Jump to content
XPEnology Community

DSM 7.0.1-42218


_l0_0l_
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Message added by Polanskiman,

Word of caution here. This is with a new Beta loader. Don't go playing around with your production box and this loader and then complain you lost all your data. Thoroughly test this before making the jump.

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Broken update to DSM 6.2.3-25426 to DSM 7.0.1v-42218 update 2

- Loader version and model: Tinycore

- Installation type: Asrock n3700-itx

- Using custom extra.lzma: NO

- Additional comments: i'm not sure the satamap command worked. Two disk were in error (but my raid has 2 disks spare. it was fixed with one click in the interface)

my satamap was 242 with jun loader 1.02b

Edit : i probably did a mistake posting here . i performed a reinstall to fix my broken update to 6.2.3 from 6.1.7

Edited by Martino
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: NONE

- Loader version and model: Tinycore img v0.4.5  - DS3615xs v7.0.1-42218 (update 2 automatic)

- Installation type: BAREMETAL - MB: AsRock Z87 extreme 6 | CPU: Intel Core i5 4670K

- Using custom extra.lzma: NO

- Additional comments: Only for test at moment | extra HBA: 1x Marvell 88SE9215 - 1x JMB582 | extra NIC: Intel 82576 - E1G42ET Chip

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218 Update 2

- Loader version and model: RedPill DS3615xs v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: esxi 7.0U3

- Additional comments: everything looks fine so far just a question. on the same version of esxi but the older xpenology my sfp+ card is working fine. on this version of xpenology it doesnt detects the card. Anybody has similar setup or an other NIC card maybe to buy?

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: none

- Loader version and model: RedPill v7.0.1-42218 DS3615xs/DS918+

- Using custom extra.lzma: NO

- Installation type: Baremetal (DS3615xs, Intel ITX board, CPU G620, 4GB, 1TB HDD / DS918+, Gigabyte ITX H97, CPU i5 4440, 8GB, 2 1TB HDD)

- Additional comments: For SataPortMap use de same amout of attached HDD.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MediaSmart Server EX490 (Xeon E3110 / 2Gb RAM)

- Additional comments:

Edited by fannoute
DSM 7.0.1 update 3 applied successfully
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ms 7588 ( msi p55) + xeon x3430 . Nic pci intel . 6hdd

- Additional comments:ACPI manual add:

./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Core i3-9100F - MSI H310M PRO-VDH+ - 16GB DDR4 - 2x2 TB HDD

- Additional comments: diskidxmap=002

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2 / loader DS918+
- Loader version and model: RedPill DS918+ v7.0.1-42218
update 2
- Using custom extra.Izma: NO
- Installation type: BAREMETAL - HP Envy 700 PC Series (with Intel core I7-4770 and 32GB ram DDR3)
- Additional comments: None

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: Tinycore RedPill DS918+ v7.0.1-42218 update 3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI h510m-a pro - i3-10105 - 1x120gb nvme as SSD cache- 2x 8tb WD RED - 1x60gb ssd for docker containers

- Additional comments:ACPI manual add to have power button working:

./rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/main/redpill-acpid/rpext-index.json

Pached libsynonvme.so.1 in order to change fixed address and recognize NVME as SSD cache

 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: Tinycore RedPill DS918+ v7.0.1-42218 update 3

- Using custom extra.lzma: No

- Installation type: Custom - MSI B250I PRO - Pentium G4560

- Additional comment: None

  • Like 1
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 (Jun Loader)

- Loader version and model: Tinycore RedPill DS3615 v7.0.1-42218 update 2

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP N54L Bios mod (C1E Disabled), 5x HDD,  SataPortMap = 6, Diskidxmap=00

- Additional comment: UPS EATON with USB not recognized

Edited by zoulou13
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2 (JUN'S LOADER v1.04b - DS918+)

- Loader version and model: RedPill DS3622xs+ v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte Z590 VISION G, i9 11900t - NIC: Intel X540-T2 (using rp-ext driver)

- Additional comments: Z590 onboard NIC not working as there is no driver yet (Intel i225). When using RedPill loader, sata port mapping is required for this Z590, I'm using this config DiskIdxMap=0006 SataPortMap=66 SasIdxMap=0 as there are 6 sata port on the board and 6 port pcie sata card.

Edited by _l0_0l_
Link to comment
Share on other sites

On 3/12/2022 at 5:01 PM, _l0_0l_ said:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2 (JUN'S LOADER v1.04b - DS918+)

- Loader version and model: RedPill DS3622xs+ v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte Z590 VISION G, i9 11900t - NIC: Intel X540-T2 (using rp-ext driver)

- Additional comments: Z590 onboard NIC not working as there is no driver yet (Intel i225). When using RedPill loader, sata port mapping is required for this Z590, I'm using this config DiskIdxMap=0006 SataPortMap=66 SasIdxMap=0 as there are 6 sata port on the board and 6 port pcie sata card.

all your cores and threads are recognized ? 

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N36L (Bios Mod)   5x 6TB,   C1e Disabled 

- Additional comments: None

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: No, new install

- Loader version and model: Tinycore Redpill v0.4.6 , Model DS3615xs, FW: Bromolow v7.0.1-42218 update 3

- Using custom extra.lzma: No

- Installation type: BAREMETAL, HP Microserver Gen8, 4xHDD 10T

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: Bromolow v6.1.7-15284

- Loader version and model: Tinycore Redpill v0.4.6 , Model DS3615xs, FW: Bromolow v7.0.1-42218 update 3

- Using custom extra.lzma: No

- Installation type: BAREMETAL, HP n54L, 4xHDD 2T, C1e Disabled

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: Tinycore  RedPill  DS918+ v7.0.1-42218  

- Installation type: MSI Z370 Pro A -I5 8600K -16GB Ram

- Using custom extra.lzma: NO

- Additional comments: Proxmox 7.01-2 test machine

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...