synoxpe Posted February 28, 2022 Share #1226 Posted February 28, 2022 16 hours ago, synoxpe said: DSM is starting fine but crashes spontaneously after running for some time, which ranges from 4 mins to 9 hours. Sometimes I see the confounded e1000e hardware hang messages on proxmox syslog, sometimes not. But the DSM crash happens inevitably and all I get is an email from DSM (which I’ve configured) warning about an “improper shutdown”. The crash is so frequent sometimes that DSM automatically goes to data scrubbing mode to check data integrity, and the crash happens yet again after sometime. As of now I’ve shut everything down to prevent potential data loss. Any pointers are wholeheartedly welcome!! @Orphée keen to hear if you’ve any tips? Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 28, 2022 Share #1227 Posted February 28, 2022 40 minutes ago, synoxpe said: @Orphée keen to hear if you’ve any tips? Did you enable serial on the Proxmox VM ? qm set vm_id -serial0 socket (vm_id is the VM's number, eg : 101) Then just near "start" button, you should have "console" button. Open it just after the VM starts, and leave it open until the VM crash. The console windows should catch latest lines before crash. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 28, 2022 Share #1228 Posted February 28, 2022 (edited) @maxime To safely use the SataPortMap when installing DSM, cable the HDD to be installed sequentially from port 1, and record the number of SataPortMaps only as many as the number of disks. After the installation of the DSM is completed and the disk station is booted, the actual number of ports 6 may be used. So, in my case, this number is temporarily modified and used only by the actual number of HDDs with e key in the Grub boot menu. Edited February 28, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
synoxpe Posted February 28, 2022 Share #1229 Posted February 28, 2022 3 hours ago, Orphée said: Did you enable serial on the Proxmox VM ? qm set vm_id -serial0 socket (vm_id is the VM's number, eg : 101) Then just near "start" button, you should have "console" button. Open it just after the VM starts, and leave it open until the VM crash. The console windows should catch latest lines before crash. @Orphée I’ve set up the serial socket but the console only shows till “Booting into Linux” and nothing further when the DSM VM boots. Are you referring to something else or this vnc console? Quote Link to comment Share on other sites More sharing options...
babsibo Posted February 28, 2022 Share #1230 Posted February 28, 2022 Hello I have one successfull instalisation but i have one problem. in the firewall of synology i open port 80 and 443 but its always blocked. i can't reach to these port from out of my home network. I open another port like 15247 whatever all are ok can reachable but 80 and 443 can't reach from wan. I can connect to 80 and 443 from lan but now from wan. not about router port forwarding all other ports are ok. already my synology connected by pppoe there is no router between nas and internet. Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 28, 2022 Share #1231 Posted February 28, 2022 58 minutes ago, synoxpe said: @Orphée I’ve set up the serial socket but the console only shows till “Booting into Linux” and nothing further when the DSM VM boots. Are you referring to something else or this vnc console? you are not opening console but probably noVNC Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 28, 2022 Share #1232 Posted February 28, 2022 @synoxpe 1 Quote Link to comment Share on other sites More sharing options...
synoxpe Posted February 28, 2022 Share #1233 Posted February 28, 2022 1 hour ago, Orphée said: @synoxpe Thanks much for sharing the screenshot @Orphée. I’ve never been able to see these logs yet. I always look at the Console tab appearing just above the Hardware menu item on the left menu bar, which is the novnc console. The Console button on the right as you pointed out on the screenshot seems to be the serial port output then? Quote Link to comment Share on other sites More sharing options...
haydibe Posted March 1, 2022 Share #1234 Posted March 1, 2022 11 hours ago, synoxpe said: The Console button on the right as you pointed out on the screenshot seems to be the serial port output then? Unfold the menu by clicking the down-arrow and select xterm.js to see the serial console. 1 Quote Link to comment Share on other sites More sharing options...
AmiroGarry Posted March 1, 2022 Share #1235 Posted March 1, 2022 Thanks for the great bootloader. I use this in a productive system after previous testing. Everything works without problems and much faster. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 1, 2022 Share #1236 Posted March 1, 2022 @pocopico Is it possible to add a feature that when the pat fails to download that the "cache" folder is deleted? It always returns a checksum error because of the failed download. Quote Link to comment Share on other sites More sharing options...
