JohnyR Posted September 26, 2021 Share #1 Posted September 26, 2021 (edited) Hello, I have a question: I have Xpenology on Dell Optiplex 780, it works great, but I would like to have more drives there than, I have a 9690SA controller is on compatibility list, but it is not detected - will you help? The content of grub.cfg below: ########################################################################################## ### Only Modify here ##################################################################### ########################################################################################## ### Change Model to DS3615xs, DS3617xs or DS916+ set model=DS3617xs ### Change S/N set sn=1430ODN017597 ### Set how many network interfaces you have set netif_num=1 ### Set MAC Addresses here set mac1=A4:BA:DB:EC:C0:C5 set mac2= set mac3= set mac4= ### To set any additional variables fill in between single quotes set extra_args_quicknick='' ### To remove any modules, add between single quotes such as rmmod='ata_piix' set rmmod='' ### To add any modules, add between single quotes such as insmod='ata_piix' set insmod='3w-9xxx' ### Sets which menu item on grub you want to be default (this setting is saved automatically) set default='0' ### Sets time in seconds before system automatically boots set timeout='10' ### Sets failback option if default boot option fails set fallback='1' ########################################################################################## ### USB Section only if usb booting ###################################################### ### Set vid/pid of your usb stick ######################################################## ### http://xpenology.me/how-to-see-the-value-of-my-vid-pid-stick/ ######################## ########################################################################################## set vid=0x13FE set pid=0x6300 ########################################################################################## ### Max Supported Disks ################################################################## ### set maxdisks=48 will mean that XPEnology will now see 48 drives in DSM. ############## ### No changes to /etc.defaults/synoifno.conf needed. Changes are made during boot. ##### ### Acceptable values: 12,16,20,24,25,26,28,30,32,35,36,40,44,45,48,50,52,55,56,58,60,64 # ### default value is 12. leave blank for 12 disks. ###################################### ########################################################################################## set maxdrives=12 ########################################################################################## ### If having trouble with sata, specify how many ports you have ### put disks on port 1,2,3,4 and put SataPortMap=4 ### SataPortMap=4 means first 4 ports of 1st controler. ### SataPortMap=44 means first 4 ports of 1st controler and first 4 ports of 2nd controler. ### SataPortMap=422 means first 4 ports of 1st controler, ### first 2 ports of 2nd controler and first 2 ports of 3rd controler. ########################################################################################## set sataportmap="SataPortMap=48" ########################################################################################## ### DO NOT MODIFY ANYTHING BELOW THIS LINE ############################################### ########################################################################################## search --no-floppy --fs-uuid a2c20443-5b1c-4f69-8017-c528ccc6ca0b --set bootdrive source ($bootdrive)/.quicknick/grub-quicknick-v3.cfg Edited September 26, 2021 by JohnyR Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 27, 2021 Author Share #2 Posted September 27, 2021 admin@DS3617xs:/lib/modules$ lsmod | grep 3w 3w_sas 20250 0 3w_9xxx 32453 0 admin@DS3617xs:/lib/modules$ dmesg | grep 3ware [ 6.780226] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 6.984013] scsi6 : 3ware 9000 Storage Controller [ 6.984173] 3w-9xxx: scsi6: Found a 3ware 9000 Storage Controller at 0xf78ff000, IRQ: 16. [ 7.302285] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. Probably no 3w-9xxx.ko module, but the card is detecting! Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 29, 2021 Author Share #3 Posted September 29, 2021 Nobody, nothing, no ideas? Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 29, 2021 Author Share #4 Posted September 29, 2021 From terminal: GNU GRUB version 2.02~beta2-36ubuntu3.17 +----------------------------------------------------------------------------+ |*XPEnology DS3617xs DSM 6.1.x quicknick Baremetal | | XPEnology DS3617xs DSM 6.1.x quicknick Baremetal Reinstall | | XPEnology DS3617xs DSM 6.1.x quicknick VMWare/ESXI | | XPEnology Configuration Tool v3.0 | | | | | | | | | | | | | | | | | +----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. The highlighted entry will be executed automatically in 0s. [ 5.227541] ata4: send port disabled event [ 5.227551] ata5: send port disabled event ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ XX XX PPPPPPPP EEEEEEEE ~ ~ XX XX PP PP EE NN NN OOOOOOO LL OOOOOOO GGGGGGG Y~ ~ XXXX PPPPPPPP EE NNN NN OOOOOOO LL OOOOOOO GG GG Y~ ~ XX PP EEEEEEEE NN N NN OO OO LL OO OO GG ~ ~ XXXX PP EE NN N NN OO OO LL OO OO GG GGG ~ ~ XX XX PP EE NN NNN OOOOOOO LL OOOOOOO GG GG ~ ~ XX XX PP EEEEEEEE NN NN OOOOOOO LLLLLLL OOOOOOO GGGGGGG ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ XPEnology Boot loader presented by quicknick ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ :: START /linuxrc.syno[ BUSY ][ OK ] :: Checking hypervisor[ BUSY ][ OK ] Detected hypervisor: :: Loading module libcrc32c[ BUSY ][ OK ] :: Loading module compat[ BUSY ][ OK ] :: Loading module button[ BUSY ][ OK ] :: Loading module evdev[ BUSY ][ OK ] :: Loading module mii[ BUSY ][ OK ] :: Loading module mdio[ BUSY ][ OK ] :: Loading module pcnet32[ BUSY ][ OK ] :: Loading module dca[ BUSY ][ OK ] :: Loading module e100[ BUSY ][ OK ] :: Loading module e1000[ BUSY ][ OK ] :: Loading module e1000e[ BUSY ][ OK ] :: Loading module igb[ BUSY ][ OK ] :: Loading module ixgb[ BUSY ][ OK ] :: Loading module ixgbe[ BUSY ][ OK ] :: Loading module i40e[ BUSY ][ OK ] :: Loading module forcedeth[ BUSY ][ OK ] :: Loading module uio[ BUSY ][ OK ] :: Loading module bnx2[ BUSY ][ OK ] :: Loading module libphy[ BUSY ][ OK ] :: Loading module tg3[ BUSY ][ OK ] :: Loading module r8169[ BUSY ][ OK ] :: Loading module r8168[ BUSY ][ OK ] :: Loading module skge[ BUSY ][ OK ] :: Loading module sky2[ BUSY ][ OK ] :: Loading module alx[ BUSY ][ OK ] :: Loading module atl1[ BUSY ][ OK ] :: Loading module atl2[ BUSY ][ OK ] :: Loading module atl1c[ BUSY ][ OK ] :: Loading module atl1e[ BUSY ][ OK ] :: Loading module jme[ BUSY ][ OK ] :: Loading module be2net[ BUSY ][ OK ] :: Loading module cnic[ BUSY ][FAILED] :: Loading module bnx2x[ BUSY ][ OK ] :: Loading module cxgb[ BUSY ][ OK ] :: Loading module cxgb3[ BUSY ][ OK ] :: Loading module cxgb4[ BUSY ][ OK ] :: Loading module mlx4_core[ BUSY ][ OK ] :: Loading module mlx4_en[ BUSY ][ OK ] :: Loading module netxen_nic[ BUSY ][ OK ] :: Loading module qla3xxx[ BUSY ][ OK ] :: Loading module qlcnic[ BUSY ][ OK ] :: Loading module qlge[ BUSY ][ OK ] :: Loading module ptp_pch[ BUSY ][ OK ] :: Loading module pch_gbe[ BUSY ][ OK ] :: Loading module ata_piix[ BUSY ][ OK ] :: Loading module sg[ BUSY ][ OK ] :: Loading module scsi_transport_spi[ BUSY ][ OK ] :: Loading