Apr 10 01:02:56 synocodesign: texts/nld/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/nor/strings) = 3bca34926da5beb7471c4eb7f0fa8548019f422e6d32bdf79586eae29cb8a9f3 Apr 10 01:02:56 synocodesign: texts/nor/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/plk/strings) = 16f1ad6aec35b00add15764bd61b89ce48385793361c967f1d61912b169b0e9d Apr 10 01:02:56 synocodesign: texts/plk/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ptb/strings) = 43d8df16073f55a31a35f48f0eb58bd0a1b5c933d3518404691769a430d3ef54 Apr 10 01:02:56 synocodesign: texts/ptb/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/ptg/strings) = 70959b1947a9084653b0f2c02a259ae384bed0f943f915fad36820e91b71a9f4 Apr 10 01:02:56 synocodesign: texts/ptg/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/rus/strings) = a7284a09f64c3b30e37b4277ed3f6ed353aa2f5b1b889ac35a26139a7e2b4696 Apr 10 01:02:56 synocodesign: texts/rus/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/spn/strings) = 4d23573dd30d3cd1237ebcbb5a245ec92fe64cd12df7e03ba7361acf9d70f687 Apr 10 01:02:56 synocodesign: texts/spn/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/sve/strings) = 962f68c534ccb1c2fb16203ead371c40086ed87d067266486b1397699d3f640f Apr 10 01:02:56 synocodesign: texts/sve/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/tha/strings) = f6fe4677f6d67d40127a0f99984a040721ed0b6d5245e0426c809d3b78233c7d Apr 10 01:02:56 synocodesign: texts/tha/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (texts/trk/strings) = 1f45e3781d7357e229f76e8f6bb3a96b86c49bd6c3880c089bd74f4e6c9fe942 Apr 10 01:02:56 synocodesign: texts/trk/strings: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (expired_models) = efbb8e376238e2ed1a5e064c89aae01f6eafcb75e9060a36d7a84b154da7fabd Apr 10 01:02:56 synocodesign: expired_models: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (DiskCompatibilityDB.tar) = 180fd42ec737ef730fc046810bc7b6714c27b4407bb5197d9756d6eaba0096c4 Apr 10 01:02:56 synocodesign: DiskCompatibilityDB.tar: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/infoset) = b1fc7004374f8532e0ee6b32e2ac17e53f64d45f09d9cccee2514c3440a44e9f Apr 10 01:02:56 synocodesign: ha_dummy_ocf/infoset: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_rear) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Apr 10 01:02:56 synocodesign: ha_dummy_ocf/dsm_rear: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_first) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Apr 10 01:02:56 synocodesign: ha_dummy_ocf/dsm_first: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (ha_dummy_ocf/PromoteBegin) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Apr 10 01:02:56 synocodesign: ha_dummy_ocf/PromoteBegin: OK Apr 10 01:02:56 synocodesign: BLAKE2b-256 (synohamessaged-update) = 52ac972856675e13ec8b1c4891deb04037b7774534b75b93a0da4561834c3f8a Apr 10 01:02:56 synocodesign: synohamessaged-update: OK Apr 10 01:02:56 install.cgi: RemoveUpgradeFile: Remove /tmpData/upd@te.pat... Apr 10 01:02:56 install.cgi: Verify checksum of [/tmpData/upd@te]... Apr 10 01:02:58 install.cgi: Pass checksum of /tmpData/upd@te... Apr 10 01:02:58 updater: updater.c:6767 Start of the updater... Apr 10 01:02:58 updater: updater.c:3227 orgBuildNumber = 42218, newBuildNumber=42218 Apr 10 01:02:58 updater: util/updater_util.cpp:86 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf Apr 10 01:02:58 updater: updater.c:7045 ==== Start flash update ==== Apr 10 01:02:58 updater: updater.c:7049 This is X86 platform Apr 10 01:02:58 kernel: [ 384.816372] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.824113] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.850398] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.858134] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.884305] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 kernel: [ 384.892037] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:02:58 updater: updater.c:7065 The SynoBoot partitions exist. Apr 10 01:02:58 updater: updater.c:4072 SYNORedBootUpdCheckAndApply(4072): Skip bootloader update, no uboot_do_upd.sh exists Apr 10 01:02:58 kernel: [ 384.918329] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:02:58 updater: updater.c:616 checksum generated by [/bin/grep -i zImage checksum.syno >> /tmp/checksum.syno.tmp] Apr 10 01:02:58 updater: updater.c:645 file [zImage] is being copied to [/tmp/bootmnt] Apr 