iceget Posted February 18, 2016 Share #1 Posted February 18, 2016 dear community, i have a HP ProLiant G7 MicroServer N54L Server installed with XPEnoboot 5.2-5644.5 and DSM_5.2-5644 Update-3. the four harddiscs in the bays are correctly detected. but i have installed one more harddisc (onboard SATA board). this HDD are detected from BIOS but in DSM there is no additionally HDD detected. how i can bypass them? thanks many greets, iceget Link to comment Share on other sites More sharing options...
brantje Posted February 18, 2016 Share #2 Posted February 18, 2016 Can you boot with a linux live usb stick too see if the disks are detected? Posted via MyXpenology Link to comment Share on other sites More sharing options...
iceget Posted February 18, 2016 Author Share #3 Posted February 18, 2016 Yes, of course. Link to comment Share on other sites More sharing options...
Hackerjac Posted February 18, 2016 Share #4 Posted February 18, 2016 you need to install the hacked bios from here http://xpenology.me/downloads Link to comment Share on other sites More sharing options...
iceget Posted February 18, 2016 Author Share #5 Posted February 18, 2016 Hello, thanks for your info, but it's not working but i have updated the bios. i tried to upload my photos, but its not possible (board attachment quota has been reached). so now i have uploaded the photos to my website: # bios info http://www.raving.at/DSMHP/00.jpg # screenshots http://www.raving.at/DSMHP/01.jpg http://www.raving.at/DSMHP/02.jpg can you help me? thanks Link to comment Share on other sites More sharing options...
Hackerjac Posted February 18, 2016 Share #6 Posted February 18, 2016 http://i151.photobucket.com/albums/s156 ... C00021.jpg Make sure that the one with red arrow is set to disable in your bios Link to comment Share on other sites More sharing options...
iceget Posted February 18, 2016 Author Share #7 Posted February 18, 2016 Hello, thanks. i have deactivated this, but not success result. same as before. i have now built in other 5 hdds and installed dsm 4.2 on the same bios and same hp proliant, all 5 discs are appearing in the system.. what i do wrong? Can you help me? thanks! Link to comment Share on other sites More sharing options...
iceget Posted February 19, 2016 Author Share #8 Posted February 19, 2016 *push* can anybody help me? what can i try? - live system booting (via knoppix or ubuntu) all 5 hdds detected. - dsm 4.2 on same hardware, all 5 hdds detected - bios all 5 hdds detected thanks Link to comment Share on other sites More sharing options...
Huberer Posted February 19, 2016 Share #9 Posted February 19, 2016 Did you add the command rmmod=ata_piix/code] to the syslinux.cfg on your boot loader? Like described here [u][b]https://idmedia.no/projects/xpenology/installing-or-upgrading-to-xpenology-5-2-or-later/[/b][/u]. If no just try it. Link to comment Share on other sites More sharing options...
iceget Posted February 19, 2016 Author Share #10 Posted February 19, 2016 Hello, i have added this to the end of string: LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0781 pid=0x5567 loglevel=0 vga=0x305 rmmod=ata_piix not working... @ Hackerjac: if i disable your recommendation (from your post), my harddisc dosnt appears in bios. i have set the bios to the default version. what i can do? thanks Link to comment Share on other sites More sharing options...
Huberer Posted February 20, 2016 Share #11 Posted February 20, 2016 Did you add it three times in syslinux.cfg? It should look like this: UI menu.c32 PROMPT 0 TIMEOUT 50 DEFAULT xpenology MENU TITLE XPEnoboot 5.2-5644.4-df9e09c LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=XXXXXXXXXX mac1=XXXXXXXXXXXX rmmod=ata_piix vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 LABEL debug MENU LABEL XPEnology DSM 5.2-5644 Debug KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=XXXXXXXXXX mac1=XXXXXXXXXXXX rmmod=ata_piix vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 debug=1 LABEL install MENU LABEL XPEnology DSM 5.2-5644 Install/Upgrade KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=XXXXXXXXXX mac1=XXXXXXXXXXXX rmmod=ata_piix vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 upgrade=5.2-5644 The string should added direct after mac-address and if you don't have it direct after serial number Just try it again Link to comment Share on other sites More sharing options...
rhplus Posted February 20, 2016 Share #12 Posted February 20, 2016 Tried on my similare HW : HP ProLiant G7 MicroServer N40L. Seems its working. Can u check info from //Control Panel / Info Center / Storage? Link to comment Share on other sites More sharing options...
Hackerjac Posted February 20, 2016 Share #13 Posted February 20, 2016 Hello, i have added this to the end of string: LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0781 pid=0x5567 loglevel=0 vga=0x305 rmmod=ata_piix not working... @ Hackerjac: if i disable your recommendation (from your post), my harddisc dosnt appears in bios. i have set the bios to the default version. what i can do? thanks Its what i have done on both my n36l and its working with 6 drives in each Are you running bare metal, esxi or what ? Link to comment Share on other sites More sharing options...
iceget Posted February 22, 2016 Author Share #14 Posted February 22, 2016 hello peoples, thanks. now i have moved the rmmod=ata_piix line like your post. no result. in bios the harddisc was detected, but not in DSM. if i go to system info, storage only 4 harddiscs are detected. what i made wrong? so now i have installed (for test) a raidcontroller which i leave unconfigured with no array. dsm dedects perfectly. but only on the SATA port, no chance to get working? anybody here there have a HP ProLiant G7 Micro Server N54L witht the same setup?? 4 hdds in the bays, and one directly onboard? thank you! Link to comment Share on other sites More sharing options...
iceget Posted February 22, 2016 Author Share #15 Posted February 22, 2016 if disable the Sata ide combined mode, the 5. hdd not appears in bios. only if i enable this function the hdd appears in bios and live system linux (for test). Link to comment Share on other sites More sharing options...
Recommended Posts