Jump to content
XPEnology Community

DSM 7.0.1-42218


_l0_0l_
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Message added by Polanskiman,

Word of caution here. This is with a new Beta loader. Don't go playing around with your production box and this loader and then complain you lost all your data. Thoroughly test this before making the jump.

Recommended Posts

1609200677_ScreenShot2021-12-12at10_25_03AM.thumb.png.1ca49b10c2f55916b3d2854bf73e26b0.png563520200_ScreenShot2021-12-12at10_25_16AM.thumb.png.3641a0ba69eca60eb8f397726a1b2c32.png638877457_ScreenShot2021-12-12at10_25_32AM.thumb.png.fbcec867bf306cd7f706d7d5ff589eed.png

 

https://www.synology.com/en-global/releaseNote/DSM

 

Spoiler

(2021-10-13)

Important notes

DSM 7.0.1-42218 is updated on October 21 to fix issues with  SMB Service 4.10.18-0316. Users who have already installed this version of DSM are recommended to update SMB Service in Package Center.

Before Update

  1. The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly. If you want to update to the latest version now, please go to Synology Download Center and manually update your DSM.
  2. DSM 7.0.1 will restart your Synology NAS.
  3. After installing DSM 7.0.1, you will not be able to downgrade to a previous DSM version.
  4. Before updating, your Synology NAS should be running DSM 6.2 or above versions.
  5. Reserve extra time to complete DSM 7.0.1 update. The DSM update takes 10 to 20 minutes, while the package update may take more than an hour. The actual time depends on the computing power of your model, the number of media indexing files, and the number of packages installed.
  6. If you're performing a clean installation, make sure to complete the installation with find.synology.com or Synology Assistant 7.0-50029 or above.
  7. To avoid possible compatibility issues, users who installed Active Insight, Synology Photos, and Secure SignIn mobile applications during DSM 7.0 Preview/Beta programs should update the applications to the latest version after the DSM update.
  8. DSM 7.0.1 consumes more system resources, including memory. Make sure your NAS has at least 1 GB of memory before updating.
  9. This version of DSM is compatible with the models below.
  • FS-Series: FS6400, FS3600, FS3400, FS3017, FS2017, FS1018
  • SA-Series: SA3600, SA3400, SA3200D
  • 21-Series: RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+, DS1821+, DS1621+, DS1621xs+, DVA3221, RS4021xs+, RS3621xs+, RS3621RPxs
  • 20-Series: RS820RP+, RS820+, DS1520+, DS920+, DS720+, DS620slim, DS420+, DS420j, DS220+, DS220j, DS120j
  • 19-Series: RS1219+, RS819, DS2419+II, DS2419+, DS1819+, DS1019+, DS419slim, DS119j, DVA3219, RS1619xs+
  • 18-Series: RS2818RP+, RS2418RP+, RS2418+, RS818RP+, RS818+, DS1618+, DS918+, DS718+, DS418, DS418play, DS418j, DS218+, DS218, DS218play, DS218j, DS118, RS3618xs, DS3018xs
  • 17-Series: RS217, DS1817+, DS1817, DS1517+, DS1517, RS4017xs+, RS3617xs+, RS3617xs, RS3617RPxs, RS18017xs+, DS3617xs, DS3617xsII
  • 16-Series: RS2416RP+, RS2416+, RS816, DS916+, DS716+II, DS716+, DS416, DS416play, DS416slim, DS416j, DS216+II, DS216+, DS216, DS216play, DS216j, DS216se, DS116, RS18016xs+
  • 15-Series: RS815RP+, RS815+, RS815, DS2415+, DS1815+, DS1515+, DS1515, DS715, DS415+, DS415play, DS215+, DS215j, DS115, DS115j, RC18015xs+, DS3615xs, DS2015xs
  • 14-Series: RS2414RP+, RS2414+, RS814RP+, RS814+, RS814, RS214, DS414, DS414slim, DS414j, DS214+, DS214, DS214play, DS214se, DS114, RS3614xs+, RS3614xs, RS3614RPxs
  • 13-Series: DS2413+, DS1813+, DS1513+, DS713+, DS213j, RS3413xs+, RS10613xs+
  1. For the models below, you can only download the upgrade patch from Synology Download Center because you won't receive notifications for this update on your DSM.
  • XS Series: RS3413xs+, RS3614xs+, RS3614xs, RS3614RPxs, RS10613xs+
  • Plus Series: DS214+, DS713+, DS1513+, DS1813+, DS2413+, RS814RP+, RS814+, RS2414RP+, RS2414+
  • Value Series: DS114, DS214, DS214play, DS414, RS214, RS814,
  • J Series: DS119j, DS213j, DS214se, DS414j, DS414slim