module mptbase[ BUSY ][ OK ] :: Loading module mptctl[ BUSY ][ OK ] :: Loading module mptscsih[ BUSY ][ OK ] :: Loading module mptsas[ BUSY ][ OK ] :: Loading module mptspi[ BUSY ][ OK ] :: Loading module mpt2sas[ BUSY ][ OK ] :: Loading module mpt3sas[ BUSY ][ OK ] :: Loading module nvme[ BUSY ][ OK ] :: Loading module megaraid_mm[ BUSY ][ OK ] :: Loading module megaraid_mbox[ BUSY ][ OK ] :: Loading module megaraid_sas[ BUSY ][ :: Loading module megaraid[ BUSY ][ OK ] :: Loading module aacraid[ BUSY ][ OK ] :: Loading module aic94xx[ BUSY ][ OK ] :: Loading module arcmsr[ BUSY ][ OK ] :: Loading module mvsas[ BUSY ][ OK ] :: Loading module 3w-9xxx[ BUSY ][ OK ] :: Loading module 3w-sas[ BUSY ][ OK ] :: Loading module hptiop[ BUSY ][ OK ] :: Loading module BusLogic[ BUSY ][ OK ] :: Loading module isci[ BUSY ][ OK ] :: Loading module vmw_pvscsi[ BUSY ][ OK ] :: Loading module vmxnet3[ BUSY ][ OK ] :: Loading module usb-common[ BUSY ][ OK ] :: Loading module usbcore[ BUSY ][ OK ] :: Loading module ehci-hcd[ BUSY ][ OK ] :: Loading module ehci-pci[ BUSY ][ OK ] :: Loading module uhci-hcd[ BUSY ][ OK ] :: Loading module ohci-hcd[ BUSY ][ OK ] :: Loading module xhci-hcd[ BUSY ][ OK ] :: Loading module usbnet[ BUSY ][ OK ] :: Loading module ax88179_178a[ BUSY ][ OK ] :: Loading module asix[ BUSY ][ OK ] :: Loading module r8152[ BUSY ][ OK ] :: Loading module mcs7830[ BUSY ][ OK ] :: Loading module rtl8150[ BUSY ][ OK ] :: Loading module cx82310_eth[ BUSY ][ OK ] :: Loading module plusb[ BUSY ][ OK ] :: Loading module ipg[ BUSY ][ OK ] :: Unloading module mpt2sas[ BUSY ][ OK ] :: Loading module mpt2sas[ BUSY ][ OK ] :: Re-scanning disks[ BUSY ][ 7.629803] md: invalid raid superblock magic on5 [ 7.697860] md: invalid raid superblock magic on sdb5 [ 7.772691] md: invalid raid superblock magic on sdc5 [ 7.778379] md0: Failed to send sync event: (sync type: resync, fin [ OK ] :: Checking GRUB boot options[ BUSY ][ OK ] Insert Marvell 1475 SATA controller driver Insert basic USB modules... Insert net driver(Mindspeed only)... :: Starting /usr/syno/bin/synocfgen...[ BUSY ][ OK ] /usr/syno/bin/synocfgen returns 0 All disk ready or timeout execeed Partition Version=8 /sbin/e2fsck exists, checking /dev/md0... /sbin/e2fsck -pvf returns 1 Mounting /dev/md0 /tmpRoot :: Checking upgrade file[ BUSY ][ OK ] Begin upgrade procedure No upgrade file exists End upgrade procedure ------------upgrade Begin upgrade procedure No upgrade file exists End upgrade procedure ============upgrade Wait 2 seconds for synology manufactory device :: Detecting synoboot :: synoboot not detected[ BUSY ][FAILED] Wed Sep 29 18:00:14 UTC 2021 /dev/md0 /tmpRoot ext4 rw,relatime,journal_checksum,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=2961716k,nr_inodes=740429,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno executed successfully. Post init :: Pre-mounting /dev/md0 to /tmpRoot[ BUSY ][ OK ] :: Max Supported Disks in DSM is currently set to 12![ BUSY ][ OK ] maxdisks=12 internalportcfg=0xfff esataportcfg=0xff000 usbportcfg=0x300000 :: Updating a8293.ko[ BUSY ][FAILED] ==================== start udevd ==================== ===== trigger device plug event ===== [ 28.905507] mlx_compat: exports duplicate symbol backport_dependency_symbol ) [ 34.697066] BTRFS: has skinny extents Quote Link to comment Share on other sites More sharing options...
