Dvalin21 Posted April 9, 2022 Share #2101 Posted April 9, 2022 @Peter SuhI'm almost to the point of booting, but I ran into this issue [-] The extension PeterSuh-Q3.tg3 was found. However, the extension index has no recipe for ds3622xsp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== PeterSuh-Q3.tg3 ========================================== [#] Extension name: tg3 [#] Description: Adds Broadcom Tigon3 ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/master/tg3 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/tg3/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3615xs_25556 ds918p_42218 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for PeterSuh-Q3.tg3 extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== PeterSuh-Q3.tg3 ========================================== [#] Extension name: tg3 [#] Description: Adds Broadcom Tigon3 ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/master/tg3 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/tg3/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3615xs_25556 ds918p_42218 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds3622xsp_42661 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 9, 2022 Share #2102 Posted April 9, 2022 36 minutes ago, Peter Suh said: Google Drive's tc.zip was deleted due to permission issues and replaced with the following tc.tgz. https://drive.google.com/file/d/1Msg-dBHns__GexG0WcA6qdS6RI30YqH_/view?usp=sharing scp [download path]/tc.tgz tc@192.168.1.2:/home cd /home sudo rm -rf tc tar -xvf tc.tgz cd tc Just saw this, will try it now Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2103 Posted April 9, 2022 (edited) Due to the authority issue, unnecessary commands were organized and further simplified. If you only use Intel LAN, you only need to execute 3 commands that are marked big and bold. --------------------------------------------------------------------------------------------------------- https://drive.google.com/file/d/1Msg-dBHns__GexG0WcA6qdS6RI30YqH_/view?usp=sharing scp [download path]/tc.tgz tc@192.168.1.2:/home tc@box:~$ cd /home; sudo rm -rf tc; tar -xvf tc.tgz; cd tc; (Add if needed) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/mpt3sas/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8169/rpext-index.json (Add to Virtual Environment) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/vmxnet3/rpext-index.json (type y for all questions ./rploader.sh build broadwellnk-7.0.1-42218 manual (This question needs to come up) Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y (type y for all questions) ./rploader.sh build broadwellnk-7.1.0-42661 manual ------------------------------------------------------------------------ (EXT already included) ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-load/raw/develop/redpill-misc/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-ext/blob/master/redpill-boot-wait/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json Edited April 9, 2022 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 9, 2022 Share #2104 Posted April 9, 2022 29 minutes ago, Peter Suh said: Due to the authority issue, unnecessary commands were organized and further simplified. --------------------------------------------------------------------------------------------------------- https://drive.google.com/file/d/1Msg-dBHns__GexG0WcA6qdS6RI30YqH_/view?usp=sharing scp [download path]/tc.tgz tc@192.168.1.2:/home tc@box:~$ cd /home; sudo rm -rf tc; tar -xvf tc.tgz; cd tc; (Add if needed) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/mpt3sas/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8169/rpext-index.json (Add to Virtual Environment) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/vmxnet3/rpext-index.json (type y for all questions ./rploader.sh build broadwellnk-7.0.1-42218 manual (This question needs to come up) Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y (type y for all questions) ./rploader.sh build broadwellnk-7.1.0-42661 manual ------------------------------------------------------------------------ (EXT already included) ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-load/raw/develop/redpill-misc/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-ext/blob/master/redpill-boot-wait/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json Also getting the following [-] The extension PeterSuh-Q3.tg3 was found. However, the extension index has no recipe for ds3622xsp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== PeterSuh-Q3.tg3 ========================================== [#] Extension name: tg3 [#] Description: Adds Broadcom Tigon3 ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/master/tg3 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/tg3/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3615xs_25556 ds918p_42218 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for PeterSuh-Q3.tg3 extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== PeterSuh-Q3.tg3 ========================================== [#] Extension name: tg3 [#] Description: Adds Broadcom Tigon3 ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/master/tg3 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/tg3/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3615xs_25556 ds918p_42218 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds3622xsp_42661 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2105 Posted April 9, 2022 (edited) 14 minutes ago, Dvalin21 said: Also getting the following [-] The extension PeterSuh-Q3.tg3 was found. However, the extension index has no recipe for ds3622xsp_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== PeterSuh-Q3.tg3 ========================================== [#] Extension name: tg3 [#] Description: Adds Broadcom Tigon3 ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/master/tg3 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/tg3/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3615xs_25556 ds918p_42218 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for PeterSuh-Q3.tg3 extension for platform ds3622xsp_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== PeterSuh-Q3.tg3 ========================================== [#] Extension name: tg3 [#] Description: Adds Broadcom Tigon3 ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/master/tg3 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/tg3/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3615xs_25556 ds918p_42218 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds3622xsp_42661 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors Updated tg3 ext ds3622xsp_42661 to correspond Edited April 9, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2106 Posted April 9, 2022 Hi, all extensions have been update and cleaned up for 42661. 2 Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 9, 2022 Share #2107 Posted April 9, 2022 14 minutes ago, pocopico said: Hi, all extensions have been update and cleaned up for 42661. Does that include for apollolake? I am running 7.0.1u3 as ds918, does this mean I will be able to update to dsm7.1? Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2108 Posted April 9, 2022 2 minutes ago, phone guy said: Does that include for apollolake? I am running 7.0.1u3 as ds918, does this mean I will be able to update to dsm7.1? Yes 1 1 Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 9, 2022 Share #2109 Posted April 9, 2022 Sorry, but to be clear, is it the postupdate procedure or just a new buid to 7.1-42661 Quote Link to comment Share on other sites More sharing options...
