Jump to content
XPEnology Community

DSM 7.0.1-42218


_l0_0l_
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Message added by Polanskiman,

Word of caution here. This is with a new Beta loader. Don't go playing around with your production box and this loader and then complain you lost all your data. Thoroughly test this before making the jump.

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N40L 

- Additional comments: PCIe HP NC365T (4x1Gb) + 6 x 1 To 

Sans titre.jpg

Capture d’écran 2022-01-22 093903.jpg

Capture d’écran 2022-01-22 090947.jpg

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.04b bootloader

- Loader version and model: RedPill DS918+ v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J5005-ITX

- Additional comments: build image with UEFI support and 8168 ext module

 

1686825495_.thumb.png.e4c60f2d89da187722996e5bf6942c95.png

Edited by dimkap
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill  DDS918+ v7.0.1-42218 (TinyCore)

- Installation type: UNRAID - TUF GAMING B550M-PLUS - RAM 128Gb DDR4 NON-ECC - AMD Ryzen 9 3900X

- Additional comments: Reboot required by the update

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Jun's 1.04b bootloader

- Loader version and model: RedPill  DS918+ v7.0.1-42218

- Installation type: BAREMETAL - NAS WD Sentinel DX4000

- Using custom extra.lzma: NO

- Additional comments: DSM update - 20 min

Edited by Dixsu
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: Fresh Install
- Loader version and model: RedPill DS3615xs v7.0.1-42218 Update 2
- Using custom extra.lzma: NO
- Installation type: ESXI 7.0U2a

 

Build image from source: https://github.com/tossp/redpill-tool-chain/archive/refs/heads/master.zip  
Then convert img to vmdk for VM.
May due to old CPU (E5-2600V2), fail to load with apollolake, can only use bromolow.

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma:  NO

- Installation type: BAREMETAL - HP Microserver Gen8 ,Xeon E3-12640

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L 

- Additional comments: 5x HDD [1+4SHR], Onboard Nic - Enabled, C1E - Disabled, ACPI - v3.0, Quickconnect - fine.

Edited by WDCluB
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.04b bootloader

- Loader version and model: RedPill DS918+ v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J5040-ITX

- Additional comments: build image with UEFI support

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L 

- Additional comments: Intel NIC, Onboard Nic - Enabled, C1E - Disabled, ACPI - v3.0

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.3 Update 3 - 3617xs - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel S1200SPLR / Xeon E3-1260L V5 / 2 x 8Gb DDR4 ECC / 2x onboard Intel I-210T1 1GbE

- Additional comments: 4 x HDD 1Tb (3xRAID5+1xSpare) + 2 x HDD 1Tb Basic, C1E - Disabled, Legacy, (pow_cons=<80W)

Edited by Palko
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Jun's 1.04b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Installation type: BAREMETAL - SuperMicro x10slm-f / 8* 4tb SAS drives

- Using custom extra.lzma: NO

- Additional comments: DSM update - 20 min, required prior to build:

sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt2sas/rpext-index.json

 

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218 Update 2

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: NO

- Installation type: VMware VM
- Additional comments: No problems so far, still testing all the functionalities, i will come back with an update in a few weeks 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 2 - Jun's 1.04b bootloader

- Loader version and model: RedPill DS918+ v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J4105-ITX

- Additional comments: build image with UEFI support
image.thumb.png.712d6397f4df31b5262987b73d43768d.pngimage.thumb.png.804c618bd8cbf2d62a1089e35d030040.png

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS918+ v7.0.1-42218 Update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI H510M A-PRO, Celeron G5905 - NIC: ONBOARD

- Additional comments:

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.03b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2 (TyniCore)

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock Rack C2550D4I

- Additional comments: mode migration keep configs & datas

       - Wol, automatic on and off, AudioStation, videostation, Synology Photos, Drive, reverse proxy, Radius Server, HyperBackup, ACPI with IPMI : WORKS

       - Mapping parameters : sataportmap=4224 & diskidxmap=00040608

       - Hdds : vol1 : 10 x 4tb SHR2 (btrfs) ; vol2 2 x 3Tb (all recovry, no data loss)

       - Additionnal PCI-E Controler : StarTech USB3 Work

       - Additional extensions : network auto-detect with ./rploader.sh ext bromolow-7.0.1-42218 auto ; and for ACPI manual add : ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json

Edited by renegadeBE
  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: -

- Loader version and model: RedPill DS918+ DSM 7.0.1-42218 Update 2

- Using custom extra.lzma: No

- Installation type: BAREMETAL - ZBOX-CI320NANO - single drive 120 GB SSD - 8 GB DDR3L 1333MHz

- Additional comment:

                         - CONFIGURE SATA AS: AHCI (NOT IDE!!!!!!).

                         - Spend hours looking at why the installation couldn't detect drives..... I hope this can help other people.

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 (Jun's Loader v1.03b)

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma:  NO

- Installation type: BAREMETAL - HP Microserver Gen8, Xeon E3-1260L, 16GB RAM

- Additional comments: AHCI SATA, build bromolow-7.0.1-42218 - see https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ for installation details

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.04b bootloader

- Loader version and model: RedPill DS918+ v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte B365M DS3H - Intel NIC

- Additional comments: 

Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.04b bootloader

- Loader version and model: RedPill 3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Mediaserver x510, 4GB ram 4 HDD, socet LGA 755 Core 2 Quad Q8400s  

- Additional comments: 

1856112868_2022-02-13182343.thumb.png.50e9c3792552725c012c4cf43ae0a8b2.png

Edited by LDiamond
editing
Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.04b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - msi h61i-e35 (ms-7677) 1.0, Xeon E3-1260L, 16GB RAM, PCI Express SATA 3, 2 port PCIe SATA III 6Gb/s

- Additional comments: 

       - Mapping parameters : sataportmap=62 & diskidxmap=0004

       - Hdds : vol1 : 4 x 4tb SHR2 (btrfs) ; SSD 1 x 256gb

       -With ./rploader.sh, the satamap is now: SataPortMap:6, DiskIdxMap:00, although there are only 4 ports. With SataPortMap: 4, DiskIdxMap: 00, disks 3 and 4 have been disabled. Only after adding PCIe_to_SATA and SataPortMap:62, DiskIdxMap:0002 all disks connected

Edited by konk
  • Like 1
Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3 - Jun's 1.04b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 update 2

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HPE ProLiant MicroServer Gen10 Plus

- Additional comments: standard installation

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...