mene Posted January 9, 2016 Share #1 Posted January 9, 2016 (edited) Hello! I have xpenology installed on an old Toshiba laptop, with core 2 duo T7200 and intel express chipset 945gm. The problem is that I can not reboot the system. Each time I want to reboot or shut down and start again, I have to made a new xpenoboot usb. It 'sees' it in the bios and boot from it, but if I reboot again the usb is not 'seen'. I'm looking for a solution... Edited January 10, 2016 by Guest Link to comment Share on other sites More sharing options...
sbv3000 Posted January 10, 2016 Share #2 Posted January 10, 2016 this might be because your bios setting are being reset, this this thread viewtopic.php?f=2&t=3289&p=51461&hilit=bios+reset#p51461 Link to comment Share on other sites More sharing options...
mene Posted January 10, 2016 Author Share #3 Posted January 10, 2016 Thanks! Mine shuts down normally but it doesn't start, either if it is after a shut down or a reboot. When I check in bios, the usb is not in the bootable options. I have to create another bootable usb each time, on a different usb stick. Also, when the system is eventually started, I can see the bootable usb as "usbshare2". I can also map it to my windows pc. Link to comment Share on other sites More sharing options...
brantje Posted January 10, 2016 Share #4 Posted January 10, 2016 Thanks!Mine shuts down normally but it doesn't start, either if it is after a shut down or a reboot. When I check in bios, the usb is not in the bootable options. I have to create another bootable usb each time, on a different usb stick. Also, when the system is eventually started, I can see the bootable usb as "usbshare2". I can also map it to my windows pc. That you can see the drive is good. Have you tried to plug the usb stick into another port? Sometimes that works. Link to comment Share on other sites More sharing options...
mene Posted January 10, 2016 Author Share #5 Posted January 10, 2016 I've tried all three ports. Before xpenology I had freenas on the same laptop and it was working, thats why I believe it's not a hardware issue. Link to comment Share on other sites More sharing options...
Recommended Posts