10 01:02:58 updater: updater.c:653 file [/tmp/bootmnt/zImage] process done. Apr 10 01:02:58 updater: updater.c:616 checksum generated by [/bin/grep -i rd.gz checksum.syno >> /tmp/checksum.syno.tmp] Apr 10 01:02:58 updater: updater.c:645 file [rd.gz] is being copied to [/tmp/bootmnt] Apr 10 01:02:58 updater: updater.c:653 file [/tmp/bootmnt/rd.gz] process done. Apr 10 01:02:58 updater: updater.c:616 checksum generated by [/bin/grep -i grub_cksum.syno checksum.syno >> /tmp/checksum.syno.tmp] Apr 10 01:02:58 updater: updater.c:645 file [grub_cksum.syno] is being copied to [/tmp/bootmnt] Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/grub_cksum.syno] process done. Apr 10 01:02:59 updater: updater.c:636 file [/tmp/bootmnt/hda1.tgz] is being removed Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/hda1.tgz] process done. Apr 10 01:02:59 updater: updater.c:636 file [/tmp/bootmnt/updater] is being removed Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/updater] process done. Apr 10 01:02:59 updater: updater.c:636 file [/tmp/bootmnt/VERSION] is being removed Apr 10 01:02:59 updater: updater.c:653 file [/tmp/bootmnt/VERSION] process done. Apr 10 01:02:59 updater: updater.c:663 checksum file updated by [/bin/cp -f /tmp/checksum.syno.tmp /tmp/bootmnt/checksum.syno] Apr 10 01:03:00 kernel: [ 387.471885] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:05 kernel: [ 392.503138] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.935387] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.961865] FAT-fs (synoboot1): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.970995] FAT-fs (synoboot1): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 392.998769] FAT-fs (synoboot1): fat_set_state: set=1 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 393.006506] FAT-fs (synoboot1): fat_set_state: set=0 process=updater pid=9698 Apr 10 01:03:06 kernel: [ 393.029988] lfdd: Linux Firmware Debug Driver Version 0.1.0 Apr 10 01:03:06 kernel: [ 393.037902] Module [isfl_drv] is removed. Apr 10 01:03:06 kernel: [ 393.043324] Module [lfdd_drv] is removed. Apr 10 01:03:06 kernel: [ 393.047671] lfdd lfdd_exit: driver unloaded. Apr 10 01:03:06 updater: updater.c:7432 ==== Finish flash update ==== Apr 10 01:03:06 updater: updater.c:7448 ==== Start updater backup flash image ==== Apr 10 01:03:06 updater: updater.c:5511 successfully backup image for System Migration in path (/tmpRoot/.syno/patch). Apr 10 01:03:06 updater: updater.c:7456 ==== Finish updater backup flash image ==== Apr 10 01:03:06 updater: updater.c:7465 ==== Start updater move/extract hda1 and packages ==== Apr 10 01:03:06 updater: updater.c:5910 Decompress hda1.tgz to SynoUpgrade.tar Apr 10 01:03:47 updater: updater.c:5774 checksum of /tmpData/SynoUpgrade.tar is written Apr 10 01:03:47 updater: updater.c:5997 file /tmpData/upd@te/sas_fw_upgrade_tool does not exist, skips handling it Apr 10 01:03:47 updater: updater.c:7473 ==== Finish updater move/extract hda1 and packages ==== Apr 10 01:03:47 updater: updater.c:7482 ==== Start updater flag agent unregister ==== Apr 10 01:03:47 updater: updater.c:7488 ==== Finish updater flag agent unregister ==== Apr 10 01:03:47 updater: updater.c:7497 ==== Start updater handling bootup smallupdate ==== Apr 10 01:05:43 updater: update_cpputil_core.cpp:371 synoinstall: Failed to ExecWgetWithRetry[0x2000 file_get_key_value.c:80] Apr 10 01:05:43 updater: update_cpputil_core.cpp:372 synoinstall: , return[1], url[https://update7.synology.com/smallupdate/v2/42218/synology_bromolow_3615xs/update.json] Apr 10 01:05:44 updater: (autonano.cpp:494) HandleBootupSmallUpdate interrupted Apr 10 01:05:44 updater: root cause type is: std::runtime_error Apr 10 01:05:44 updater: with nested exception: Apr 10 01:05:44 updater: - (autonano.cpp:187) Unable to obtain Packed SmallUpdate. Skip Packed SmallUpdate Flash Install. Apr 10 01:05:44 updater: - (autonano.cpp:169) Failed to download patch [42218][/tmpData/.SynoUpgradeBootupSmallUpdate.pat] Apr 10 01:05:44 updater: - (autonano.cpp:139) Failed to LookUpServer Apr 10 01:05:44 updater: - (autonano.cpp:133) Failed to download security json via wget from url: https://update7.synology.com/smallupdate/v2/42218/synology_bromolow_3615xs/update.json Apr 10 01:05:44 updater: updater.c:7507 ==== Finish updater handling bootup smallupdate ==== Apr 10 01:05:44 updater: updater.c:7520 ==== Finish updater post-action ==== Apr 10 01:05:44 updater: updater.c:7568 Congratulations!! The update has been completed!! Do configupdate when next bootup. Apr 10 01:05:44 install.cgi: ninstaller.c:1546 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[0] Apr 10 01:05:44 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Apr 10 01:05:44 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat... Apr 10 01:05:44 install.cgi: ninstaller.c:1811(ErrFHOSTDoUpgrade) err=[0] Apr 10 01:05:44 install.cgi: ninstaller.c:1815(ErrFHOSTDoUpgrade) retv=[0] Apr 10 01:05:44 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /mnt Apr 10 01:05:44 install.cgi: ninstaller.c:152 umount partition /mnt Apr 10 01:05:44 install.cgi: ninstaller.c:152 umount partition /tmpData I am not sure what is going on... it looks like the raid10 is not okay.. and it cannot mount /dev/md0... can anybody give me some advice? Thanks! The repetition of the installation was probably deeply related to sataportmap. Do not install all hard drives, install only one SSD on the physical port that you think is the first port, turn on the hot plug, and simplify the sataportmap for now. Try sataportmap=1, diskidxmap=00. If this method succeeds, test it by increasing the number of hdds. Quote Link to comment Share on other sites More sharing options...
mcdull Posted April 10, 2022 Share #2187 Posted April 10, 2022 I am having problem to build with v1000 Error starting from Quote NO NVME disks found, returning Converting dts file : ds1621p.dts to dtb file : >ds1621p.dtb ./rploader.sh: line 803: dtb extension is not loaded and its required for DSM to find disks on ds1621p_42218: command not found Copy of the DTB file ds1621p.dtb to was not succesfull. Please remember to replace the dtb extension model file ... execute manually : cp ds1621p.dtb and re-run Also I saw ^M characters after each lines in many json files. Is it normal? Thanks. Quote Link to comment Share on other sites More sharing options...
kekesed97 Posted April 10, 2022 Share #2188 Posted April 10, 2022 (edited) 1 hour ago, Dreadnought said: Is anyone of you facing a shutdown problem. I went through a successful installation, but then my NAS is shutting down itself? I was also unable to install https://github.com/pocopico/redpill-load/tree/master/redpill-acpid from here 1 hour ago, Peter Suh said: It is already mentioned above, but I experienced it in DVA3221. I've tried to install broadwellnk-7.1 and bromolow-7.1, and I'm facing shutdown issue after services loaded with both installation methods. Now I'm unplugging my test drives and reverting to broadwellnk-7.0.1. Edited April 10, 2022 by kekesed97 Quote Link to comment Share on other sites More sharing options...
RedCat Posted April 10, 2022 Share #2189 Posted April 10, 2022 Hello I have an xpenology 918+ 6.2.3 system with jun1.4 loader on proxmox. It works perfect. Now I installed 918+ 7.0.1 system with redpill. The new system works too. But I cant migrate. If I connect my old 6.2.3 hdds to 7.0.1, then 7.0.1 dont start. How can connect my hdds to new system? Or how can I upgrade 6.2.3 system to 7.0.1 under proxmox? I tired another test system on proxmox also, I maked new 6.2.3 system. It works. If I make new hdd with redpill in this system, the system dont boot. If disconnect 6.2.3 hdd then redpill loader boot (tinicore linux booting, I can make loader, but 918+ dont boot). What is wrong? Thx Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 10, 2022 Share #2190 Posted April 10, 2022 15 hours ago, Peter Suh said: [DS918+] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS918+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build apollolake-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build apollolake-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; I see a bunch of people complaining and saying it doesn't work, this is not my experience. For the record, these directions worked on baremetal with dsm 7.0.1 -> dsm 7.1.0 manual upgrade and fresh build directly to dsm 7.1.0. Yes I tried both ways, and worked fine both times. I had no errors with unencryption, installation or anything. Up and running 7.1 for many hours doing a hyperbackup Many thanks to @pocopico and the entire RP group, also @Peter Suh for the great directions. 1 Quote Link to comment Share on other sites More sharing options...
