Recommended Posts

Hi all,

 

Apologies if posting under wrong thread, admin please feel free to move.

 

I noticed after my recent installation of DSM 6.2.1 the performance is very poor compared to my previous 5.2 setup.

Not sure if it's HDD read/write related by over it seems extremely slow starting from login and browsing, ending with file transfer and usage of DSM File app.

 

Some outputs here for my hdd performance:

 

root@sin-nas01:/dev# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [raidF1]
md3 : active raid1 sdc3[3] sdd3[2]
      1948692416 blocks super 1.2 [2/2] [UU]

md2 : active raid1 sdb3[0]
      204893184 blocks super 1.2 [1/1] [U]

md1 : active raid1 sdb2[0] sdc2[1] sdd2[2]
      2097088 blocks [12/3] [UUU_________]

md0 : active raid1 sdb1[0] sdc1[1] sdd1[2]
      2490176 blocks [12/3] [UUU_________]

 

 

root@sin-nas01:/dev# hdparm -t /dev/sdd3

/dev/sdd3:
 Timing buffered disk reads: 444 MB in  3.00 seconds = 147.98 MB/sec  (<-- which is looking good)


root@sin-nas01:/dev# hdparm -t /dev/sdc3

/dev/sdc3:
 Timing buffered disk reads: 

^C  (<-- it just stops there and have to Ctrl+C to terminate)

 

I'm a noob when it comes to DSM and linux in general. Are there any well-known issues that I failed to read about and is there a way to improve performance?

 

Any advise would be much appreciated.


Thanks!

 

Edited by byallmeans
highlighted some of the key comments
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.