Kaneske Posted April 9, 2022 Share #2110 Posted April 9, 2022 Too less time to read all 10 pages… Procedure like RC then… 4 terminal commands and ready to go then? or something important new? Quote Link to comment Share on other sites More sharing options...
Xenos Posted April 9, 2022 Share #2111 Posted April 9, 2022 В 08.04.2022 в 13:48, Xenos сказал: Board ECS BAT-I2 V1.0 (J1800 w/Realtek Eth) Solved. FW downgrade. Quote Link to comment Share on other sites More sharing options...
SilverGhost Posted April 9, 2022 Share #2112 Posted April 9, 2022 43 minutes ago, pocopico said: Hi, all extensions have been update and cleaned up for 42661. can not see broadwell-7.1.0-42661 in tynicore. only broadwell-7.1.0-42621 presented. What should i do? Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 9, 2022 Share #2113 Posted April 9, 2022 (edited) 1 hour ago, pocopico said: Hi, all extensions have been update and cleaned up for 42661. Could you also update https://github.com/pocopico/rp-ext/tree/main/redpill-acpid? Ojh as I see also acipid is maintained by @jumkey For VMs also https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json is not ready for 42661 but here @jumkeyhas to update his repo. Edited April 9, 2022 by Dreadnought Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2114 Posted April 9, 2022 50 minutes ago, Dreadnought said: Could you also update https://github.com/pocopico/rp-ext/tree/main/redpill-acpid? Ojh as I see also acipid is maintained by @jumkey For VMs also https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json is not ready for 42661 but here @jumkeyhas to update his repo. I have cloned and merged both Jumkeys and Dogodefi to my redpill-load repo and we are all trying to keep that in shape. Please try https://github.com/pocopico/redpill-load/raw/develop/redpill-virtio/rpext-index.json instead 2 Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2115 Posted April 9, 2022 1 hour ago, SilverGhost said: can not see broadwell-7.1.0-42661 in tynicore. only broadwell-7.1.0-42621 presented. What should i do? ./rploader.sh fullupgrade now Quote Link to comment Share on other sites More sharing options...
SilverGhost Posted April 9, 2022 Share #2116 Posted April 9, 2022 1 minute ago, pocopico said: ./rploader.sh fullupgrade now did that with no effect Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2117 Posted April 9, 2022 3 minutes ago, SilverGhost said: did that with no effect Well try again .. i've just pushed the last changes 1 Quote Link to comment Share on other sites More sharing options...
SilverGhost Posted April 9, 2022 Share #2118 Posted April 9, 2022 5 minutes ago, pocopico said: Well try again .. i've just pushed the last changes worked this time. Thanks! Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted April 9, 2022 Share #2119 Posted April 9, 2022 18 minutes ago, pocopico said: I have cloned and merged both Jumkeys and Dogodefi to my redpill-load repo and we are all trying to keep that in shape. Please try https://github.com/pocopico/redpill-load/raw/develop/redpill-virtio/rpext-index.json instead https://github.com/pocopico/redpill-load/blob/master/redpill-acpid/rpext-index.json point to https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json should that be fixed? Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2120 Posted April 9, 2022 (edited) DS918 -> Update to 42661 and then run the tinycore postuupdate process to 42661 at least has worked on my test system DS1621 -> Loader built for 42661 and then run the DSM install process and i went to 42661 at least has worked on my test system DS3615xs -> Update to 42661 and then run the tinycore postuupdate process to 42661 at least has worked on my test system DS3622 -> Update to 42661 and then run the tinycore postuupdate process to 42661 at least has worked on my test system Waiting reports for other platforms PS At the end of the postupdate process, you can choose whether to overwrite your old custom.gz (where your old extensions are) or not. I suggest to keep you old one if you are happy with your extensions. Edited April 9, 2022 by pocopico 3 Quote Link to comment Share on other sites More sharing options...
aliens Posted April 9, 2022 Share #2121 Posted April 9, 2022 37 minutes ago, pocopico said: ./rploader.sh fullupgrade now Hi all, i have execute new rebuild the image and activate the update : " ./rploader.sh fullupgrade now" but i have some error on disk. This old post for my confuiguration: I try different configuration of "sataportmap" with value: 5,8,18,0,1,2,3,4,512 ecc. but i have all whenever error on disk. Please help me!... you sugest different NAS model of i can use ? my actually confiuration used is "bromolow" Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2122 Posted April 9, 2022 7 minutes ago, aliens said: Hi all, i have execute new rebuild the image and activate the update : " ./rploader.sh fullupgrade now" but i have some error on disk. This old post for my confuiguration: I try different configuration of "sataportmap" with value: 5,8,18,0,1,2,3,4,512 ecc. but i have all whenever error on disk. Please help me!... you sugest different NAS model of i can use ? my actually confiuration used is "bromolow" No the SataPortMap issue will not be resolved in different platform. We can work this offline if you want. PM me Quote Link to comment Share on other sites More sharing options...
wenderfit Posted April 9, 2022 Share #2123 Posted April 9, 2022 (edited) Hi all, I tried to randomly change DiskIdxMap and SataPortMap in 3617xs, 3615xs, but nothing changes. Could you suggest what values I need to write? Скрытый текст tc@box:~$ lsscsi -Hv [0] ahci dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0 [1] ahci dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1 [2] ahci dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2 [3] ahci dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3 [4] ahci dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4 [5] ahci dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata6/host5 [6] usb-storage dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/host6 tc@box:~$ lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 DMI2 [8086:0e00] (rev 04) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 1a [8086:0e02] (rev 04) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 1b [8086:0e03] (rev 04) 00:02.0 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 2a [8086:0e04] (rev 04) 00:03.0 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 3a [8086:0e08] (rev 04) 00:05.0 System peripheral [0880]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 VTd/Memory Map/Misc [8086:0e28] (rev 04) 00:05.2 System peripheral [0880]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IIO RAS [8086:0e2a] (rev 04) 00:05.4 PIC [0800]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IOAPIC [8086:0e2c] (rev 04) 00:11.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port [8086:1d3e] (rev 06) 00:1a.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 [8086:1d2d] (rev 06) 00:1b.0 Audio device [0403]: Intel Corporation C600/X79 series chipset High Definition Audio Controller [8086:1d20] (rev 06) 00:1c.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 [8086:1d10] (rev b6) 00:1c.2 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Root Port 3 [8086:1d14] (rev b6) 00:1d.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 [8086:1d26] (rev 06) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) 00:1f.0 ISA bridge [0601]: Intel Corporation C600/X79 series chipset LPC Controller [8086:1d41] (rev 06) 00:1f.2 SATA controller [0106]: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller [8086:1d02] (rev 06) 00:1f.3 SMBus [0c05]: Intel Corporation C600/X79 series chipset SMBus Host Controller [8086:1d22] (rev 06) 03:00.0 Ethernet controller [0200]: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection [8086:10fb] (rev 01) 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) Edited April 9, 2022 by wenderfit Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 9, 2022 Author Share #2124 Posted April 9, 2022 1 minute ago, wenderfit said: Hi all, I tried to randomly change DiskIdxMap and SataPortMap in 3617xs, 3615xs, but nothing changes, the errors are as follows: disks not found or disk 2 error. Could you suggest what values I need to write? lsscsi -Hv and lspci -nnq (Hide contents) tc@box:~$ lsscsi -Hv [0] ahci dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0 [1] ahci dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1 [2] ahci dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2 [3] ahci dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3 [4] ahci dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4 [5] ahci dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata6/host5 [6] usb-storage dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/host6 tc@box:~$ lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 DMI2 [8086:0e00] (rev 04) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 1a [8086:0e02] (rev 04) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 1b [8086:0e03] (rev 04) 00:02.0 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 2a [8086:0e04] (rev 04) 00:03.0 PCI bridge [0604]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 3a [8086:0e08] (rev 04) 00:05.0 System peripheral [0880]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 VTd/Memory Map/Misc [8086:0e28] (rev 04) 00:05.2 System peripheral [0880]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IIO RAS [8086:0e2a] (rev 04) 00:05.4 PIC [0800]: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IOAPIC [8086:0e2c] (rev 04) 00:11.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port [8086:1d3e] (rev 06) 00:1a.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 [8086:1d2d] (rev 06) 00:1b.0 Audio device [0403]: Intel Corporation C600/X79 series chipset High Definition Audio Controller [8086:1d20] (rev 06) 00:1c.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 [8086:1d10] (rev b6) 00:1c.2 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Root Port 3 [8086:1d14] (rev b6) 00:1d.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 [8086:1d26] (rev 06) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) 00:1f.0 ISA bridge [0601]: Intel Corporation C600/X79 series chipset LPC Controller [8086:1d41] (rev 06) 00:1f.2 SATA controller [0106]: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller [8086:1d02] (rev 06) 00:1f.3 SMBus [0c05]: Intel Corporation C600/X79 series chipset SMBus Host Controller [8086:1d22] (rev 06) 03:00.0 Ethernet controller [0200]: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection [8086:10fb] (rev 01) 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) 00:1f.2 SATA controller [0106]: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller [8086:1d02] (rev 06) I would go for SataPortMap=6 and DiskIdxMap=00 Quote Link to comment Share on other sites More sharing options...
wenderfit Posted April 9, 2022 Share #2125 Posted April 9, 2022 (edited) 31 минуту назад, pocopico сказал: 00:1f.2 SATA controller [0106]: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller [8086:1d02] (rev 06) I would go for SataPortMap=6 and DiskIdxMap=00 Not work: error disc 2,6. Maybe I can find some values on my workstation with jun bootloader? Edited April 9, 2022 by wenderfit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.