gadreel Posted April 10, 2022 Share #2191 Posted April 10, 2022 3 hours ago, Peter Suh said: Maybe you want @pocopico's his own guide. He entrusted the installation guide to me. Please try the installation guide above and raise the exact problem. @Peter Suh if this is the case then I recommend you to add the guides into a different topic so that it's not mixed with all the issues and is easier for all the users to find them. Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2192 Posted April 10, 2022 7 hours ago, RacerX said: I need a little asistance with the adaptec aic94xx extension My adaptec 71605 card does not show up in tc with lspci -v Here is what is says in proxmox 7.01 06:00.0 RAID bus controller: Adaptec Series 7 6G SAS/PCIe 3 (rev 01) Subsystem: Adaptec Series 7 - ASR-71605 - 16 internal 6G SAS Port/PCIe 3.0 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f7100000 (64-bit, non-prefetchable) [size=1M] Memory at f7280000 (64-bit, non-prefetchable) [size=1K] I/O ports at a000 [size=256] Expansion ROM at f7200000 [disabled] [size=512K] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+ Capabilities: [b0] MSI-X: Enable+ Count=64 Masked- Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [300] Secondary PCI Express Kernel driver in use: aacraid Kernel modules: aacraid uname -r 5.13.19-2-pve Will the extension work even if tc doesn't see the card? When you run ./rploader.sh satamap now it will load the required modules Quote Link to comment Share on other sites More sharing options...
MajkelP Posted April 10, 2022 Share #2193 Posted April 10, 2022 15 hours ago, Peter Suh said: So far, a total of three platforms have been successfully installed with BAREMETAL. The method is to start from 7.0.1 build as guided by @pocopico It is a two step update build method. The rest of the platforms still have errors, so I will continue to report bugs to @pocopico. The following commands were used. [DS3622xs+] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build broadwellnk-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build broadwellnk-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Hello @Peter Suh Thank you so much for this guide, I have successful installed with your guide, but I had to use pat file from Synology (DSM_DS3622xs+_42661.pat) rather than from TC cache folder. During the installation with .pat file downloaded via TC I had error message that the file is corrupted. I installed version 7.1 straight away. 1 Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 10, 2022 Share #2194 Posted April 10, 2022 31 minutes ago, RedCat said: Hello I have an xpenology 918+ 6.2.3 system with jun1.4 loader on proxmox. It works perfect. Now I installed 918+ 7.0.1 system with redpill. The new system works too. But I cant migrate. If I connect my old 6.2.3 hdds to 7.0.1, then 7.0.1 dont start. How can connect my hdds to new system? Or how can I upgrade 6.2.3 system to 7.0.1 under proxmox? I tired another test system on proxmox also, I maked new 6.2.3 system. It works. If I make new hdd with redpill in this system, the system dont boot. If disconnect 6.2.3 hdd then redpill loader boot (tinicore linux booting, I can make loader, but 918+ dont boot). What is wrong? Thx I would assume it should migrate over, but since your on proxmox its easy for you to test without risk of your 6.2.3 data. Create a new vm with Jun1.4 loader and dsm 6.2.3, put some data on it, then manually upgrade dsm from 623 to 7.0.1 or 7.1 (your choice), then when it wants to reboot, install rp 7.0.1 or rp 7.1 loader on that vm, and finish loading your test dsm623 to see if it migrates successfully.... if it does, you have the path for your real dsm623 with data. Thats what I would try. Quote Link to comment Share on other sites More sharing options...
RedCat Posted April 10, 2022 Share #2195 Posted April 10, 2022 22 minutes ago, phone guy said: I would assume it should migrate over, but since your on proxmox its easy for you to test without risk of your 6.2.3 data. Create a new vm with Jun1.4 loader and dsm 6.2.3, put some data on it, then manually upgrade dsm from 623 to 7.0.1 or 7.1 (your choice), then when it wants to reboot, install rp 7.0.1 or rp 7.1 loader on that vm, and finish loading your test dsm623 to see if it migrates successfully.... if it does, you have the path for your real dsm623 with data. Thats what I would try. Thank you for your answer. I tired it twice, but if start the manual (and online also) upgrade, it stop at 2%, and write: "an unknown error occurred". I can just press the OK button, and 6.2.3 reload. Quote Link to comment Share on other sites More sharing options...
Bose321 Posted April 10, 2022 Share #2196 Posted April 10, 2022 (edited) On 4/8/2022 at 9:45 AM, Bose321 said: Just tried to set it to e1000 in Unraid (via de XML editor), and again in the loader I see the e1000 interface, and I've got internet and an IP address and it works, but after building again only a lo adapter. During the build I even see that it does say to load the e1000 adapter for ethernet. What's wrong here? Anyone that can help me with this? I've tried both virtio, virtio-net, and e1000 as ethernet adapter in Unraid, and all 3 of them are seen in the loader, but not after building. Am I missing some extensions or commands that I should run? Maybe @pocopicoyou could shed some light on this? Worked great on Vmware before. Edited April 10, 2022 by Bose321 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2197 Posted April 10, 2022 4 hours ago, Peter Suh said: So, I modified the config.json file myself and replaced it with the correct url, and the build was successfully completed. However, dsm stops and the PC is turned off during the boot process of dva3221. Fixed Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 10, 2022 Author Share #2198 Posted April 10, 2022 (edited) Fixed also the config for DS3617xs and succesfully upgraded to 42661 using the TCRP postupdate process Edited April 10, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
Jeja Posted April 10, 2022 Share #2199 Posted April 10, 2022 @Peter Suh Thnx for the guides, I'm not sure which one to use. I have 1 Xpenology DS3615xs on 7.0.1 and I want to upgrade to 7.1 Do I need to use the 2 step upgrade ? And if I want to build a new fresh DS3622xs with 7.1 ? Thnx ! Quote Link to comment Share on other sites More sharing options...
shennn0 Posted April 10, 2022 Share #2200 Posted April 10, 2022 (edited) 4 hours ago, Peter Suh said: The repetition of the installation was probably deeply related to sataportmap. Do not install all hard drives, install only one SSD on the physical port that you think is the first port, turn on the hot plug, and simplify the sataportmap for now. Try sataportmap=1, diskidxmap=00. If this method succeeds, test it by increasing the number of hdds. I tried with one single HD inserted in SATA0 of the first controller in grub i used sataportmap=1, diskixdmap=00. hotplug is 1 and in bios the hotplug is enabled for all SATA Again i could install but it keeps rebooting into installer into an infinite loop I also tried sataportmap=4224 and diskidxmap=00020408 and sataportmap=4224 and diskidxmap=00040608. all same result infine loop of installer.... This is the log when i look for the first SATA port, and start the installing process by uploading the *.pat file it does see sd 0:0:0:0 [sda] But for some reason it cannot format the partitions correctly and mount it to /dev/md0 .... Apr 10 10:35:04 kernel: [ 513.232169] ata1: link is slow to respond, please be patient (ready=0) Apr 10 10:35:06 kernel: [ 515.841197] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 10 10:35:06 kernel: [ 515.853102] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 Apr 10 10:35:06 kernel: [ 515.859385] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA Apr 10 10:35:06 kernel: [ 515.866531] ata1.00: SN:S246J9CZ902228 Apr 10 10:35:06 kernel: [ 515.876031] ata1.00: configured for UDMA/133 Apr 10 10:35:06 kernel: [ 515.880342] ata1.00: Write Cache is enabled Apr 10 10:35:06 kernel: [ 515.884541] ata1: EH complete Apr 10 10:35:06 kernel: [ 515.893262] scsi 0:0:0:0: Direct-Access SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 Apr 10 10:35:06 kernel: [ 515.902440] <redpill/scsi_notifier.c:65> Probing