pocopico Posted September 29, 2021 Share #5 Posted September 29, 2021 Try the two following commandsand post the output : lspci -k fdisk -l lsmod Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 29, 2021 Author Share #6 Posted September 29, 2021 admin@DS3617xs:~$ lspci -k 0000:00:00.0 Class 0600: Device 8086:2e10 (rev 03) Subsystem: Device 1028:0420 0000:00:01.0 Class 0604: Device 8086:2e11 (rev 03) Kernel driver in use: pcieport 0000:00:02.0 Class 0300: Device 8086:2e12 (rev 03) Subsystem: Device 1028:0420 0000:00:02.1 Class 0380: Device 8086:2e13 (rev 03) Subsystem: Device 1028:0420 0000:00:03.0 Class 0780: Device 8086:2e14 (rev 03) Subsystem: Device 1028:0420 0000:00:03.2 Class 0101: Device 8086:2e16 (rev 03) Subsystem: Device 1028:0420 0000:00:03.3 Class 0700: Device 8086:2e17 (rev 03) Subsystem: Device 1028:0420 Kernel driver in use: serial 0000:00:19.0 Class 0200: Device 8086:10de (rev 02) Subsystem: Device 1028:0276 Kernel driver in use: e1000e 0000:00:1a.0 Class 0c03: Device 8086:3a67 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: uhci_hcd 0000:00:1a.1 Class 0c03: Device 8086:3a68 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: uhci_hcd 0000:00:1a.2 Class 0c03: Device 8086:3a69 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: uhci_hcd 0000:00:1a.7 Class 0c03: Device 8086:3a6c (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: ehci-pci 0000:00:1b.0 Class 0403: Device 8086:3a6e (rev 02) Subsystem: Device 1028:0420 0000:00:1c.0 Class 0604: Device 8086:3a70 (rev 02) Kernel driver in use: pcieport 0000:00:1c.1 Class 0604: Device 8086:3a72 (rev 02) Kernel driver in use: pcieport 0000:00:1d.0 Class 0c03: Device 8086:3a64 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: uhci_hcd 0000:00:1d.1 Class 0c03: Device 8086:3a65 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: uhci_hcd 0000:00:1d.2 Class 0c03: Device 8086:3a66 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: uhci_hcd 0000:00:1d.7 Class 0c03: Device 8086:3a6a (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: ehci-pci 0000:00:1e.0 Class 0604: Device 8086:244e (rev a2) 0000:00:1f.0 Class 0601: Device 8086:3a14 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: lpc_ich 0000:00:1f.2 Class 0106: Device 8086:3a02 (rev 02) Subsystem: Device 1028:0420 Kernel driver in use: ahci 0000:00:1f.3 Class 0c05: Device 8086:3a60 (rev 02) Subsystem: Device 1028:0420 0000:01:00.0 Class 0104: Device 13c1:1005 (rev 01) Subsystem: Device 13c1:1005 Kernel driver in use: 3w-9xxx 0001:00:02.0 Class 0000: Device 8086:6f04 (rev ff) 0001:00:02.2 Class 0000: Device 8086:6f06 (rev ff) 0001:00:03.0 Class 0000: Device 8086:6f08 (rev ff) 0001:00:03.2 Class 0000: Device 8086:6f0a (rev ff) 0001:00:1f.0 Class 0000: Device 8086:8c54 (rev ff) 0001:00:1f.3 Class 0000: Device 8086:8c22 (rev ff) 0001:06:00.0 Class 0000: Device 1b4b:1475 (rev ff) 0001:08:00.0 Class 0000: Device 1b4b:9235 (rev ff) 0001:09:00.0 Class 0000: Device 8086:1533 (rev ff) 0001:0c:00.0 Class 0000: Device 8086:1533 (rev ff) 0001:0d:00.0 Class 0000: Device 8086:1533 (rev ff) Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 29, 2021 Author Share #7 Posted September 29, 2021 admin@DS3617xs:~$ fdisk -l Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0x9d9ef835 Device Boot Start End Sectors Size Id Type /dev/sda1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sda2 4982528 9176831 4194304 2G fd Linux raid autodetect /dev/sda3 9437184 1953511007 1944073824 927G f W95 Ext'd (LBA) /dev/sda5 9453280 1953318239 1943864960 926.9G fd Linux raid autodetect Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0x308f308e Device Boot Start End Sectors Size Id Type /dev/sdb1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sdb2 4982528 9176831 4194304 2G fd Linux raid autodetect /dev/sdb3 9437184 1953511007 1944073824 927G f W95 Ext'd (LBA) /dev/sdb5 9453280 1953318239 1943864960 926.9G fd Linux raid autodetect Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0xeadc6299 Device Boot Start End Sectors Size Id