DSM

  1. USB devices (Wi-Fi dongle, Bluetooth dongle, 3G/4G dongle, USB DAC/speaker, and DTV dongle) are no longer supported. If your Synology NAS is currently connected via a wireless dongle, it will be disconnected after the update.
  2. DSM 7.0.1 ends support for ext3. We strongly suggest backing up the data stored on your ext3 volumes and transferring the data to volumes with supported file systems before the update.
  3. DSM 7.0.1 by default disables NTLMv1 and enables NTMLv2 only, so SMB clients (e.g., Windows XP devices, media players, network printers, smart TVs, and IP cameras) won’t be able to access your Synology NAS. To restore the connection after the update, go to Control Panel > File Services > SMB > Advanced Settings > Others and enable NTLMv1 authentication.
  4. NFSv4.1 and related advanced functions (multipathing) are no longer supported on Synology NAS models with the following package architectures: Alpine, Alpine4k, armada38x, Avoton, Braswell, Bromolow, Cedarview, Grantley, Monaco. If you had previously enabled NFSv4 and NFSv4.1, the maximum NFS protocol is set to NFSv4 by default after the update. For more information about the package architecture of your model, please refer to this article.
  5. Creating SSD caches on block-level LUNs is no longer supported. Existing SSD caches for block LUNs will function normally after the update.
  6. NT4 domains are no longer supported. Current NT4 domains will be unavailable after the update.
  7. The URLs used by DSM when updating or running services have been modified. Please read this article and make sure that your firewall rules are configured appropriately.
  8. iSCSI Manager will become SAN Manager. Please refer to package release notes for more details.
  9. When you reconnect to iSCSI targets from your VMware ESXi hosts after the DSM update, the datastores on the LUNs that are mapped to the targets may not be mounted properly. This only happens to LUNs created before the update. The resolution can be found in VMware Knowledge Base.
  10. To provide comprehensive TLS support and ensure compatibility, the TLS/SSL profile level in Modern compatibility will automatically change to Intermediate Compatibility after the update.
  11. EZ-Internet is merged with Router Configuration in Control Panel. To set up port forwarding, go to Control Panel > External Access > Router Configuration.
  12. Python3 is merged into DSM as a built-in service. The original Python3 package will be unavailable in Package Center and you can remove it manually.
  13. The following DDNS providers are removed from the service provider list at Control Panel > External Access > DDNS:

ClouDNS, DNO-O-Matic, DNSEXIT, Dynamic DO!.jp, Joker.com, RU-CENTER, TwoDNS.de, Variomedia, Zoneedit.com

  1. The updated QuickConnect connection is secured with an SSL certificate, and your QuickConnect domain will be passed to Let's Encrypt for certificate application purposes. Please refer to the Services Data Collection Disclosure for more details.
  2. Security Advisor by default enables Login Analysis and certain custom account detection check items after the update.
  3. Video conversion to FLV and MPEG-4 Part 2 formats on the following models is no longer supported.
  • 20-Series: DS120j
  • 19-Series: DS119j
  • 16-Series: DS216se
  • 15-Series: DS215j, DS115, DS115j
  • 14-Series: RS814, RS214, DS414, DS414slim, DS414j, DS214+, DS214, DS214se, DS114
  • 13-Series: DS213j

