nxlong2005 Posted March 11, 2016 #1 Posted March 11, 2016 (edited) When i started, my Nas continuous beep and stopped at starting service. When i restarted, it have failed Please help me. Thanks a lot. Edited March 13, 2016 by Guest
brantje Posted March 11, 2016 #2 Posted March 11, 2016 What kiind install do you use? Hypervisor or Bare metal? If bare metal, what hardware are you using? Posted via Xpenology.us
nxlong2005 Posted March 11, 2016 Author #3 Posted March 11, 2016 Build PC to NAS: DSM 5.2-5644.5; hardware Intel G530 2GB Mem GA-B7M-D3H 6x2TB synology hybrid RAID (SHR)
sbv3000 Posted March 12, 2016 #5 Posted March 12, 2016 I would remove the drives and try a 'fresh install' using the same boot usb on a spare hdd, just to make sure there is not a hardware issue. If thats ok then put the drives back in and try booting up in 'install/upgrade' mode', if that works then you might need to do some file checking as it looks like you have damaged file system on one or more of the drives, could be related to an hdd failure. if you can get the nas working, take a backup of data before you start messing about
nxlong2005 Posted March 13, 2016 Author #6 Posted March 13, 2016 I would remove the drives and try a 'fresh install' using the same boot usb on a spare hdd, just to make sure there is not a hardware issue.If thats ok then put the drives back in and try booting up in 'install/upgrade' mode', if that works then you might need to do some file checking as it looks like you have damaged file system on one or more of the drives, could be related to an hdd failure. if you can get the nas working, take a backup of data before you start messing about Thank a lot. It worked. Checking file system (1500 minutes remaining)
Recommended Posts