TinyCore RedPill Loader (TCRP)

coint_cho · April 6, 2022

There's no apparent error messages, it just straight crashes when I access the web interface with the assigned IP to install the pat file. And the site returns with "Sorry, the page you are looking for is not found."

Edited April 6, 2022 by coint_cho

pocopico · April 6, 2022

2 hours ago, RedwinX said:

Have a little problem, no DHCP at boot. Cannot found the root cause lol. My network seems to be fine, and dhcp work into tinycore. Tried VMXNET3 or e1000e, same result

Can you change mac to a syno one ? Using serialgen ?

pocopico · April 6, 2022

1 hour ago, cferra said:

To be clear - we are not ready for the “final” 7.1 dsm build yet, right?

With the recent new and final release of 7.1 by Syno , i would wait at least a couple of days, as all the required changes take time to implement.

Mainly extensions, redpill, configs etc, testing of TCRP for every platform etc consumes too much time.

If you want to join the effort, drop a PM

irishj · April 6, 2022

Hi All,

I updated to DSM 7.1 RC today and on my primary host, lots of the applications needed to be updated. I could update them all apart from docker, which only showed an uninstall option. Rebooted and still the same. Downloaded the package from Synology site and tried to install it in Chrome and received a message "your login is invalid, please login again". Logged-out and back in again and tried the same and get the same error. Also tried in Firefox and although the error is not thrown, the install process just sits there and doesn't do much.

I uninstall the package, but left the data in-place. I attempted to find it again to re-install in the package center but it's not there !! Rebooted serveral times and still don't see the package. Check a VM running DSM 7.1 RC and can find and install the package fine. Anyone come across this before and know how to resolve it ?

Tried these Docker Packages :

Docker-x64-20.10.3-1305.spk -- DSM 7.1 RC

Docker-x64-20.10.3-1306.spk -- DSM 7.1

pocopico · April 6, 2022

47 minutes ago, coint_cho said:

There's no apparent error messages, it just straight crashes when I access the web interface with the assigned IP to install the pat file. And the site returns with "Sorry, the page you are looking for is not found."

Known issue, you need to add @jumkey redpill.misc extension

coint_cho · April 6, 2022

Just now, pocopico said:

Known issue, you need to add @jumkey redpill.misc extension

Already have added that during compilation phase. Still the same issue.

aliens · April 6, 2022

22 hours ago, pocopico said:

Dont worry, its totally fixable :

please provide the following output from tinycore :

tce-load -iw scsi-5.10.3-tinycore64.tcz
lsscsi -Hv

lspci -nnq

Thanks.

this my result of command:

tc@box:~$ tce-load -iw scsi-5.10.3-tinycore64.tcz
Downloading: scsi-5.10.3-tinycore64.tcz
Connecting to repo.tinycorelinux.net (89.22.99.37:80)
saving to 'scsi-5.10.3-tinycore64.tcz'
scsi-5.10.3-tinycore 100% |********************************| 2632k 0:00:00 ETA
'scsi-5.10.3-tinycore64.tcz' saved
scsi-5.10.3-tinycore64.tcz: OK

tc@box:~$ lsscsi -Hv
[0] ahci
dir: /sys/class/scsi_host//host0
device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0
[1] ahci
dir: /sys/class/scsi_host//host1
device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1
[2] ahci
dir: /sys/class/scsi_host//host2
device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2
[3] ahci
dir: /sys/class/scsi_host//host3
device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3
[4] ahci
dir: /sys/class/scsi_host//host4
device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4
[5] ahci
dir: /sys/class/scsi_host//host5
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata6/host5
[6] ahci
dir: /sys/class/scsi_host//host6
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata7/host6
[7] ahci
dir: /sys/class/scsi_host//host7
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata8/host7
[8] ahci
dir: /sys/class/scsi_host//host8
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata9/host8
[9] ahci
dir: /sys/class/scsi_host//host9
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata10/host9
[10] ahci
dir: /sys/class/scsi_host//host10
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata11/host10
[11] ahci
dir: /sys/class/scsi_host//host11
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata12/host11
[12] ahci
dir: /sys/class/scsi_host//host12
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata13/host12
[13] ahci
dir: /sys/class/scsi_host//host13
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata14/host13
[14] ahci
dir: /sys/class/scsi_host//host14
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata15/host14
[15] ahci
dir: /sys/class/scsi_host//host15
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata16/host15
[16] ahci
dir: /sys/class/scsi_host//host16
device dir: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata17/host16
[17] usb-storage
dir: /sys/class/scsi_host//host17
device dir: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host17

tc@box:~$ lspci -nnq
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
01:00.0 SATA controller [0106]: ASMedia Technology Inc. Device [1b21:0625] (rev 01)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

pocopico · April 6, 2022

22 hours ago, aliens said:

i tried to perform dsm 7 baremetal UEFI on old xpenology 6.0.
I have a problem on installation of DSM, i find the xpenology with "find.synology.com" but after accept eula the system perform HDDS error.
I have tested different combination of "sataportmap"/"diskidxmap" on user_config, but the result is different hdds number error means.
With automap i have:"SataPortMap": "512","DiskIdxMap": "000C".
On mainboard her have 3 port SATA and onather pci with 6 port SATA.
I try:"SataPortMap": "36","DiskIdxMap": "0000" the resuilt is idem.

So based on your input i would go for

SataPortMap": "5" and "DiskIdxMap": "00"

Because you have 5 ports on:

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04)

and 12 ports on :

01:00.0 SATA controller [0106]: ASMedia Technology Inc. Device [1b21:0625] (rev 01)

SataPortMap is a decimal SINGLE digit number and it cannot be set to 12. Its good though that its the second HBA, you can limit the first one to 5 starting on 00 and leave the rest open.

Edited April 6, 2022 by pocopico

cferra · April 6, 2022

1 hour ago, coint_cho said:

There's no apparent error messages, it just straight crashes when I access the web interface with the assigned IP to install the pat file. And the site returns with "Sorry, the page you are looking for is not found."

You’ll have to roll back to 7.0.1 - remove the ssd cache from the volume - then attempt the postupdate process again - ensuring that you add the misc extension and whatever extensions are required for your box.

RedwinX · April 6, 2022

55 minutes ago, pocopico said:

Can you change mac to a syno one ? Using serialgen ?

Already try, same result...

coint_cho · April 6, 2022

24 minutes ago, cferra said:

You’ll have to roll back to 7.0.1 - remove the ssd cache from the volume - then attempt the postupdate process again - ensuring that you add the misc extension and whatever extensions are required for your box.

Correction, I was using ssd emulation to make SHR. SSD Cache wasn't made.

aliens · April 6, 2022

32 minutes ago, pocopico said:

So based on your input i would go for

SataPortMap": "5" and "DiskIdxMap": "00"

Because you have 5 ports on:

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04)

and 12 ports on :

01:00.0 SATA controller [0106]: ASMedia Technology Inc. Device [1b21:0625] (rev 01)

SataPortMap is a decimal SINGLE digit number and it cannot be set to 12. Its good though that its the second HBA, you can limit the first one to 5 starting on 00 and leave the rest open.

new error....

pocopico · April 6, 2022

10 minutes ago, aliens said:

new error....

so why not wider SataPortMap=8 ?

aliens · April 6, 2022

8 minutes ago, pocopico said:

so why not wider SataPortMap=8 ?

😫😫

pocopico · April 6, 2022

Can you try 18?

coint_cho · April 6, 2022

/usr/lib/modules-load.d/70-cpufreq-kernel.conf had the original acpi-cpufreq commented out with #. Tried with both pocopico redpill.misc and jumkey redpill.misc, able to install pat on Proxmox VM, after restarting, still not able to access the setup page in any form or way. At a loss here, and if there's no solution, might just downgrade back to 7.0.1-42218 and stay there

https://streamable.com/1i0xsl

Demo of the current issue I'm facing after installation of PAT.

