geekllem Posted March 13, 2016 Share #1 Posted March 13, 2016 Hello everyone, I explain my problem to see if someone can help me. I have a Buffalo Terastation TS58000D. Which I've put the XPEnoboot DS3615xs5.2-5644.5 and the latest software available: DSM_5.2-5644 Update-5. My problem is that the NAS is very noisy and the fan don't stop, all the time running. When using the original Buffalo firmware, the fan works ok. In Control Panel, in Hardware section, there is an option that says: Ffan speed mode, but I can not select any value, is empty. I have tried several things: 1) File scemd.xml Reading various forums, I see that this is the file that theoretically controls the fan issue. I have edited for values , but what surprises me is that there are different options for each hardware (hw_version = Synology-DX5 Synology-DX510, Synology-DX1211, Synology-RX1211RP, etc), but not the option of our installation DS3615. I edited the file and copying the values of other hardware I added these versions: hw_version = Synology-DS3615xs hw_version = Synology-DS3615xs-j hw_version = Synology-DS-3615xs But it didn't work, still noisy The edition of this file've made in: /usr/syno/etc/scemd.xml and /usr/syno/etc.defaults/scemd.xml I can understand that the control panel menu appears empty because no configuration settings. Any ideas? 2) I have checked the BIOS to boot the NAS, but there is no configurable option for the fan. It is a bios of Aptio American Megatrends, version 2.14.1219 3) I followed this post: viewtopic.php?f=2&t=2565 mktemp installed, lm-sensors etc.etc .. but nothing. still noisy ... any ideas? can you help me? Thank you very much in advance. Link to comment Share on other sites More sharing options...
brantje Posted March 13, 2016 Share #2 Posted March 13, 2016 Drivers for controlling a Buffalo Terastation are not in the Synology DiskStation. As those are 2 different brand they won't need to support each other. Posted via Xpenology.us Link to comment Share on other sites More sharing options...
geekllem Posted March 13, 2016 Author Share #3 Posted March 13, 2016 My Buffalo Terastation is working very well... the only problem is the fan.. all the time are running... Are you sure that is not possible to stop the fans ? Link to comment Share on other sites More sharing options...
pwvandeursen Posted April 26, 2016 Share #4 Posted April 26, 2016 Was anybody able to solve this yet? would really like to know how to control the fans on my Q1900 Link to comment Share on other sites More sharing options...
redpineapple Posted April 27, 2016 Share #5 Posted April 27, 2016 If your board supports 3 or 4 pin fan headers just go with a power adapter inbetween - http://www.coolerguys.com/840556089537. ... aQodBzAO1A Link to comment Share on other sites More sharing options...
zzarac Posted April 27, 2016 Share #6 Posted April 27, 2016 Read this guide to see what you need to control the fans: viewtopic.php?t=2565 In my case it didn't work because DSM does not include the driver for my Super I/O chip, so I kindly asked Trantor to include it in the next xpenology build: viewtopic.php?f=2&t=1361&start=780#p58195 He answered a few days ago and my Super I/O will be supported in the next build. Yeah! viewtopic.php?f=2&t=1361&start=790#p61011 Sent from my XT1063 using Tapatalk Link to comment Share on other sites More sharing options...
pwvandeursen Posted May 3, 2016 Share #7 Posted May 3, 2016 In the mean time I solved this with aq micro 12v step down converter and dialed the speed down sop I no longer heard it. I think somewhere around 6v. works great and temp of the drives is now below 30 iso above 50! Link to comment Share on other sites More sharing options...
geekllem Posted May 15, 2016 Author Share #8 Posted May 15, 2016 I solved... Here the solution... in spanish.. but it's easy to understand.. viewtopic.php?f=8&t=12893&p=63107#p63107 Link to comment Share on other sites More sharing options...
zzarac Posted May 15, 2016 Share #9 Posted May 15, 2016 I solved... Here the solution... in spanish.. but it's easy to understand.. viewtopic.php?f=8&t=12893&p=63107#p63107 Yep, exactly the same procedure I linked above, but in Spanish.... Sent from my XT1063 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts