MB7_30 Posted January 12, 2022 Share #176 Posted January 12, 2022 Hi, Install completed on ACER M5910. Little trick to make the command work ./rploader.sh identifyusb now sed: -e expression #1, char 33: invalid usage of line address 0 sed: -e expression #1, char 33: invalid usage of line address 0 And the problem of corrupted .Pat on the installation Despite the updates, I can't identify my USB key. The problem is that the PC has SD card readers that simulate empty hard drives. After unplugging these readers (unplugging the map on the MB), the command went through as well as the installation. Good job 😃 Quote Link to comment Share on other sites More sharing options...
jarugut Posted January 12, 2022 Share #177 Posted January 12, 2022 1 hour ago, jarugut said: let me try again to recreate the bootloader, I've recreated I think with the same user_config.json because I used the backup option but let me check it and try again. Thank you Hi Pocopico, I don't know what could be the problem because I have not serial port on the Qnap, but I cannot install the apollake 6.2.4u3 on the system, it always keep on recovery bucle 1. I've installed from the scratch the dsm 6.2.4 2. I've installed the update3. 3. burn from the scratch the tinycore usb 4. upload the user_config with the original configuration pid, vid, sn and mac 5. regenerate the loader and reboot 6 the dsm keeps always in recovery mode ... Quote Link to comment Share on other sites More sharing options...
Invaliduser Posted January 12, 2022 Share #178 Posted January 12, 2022 1 hour ago, pocopico said: you need to edit manually redpill-load/include/runtime.sh And comment the line by adding a # in front of the line. #[dpkg]="dpkg --version" # extract flashupdate That did it! Thanks pocopico. Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 12, 2022 Author Share #179 Posted January 12, 2022 46 minutes ago, jarugut said: Hi Pocopico, I don't know what could be the problem because I have not serial port on the Qnap, but I cannot install the apollake 6.2.4u3 on the system, it always keep on recovery bucle 1. I've installed from the scratch the dsm 6.2.4 2. I've installed the update3. 3. burn from the scratch the tinycore usb 4. upload the user_config with the original configuration pid, vid, sn and mac 5. regenerate the loader and reboot 6 the dsm keeps always in recovery mode ... There might be an extension failing to load correctly. Do you have a list of the installed extensions? Quote Link to comment Share on other sites More sharing options...
rok1 Posted January 13, 2022 Share #180 Posted January 13, 2022 6 hours ago, Invaliduser said: That did it! Thanks pocopico. How did you get it to work? I built a 3617 image and it's nothing more than a install loop 1 Quote Link to comment Share on other sites More sharing options...
tester Posted January 13, 2022 Share #181 Posted January 13, 2022 (edited) 12 hours ago, Kaneske said: @pocopicoforgive me if I´m not that firm in Shell... Starting this, ends in Terminal in my IPMI or ESXI... tc@box$: There is no GUI, what am I doing wrong. Read your Instructions ten times...tried to: passwd tc "old Password:"... I don't know. Cannot get this startet, sorry for asking maybe basics How did you use or convert the VMDK? I had the same when using vmkfstools to convert, it did only boot to shell and no files in Home. I used to convert a VMware Workstation VM with DSM v7 bromolow with OVFtool and imported that (build on esxi always corrupted grub, too), see here: If you find out how to build on ESXi-VM let me know. Currently I try to install a 6.2.4 VM, but I am stuck in a Setup loop ... UPDATE: I don't now if that fixed the boot loop, but after I added 2 Serial Ports (output to file) to my VMware Workstation 16 VM or because I booted from an ISO and then bootet local (it seems to be the 2 Serial Ports, I imported the VM in ESXi 6.7 and it booted to Setup again without Serial Ports, added them and then all worked OK), it started to boot into the DSM User Setup and then successfully into DSM 6.2.4 (with VMXNET3 10GBit and custom MAC) ! UPDATE Gen8: As I couldn't edit my older post, I think I found the correct module for the OnbOard NIC (BCM5720, ntg3, Tigon 3) for the Gen8 ... don't know why it wasn't automatically picked up when I tried last time as it is already there: https://github.com/pocopico/rp-ext/tree/main/tg3 Will have to check at a later time again. Edited January 13, 2022 by tester Quote Link to comment Share on other sites More sharing options...
Franks4fingers Posted January 13, 2022 Share #182 Posted January 13, 2022 Curious if anyone can provide some guidance if this is possible: Currently running 6.2.3-25426 Update 3 via Jun's loader on baremetal. I would like to get to V7 but would like to try and do that by converting to Proxmox in ther process. I have a second PC that is identical in terms of mobo / processor that I could use if required as part of this conversion (assuming it's possible of course). The eventual aim is to have this virtual instance running on the original source system because that is running in a tower case (the target I could use is a SFF PC which can't run all the HDD's). Or is there a way to be able to convert the existing source system running 6.2.3-25426 to Proxmox without needing to use the spare PC I have? Any ideas would be appreciated. Quote Link to comment Share on other sites More sharing options...
jarugut Posted January 13, 2022 Share #183 Posted January 13, 2022 9 hours ago, pocopico said: There might be an extension failing to load correctly. Do you have a list of the installed extensions? It looks that you will need the following modules : Found VGA Controller : pciid 8086d000022b1 Required Extension : i915 Searching for matching extension for i915 Found SATA Controller : pciid 8086d000022a3 Required Extension : ahci Searching for matching extension for ahci Found SATA Controller : pciid 1b4bd00009215 Required Extension : No matching extension Found SATA Controller : pciid 1b4bd00009215 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.igb ========================================== [#] Extension name: igb [#] Description: Adds Intel(R) Gigabit Ethernet Linux Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/igb [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb" *** Process will exit *** Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb" *** Process will exit *** Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb" *** Process will exit *** Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" ------------------------------------------------------------------------------------------------ Starting loader creation Checking user_config.json : Done Cache directory OK [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [OK] [#] ========================================== thethorgroup.boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json [#] Platforms supported: ds918p_41890 ds918p_25556 ds3615xs_41222 ds3615xs_25556 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [OK] [#] ========================================== thethorgroup.virtio ========================================== [#] Extension name: VirtIO [#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar) [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio [#] Software author: https://www.linux-kvm.org/page/Virtio [#] Update URL: https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json [#] Platforms supported: ds918p_41890 ds918p_25556 ds3615xs_41222 ds3615xs_25556 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating pocopico.igb extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [#] Extension pocopico.igb index is already up to date [#] Updating thethorgroup.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [#] Extension thethorgroup.boot-wait index is already up to date [#] Updating thethorgroup.virtio extension... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [#] Extension thethorgroup.virtio index is already up to date [#] Updating thethorgroup.virtio extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds918p_25556 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/ds918p_25556.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ###################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.igb platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/igb-4.4.59plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/igb-4.4.59plus.tgz ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/igb-4.4.59plus.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/igb-4.4.59plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/src/check-igb.sh to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/check-igb.sh ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/check-igb.sh file... [OK] [#] Successfully processed recipe for extension pocopico.igb platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ###################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.boot-wait platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds918p_25556/boot-wait.sh ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds918p_25556/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension thethorgroup.boot-wait platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/recipes/ds918p_25556.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ###################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.virtio platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/src/check-virtio.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/check-virtio.sh ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/check-virtio.sh file... [OK] [#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/releases/download/v1.0.0/virtio-4.4.59p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz ###################################################################################################################################### 100.0%###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/... [OK] [#] Successfully processed recipe for extension thethorgroup.virtio platform ds918p_25556 [#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds918p_25556.pat not found - downloading from https://global.download.synology.com/download/DSM/release/6.2.4/25556/DSM_DS918%2B_25556.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 263M 100 263M 0 0 76.4M 0 0:00:03 0:00:03 --:--:-- 76.4M [#] Verifying /home/tc/redpill-load/cache/ds918p_25556.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds918p_25556.pat file to /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/zImage to /home/tc/redpill-load/build/1642002093/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/rd.gz file to /home/tc/redpill-load/build/1642002093/rd-ds918p_25556-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1642002093/rd-ds918p_25556-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1642002093/rd-patched-ds918p_25556.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds918p_25556 platform extensions to /home/tc/redpill-load/build/1642002093/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1642002093/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] theoretically all extensions are loaded correctly!, 6.2.4 works perfectly the problems only comes when it's applied the U3. Quote Link to comment Share on other sites More sharing options...
Invaliduser Posted January 13, 2022 Share #184 Posted January 13, 2022 9 hours ago, rok1 said: How did you get it to work? I built a 3617 image and it's nothing more than a install loop VM or baremetal? Quote Link to comment Share on other sites More sharing options...
jarugut Posted January 13, 2022 Share #185 Posted January 13, 2022 6 hours ago, jarugut said: It looks that you will need the following modules : Found VGA Controller : pciid 8086d000022b1 Required Extension : i915 Searching for matching extension for i915 Found SATA Controller : pciid 8086d000022a3 Required Extension : ahci Searching for matching extension for ahci Found SATA Controller : pciid 1b4bd00009215 Required Extension : No matching extension Found SATA Controller : pciid 1b4bd00009215 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.igb ========================================== [#] Extension name: igb [#] Description: Adds Intel(R) Gigabit Ethernet Linux Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/igb [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb" *** Process will exit *** Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb" *** Process will exit *** Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb" *** Process will exit *** Found Ethernet Interface : pciid 8086d00001533 Required Extension : igb Searching for matching extension for igb Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json" ------------------------------------------------------------------------------------------------ Starting loader creation Checking user_config.json : Done Cache directory OK [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [OK] [#] ========================================== thethorgroup.boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json [#] Platforms supported: ds918p_41890 ds918p_25556 ds3615xs_41222 ds3615xs_25556 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [OK] [#] ========================================== thethorgroup.virtio ========================================== [#] Extension name: VirtIO [#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar) [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio [#] Software author: https://www.linux-kvm.org/page/Virtio [#] Update URL: https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json [#] Platforms supported: ds918p_41890 ds918p_25556 ds3615xs_41222 ds3615xs_25556 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating pocopico.igb extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [#] Extension pocopico.igb index is already up to date [#] Updating thethorgroup.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [#] Extension thethorgroup.boot-wait index is already up to date [#] Updating thethorgroup.virtio extension... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ###################################################################################################################################### 100.0% [#] Extension thethorgroup.virtio index is already up to date [#] Updating thethorgroup.virtio extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds918p_25556 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/ds918p_25556.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ###################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.igb platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/igb-4.4.59plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/igb-4.4.59plus.tgz ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/igb-4.4.59plus.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/igb-4.4.59plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/src/check-igb.sh to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/check-igb.sh ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_25556/check-igb.sh file... [OK] [#] Successfully processed recipe for extension pocopico.igb platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ###################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.boot-wait platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds918p_25556/boot-wait.sh ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.boot-wait/ds918p_25556/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension thethorgroup.boot-wait platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/recipes/ds918p_25556.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ###################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.virtio platform ds918p_25556 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/src/check-virtio.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/check-virtio.sh ###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/check-virtio.sh file... [OK] [#] Downloading remote file https://github.com/RedPill-TTG/redpill-virtio/releases/download/v1.0.0/virtio-4.4.59p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz ###################################################################################################################################### 100.0%###################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/... [OK] [#] Successfully processed recipe for extension thethorgroup.virtio platform ds918p_25556 [#] Unpacking files from /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/virtio-4.4.59p.tgz to /home/tc/redpill-load/custom/extensions/thethorgroup.virtio/ds918p_25556/... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds918p_25556.pat not found - downloading from https://global.download.synology.com/download/DSM/release/6.2.4/25556/DSM_DS918%2B_25556.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 263M 100 263M 0 0 76.4M 0 0:00:03 0:00:03 --:--:-- 76.4M [#] Verifying /home/tc/redpill-load/cache/ds918p_25556.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds918p_25556.pat file to /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/zImage to /home/tc/redpill-load/build/1642002093/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1642002093/pat-ds918p_25556-unpacked/rd.gz file to /home/tc/redpill-load/build/1642002093/rd-ds918p_25556-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1642002093/rd-ds918p_25556-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1642002093/rd-patched-ds918p_25556.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds918p_25556 platform extensions to /home/tc/redpill-load/build/1642002093/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1642002093/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] theoretically all extensions are loaded correctly!, 6.2.4 works perfectly the problems only comes when it's applied the U3. I only have this problem with version 6.2.4. I've tried your tinycore boot in the same qnap ts-453a with apollake 7.0.1 U2 works perfectly the update. without the possible logs of the system I'm not sure if this information can help in something. My intention is install the 6.2.4 to be able to keep the option to use the TDT USB dongle to be able to see and record the TV. Quote Link to comment Share on other sites More sharing options...
krisr77 Posted January 13, 2022 Share #186 Posted January 13, 2022 has somebody had an issue when after successful (i guess, no errors) build and reboot cannot access dsm loader page ? (no ping, no output on browser, find.synology.com also cannot find new dsm). installation is on VM (vwamre player so card network is E1000). Builder Linux appliance is getting proper ip address an has internet connection without any problem) Quote Link to comment Share on other sites More sharing options...