Packages

  1. Synology Moments and Photo Station will be upgraded to and merged as Synology Photos. If you would like to use Synology Photos on your mobile devices, please install the iOS/Android app. See this page for more details.
  2. Cloud Station Server and Cloud Station ShareSync will be upgraded to and merged with Synology Drive Server. If you are using any Cloud Station Suite applications (Cloud Station Server, Cloud Station Drive, Cloud Station Backup, Cloud Station ShareSync, or DS cloud), you must switch to their counterparts in the Synology Drive Suite to ensure compatibility. See this page for more details.
  3. MariaDB 5 is incompatible with DSM 7.0.1. To update to DSM 7.0.1, please install MariaDB 10, migrate the database, and uninstall MariaDB 5 in Package Center first.
  4. If you cannot find certain Synology approved third-party packages in Package Center, check this article for the latest status of the packages. For other third-party packages, please contact their developers for more information.
  5. The following packages are no longer supported:

Cloud Station Server (replaced by Synology Drive Server), Cloud Station ShareSync (replaced by Synology Drive Server), Discourse, DokuWiki, Drupal, Drupal8, DVBLink, GitLab, GLPI, Hasplm, Java7, Java8, LimeSurvey, Logitech® Media Server, LXQt, Magento, Magento2, MantisBT, Moments (replaced by Synology Photos), Mono, Moodle, Node.js 0.10, Node.js 0.12, Node.js v4, Node.js v6, Node.js v8, Odoo 8, OpenERP 6.1, OpenERP 7.0, OrangeHRM, Orthanc, osCommerce, osTicket, PHP PEAR, Photo Station (replaced by Synology Photos), phpBB, Piwik, Podcast Generator, PrestaShop, PrestaShop1.7, PythonModule, Redmine, Ruby, Spree, SugarCRM, SVN, Synology File Manager, Tomcat6, Tomcat7, TVMosaic, Webalizer.

  1. After you update to Web Station 3.0.0-0308, a web_packages shared folder will be created by default to store files from installed third-party packages (e.g., phpMyAdmin).

What’s New

  1. Supports migrating SA3200D system configurations when users perform HDD migration.
  2. Added support for memory cache mirroring across controllers for better data consistency on SA3200D.
  3. Added support for the ""Sync remote mounted folders"" option for Shared Folder Sync.
  4. Supports creating volumes of up to 1 PB in Btrfs (Peta Volume) format on the XS/XS+, SA (SA3200D excluded), and FS-series models. (Learn more)
  5. Added support for data deduplication on Btrfs volumes on certain models. (Learn more)
  6. Supports notifying users when there is insufficient storage for metadata.
  7. Updated OpenSSL to version 1.1.1l to fix multiple security vulnerabilities (CVE-2021-3711, CVE-2021-3712).

Fixed Issues

  1. Fixed an issue where DSM might not automatically reconnect to a VPN after disconnection.
  2. Fixed the sorting issue on the View Details page in Resource Monitor > Performance > Disks when a USB drive is connected.
  3. Fixed an issue where the display in Volume Settings in Storage Manager was incorrect once users pinned the desktop widgets.
  4. Fixed an issue where the throughput in Resource Monitor might not be displayed correctly when the system network traffic or the throughput of disks or volumes was heavy.
  5. Fixed an issue where when users used third-party extensions to change the DSM theme, they couldn't customize the wallpaper.
  6. Fixed an issue where when non-administrator users shared files with password-protected links, the file names were displayed incorrectly.
  7. Fixed an issue where a healthy drive might be falsely detected as malfunctioning after it was swapped with a failed drive in the same storage pool when the system was shut down. The issue would cause the degraded storage pool to crash or become missing.
  8. Fixed an issue where users couldn't import Docker container configuration files from local computers.
  9. Fixed an issue where certain packages couldn't be installed when the built-in ""DSM UI Compatible 6.x"" package is missing.
  10. Fixed an issue where package statuses might be stuck at ""Getting Status"" in Package Center.
  11. Fixed an issue where filters might not work when users edit domain user or group privileges at Control Panel > Application Privileges.
  12. Fixed an issue where Security Advisor didn't apply the security baseline setting for the first scan.
  13. Fixed an issue where users given the ""Local user and management"" privilege couldn't perform the assigned actions.
  14. Fixed an issue where users who had taken snapshots of a shared folder couldn't disable the usage detail analysis of the shared folder's volume in Storage Manager.
  15. Fixed an issue where automatic configuration backup might fail under certain conditions.
  16. Fixed a security vulnerability regarding GhostScript used by AirPrint. (CVE-2021-3781).
  17. Fixed multiple security vulnerabilities. (Synology-SA-21:25)"