SCSI device using sd_probe_shim Apr 10 10:35:06 kernel: [ 515.909847] <redpill/scsi_notifier.c:77> Triggering SCSI_EVT_DEV_PROBING notifications Apr 10 10:35:06 kernel: [ 515.917766] <redpill/scsi_notifier.c:87> Calling original sd_probe() Apr 10 10:35:06 kernel: [ 515.924330] <redpill/scsi_notifier.c:91> Triggering SCSI_EVT_DEV_PROBED notifications - sd_probe() exit=0 Apr 10 10:35:06 kernel: [ 515.924414] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Apr 10 10:35:06 kernel: [ 515.924529] sd 0:0:0:0: [sda] Write Protect is off Apr 10 10:35:06 kernel: [ 515.924532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Apr 10 10:35:06 kernel: [ 515.924578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 10 10:35:06 kernel: [ 515.960806] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 10 10:35:06 kernel: [ 515.988981] sda: sda1 sda2 Apr 10 10:35:06 kernel: [ 515.992631] sd 0:0:0:0: [sda] Attached SCSI disk Apr 10 10:35:08 kernel: [ 517.242378] <redpill/bios_shims_collection.c:44> mfgBIOS: nullify zero-int for VTK_SET_DISK_LED Apr 10 10:35:52 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 10:35:57 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 10:35:57 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Apr 10 10:35:57 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Apr 10 10:35:57 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Apr 10 10:35:57 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Apr 10 10:35:57 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Apr 10 10:35:57 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Apr 10 10:36:03 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 10:36:08 kernel: [ 577.487385] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop Apr 10 10:36:08 kernel: [ 577.508759] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop Apr 10 10:36:35 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 10:36:40 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 10:36:40 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Apr 10 10:36:40 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Apr 10 10:36:40 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Apr 10 10:36:40 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Apr 10 10:36:40 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Apr 10 10:36:40 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Apr 10 10:36:46 synoupgrade: synoupgrade.c:267 Failed to get root partition version Apr 10 10:36:51 kernel: [ 620.230144] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop Apr 10 10:36:51 kernel: [ 620.251885] <redpill/smart_shim.c:354> ATA_CMD_ID_ATA confirmed SMART support - noop Apr 10 10:36:51 install.cgi: install.c:520 Unknown param localinstallreq=false Apr 10 10:36:51 install.cgi: install.c:520 Unknown param _dc=1649587012081 Apr 10 10:36:51 install.cgi: ninstaller.c:683 Dev: sda, DiskPath: /dev/sda, Partition version: 8 Apr 10 10:36:51 install.cgi: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Apr 10 10:36:51 install.cgi: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Apr 10 10:36:51 install.cgi: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Apr 10 10:36:51 install.cgi: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Apr 10 10:36:51 install.cgi: synoupgrade.c:762 system status = 3 Apr 10 10:36:51 install.cgi: ninstaller.c:1648 CreateDataVol=[0] Apr 10 10:36:51 install.cgi: ninstaller.c:152 umount partition /tmpData Apr 10 10:36:51 install.cgi: ninstaller.c:156 Fail to execute [/bin/umount -f /tmpData > /dev/null 2>&1] Apr 10 10:36:51 install.cgi: ninstaller.c:1660 installer cmd=[/usr/syno/sbin/installer.sh -r >> /tmp/installer_sh.log 2>&1] Apr 10 10:36:51 burnin: B1 not started Apr 10 10:36:51 kernel: [ 620.387835] md1: detected capacity change from 2147418112 to 0 Apr 10 10:36:51 kernel: [ 620.393688] md: md1 stopped. Apr 10 10:36:51 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/mdadm -S /dev/md1" Error="mdadm: stopped /dev/md1 " Apr 10 10:36:51 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 10:36:51 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete 1:2 /dev/sda" Error="" Apr 10 10:36:51 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Apr 10 10:36:51 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Apr 10 10:36:51 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sda" Error="" Apr 10 10:36:51 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sda" Error="" Apr 10 10:36:54 