brantje Posted February 19, 2016 Share #1 Posted February 19, 2016 So who did the updare? Changelog: Updated Firewall filter policy to fix a security vulnerability caused by stack-based buffer overflow (CVE-2015-7547). This fix may impact read/write performance on the following models by no more than 15%, for which Synology is working on an enhancement in the future release. 16-series: DS216se 15-series: DS115j 14-series: EDS14, DS114, DS214se, RS214, DS414slim 13-series: DS213j, DS213air, DS213, DS413j 12-series: DS112, DS112 , DS112j, DS212, DS212j, DS212 , RS212, RS812 11-series: DS111, DS211, DS211 , DS211j, DS411, DS411slim, DS411j, RS411 10-series: DS110j, DS210j, DS410j Posted via MyXpenology Link to comment Share on other sites More sharing options...
kuma16830 Posted February 19, 2016 Share #2 Posted February 19, 2016 I just did the update 5 within control panel's automatic download and update. It did not require rebooting the system. And I tried to access the NAS it worked. Then I reboot the system and it worked. So it is safe. I am using XPEnoboot 5.2-5644.5. Hardware Setup: mobo Asus J1900I-C, 4G SO-DIMM, HD Seagate 1T ST1000DM003 Link to comment Share on other sites More sharing options...
brantje Posted February 19, 2016 Author Share #3 Posted February 19, 2016 Thanks, i also updated, worked flawlessly ^_^. Posted via MyXpenology Link to comment Share on other sites More sharing options...
holybabel Posted February 19, 2016 Share #4 Posted February 19, 2016 Made the update on my bare metal intel ss4200 within the control panel. No problems till now. Link to comment Share on other sites More sharing options...
NeoID Posted February 19, 2016 Share #5 Posted February 19, 2016 Seems to work fine for me too. Link to comment Share on other sites More sharing options...
tope Posted February 19, 2016 Share #6 Posted February 19, 2016 HP Microserver Gen8, OK. Link to comment Share on other sites More sharing options...
pastrychef Posted February 19, 2016 Share #7 Posted February 19, 2016 Everything seems fine after the update for me as well. Link to comment Share on other sites More sharing options...
noki Posted February 19, 2016 Share #8 Posted February 19, 2016 All OK Link to comment Share on other sites More sharing options...
Hennie-M Posted February 19, 2016 Share #9 Posted February 19, 2016 What version of the bootloader are you guys using? I might update tommorow. Link to comment Share on other sites More sharing options...
brantje Posted February 19, 2016 Author Share #10 Posted February 19, 2016 What version of the bootloader are you guys using? I might update tommorow. Xpenoboot 5.2-5644 Update 5 Posted via MyXpenology Link to comment Share on other sites More sharing options...
Hennie-M Posted February 20, 2016 Share #11 Posted February 20, 2016 What version of the bootloader are you guys using? I might update tommorow. Xpenoboot 5.2-5644 Update 5 Posted via MyXpenology Thanks! Synology is updated now and its working very nicely. I own a Hp Microserver Gen8. Link to comment Share on other sites More sharing options...
rhplus Posted February 20, 2016 Share #12 Posted February 20, 2016 Updated from control panel, Without any issues. No reboot. Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted February 20, 2016 Share #13 Posted February 20, 2016 Same for me. Everythings allright. Link to comment Share on other sites More sharing options...
marigo Posted February 20, 2016 Share #14 Posted February 20, 2016 Just updated to 5 running XPEnology as a guest on Proxmox. Only network services will do a restart. Everything looks fine. Bootloader: XPEnoboot DS3615xs5.2-5644.5 What happened to update 4? Link to comment Share on other sites More sharing options...
sbv3000 Posted February 21, 2016 Share #15 Posted February 21, 2016 Fo info - I tried a control panel Update 5 on a 5644 system with no earlier updates installed. It failed with a 'corrupt file' error. Once I'd applied U1-U3 it worked ok Link to comment Share on other sites More sharing options...
VolaLazioVola Posted February 22, 2016 Share #16 Posted February 22, 2016 Hi guys I have the DSM up with bootloader XPEnoboot DS3615xs5.2-5644.4. There is an update from Synology which I can do directly inside DSM (I am already on U3 or U4 don't remember it). I have actually see there is a new bootloader called XPEnoboot DS3615xs5.2-5644.5. I think this is a different update and it is not related to the DSM, right? Thanks Link to comment Share on other sites More sharing options...
sbv3000 Posted February 22, 2016 Share #17 Posted February 22, 2016 you are correct, the XPE point releases are updates to the boot loader to fix issues or add features. Provided you are within the same DSM version you can (usually) just upgrade your XPE boot loader and carry on. You can apply then apply your DSM updates separately. Link to comment Share on other sites More sharing options...
fonta_nero Posted February 22, 2016 Share #18 Posted February 22, 2016 Hi, updated ASROCK N3700M DS3615xs5.2-5644.3 to .5 and system fine, ok. Link to comment Share on other sites More sharing options...
Gronaldo Posted February 22, 2016 Share #19 Posted February 22, 2016 After update my network backup services (destination) is switched of. After reactivation all works. Link to comment Share on other sites More sharing options...
smally Posted February 23, 2016 Share #20 Posted February 23, 2016 No problems with HP ProLiant Gen8 MicroServer Celeron G1610T updating from update3 to update5 Link to comment Share on other sites More sharing options...
murile86 Posted April 30, 2016 Share #21 Posted April 30, 2016 No problems with HP ProLiant Gen7 MicroServer updating from update3 to update5 with baremetal Link to comment Share on other sites More sharing options...
Recommended Posts