xpenology on Iomega StorCenter ix4-300d

[none]

Has anyone tried to run xpenology on a Iomega box?

I'm willing try but no any idea if it is possibleor not.

 

Thanks for your response.

[djelusion]

ive got this version of the iomega storcenter ix2-dl5 http://iomega.nas-central.org/wiki/Cate ... ter_ix2-dl.

 

reminds me of fast n the furious scene where the toyota supra is on the tow truck and everyone looks at it and says wow look at that junk.. tow it across the finish line.. well it has potential.. however im not a coder or none of that..

 

       |  \/  | __ _ _ ____   _____| | |
      | |\/| |/ _` | '__\ \ / / _ \ | |
      | |  | | (_| | |   \ V /  __/ | |
      |_|  |_|\__,_|_|    \_/ \___|_|_|

| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
\___/    |____/ \___/ \___/ \__|

 ** ix2-spi ** ** uboot_ver:0.0.8 **


** MARVELL BOARD: DB-88F6282A-BP LE 

U-Boot 1.1.4 (Oct 28 2011 - 15:18:22) Marvell version: 3.6.1 - EMC

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CD5A0

Soc: 88F6282 A1 CPU running @ 1600Mhz L2 running @ 800Mhz
SysClock = 533Mhz , TClock = 200Mhz 

DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000   size 256MB 
DRAM Total size 256MB  16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done

[fonix232]

While Synology does support Marvell Kirkwood SoCs, it would take a tremendous amount of work to fix it up for the bootloader, modify synobios, and I believe the 256MB RAM might not be enough to run a fully fledged DSM install...

[djelusion]

Yes however that's what I have.. but turns out the OP has something that is more than capable..

 

here are the specs

 

Tech Specs

Specifications

 

Desktop, compact form factor

Marvell Armada™ XP 1.3GHz Dual Core

512MB DDR3 Memory

4 x 3.5" Hot-Swap SATA-II Hard Disk Drives

JBOD, RAID 0, RAID 5 (Parity), RAID 10 (Mirroring

2 x RJ45 10/100/1000Mbps (GbE) Ethernet ports

LAN standards: IEEE 802.3, IEEE 802.3u

1 x USB 3.0 and 2 x USB 2.0 ports (to connect external HDD, UPS, Bluetooth dongle)

Power Consumption

Max: 60W

Min: 20W (drives spun down)

Peak: 80W for 5s

NOTE: These values represent a fully loaded device with the highest capacity HDD. Values may vary with other configurations.

 

like the supra on the tow truck.. it has potential after you put in 15k of overnight parts from japan