Jump to content
XPEnology Community

[SOLVED] System Partition Failed (Dell H200 Controller)


MrTPN
 Share

Recommended Posts

Hey Folks,

 

Just building our new storage system and having a few teething issues i hope i can secure some help with.

 

We have a set of 3 x 2TB WD Red Drives hooked up to a Dell H200 which has been cross flashed back to an LSI 9211-8i.

 

The drives show up just fine in the BIOS and in any live CD we throw on there. However when sinology installs (which goes just fine), it logs in and immediately i get "Volume has Crashed".

 

When trying to then create my first volume it kicks off, then slowly....one by one each drive flags up as "System Partition Failed".

 

I assume this is something to do with the controller, but wanted to see if anyone had any guidance / ideas? :smile:

 

Untitled.jpg

 

Thanks,

 

MrTPN

Edited by Guest
Link to comment
Share on other sites

Hi Folks,

 

Just to let you know that we fixed this in the end :smile:

 

We were running the P20 Firmware (20.00.00.00) on the HBA, we had to upgrade this to the latest official LSI firmware for the card P20 (20.00.04.00).

 

After this everything came up just fine, disks are all in a normal state...and as i type this its in the process of building the first volume.

 

Thanks & Hope this helps someone else.

 

MrTPN

Link to comment
Share on other sites

 Share

×
×
  • Create New...