 

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS3615xs v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte Z590 VISION G, i9 10900t - NIC: HP NC360T

- Additional comments: Z590 onboard NIC not working (Intel i225), DS3615xs and DS918+ only supports 8 cpu threads, so 10c/20t cpu only got 8t recognised, when RedPill supports DS3617xs it will load 16t.

Edited by _l0_0l_
Link to comment
Share on other sites

On 12/11/2021 at 10:34 PM, _l0_0l_ said:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS3615xs v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte Z590 VISION G, i9 10900t - NIC: HP NC360T

- Additional comments: Z590 onboard NIC not working (Intel i225), DS3615xs and DS918+ only supports 8 cpu threads, so 10c/20t cpu only got 8t recognised, when RedPill supports DS3617xs it will load 16t.

 

Thanks for this report, I know this a new Beta loader and to not use for production. But just wonder how stable is it ? In other words, how much time without a crash or kernel panic ?

Edited by David Rollin
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS918+ v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte Z590 VISION G, i9 10900t - NIC: HP NC360T

- Additional comments: Z590 onboard NIC not working (Intel i225), DS3615xs and DS918+ only supports 8 cpu threads, so 10c/20t cpu only got 8t recognised, when RedPill supports DS3617xs it will load 16t. When using DS918+ loader, sata port mapping is required for this Z590, I'm using this config DiskIdxMap=00 SataPortMap=6 SasIdxMap=0 as there are 6 sata port on the board. UHD750 still missing driver, so HW transcoding not working yet.

 

Edited by _l0_0l_
  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS918+ v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: VMware Workstation 16.2.1, on top of Ryzen 5 3600 / MSI B550M Bazooka A.70

- Additional comment: followed the youtube video

Edited by MichelD
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 7.0.1.42214

- Loader version and model: RedPill DS918+ v7.0.1-42214 RC

- Using custom extra.lzma: NO

- Installation type: ESXI 6.7

 

Update installed successfully, but after restart, DSM reports that a disk was changed and the system should be recovered.

Recovering seems to work, but after reboot the same message reappears...

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS918+ v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - i3-8300 (reported as j3455) / Asrock H370M + 6xSATA / 8GB / 2 x intel NICs (reported both as I211)

- Additional comments:

I think this is one of the most compatible worry free and cheapest setup you can build. Running 6X SATA -> 5X SHR 4TBs + 1 Basic (ssd), Both Nics are working, Scheduled Shutdown & Wake work, Transcoding works. Feel free to contact for additional checks you want me to verify.   

  • Like 3
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: No idea, so gonna say NO

- Installation type: BAREMETAL - HP Microserver Gen8 (Intel Xeon E3-1260L)

 

Notes - used RedPill Tinycore loader.

  • Like 3
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS3615XS+ v7.0.1-42218 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - SuperMicro x9spv-ln4f-3qe (i7 3612QE BGA, 16GB RAM, INTEL QM77 EXPRESS)

- Additional comments: All Working 4 NIC + IPMI (iLO). used SataPortMap=24

Edited by Hysle
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS3615XS+ v7.0.1-42218 

- Using custom extra.lzma: NO

- Migrate from DS918+ to DS3615XS+ . Migration is smooth and with no problems

- Using FindSynology.com to find the new DSM. Need to fix the lan IP address manually.