Invaliduser Posted January 13, 2022 Share #187 Posted January 13, 2022 5 minutes ago, krisr77 said: has somebody had an issue when after successful (i guess, no errors) build and reboot cannot access dsm loader page ? (no ping, no output on browser, find.synology.com also cannot find new dsm). installation is on VM (vwamre player so card network is E1000). Builder Linux appliance is getting proper ip address an has internet connection without any problem) Do you have a serial connection on the VM to terminal in and monitor boot progress? Quote Link to comment Share on other sites More sharing options...
rok1 Posted January 13, 2022 Share #188 Posted January 13, 2022 1 hour ago, Invaliduser said: VM or baremetal? Bare metal. Quote Link to comment Share on other sites More sharing options...
krisr77 Posted January 13, 2022 Share #189 Posted January 13, 2022 49 minutes ago, Invaliduser said: Do you have a serial connection on the VM to terminal in and monitor boot progress? no serial on the console just usual screen Quote Link to comment Share on other sites More sharing options...
tester Posted January 13, 2022 Share #190 Posted January 13, 2022 1 hour ago, krisr77 said: has somebody had an issue when after successful (i guess, no errors) build and reboot cannot access dsm loader page ? (no ping, no output on browser, find.synology.com also cannot find new dsm). installation is on VM (vwamre player so card network is E1000). Builder Linux appliance is getting proper ip address an has internet connection without any problem) modify vmx to e1000e or vmxnet 3 and start from scratch. if 6.2.4 add two serial ports Quote Link to comment Share on other sites More sharing options...
magara Posted January 13, 2022 Share #191 Posted January 13, 2022 HP microserver G8 baremetal i used this guide https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ img 0.44 version on microsd card i had to set active third partition on sd card then tinycore loaded i have run everything automatical scripts USV VID PID serial number updated to bromolow 3615x it makes pat ,that i downloaded with winsc - location was little bit different but i have found it thed restart it , synology assistant found and foud my old disk from 6.2.4 it says migratable som i set migrate apps settings everything put there downloaded pat an after maybe 10 minutes everything loaded and converthed everything works flawlessly, i run ch_cpuinfo so i see there correct cpu 1 thing doesnt work - powerbutton doesnt work, now i cant turn it off correctly because if i turn off dsm server stays on maybe i need to implement HP-AMS to tiny core , or new version powerbutton.spk but dsm 7 redpill loads faster and dsm is responsive quick over previous 6.2.4 fan is on 14 percent so it is quiet enought thanks Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 13, 2022 Author Share #192 Posted January 13, 2022 (edited) 5 minutes ago, magara said: HP microserver G8 baremetal i used this guide https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ img 0.44 version on microsd card i had to set active third partition on sd card then tinycore loaded i have run everything automatical scripts USV VID PID serial number updated to bromolow 3615x it makes pat ,that i downloaded with winsc - location was little bit different but i have found it thed restart it , synology assistant found and foud my old disk from 6.2.4 it says migratable som i set migrate apps settings everything put there downloaded pat an after maybe 10 minutes everything loaded and converthed everything works flawlessly, i run ch_cpuinfo so i see there correct cpu 1 thing doesnt work - powerbutton doesnt work, now i cant turn it off correctly because if i turn off dsm server stays on maybe i need to implement HP-AMS to tiny core , or new version powerbutton.spk but dsm 7 redpill loads faster and dsm is responsive quick over previous 6.2.4 fan is on 14 percent so it is quiet enought thanks I had the same on Microserver G7, i just have to wait a little longer but eventually it powers off. Edited January 13, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 13, 2022 Author Share #193 Posted January 13, 2022 (edited) 3 hours ago, jarugut said: I only have this problem with version 6.2.4. I've tried your tinycore boot in the same qnap ts-453a with apollake 7.0.1 U2 works perfectly the update. without the possible logs of the system I'm not sure if this information can help in something. My intention is install the 6.2.4 to be able to keep the option to use the TDT USB dongle to be able to see and record the TV. I see that you are loading extension igb automatically. I will need to verify if these are loading succesfully on my test VM ------------------------------------------------- Tested and the upgrade to 6.2.4 U3 seems to fail at : Partition Version=8 /sbin/e2fsck exists, checking /dev/md0... /sbin/e2fsck -pvf returns 0 Mounting /dev/md0 /tmpRoot [ 23.834967] EXT4-fs (md0): barriers disabled [ 23.844853] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: ------------upgrade Begin upgrade procedure No upgrade file exists End upgrade procedure ============upgrade ls: /tmpRoot/usr/share/init/root-file-system.override: No such file or directory ls: /tmpRoot/usr/share/init/hostname.override: No such file or directory ls: /tmpRoot/usr/share/init/syslog-ng.override: No such file or directory ls: /tmpRoot/usr/share/init/dsmupdate.override: No such file or directory ls: /tmpRoot/usr/share/init/smallupdate.override: No such file or directory ls: /tmpRoot/usr/share/init/rc.override: No such file or directory Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:smallfixnumber -> 0 value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2 Exit on error [7] root not matched with junior... Thr Jan 13 16:55:20 UTC 2022 /dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=994776k,nr_inodes=248694,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 7 starting pid 4864, tty '': '/etc/rc' ----------------- Not really sure what that means but its not an extensions issue. I've noticed that when something goes wrong during the boot process the DSM will fail back into install. I would stick with 6.2.4. ------------------------------------------------------------- What you can do after you end up in the recover loop to recover ? Read below : Start telnet service by opening a browser and point to : http://<your-dsm-ip-address>:5000/webman/start_telnet.cgi Then telnet as user root and execute the following : # mount /dev/md0 /mnt # rm -rf /mnt/.syno # reboot -f Edited January 13, 2022 by pocopico verified 918 6.2.4. U3 fails 1 Quote Link to comment Share on other sites More sharing options...