synoxpe Posted March 1, 2022 Share #1237 Posted March 1, 2022 OK so the serial port shows kernel panic before crashing and rebooting @IG-88 @Orphée @haydibe I was running 0.4.4 DS918+ without any glitches since a week back. Then DSM started crashing spontaneously and now I see this: Proxmox env info: proxmox-ve: 7.1-1 (running kernel: 5.13.19-3-pve) pve-manager: 7.1-10 (running version: 7.1-10/6ddebafe) [ 127.643644] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P OE 4.4.180+ #42218 [ 127.644007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 127.644007] task: ffff880179169b80 ti: ffff880179174000 task.ti: ffff880179174000 [ 127.644007] RIP: 0010:[<ffffffff810570a9>] [<ffffffff810570a9>] irq_exit+0x69/0xb0 [ 127.644007] RSP: 0018:ffff88017dd03f90 EFLAGS: 00000046 [ 127.644007] RAX: 0000000000000002 RBX: 0000000000000000 RCX: 00000000000006e0 [ 127.644007] RDX: 000000000000013e RSI: ffff88017dd0ee80 RDI: 000000000917f000 [ 127.644007] RBP: ffff88017dd03f90 R08: 0000013e7f7b1895 R09: 0000000000000000 [ 127.644007] R10: 000000000000000f R11: 0000000000000020 R12: 00000000ffffffff [ 127.644007] R13: ffff880179178000 R14: 0000000000000000 R15: 0000000000000000 [ 127.644007] FS: 0000000000000000(0000) GS:ffff88017dd00000(0000) knlGS:0000000000000000 [ 127.644007] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.644007] CR2: 00007f63a4446798 CR3: 00000000641ff000 CR4: 00000000003606f0 [ 127.644007] Stack: [ 127.644007] ffff88017dd03fa8 ffffffff81035223 0000000000000002 ffff880179177ed0 [ 127.644007] ffffffff8157a9db ffff880179177e08 <EOI> 0000000000000000 0000000000000000 [ 127.644007] ffff880179178000 00000000ffffffff ffff880179177ed0 0000000000000002 [ 127.644007] Call Trace: [ 127.644007] <IRQ> d [<ffffffff81035223>] smp_apic_timer_interrupt+0x43/0x60 [ 127.644007] [<ffffffff8157a9db>] apic_timer_interrupt+0x9b/0xa0 [ 127.644007] <EOI> d [<ffffffff8100e1ad>] ? default_idle+0x2d/0x100 [ 127.644007] [<ffffffff8100efb0>] arch_cpu_idle+0x10/0x20 [ 127.644007] [<ffffffff8108eb68>] default_idle_call+0x28/0x40 [ 127.644007] [<ffffffff8108ed25>] cpu_startup_entry+0x1a5/0x340 [ 127.644007] [<ffffffff810beeb9>] ? clockevents_config_and_register+0x29/0x30 [ 127.644007] [<ffffffff8103336d>] start_secondary+0x10d/0x110 [ 127.644007] Code: 44 48 00 00 48 8b 80 08 c0 ff ff a8 08 75 0e 65 8b 05 bc 64 fb 7e a9 00 ff 1f 00 74 2c e8 60 71 05 00 5d c3 80 3d 23 c6 87 00 00 <74> 2c 65 48 8b 3d 3d 80 fb 7e 48 85 ff 74 b1 48 8b 07 48 85 c0 [ 127.644092] NMI backtrace for cpu 1 [ 127.644092] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P OE 4.4.180+ #42218 [ 127.644092] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 127.644092] task: ffff880179168dc0 ti: ffff880179170000 task.ti: ffff880179170000 [ 127.644092] RIP: 0010:[<ffffffff8100e1ad>] [<ffffffff8100e1ad>] default_idle+0x2d/0x100 [ 127.644092] RSP: 0018:ffff880179173eb8 EFLAGS: 00000246 [ 127.644092] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88017dc912b0 [ 127.644092] RDX: ffffffff8183d438 RSI: 0140000000000000 RDI: 0100000000000000 [ 127.644092] RBP: ffff880179173ed0 R08: 0000000000000002 R09: 7fffffffffffffff [ 127.644092] R10: 00000000fffd5eb8 R11: 0000000000005800 R12: 00000000ffffffff [ 127.644092] R13: ffff880179174000 R14: 0000000000000000 R15: 0000000000000000 [ 127.644092] FS: 0000000000000000(0000) GS:ffff88017dc80000(0000) knlGS:0000000000000000 [ 127.644092] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.644092] CR2: 00007f1813b4dbdb CR3: 0000000078a5e000 CR4: 00000000003606f0 [ 127.644092] Stack: [ 127.644092] ffffffff818d3638 00000000ffffffff ffff880179174000 ffff880179173ee0 [ 127.644092] ffffffff8100efb0 ffff880179173ef0 ffffffff8108eb68 ffff880179173f30 [ 127.644092] ffffffff8108ed25 ffffffff810beeb9 0000000000000001 0000000000000000 [ 127.644092] Call Trace: [ 127.644092] [<ffffffff8100efb0>] arch_cpu_idle+0x10/0x20 [ 127.644092] [<ffffffff8108eb68>] default_idle_call+0x28/0x40 [ 127.644092] [<ffffffff8108ed25>] cpu_startup_entry+0x1a5/0x340 [ 127.644092] [<ffffffff810beeb9>] ? clockevents_config_and_register+0x29/0x30 [ 127.644092] [<ffffffff8103336d>] start_secondary+0x10d/0x110 [ 127.644092] Code: 89 e5 41 55 41 54 53 65 8b 1d 80 ef ff 7e 8b 05 52 d1 8b 00 85 c0 7f 2b 8b 05 88 e9 9b 00 85 c0 7e 07 0f 00 2d 67 58 5f 00 fb f4 <65> 8b 1d 5c ef ff 7e 8b 05 2e d1 8b 00 85 c0 7f 5c 5b 41 5c 41 [ 127.644106] NMI backtrace for cpu 3 [ 127.644106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: P OE 4.4.180+ #42218 [ 127.644106] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 127.644106] task: ffff88017916a940 ti: ffff880179178000 task.ti: ffff880179178000 [ 127.644106] RIP: 0010:[<ffffffff8100e1ad>] [<ffffffff8100e1ad>] default_idle+0x2d/0x100 [ 127.644106] RSP: 0018:ffff88017917beb8 EFLAGS: 00000246 [ 127.644106] RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffff88017dd912b0 [ 127.644106] RDX: ffffffff8183d438 RSI: 0140000000000000 RDI: 0100000000000000 [ 127.644106] RBP: ffff88017917bed0 R08: 0000000000000002 R09: 0000000000000000 [ 127.644106] R10: 00000000fffd5e2b R11: 000000000000b800 R12: 00000000ffffffff [ 127.644106] R13: ffff88017917c000 R14: 0000000000000000 R15: 0000000000000000 [ 127.644106] FS: 0000000000000000(0000) GS:ffff88017dd80000(0000) knlGS:0000000000000000 [ 127.644106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.644106] CR2: 00007feec4003000 CR3: 000000015f1ea000 CR4: 00000000003606f0 [ 127.644106] Stack: [ 127.644106] ffffffff818d3638 00000000ffffffff ffff88017917c000 ffff88017917bee0 [ 127.644106] ffffffff8100efb0 ffff88017917bef0 ffffffff8108eb68 ffff88017917bf30 [ 127.644106] ffffffff8108ed25 ffffffff810beeb9 0000000000000003 0000000000000000 [ 127.644106] Call Trace: [ 127.644106] [<ffffffff8100efb0>] arch_cpu_idle+0x10/0x20 [ 127.644106] [<ffffffff8108eb68>] default_idle_call+0x28/0x40 [ 127.644106] [<ffffffff8108ed25>] cpu_startup_entry+0x1a5/0x340 [ 127.644106] [<ffffffff810beeb9>] ? clockevents_config_and_register+0x29/0x30 [ 127.644106] [<ffffffff8103336d>] start_secondary+0x10d/0x110 [ 127.644106] Code: 89 e5 41 55 41 54 53 65 8b 1d 80 ef ff 7e 8b 05 52 d1 8b 00 85 c0 7f 2b 8b 05 88 e9 9b 00 85 c0 7e 07 0f 00 2d 67 58 5f 00 fb f4 <65> 8b 1d 5c ef ff 7e 8b 05 2e d1 8b 00 85 c0 7f 5c 5b 41 5c 41 [ 127.643001] NMI watchdog: Watchdog detected hard LOCKUP on cpu 0dModules linked in: fuse 8021q vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_user(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) vfat fat udf isofs loop synoacl_vfs(PO) tun nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 raid456 nf_conntrack async_raid6_recov async_memcpy iptable_filter async_pq async_xor async_tx ip_tables x_tables nfsd btrfs ecryptfs zstd_decompress zstd_compress xxhash xor raid6_pq lockd grace rpcsec_gss_krb5 auth_rpcgss sunrpc aesni_intel glue_helper lrw gf128mul ablk_helper apollolake_synobios(PO) hid_generic usbhid hid usblp i915 drm_kms_helper syscopyarea sysfillrect sysim[ 127.643001] CPU: 0 PID: 16355 Comm: transmissiond Tainted: P OE 4.4.180+ #42218 [ 127.643001] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 127.643001] task: ffff8801616f44c0 ti: ffff880063568000 task.ti: ffff880063568000 [ 127.643001] RIP: 0033:[<00007f63b310b2eb>] [<00007f63b310b2eb>] 0x7f63b310b2eb [ 127.643001] RSP: 002b:00007f63a9d513d0 EFLAGS: 00000293 [ 127.643001] RAX: 0000000000000000 RBX: 00007f63a9d51420 RCX: 00007f63b310b2eb [ 127.643001] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00007f63a9d51420 [ 127.643001] RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffc3ffe7080 [ 127.643001] R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000003e [ 127.643001] R13: 00000000ffffffff R14: 00000000ffffffff R15: 00007f63a9d515a0 [ 127.643001] FS: 00007f63a9d52700(0000) GS:ffff88017dc00000(0000) knlGS:0000000000000000 [ 127.643001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.643001] CR2: 00007f639cb3d628 CR3: 00000000641ff000 CR4: 00000000003606f0 [ 127.643001] [ 127.643001] Sending NMI to other CPUs: [ 127.643001] Kernel panic - not syncing: Hard LOCKUP [ 127.643001] CPU: 0 PID: 16355 Comm: transmissiond Tainted: P OE 4.4.180+ #42218 [ 127.643001] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 127.643001] 0000000000000000 ffff88006356bb88 ffffffff812ef89d ffffffff81718e33 [ 127.643001] ffff88006356bc18 ffff88006356bc08 ffffffff8112ffc7 0000000000000008 [ 127.643001] ffff88006356bc18 ffff88006356bbb0 ffffffff81304298 0000000000000008 [ 127.643001] Call Trace: [ 127.643001] [<ffffffff812ef89d>] dump_stack+0x4d/0x70 [ 127.643001] [<ffffffff8112ffc7>] panic+0xc5/0x21d [ 127.643001] [<ffffffff81304298>] ? find_next_bit+0x18/0x20 [ 127.643001] [<ffffffff810e4783>] watchdog_overflow_callback+0xe3/0xf0 [ 127.643001] [<ffffffff81129c98>] __perf_event_overflow+0x98/0x1e0 [ 127.643001] [<ffffffff8112a844>] perf_event_overflow+0x14/0x20 [ 127.643001] [<ffffffff8101f97c>] intel_pmu_handle_irq+0x1ec/0x410 [ 127.643001] [<ffffffff811a8110>] ? poll_select_copy_remaining+0x120/0x120 [ 127.643001] [<ffffffff811a7fe1>] ? set_fd_set+0x21/0x30 [ 127.643001] [<ffffffff811a8cd1>] ? core_sys_select+0x291/0x2c0 [ 127.643001] [<ffffffff81017c5d>] perf_event_nmi_handler+0x2d/0x50 [ 127.643001] [<ffffffff81008a38>] nmi_handle+0x58/0x120 [ 127.643001] [<ffffffff81008fd5>] default_do_nmi+0x45/0xe0 [ 127.643001] [<ffffffff81009170>] do_nmi+0x100/0x160 [ 127.643001] [<ffffffff8157bd18>] nmi+0x68/0xb8 [ 127.643001] Kernel Offset: disabled Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 1, 2022 Share #1238 Posted March 1, 2022 @pocopico FYI, started to get this error and Im not adding the extension that its referring to [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/thethorgroup.jg.boot-wait.json). For more info use "ext-manager.sh info thethorgroup.jg.boot-wait" *** Process will exit *** [!] Failed to install jg.bootwait bundled extension - see errors above *** Process will exit *** Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted March 1, 2022 Share #1239 Posted March 1, 2022 (edited) Trying to build a DS920 Loader I don't see Geminilake platform version. I'm using redpill Tinycore ver 4.5.2 Which platform do I use apllolake ? nope that didn't work.... guess I'll wait till they add it... Edited March 1, 2022 by painkiller895 1 Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted March 2, 2022 Share #1240 Posted March 2, 2022 Hi all well im still battling with this sata issue i went and got myself another motherboard and cpu while i can get dsm 7 running now the sata is messed up i have then gone and installed 6.2.3 to see if it brings them up right and still messed up it also doesnt see my m.2 on my motherboard i ran lsmod in 6.2.3 to see what the results where this is what i got also bios sees the 2 x m.2 installed, Module Size Used by cifs 368749 0 udf 79080 0 isofs 32127 0 loop 16655 0 tcm_loop 12548 1 iscsi_target_mod 233791 1 target_core_ep 44486 2 target_core_multi_file 26437 1 target_core_file 42286 1 target_core_iblock 19633 1 target_core_mod 929034 18 target_core_iblock,target_core_multi_file,iscsi _target_mod,target_core_ep,target_core_file,tcm_loop syno_extent_pool 1292783 0 rodsp_ep 74371 3 target_core_multi_file,syno_extent_pool,target_c ore_file hid_generic 1121 0 usbhid 25287 0 hid 82284 2 hid_generic,usbhid usblp 10482 0 broadwell_synobios 69726 0 button 4448 0 ax88179_178a 12084 0 usbnet 17789 1 ax88179_178a tg3 149448 0 r8169 54443 0 cnic 52863 0 bnx2 73705 0 vmxnet3 36813 0 pcnet32 30594 0 e1000 99771 0 sfc 154635 0 netxen_nic 96724 0 qlge 77298 0 qlcnic 227480 0 qla3xxx 36553 0 pch_gbe 33339 0 ptp_pch 5654 1 pch_gbe sky2 46998 0 skge 29475 0 jme 34113 0 ipg 15845 0 uio 7600 1 cnic alx 26009 0 atl1c 34196 0 atl1e 27964 0 atl1 30574 0 libphy 18069 1 tg3 mii 3771 8 ipg,jme,atl1,r8169,usbnet,pch_gbe,pcnet32,ax8817 9_178a exfat 116630 0 btrfs 913485 0 synoacl_vfs 17190 3 zlib_deflate 20444 1 btrfs hfsplus 91458 0 md4 3561 0 hmac 2697 0 bnx2x 1417632 0 libcrc32c 906 1 bnx2x mdio 3301 3 alx,sfc,bnx2x mlx5_core 491059 0 mlx4_en 110920 0 mlx4_core 287615 1 mlx4_en mlx_compat 6312 3 mlx4_en,mlx4_core,mlx5_core compat 4337 4 mlx_compat,mlx4_en,mlx4_core,mlx5_core qede 114874 0 qed 795951 1 qede atlantic 62992 0 r8168 512115 0 tn40xx 30625 0 i40e 288789 0 ixgbe 264060 0 be2net 116581 0 igb 175225 0 i2c_algo_bit 5128 1 sfc e1000e 169025 0 dca 4512 2 igb,ixgbe vxlan 15824 0 fuse 76026 0 vfat 10151 1 fat 50511 1 vfat crc32c_intel 13865 2 aesni_intel 43621 0 glue_helper 4001 1 aesni_intel lrw 3277 1 aesni_intel gf128mul 5346 1 lrw ablk_helper 1684 1 aesni_intel arc4 1840 0 cryptd 6964 2 aesni_intel,ablk_helper ecryptfs 79019 1 btrfs sha256_generic 9628 0 sha1_generic 2206 0 ecb 1849 0 aes_x86_64 7303 1 aesni_intel authenc 6180 0 des_generic 15851 0 ansi_cprng 3740 0 cts 3936 0 md5 2249 0 cbc 2512 0 cpufreq_conservative 6240 0 cpufreq_powersave 926 0 cpufreq_performance 930 8 cpufreq_ondemand 8021 0 acpi_cpufreq 6622 0 mperf 1075 1 acpi_cpufreq processor 26084 9 acpi_cpufreq thermal_sys 17649 1 processor cpufreq_stats 2857 0 freq_table 2380 3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq dm_snapshot 26058 0 crc_itu_t 1267 1 udf crc_ccitt 1267 0 quota_v2 3719 6 quota_tree 7458 1 quota_v2 psnap 1653 0 p8022 979 0 llc 3505 2 p8022,psnap sit 14490 0 tunnel4 2061 1 sit ip_tunnel 11456 2 sit,vxlan ipv6 302657 61 sit,cnic,rodsp_ep zram 7889 4 sg 25382 0 etxhci_hcd 84786 0 mpt3sas 301861 0 mpt2sas 239426 0 megaraid_sas 72750 0 mptctl 26109 0 mptsas 38535 0 mptspi 12988 0 mptscsih 18713 2 mptsas,mptspi mptbase 61898 4 mptctl,mptsas,mptspi,mptscsih scsi_transport_spi 19106 1 mptspi megaraid 37874 0 megaraid_mbox 27755 0 megaraid_mm 7568 1 megaraid_mbox vmw_pvscsi 15303 0 BusLogic 21185 0 usb_storage 47773 1 xhci_hcd 84132 0 uhci_hcd 22427 0 ohci_hcd 20752 0 ehci_pci 3568 0 ehci_hcd 39460 1 ehci_pci usbcore 175630 13 etxhci_hcd,usblp,uhci_hcd,usb_storage,ohci_hcd, ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd usb_common 1552 1 usbcore mv14xx 540541 0 cepsw 17708 0 I am running Gigabyte GA-Z170X-Gaming 7 Motherboard & Intel i7-6700K CPU motherboard has 2 x m.2 slots and 8 x sata ports and 3 x SATA Express connectors please if anyone could help me fix this would be appreciated thankyou Quote Link to comment Share on other sites More sharing options...
