ruffpl Posted February 27, 2016 Share #1 Posted February 27, 2016 Hi. Today I have updated to XPEnoboot 5.2-5644.5 and after that I made server update to newest release DSM_5.2-5644 Update-5 ( from update 3). After reboot all my shared volumes were lost. I checked which disks are visible and there is only 1 volume (2 hdds in raid) connected directly to mainboard / all other 6 hdds are connected by LSI SAS2008 sata controller. Could You please help me to make it work again ? Link to comment Share on other sites More sharing options...
brantje Posted February 27, 2016 Share #2 Posted February 27, 2016 Sometimes its needed to reboot 2 -3 times. Posted via Xpenology.us Link to comment Share on other sites More sharing options...
ruffpl Posted February 27, 2016 Author Share #3 Posted February 27, 2016 Doesnt work Is there a way to downgrade? Link to comment Share on other sites More sharing options...
sbv3000 Posted February 27, 2016 Share #4 Posted February 27, 2016 you can 'downgrade' XPE by using the earlier boot image, 5644.4. Try that and see what happens downgrading DSM updates is harder. You could try; disconnecting your drives a new install of base DSM 5644 on a spare drive, connected to mobo sata port 0, create a volume and then delete it. reconnect other drives and boot up If you are lucky then DSM will boot from drive 1/sata 0 with the base DSM and you should see your other drives/volumes (system partitions may be corrupted but you can repair that) Link to comment Share on other sites More sharing options...
ruffpl Posted February 27, 2016 Author Share #5 Posted February 27, 2016 Whaahaa It works again with old xpenoboot All disks showed up again without any errors. Maybe there are some drivers missing in new bootimage for my raid controller Link to comment Share on other sites More sharing options...
Recommended Posts