Invaliduser Posted January 13, 2022 Share #194 Posted January 13, 2022 35 minutes ago, krisr77 said: no serial on the console just usual screen I'm not too familiar with VMware, but in proxmox you would assign a serial port to the vm, then from the host's shell, qm terminal VMID. Quote Link to comment Share on other sites More sharing options...
Invaliduser Posted January 13, 2022 Share #195 Posted January 13, 2022 1 hour ago, rok1 said: Bare metal. I'm using proxmox... but I followed the instructions here https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ Post your output and someone may be able to help. Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 13, 2022 Author Share #196 Posted January 13, 2022 For everyone that has no serial port and ends up wanting to further troubleshoot when stuck on recovery or install page. Quote Link to comment Share on other sites More sharing options...
Aigor Posted January 13, 2022 Share #197 Posted January 13, 2022 2 hours ago, Invaliduser said: I'm not too familiar with VMware, but in proxmox you would assign a serial port to the vm, then from the host's shell, qm terminal VMID. add serial port and point them to a file on vm folder Quote Link to comment Share on other sites More sharing options...
Aigor Posted January 13, 2022 Share #198 Posted January 13, 2022 Tinycore 4.4 on HP Gen8 with Intel 10 GB card Is there a way to exclude this module from loader build? I don't need at boot time and the module into DSM works as well [-] Failed to update recipe for pocopico.ixgbe extension for platform ds3617xs_42218. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== pocopico.ixgbe ========================================== [#] Extension name: ixgbe [#] Description: Adds Intel(R) 10GbE PCI Express Linux Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/ixgbe [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json [#] Platforms supported: ds918p_41890 ds918p_25556 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 13, 2022 Author Share #199 Posted January 13, 2022 2 minutes ago, Aigor said: Tinycore 4.4 on HP Gen8 with Intel 10 GB card Is there a way to exclude this module from loader build? I don't need at boot time and the module into DSM works as well [-] Failed to update recipe for pocopico.ixgbe extension for platform ds3617xs_42218. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== pocopico.ixgbe ========================================== [#] Extension name: ixgbe [#] Description: Adds Intel(R) 10GbE PCI Express Linux Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/ixgbe [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json [#] Platforms supported: ds918p_41890 ds918p_25556 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= Well, good question , i never thought that someone would like to exclude an extension. I need to add that to my todo list. Meanwhile please comment the following line and answer no when you are asked to update rploader. Line number 1126 : # listmodules 1 Quote Link to comment Share on other sites More sharing options...
Aigor Posted January 13, 2022 Share #200 Posted January 13, 2022 (edited) 6 minutes ago, pocopico said: Well, good question , i never thought that someone would like to exclude an extension. I need to add that to my todo list. Meanwhile please comment the following line and answer no when you are asked to update rploader. Line number 1126 : # listmodules Thanks, i'v dismounted card, i'm trying and i don't need to boot Other "issue" sometimes, like now, download of pat file is very slow, i already have pat file but i can't scp into /home/tc/redpill-load/cache even if run chmod 777. i'm on windows with putty companion so i use pscp -P 22 pat.file tc@192.168.1.100:/home/tc/redpill-load/cache/ But i get permission denied Edited January 13, 2022 by Aigor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.