vbz14216 Posted March 2, 2022 Share #1241 Posted March 2, 2022 (edited) There's a new small DSM update for 7.0.1-42218, Update 3. I just reinstalled DSM on my J1900I-C test system(baremetal) paired with TC v0.4.5 on DS918+ loader(apollolake-7.0.1-42218), result seems to be SUCCESSFUL which updated itself to Update 3 after initial pat install. Also my ancient D510 system(baremetal) works fine(bromolow-7.0.1-42218). Weirdly enough TC loads into desktop without problems on J1900's HD Graphics(Gen 7, device id 8086-0F31) now Edited March 2, 2022 by vbz14216 fix error Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted March 2, 2022 Share #1242 Posted March 2, 2022 2 hours ago, gazzac72 said: Hi all well im still battling with this sata issue i went and got myself another motherboard and cpu while i can get dsm 7 running now the sata is messed up i have then gone and installed 6.2.3 to see if it brings them up right and still messed up it also doesnt see my m.2 on my motherboard i ran lsmod in 6.2.3 to see what the results where this is what i got also bios sees the 2 x m.2 installed, Module Size Used by cifs 368749 0 udf 79080 0 isofs 32127 0 loop 16655 0 tcm_loop 12548 1 iscsi_target_mod 233791 1 target_core_ep 44486 2 target_core_multi_file 26437 1 target_core_file 42286 1 target_core_iblock 19633 1 target_core_mod 929034 18 target_core_iblock,target_core_multi_file,iscsi _target_mod,target_core_ep,target_core_file,tcm_loop syno_extent_pool 1292783 0 rodsp_ep 74371 3 target_core_multi_file,syno_extent_pool,target_c ore_file hid_generic 1121 0 usbhid 25287 0 hid 82284 2 hid_generic,usbhid usblp 10482 0 broadwell_synobios 69726 0 button 4448 0 ax88179_178a 12084 0 usbnet 17789 1 ax88179_178a tg3 149448 0 r8169 54443 0 cnic 52863 0 bnx2 73705 0 vmxnet3 36813 0 pcnet32 30594 0 e1000 99771 0 sfc 154635 0 netxen_nic 96724 0 qlge 77298 0 qlcnic 227480 0 qla3xxx 36553 0 pch_gbe 33339 0 ptp_pch 5654 1 pch_gbe sky2 46998 0 skge 29475 0 jme 34113 0 ipg 15845 0 uio 7600 1 cnic alx 26009 0 atl1c 34196 0 atl1e 27964 0 atl1 30574 0 libphy 18069 1 tg3 mii 3771 8 ipg,jme,atl1,r8169,usbnet,pch_gbe,pcnet32,ax8817 9_178a exfat 116630 0 btrfs 913485 0 synoacl_vfs 17190 3 zlib_deflate 20444 1 btrfs hfsplus 91458 0 md4 3561 0 hmac 2697 0 bnx2x 1417632 0 libcrc32c 906 1 bnx2x mdio 3301 3 alx,sfc,bnx2x mlx5_core 491059 0 mlx4_en 110920 0 mlx4_core 287615 1 mlx4_en mlx_compat 6312 3 mlx4_en,mlx4_core,mlx5_core compat 4337 4 mlx_compat,mlx4_en,mlx4_core,mlx5_core qede 114874 0 qed 795951 1 qede atlantic 62992 0 r8168 512115 0 tn40xx 30625 0 i40e 288789 0 ixgbe 264060 0 be2net 116581 0 igb 175225 0 i2c_algo_bit 5128 1 sfc e1000e 169025 0 dca 4512 2 igb,ixgbe vxlan 15824 0 fuse 76026 0 vfat 10151 1 fat 50511 1 vfat crc32c_intel 13865 2 aesni_intel 43621 0 glue_helper 4001 1 aesni_intel lrw 3277 1 aesni_intel gf128mul 5346 1 lrw ablk_helper 1684 1 aesni_intel arc4 1840 0 cryptd 6964 2 aesni_intel,ablk_helper ecryptfs 79019 1 btrfs sha256_generic 9628 0 sha1_generic 2206 0 ecb 1849 0 aes_x86_64 7303 1 aesni_intel authenc 6180 0 des_generic 15851 0 ansi_cprng 3740 0 cts 3936 0 md5 2249 0 cbc 2512 0 cpufreq_conservative 6240 0 cpufreq_powersave 926 0 cpufreq_performance 930 8 cpufreq_ondemand 8021 0 acpi_cpufreq 6622 0 mperf 1075 1 acpi_cpufreq processor 26084 9 acpi_cpufreq thermal_sys 17649 1 processor cpufreq_stats 2857 0 freq_table 2380 3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq dm_snapshot 26058 0 crc_itu_t 1267 1 udf crc_ccitt 1267 0 quota_v2 3719 6 quota_tree 7458 1 quota_v2 psnap 1653 0 p8022 979 0 llc 3505 2 p8022,psnap sit 14490 0 tunnel4 2061 1 sit ip_tunnel 11456 2 sit,vxlan ipv6 302657 61 sit,cnic,rodsp_ep zram 7889 4 sg 25382 0 etxhci_hcd 84786 0 mpt3sas 301861 0 mpt2sas 239426 0 megaraid_sas 72750 0 mptctl 26109 0 mptsas 38535 0 mptspi 12988 0 mptscsih 