- Installation type: BAREMETAL. I5-8400 with 16G ram 4 Drives and 1 SSD

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Prodesk 400 G3 MT with 2 hdd 1To

- Additional comments: Error with value "SATAMAP"=4 => The correct value is "SATAMAP"=3 (because the number of sata ports is 3)

Edited by noabeuh
Link to comment
Share on other sites

On 1/12/2022 at 5:59 PM, profet said:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: No idea, so gonna say NO

- Installation type: BAREMETAL - HP Microserver Gen8 (Intel Xeon E3-1260L)

 

Notes - used RedPill Tinycore loader.

@profet: I'm also running DSM version DSM 6.2.3-25426 with my HP Microserver Gen8 and want to ugrade to v7.0.1-42218. Unfortunately, I have a problem to get my HP Microserver Gen8 booting from my USB stick with  tinycore-redpill image. Booting from USB with the Jun's Loader v1.03b DS3617xs works well. Also, the stick works on my laptop. Only the microserver does not want to boot from it. I have already tried several USB drives and SD card. How exactly did you get the Microserver Gen8 to boot from USB tinycore-redpill image ? Are there any specific BIOS option to be taken into account? THX 

Edited by zahni
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Lenovo Thinkcentre SSF M73 i3-4130 @ 3.4GHz 6GB RAM with 3 hdd

- Additional comments: Motherboard have 3 SATA port, SataPortMap; "3" came with error on disk 3 when I try to install DSM, SataPortMap; "1" installed successful but DSM see only 1 HDD. I ended with SataPortMap; "2" and SUCCESSFUL with 2 HDD.

  • Like 2
Link to comment
Share on other sites

Hi Community,

 

Meanwhile, booting from USB and creating tinycore-redpill boot image(for DS3617xs) for my HP Microserver Gen8 are working well. Thanks for the hint with BalenaEther and the partions to set active the partion.

 Now DSM loader boots ok, However when uploading  the pat file(ds3617xs_42218.pat) I always getting an error telling me the file is probably defect , while uploading to the NAS? I arleady have replaced the USB key and checked the PID/VID. Nothing was working.....

Is there anyone with the same problem, or knows what else I can try to solve the problem ? 

 

Unfortunately; I've think found so far . Thanks in advanvce. 

Edited by zahni
Link to comment
Share on other sites

2 hours ago, zahni said:

However when uploading  the pat file(ds3617xs_42218.pat) I always getting an error telling me the file is probably defect , while uploading to the NAS? I arleady have replaced the USB key and checked the PID/VID. Nothing was working.....

 

I'm not sure the CPU in the Gen8 can run the ds3617xs - you need to use the 3615xs instead I think. Works for me anyway. Think you may have to build the loader again as well.

Link to comment
Share on other sites

@profet: Thx, Meanwhile I've created a ds3615xs bootloader for my HP Microserver Gen8 and everything works well. Furthermore I know that there is a bug with the USB PID/VID recognition for the Redpill image of the ds3617xs. I found  some discussion about it in another thread. Most likely the problem comes from the fact that after booting the ID's are read incorrectly. I hope this will be fixed soon. All in all, I am very excited about this community. 

Edited by zahni
  • Like 2
Link to comment
Share on other sites

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: RedPill DS3615xs v7.0.1-42218

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8 (Intel Xeon E3-1260L)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 3 - Jun's 1.02b bootloader

- Loader version and model: RedPill DS3615xs v7.0.1-42218 Beta

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - QNAP TS-269 PRO

- Additional comments: Bootloader auto select countdown seems not working (even in Jun's bootloader), so I have to press enter everytime my NAS reboot.

Edited by kekesed97
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...