holybabel Posted February 8, 2016 Share #1 Posted February 8, 2016 Hi everyone, i use a Intel SS4200 as xpenology server. This machine doesn't have a built in graphics card and only a pcie x1 slot. I bought a pcie x1 to x16 riser cable and attached an (very) old Club 3D X300S graphics card. Now evertime i want to install a new XPEnoboot-loader i have to disconnect the graphics card because the system hangs at variable points when i leave the graphics card attached. When i install the bootloader without graphics card and then reboot the system with attached graphics card everything works. Can someone help me with this one? Is the graphics card too old? Do i need a newer one? Greetings holybabel Link to comment Share on other sites More sharing options...
sbv3000 Posted February 9, 2016 Share #2 Posted February 9, 2016 as an idea, when you create your new bootloader, set the default XPE boot option to 'install/upgrade', by editing the syslinux.cfg menu settings. Once you have done the upgrade, edit the file back to the normal boot option. that way you dont need any graphics card attached any time Link to comment Share on other sites More sharing options...
pastrychef Posted February 10, 2016 Share #3 Posted February 10, 2016 Why do you need a video card? I tested XPEnology on an SS4200 for a few months before building my current system and never had a need to install a video card. Link to comment Share on other sites More sharing options...
holybabel Posted February 10, 2016 Author Share #4 Posted February 10, 2016 I use the graphic card to boot into a live linux system. After some testing with a new bootloader on a usb stick i boot a linux live system to "install" the bootloader onto the internal pata DOM device. And sometimes the boot priority is mixed up, so i have to access the bios to correct it again. Link to comment Share on other sites More sharing options...
Innersense Posted February 10, 2016 Share #5 Posted February 10, 2016 Hello, I have just purchased a Synology DS215j and i was pleasently amazed with its interface and functions! I also have an old Intel SS4200-E and i m very interested to upgrade it with XPEnology and get rid of the dumb EMC Software if its possible! Is there any tutorial on how to set up the SS4200 with XPEnology? I have searched the internet and didnt find anything Thanks in advance! Link to comment Share on other sites More sharing options...
pastrychef Posted February 10, 2016 Share #6 Posted February 10, 2016 I use the graphic card to boot into a live linux system. After some testing with a new bootloader on a usb stick i boot a linux live system to "install" the bootloader onto the internal pata DOM device. And sometimes the boot priority is mixed up, so i have to access the bios to correct it again. I started off using a USB flash drive for the boot loader. Once I got the Sinology DSM up and running, I logged in to it via SSH and installed the boot loader to the DOM from there. I never needed a video card. Keep in mind that even though the boot loader is on the DOM, the system may still change the boot order when there's a drive change. You can either hold the reset button while turning it on to force it to load from the DOM or blindly set the DOM to be the boot device in BIOS. I found instructions on how to do this via google. Link to comment Share on other sites More sharing options...
pastrychef Posted February 10, 2016 Share #7 Posted February 10, 2016 Hello, I have just purchased a Synology DS215j and i was pleasently amazed with its interface and functions! I also have an old Intel SS4200-E and i m very interested to upgrade it with XPEnology and get rid of the dumb EMC Software if its possible! Is there any tutorial on how to set up the SS4200 with XPEnology? I have searched the internet and didnt find anything Thanks in advance! 1. Create a USB flash drive with the XPEnology boot loader. 2. Plug the USB flash drive to one of the SS4200's USB ports (it doesn't matter which one). 3. Hold the reset button in the back of the SS4200 while powering up. When you see the LED in the power button turn orange, you can let go of the reset button. 4. Done. You can now use the Synology Assistant to look for the SS4200 and begin setting up the DSM. The SS4200 is a fantastic NAS to use for this because everything works including wake-on-lan without any extra work. I had mine running XPEnoboot 5.2-5592 and 5.2-5644 without any issues at all. Link to comment Share on other sites More sharing options...
holybabel Posted February 10, 2016 Author Share #8 Posted February 10, 2016 I started off using a USB flash drive for the boot loader. Once I got the Sinology DSM up and running, I logged in to it via SSH and installed the boot loader to the DOM from there. I never needed a video card. How did you manage to access the DOM from within xpenology? I tried to find the DOM via ssh and "fdisk -l" command, but i only see my 3 2TB Disks and my USB Stick. DiskStation> fdisk -l | grep Disk Disk /dev/sda: 2000.3 GB, 2000398934016 bytes Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes Disk /dev/sdc: 2000.3 GB, 2000398934016 bytes Disk /dev/synoboot: 65 MB, 65536000 bytes Do i have to mount the DOM or use a special command? Greetings HolyBabel Link to comment Share on other sites More sharing options...
pastrychef Posted February 10, 2016 Share #9 Posted February 10, 2016 I used "fdisk -l" to find it. Link to comment Share on other sites More sharing options...
holybabel Posted February 10, 2016 Author Share #10 Posted February 10, 2016 Strange, my fdisk doesn't show the DOM, as you can see in my post before. Link to comment Share on other sites More sharing options...
Innersense Posted February 11, 2016 Share #11 Posted February 11, 2016 (edited) 1. Create a USB flash drive with the XPEnology boot loader. 2. Plug the USB flash drive to one of the SS4200's USB ports (it doesn't matter which one). 3. Hold the reset button in the back of the SS4200 while powering up. When you see the LED in the power button turn orange, you can let go of the reset button. 4. Done. You can now use the Synology Assistant to look for the SS4200 and begin setting up the DSM. The SS4200 is a fantastic NAS to use for this because everything works including wake-on-lan without any extra work. I had mine running XPEnoboot 5.2-5592 and 5.2-5644 without any issues at all. Many thanks for you encouraging message. I m a bit skeptical on the procedure since SS4200 is a headless unit and I will not have visual messages of the bios. I have seen messages of other people connecting temporary vga’s for upgrading purposes. Are we sure that no keystrokes will be needed during the procedure? So the image of XPEnoboot 5.2-5644.4 will work fine? I Just put it to a USB with any Boot-USB Creation Utility? no any special settings needed and no special configuration of the image? I’m really excited about the possibility of the upgrade but don’t want to risk anything. Of course all the data will be backed-up and the disks ready for reconfigurations, but still I see some posts that a can’t completely understand. Some people use SSD chase and loosing 2 bays for that? For what purpose? On a simple configuration XPEnology is installed on the hard drives as data? Is there a meaning to be installed on a usb-stick permanently attached to SS4200 or elsewhere? A few blurry questions… I started off using a USB flash drive for the boot loader. Once I got the Sinology DSM up and running, I logged in to it via SSH and installed the boot loader to the DOM from there. I never needed a video card. I m pretty sure i m losing something in the procedure... what is SSH and for what is needed? What is DOM? How much RAM is needed for XPEnology Instalation? I currently have 512MB installed, I should upgrade to 2GB? Edited February 11, 2016 by Guest Link to comment Share on other sites More sharing options...
pastrychef Posted February 11, 2016 Share #12 Posted February 11, 2016 1. Create a USB flash drive with the XPEnology boot loader. 2. Plug the USB flash drive to one of the SS4200's USB ports (it doesn't matter which one). 3. Hold the reset button in the back of the SS4200 while powering up. When you see the LED in the power button turn orange, you can let go of the reset button. 4. Done. You can now use the Synology Assistant to look for the SS4200 and begin setting up the DSM. The SS4200 is a fantastic NAS to use for this because everything works including wake-on-lan without any extra work. I had mine running XPEnoboot 5.2-5592 and 5.2-5644 without any issues at all. Many thanks for you encouraging message. I m a bit skeptical on the procedure since SS4200 is a headless unit and I will not have visual messages of the bios. I have seen messages of other people connecting temporary vga’s for upgrading purposes. Are we sure that no keystrokes will be needed during the procedure? So the image of XPEnoboot 5.2-5644.4 will work fine? I Just put it to a USB with any Boot-USB Creation Utility? no any special settings needed and no special configuration of the image? I’m really excited about the possibility of the upgrade but don’t want to risk anything. Of course all the data will be backed-up and the disks ready for reconfigurations, but still I see some posts that a can’t completely understand. Some people use SSD chase and loosing 2 bays for that? For what purpose? On a simple configuration XPEnology is installed on the hard drives as data? Is there a meaning to be installed on a usb-stick permanently attached to SS4200 or elsewhere? A few blurry questions… I started off using a USB flash drive for the boot loader. Once I got the Sinology DSM up and running, I logged in to it via SSH and installed the boot loader to the DOM from there. I never needed a video card. I m pretty sure i m losing something in the procedure... what is SSH and for what is needed? You don't need any video!! Look at the real Synology devices, they don't have video out either. Everything can be done via the web-based interface. Just follow the directions I gave and you will be up and running within minutes. You don't need to know what SSH is. That message was not directed to you. Link to comment Share on other sites More sharing options...
Innersense Posted February 11, 2016 Share #13 Posted February 11, 2016 I know they dont need any video to use them and i m familiar with the Web Based configuration. I m just worried about the initial setup... Link to comment Share on other sites More sharing options...
pastrychef Posted February 11, 2016 Share #14 Posted February 11, 2016 I know they dont need any video to use them and i m familiar with the Web Based configuration.I m just worried about the initial setup... You don't have to change anything in the bios. There's nothing to worry about. Link to comment Share on other sites More sharing options...
pastrychef Posted February 12, 2016 Share #15 Posted February 12, 2016 Strange, my fdisk doesn't show the DOM, as you can see in my post before. Here is what I get when I use fdisk -l. You can clearly see it is listed as /dev/sdg. Then you can just use dd to copy the image to your DOM. If you don't see your DOM listed, maybe your DOM is not working properly. XPEnology> fdisk -l fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sda: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee EFI GPT fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdb: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee EFI GPT fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdc: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee EFI GPT fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sdd: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee EFI GPT Disk /dev/sdg: 16.0 GB, 16099835904 bytes 4 heads, 32 sectors/track, 245664 cylinders Units = cylinders of 128 * 512 = 65536 bytes Device Boot Start End Blocks Id System /dev/sdg1 * 1 384 24544+ e Win95 FAT16 (LBA) Link to comment Share on other sites More sharing options...
holybabel Posted February 12, 2016 Author Share #16 Posted February 12, 2016 Hm, my DOM is only 256MB. It is the standard DOM. Did you buy a new one? Link to comment Share on other sites More sharing options...
pastrychef Posted February 12, 2016 Share #17 Posted February 12, 2016 I have done it to the stock DOM and an aftermarket DOM. The procedure is the same. Link to comment Share on other sites More sharing options...
Recommended Posts