18713 2 mptsas,mptspi mptbase 61898 4 mptctl,mptsas,mptspi,mptscsih scsi_transport_spi 19106 1 mptspi megaraid 37874 0 megaraid_mbox 27755 0 megaraid_mm 7568 1 megaraid_mbox vmw_pvscsi 15303 0 BusLogic 21185 0 usb_storage 47773 1 xhci_hcd 84132 0 uhci_hcd 22427 0 ohci_hcd 20752 0 ehci_pci 3568 0 ehci_hcd 39460 1 ehci_pci usbcore 175630 13 etxhci_hcd,usblp,uhci_hcd,usb_storage,ohci_hcd, ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd usb_common 1552 1 usbcore mv14xx 540541 0 cepsw 17708 0 I am running Gigabyte GA-Z170X-Gaming 7 Motherboard & Intel i7-6700K CPU motherboard has 2 x m.2 slots and 8 x sata ports and 3 x SATA Express connectors please if anyone could help me fix this would be appreciated thankyou Also noticed this when doing sataport now tc@box:~$ sudo ./rploader.sh satamap now HBA: 00:17.0 Disks : 6 HBA: 00:1b.3 Disks : 2 ls: cannot access '/sys/devices/pci0000:00/0000:00:1d.0/0000:40:00.0/port*': No such file or directory HBA: 00:1d.0 Disks : 0 ls: cannot access '/sys/devices/pci0000:00/0000:00:1d.0/0000:40:00.0/port*': No such file or directory SataPortMap=620 DiskIdxMap=000203 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 2, 2022 Share #1243 Posted March 2, 2022 Hi all well im still battling with this sata issue i went and got myself another motherboard and cpu while i can get dsm 7 running now the sata is messed up i have then gone and installed 6.2.3 to see if it brings them up right and still messed up it also doesnt see my m.2 on my motherboard i ran lsmod in 6.2.3 to see what the results where this is what i got also bios sees the 2 x m.2 installed, Module Size Used by cifs 368749 0 udf 79080 0 isofs 32127 0 loop 16655 0 tcm_loop 12548 1 iscsi_target_mod 233791 1 target_core_ep 44486 2 target_core_multi_file 26437 1 target_core_file 42286 1 target_core_iblock 19633 1 target_core_mod 929034 18 target_core_iblock,target_core_multi_file,iscsi _target_mod,target_core_ep,target_core_file,tcm_loop syno_extent_pool 1292783 0 rodsp_ep 74371 3 target_core_multi_file,syno_extent_pool,target_c ore_file hid_generic 1121 0 usbhid 25287 0 hid 82284 2 hid_generic,usbhid usblp 10482 0 broadwell_synobios 69726 0 button 4448 0 ax88179_178a 12084 0 usbnet 17789 1 ax88179_178a tg3 149448 0 r8169 54443 0 cnic 52863 0 bnx2 73705 0 vmxnet3 36813 0 pcnet32 30594 0 e1000 99771 0 sfc 154635 0 netxen_nic 96724 0 qlge 77298 0 qlcnic 227480 0 qla3xxx 36553 0 pch_gbe 33339 0 ptp_pch 5654 1 pch_gbe sky2 46998 0 skge 29475 0 jme 34113 0 ipg 15845 0 uio 7600 1 cnic alx 26009 0 atl1c 34196 0 atl1e 27964 0 atl1 30574 0 libphy 18069 1 tg3 mii 3771 8 ipg,jme,atl1,r8169,usbnet,pch_gbe,pcnet32,ax8817 9_178a exfat 116630 0 btrfs 913485 0 synoacl_vfs 17190 3 zlib_deflate 20444 1 btrfs hfsplus 91458 0 md4 3561 0 hmac 2697 0 bnx2x 1417632 0 libcrc32c 906 1 bnx2x mdio 3301 3 alx,sfc,bnx2x mlx5_core 491059 0 mlx4_en 110920 0 mlx4_core 287615 1 mlx4_en mlx_compat 6312 3 mlx4_en,mlx4_core,mlx5_core compat 4337 4 mlx_compat,mlx4_en,mlx4_core,mlx5_core qede 114874 0 qed 795951 1 qede atlantic 62992 0 r8168 512115 0 tn40xx 30625 0 i40e 288789 0 ixgbe 264060 0 be2net 116581 0 igb 175225 0 i2c_algo_bit 5128 1 sfc e1000e 169025 0 dca 4512 2 igb,ixgbe vxlan 15824 0 fuse 76026 0 vfat 10151 1 fat 50511 1 vfat crc32c_intel 13865 2 aesni_intel 43621 0 glue_helper 4001 1 aesni_intel lrw 3277 1 aesni_intel gf128mul 5346 1 lrw ablk_helper 1684 1 aesni_intel arc4 1840 0 cryptd 6964 2 aesni_intel,ablk_helper ecryptfs 79019 1 btrfs sha256_generic 9628 0 sha1_generic 2206 0 ecb 1849 0 aes_x86_64 7303 1 aesni_intel authenc 6180 0 des_generic 15851 0 ansi_cprng 3740 0 cts 3936 0 md5 2249 0 cbc 2512 0 cpufreq_conservative 6240 0 cpufreq_powersave 926 0 cpufreq_performance 930 8 cpufreq_ondemand 8021 0 acpi_cpufreq 6622 0 mperf 1075 1 acpi_cpufreq processor 26084 9 acpi_cpufreq