iruindegi Posted January 3, 2016 Share #1 Posted January 3, 2016 I have my microserver with 3 disks and now it says that the volumen1 has beed chrased and it´s in read only mode. This is my configuration: Volumen1 => 2Tb disk Volumen2 => 5Tb disk Volumen3 => 3Tb disk what to do? every disk is a basic volume... I need to remove the volumen1 but if do this everything will work correctly? I ask because I supouse that everything is installed on volumen1.... Any help or clue? Link to comment Share on other sites More sharing options...
sbv3000 Posted January 3, 2016 Share #2 Posted January 3, 2016 if the volume has crashed but in read only mode, you should be able to access the shared folders using File Station, or remotely mount the folders using smb. If you have enough space on Vol2 or 3 then you can use file manager to copy your files to them. Then you can delete and recreate the volume, but you will lose any packages or apps installed on vol1 Link to comment Share on other sites More sharing options...
iruindegi Posted January 3, 2016 Author Share #3 Posted January 3, 2016 Now I´m backuping all the data and then I´ll try to remove the disk. It is possible? or I have to remove the volume withing diskstation? Link to comment Share on other sites More sharing options...
sbv3000 Posted January 3, 2016 Share #4 Posted January 3, 2016 if the disk hardware is ok you should be able to delete and recreate the volume. If you remove the disk vol1 will not show up any more. if you put a new disk in the volume created will be vol1 by default Link to comment Share on other sites More sharing options...
Recommended Posts