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 10:36:55 kernel: [ 623.588849] md: bind<sda1> Apr 10 10:36:55 kernel: [ 623.591904] md/raid1:md0: active with 1 out of 16 mirrors Apr 10 10:36:55 kernel: [ 623.613498] md0: detected capacity change from 0 to 2549940224 Apr 10 10:36:55 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 10:36:58 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 10:36:58 kernel: [ 626.683641] md: bind<sda2> Apr 10 10:36:58 kernel: [ 626.686740] md/raid1:md1: active with 1 out of 16 mirrors Apr 10 10:36:58 kernel: [ 626.708272] md1: detected capacity change from 0 to 2147418112 Apr 10 10:36:58 raidtool: raidtool.c:716 system inited on [/dev/sda1 ], [/dev/sda2 ] Apr 10 10:36:58 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Apr 10 10:36:58 kernel: [ 626.727942] md1: unknown partition table Apr 10 10:36:58 kernel: [ 626.777026] md0: unknown partition table Apr 10 10:37:00 kernel: [ 629.328866] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 10:37:00 kernel: [ 629.337711] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 10:37:00 kernel: [ 629.379753] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 10:37:00 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot Apr 10 10:37:00 kernel: [ 629.474926] <redpill/pmu_shim.c:310> Got 2 bytes from PMU: reason=1 hex={2d 72} ascii="-r" Apr 10 10:37:00 kernel: [ 629.483205] <redpill/pmu_shim.c:239> Executing cmd OUT_SCHED_UP_OFF handler cmd_shim_noop+0x0/0x30 [redpill] Apr 10 10:37:00 kernel: [ 629.483280] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 10:37:00 kernel: [ 629.483425] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 10:37:00 kernel: [ 629.510410] <redpill/pmu_shim.c:45> vPMU received OUT_SCHED_UP_OFF using 1 bytes - NOOP Apr 10 10:37:00 kernel: [ 629.537837] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Apr 10 10:37:00 install.cgi: ninstaller.c:152 umount partition /tmpRoot Apr 10 10:37:00 install.cgi: ninstaller.c:1688 retv=[0] Apr 10 10:37:00 install.cgi: ninstaller.c:1689(ErrFHOSTDoFdiskFormat) retv=[0] Apr 10 10:37:00 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpData Apr 10 10:37:00 kernel: [ 629.556017] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 10:37:00 kernel: [ 629.564867] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) Apr 10 10:37:01 kernel: [ 629.587840] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Also after the installation i see a Post install trying to fetch patch update 2 but the url is not correct i'm getting a 404 Apr 10 11:04:47 updater: update_cpputil_core.cpp:371 synoinstall: Failed to ExecWgetWithRetry[0x2000 file_get_key_value.c:80] Apr 10 11:04:47 updater: update_cpputil_core.cpp:372 synoinstall: , return[1], url[https://update7.synology.com/smallupdate/v2/42218/synology_bromolow_3615xs/update.json] Apr 10 11:04:47 updater: (autonano.cpp:494) HandleBootupSmallUpdate interrupted Apr 10 11:04:47 updater: root cause type is: std::runtime_error Apr 10 11:04:47 updater: with nested exception: Apr 10 11:04:47 updater: - (autonano.cpp:187) Unable to obtain Packed SmallUpdate. Skip Packed SmallUpdate Flash Install. Apr 10 11:04:47 updater: - (autonano.cpp:169) Failed to download patch [42218][/tmpData/.SynoUpgradeBootupSmallUpdate.pat] Apr 10 11:04:47 updater: - (autonano.cpp:139) Failed to LookUpServer Apr 10 11:04:47 updater: - (autonano.cpp:133) Failed to download security json via wget from url: https://update7.synology.com/smallupdate/v2/42218/synology_bromolow_3615xs/update.json Apr 10 11:04:47 updater: updater.c:7507 ==== Finish updater handling bootup smallupdate ==== Apr 10 11:04:47 updater: updater.c:7520 ==== Finish updater post-action ==== Apr 10 11:04:47 updater: updater.c:7568 Congratulations!! The update has been completed!! Do configupdate when next bootup. Apr 10 11:04:47 install.cgi: ninstaller.c:1546 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[0] Apr 10 11:04:47 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Apr 10 11:04:47 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat... Apr 10 11:04:47 install.cgi: ninstaller.c:1811(ErrFHOSTDoUpgrade) err=[0] Apr 10 11:04:47 install.cgi: ninstaller.c:1815(ErrFHOSTDoUpgrade) retv=[0] Apr 10 11:04:47 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /mnt Apr 10 11:04:47 install.cgi: ninstaller.c:152 umount partition /mnt Apr 10 11:04:47 install.cgi: ninstaller.c:152 umount partition /tmpData Edited April 10, 2022 by shennn0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.