thermal_sys 17649 1 processor cpufreq_stats 2857 0 freq_table 2380 3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq dm_snapshot 26058 0 crc_itu_t 1267 1 udf crc_ccitt 1267 0 quota_v2 3719 6 quota_tree 7458 1 quota_v2 psnap 1653 0 p8022 979 0 llc 3505 2 p8022,psnap sit 14490 0 tunnel4 2061 1 sit ip_tunnel 11456 2 sit,vxlan ipv6 302657 61 sit,cnic,rodsp_ep zram 7889 4 sg 25382 0 etxhci_hcd 84786 0 mpt3sas 301861 0 mpt2sas 239426 0 megaraid_sas 72750 0 mptctl 26109 0 mptsas 38535 0 mptspi 12988 0 mptscsih 18713 2 mptsas,mptspi mptbase 61898 4 mptctl,mptsas,mptspi,mptscsih scsi_transport_spi 19106 1 mptspi megaraid 37874 0 megaraid_mbox 27755 0 megaraid_mm 7568 1 megaraid_mbox vmw_pvscsi 15303 0 BusLogic 21185 0 usb_storage 47773 1 xhci_hcd 84132 0 uhci_hcd 22427 0 ohci_hcd 20752 0 ehci_pci 3568 0 ehci_hcd 39460 1 ehci_pci usbcore 175630 13 etxhci_hcd,usblp,uhci_hcd,usb_storage,ohci_hcd, ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd usb_common 1552 1 usbcore mv14xx 540541 0 cepsw 17708 0 I am running Gigabyte GA-Z170X-Gaming 7 Motherboard & Intel i7-6700K CPU motherboard has 2 x m.2 slots and 8 x sata ports and 3 x SATA Express connectors please if anyone could help me fix this would be appreciated thankyou Try using megaraid ext do you would use sudo ./rploader.sh ext whateverplatform add https://raw.githubusercontent.com/pocopico/rp-ext/main/megaraid_sas/rpext-index.json and hit enterUpdate: Try the default sata setting Satamap 58Diskidxmap 0A00Sent from my SM-T878U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Kaneske Posted March 2, 2022 Share #1244 Posted March 2, 2022 Anyone updated a running instance of 7.0.1-42218-2 to new Version 7.0.1-42218-3 using the internal update process while running the System? Thou outcome of this would be nice to know… 1 Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted March 2, 2022 Share #1245 Posted March 2, 2022 I have updated the virtual "test" machine (Proxmox - DS3617xs) from 7.0.1-42218-2 to 7.0.1-42218-3 and it works. Don't need to make a new loader. Quote Link to comment Share on other sites More sharing options...
altas Posted March 2, 2022 Share #1246 Posted March 2, 2022 (edited) the outcome is a bricked xpenologgy installation my baremetal was after that in a repair loop Edited March 2, 2022 by altas Quote Link to comment Share on other sites More sharing options...
yaleforks Posted March 2, 2022 Share #1247 Posted March 2, 2022 I dont know if this is possible but I would like my 918+ redpill installation to show 12 drive slots instead of the normal 4, I have 11 drives populated and everything is working fine. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 2, 2022 Share #1248 Posted March 2, 2022 2 hours ago, dodo-dk said: I have updated the virtual "test" machine (Proxmox - DS3617xs) from 7.0.1-42218-2 to 7.0.1-42218-3 and it works. Don't need to make a new loader. Was there any special procedure you went through? No internet while install etc.. Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted March 2, 2022 Share #1249 Posted March 2, 2022 No, i have downloaded the 7.0.1-42218-3 pat and do a manual update over the dsm webgui. After update the vm restarts an all done. Now I have update the "productive" vm system too with same result. Quote Link to comment Share on other sites More sharing options...
gazzac72 Posted March 2, 2022 Share #1250 Posted March 2, 2022 1 hour ago, Dvalin21 said: Try using megaraid ext do you would use sudo ./rploader.sh ext whateverplatform add https://raw.githubusercontent.com/pocopico/rp-ext/main/megaraid_sas/rpext-index.json and hit enter Update: Try the default sata setting Satamap 58 Diskidxmap 0A00 Sent from my SM-T878U using Tapatalk thankyou tried but now wont connect to internet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.