Jump to content
XPEnology Community

Disks gone after DSM update


ruffpl

Recommended Posts

Hi. Today I have updated to XPEnoboot 5.2-5644.5 and after that I made server update to newest release DSM_5.2-5644 Update-5 ( from update 3). After reboot all my shared volumes were lost. I checked which disks are visible and there is only 1 volume (2 hdds in raid) connected directly to mainboard / all other 6 hdds are connected by LSI SAS2008 sata controller.

Could You please help me to make it work again :sad: ?

Link to comment
Share on other sites

you can 'downgrade' XPE by using the earlier boot image, 5644.4. Try that and see what happens

downgrading DSM updates is harder. You could try;

disconnecting your drives

a new install of base DSM 5644 on a spare drive, connected to mobo sata port 0, create a volume and then delete it.

reconnect other drives and boot up

If you are lucky then DSM will boot from drive 1/sata 0 with the base DSM and you should see your other drives/volumes (system partitions may be corrupted but you can repair that)

Link to comment
Share on other sites

×
×
  • Create New...