Edited April 6, 2022 by coint_cho

Dvalin21 · April 6, 2022

This command sequence is the final successful result !!!!
No editing is required, and the original version of the pocopico is used as it is.

./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh clean now

./rploader.sh serialgen DS3622xs+
./rploader.sh identifyusb now
./rploader.sh satamap now

./rploader.sh build broadwellnk-7.0.1-42218
./rploader.sh clean now (This part is important, erase old config.json made in 7.0.1 above.)

./rploader.sh download broadwellnk-7.1.0-42621
./rploader.sh ext broadwellnk-7.1.0-42621 add https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.json
./rploader.sh build broadwellnk-7.1.0-42621

Do you know if the compatibility with extension tg3 with 7.1.0 been fixed?

Sent from my SM-T878U using Tapatalk

RacerX · April 7, 2022

More Testing

I ran thru the DS3622xs+ 7.1 script and it worked fine, only problem it does not find my LSI 9207-8i. I have an ssd and 2 hd connected to it.

It came up with a message "no drives found"

I added the extension https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt2sas/rpext-index.json

The extension ran fine and then I rebooted.

Still get a message no drives found

lspci -v

01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)
        Subsystem: LSI Logic / Symbios Logic 9207-8i SAS2.1 HBA
        Flags: bus master, fast devsel, latency 0, IRQ 11
        I/O ports at f000 [size=256]
        Memory at f7240000 (64-bit, non-prefetchable) [size=64K]
        Memory at f7200000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at f7100000 [disabled] [size=1M]
        Capabilities: <access denied>

Edited April 7, 2022 by RacerX

turbo21psi · April 7, 2022

38 minutes ago, RacerX said:

More Testing

I ran thru the DS3622xs+ 7.1 script and it worked fine, only problem it does not find my LSI 9207-8i. I have an ssd and 2 hd connected to it.

It came up with a message "no drives found"

I added the extension https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt2sas/rpext-index.json

The extension ran fine and then I rebooted.

Still get a message no drives found

lspci -v

01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)
        Subsystem: LSI Logic / Symbios Logic 9207-8i SAS2.1 HBA
        Flags: bus master, fast devsel, latency 0, IRQ 11
        I/O ports at f000 [size=256]
        Memory at f7240000 (64-bit, non-prefetchable) [size=64K]
        Memory at f7200000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at f7100000 [disabled] [size=1M]
        Capabilities: <access denied>

I used this extension https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json

I have a flashed Dell H710 which I believe is the same as yours after the flash.

RacerX · April 7, 2022

A a test tried https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json

It still shows no drives found mesage it was good thought thanks

Edited April 7, 2022 by RacerX

Dvalin21 · April 7, 2022

36 minutes ago, RacerX said:

A a test tried https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json

It still shows no drives found mesage it was good thought thanks

Interesting. What is your satamap and diskid again?

Dvalin21 · April 7, 2022

@pocopico and @Peter Suh

Its it possible to make tc use tg3 anyway? I tried the force_add and it just says that tg3 is already added. Is there a way disable the ext check for a short period of time?

Edited April 7, 2022 by Dvalin21

Peter Suh · April 7, 2022

15 minutes ago, Dvalin21 said:

@pocopico and @Peter Suh

Its it possible to make tc use tg3 anyway? I tried the force_add and it just says that tg3 is already added. Is there a way disable the ext check for a short period of time?

Isn't there a function that prevents ext automatic detection from working in Build Action?
This is a new request and it would be better to make an official request to the issue of Pocopico Github.

Dvalin21 · April 7, 2022

1 minute ago, Peter Suh said:

Isn't there a function that prevents ext automatic detection from working in Build Action?
This is a new request and it would be better to make an official request to the issue of Pocopico Github.

I do dont think there is. Ill have to stick with 7.0.1 until he gets the extension updated.

wimsan · April 7, 2022

does anyone have a DS1621+ working with 7.1?

TinyCore RedPill Loader (TCRP)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation