jestosebno Posted February 26, 2016 Share #1 Posted February 26, 2016 Hi, I'm runing XPEnoboot 5.2-5644.5 on intel baremetal with Dell bcm5709c dual port ethernet adapter. Problem is, that under network interface there in only LAN 1 and no LAN 2. Both ports are working fine under windows. I tried to enable and disable integrated realtek and it shows as LAN 3 adapter. Anyone has any idea? Sorry for my bad english. Link to comment Share on other sites More sharing options...
boefje Posted February 26, 2016 Share #2 Posted February 26, 2016 Give this a try http://xpenology.com/forum/viewtopic.php?f=2&t=12523 Link to comment Share on other sites More sharing options...
jestosebno Posted February 26, 2016 Author Share #3 Posted February 26, 2016 Thanks for reply, but LAN 2 in still not showing up. Link with switch is established, but i have no control over it. Link to comment Share on other sites More sharing options...
sbv3000 Posted February 27, 2016 Share #4 Posted February 27, 2016 Not sure if these apply to your exact NIC but - firmware updates? http://www.dell.com/support/home/us/en/ ... erId=PX6V4 http://www.dell.com/support/home/us/en/ ... erId=NF92Y One of the notes says; Fixes: - Unable to establish link on all four 57840 bNDC ports at 1Gbps Link to comment Share on other sites More sharing options...
jestosebno Posted February 27, 2016 Author Share #5 Posted February 27, 2016 FW update was first thing that i did. It does not help unfortunately. Link to comment Share on other sites More sharing options...
sbv3000 Posted February 27, 2016 Share #6 Posted February 27, 2016 have you tried 5644.4 boot loader, perhaps the 5709 driver is 'broken' in .5? Link to comment Share on other sites More sharing options...
Recommended Posts