Type /dev/sdc1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sdc2 4982528 9176831 4194304 2G fd Linux raid autodetect /dev/sdc3 9437184 1953511007 1944073824 927G f W95 Ext'd (LBA) /dev/sdc5 9453280 1953318239 1943864960 926.9G fd Linux raid autodetect Disk /dev/md0: 2.4 GiB, 2549940224 bytes, 4980352 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/md1: 2 GiB, 2147418112 bytes, 4194176 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram0: 1.7 GiB, 1847590912 bytes, 451072 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram1: 1.7 GiB, 1847590912 bytes, 451072 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/md2: 1.8 TiB, 1990515621888 bytes, 3887725824 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 65536 bytes / 131072 bytes Disk /dev/mapper/vg1000-lv: 1.8 TiB, 1990511820800 bytes, 3887718400 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 65536 bytes / 131072 bytes GPT PMBR size mismatch (204799 != 30965759) will be corrected by w(rite). Disk /dev/synoboot: 14.8 GiB, 15854469120 bytes, 30965760 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 6C695D1F-E348-4DE0-ACBB-A5ABF7A37920 Device Start End Sectors Size Type /dev/synoboot1 2048 32767 30720 15M EFI System /dev/synoboot2 32768 83967 51200 25M Linux filesystem /dev/synoboot3 83968 92159 8192 4M BIOS boot /dev/synoboot4 92160 245726 153567 75M Linux filesystem Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 29, 2021 Author Share #8 Posted September 29, 2021 admin@DS3617xs:~$ lsmod Module Size Used by snd_usb_hiface 7764 0 snd_pcm_oss 21194 0 snd_mixer_oss 13663 1 snd_pcm_oss snd_usb_audio 115176 0 snd_pcm 67244 3 snd_pcm_oss,snd_usb_hiface,snd_usb_audio snd_timer 17654 1 snd_pcm snd_hwdep 5652 1 snd_usb_audio snd_usbmidi_lib 17748 1 snd_usb_audio snd_rawmidi 17110 1 snd_usbmidi_lib snd_seq_device 4628 1 snd_rawmidi snd 48702 10 snd_pcm_oss,snd_usb_hiface,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_mixer_oss snd_page_alloc 6618 1 snd_pcm soundcore 4847 1 snd bridge 53853 0 stp 1549 1 bridge aufs 178725 0 macvlan 8638 0 veth 4263 0 xt_conntrack 3129 5 xt_addrtype 2621 1 ipt_MASQUERADE 1634 1 xt_REDIRECT 1534 0 xt_nat 1769 0 iptable_nat 2582 1 nf_nat_ipv4 3240 1 iptable_nat nf_nat 11621 5 ipt_MASQUERADE,nf_nat_ipv4,xt_nat,xt_REDIRECT,iptable_nat cifs 244680 0 udf 79072 0 isofs 32063 0 loop 16591 0 iscsi_target_mod 219211 1 target_core_ep 49076 2 target_core_file 30790 1 target_core_iblock 19742 1 target_core_mod 526846 13 target_core_iblock,iscsi_target_mod,target_core_ep,target_core_file syno_extent_pool 1287642 0 rodsp_ep 73082 2 syno_extent_pool,target_core_file hid_generic 1113 0 usbhid 25223 0 hid 82276 2 hid_generic,usbhid usblp 10474 0 usb_storage 47709 0 xt_mac 947 0 xt_geoip 3022 0 compat_xtables 2140 0 nf_conntrack_ipv6 6163 2 nf_defrag_ipv6 22249 1 nf_conntrack_ipv6 ip6table_filter 1324 1 ip6_tables 15488 1 ip6table_filter xt_recent 8336 0 xt_iprange 1504 0 xt_limit 1777 5 xt_state 1095 0 xt_tcpudp 2271 8 xt_multiport 1622 0 xt_LOG 12036 0 nf_conntrack_ipv4 11196 4 nf_defrag_ipv4 1203 1 nf_conntrack_ipv4 nf_conntrack 52176 8 ipt_MASQUERADE,nf_nat,xt_state,nf_nat_ipv4,xt_conntrack,iptable_nat,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 1320 1 ip_tables 14851 2 iptable_filter,iptable_nat x_tables 15256 19 ip6table_filter,xt_iprange,xt_recent,ip_tables,xt_tcpudp,ipt_MASQUERADE,compat_xtables,xt_geoip,xt_limit,xt_state,xt_conntrack,xt_LOG,xt_mac,xt_nat,xt_multiport,iptable_filter,xt_REDIRECT,ip6_tables,xt_addrtype broadwell_synobios 45979 0 exfat 116384 0 btrfs 870258 1 synoacl_vfs 17182 1 zlib_deflate 20444 1 btrfs hfsplus 91202 0 md4 3553 0 hmac 2689 0 atlantic 54926 0 tn40xx 27765 0 i2c_algo_bit 5120 0 fuse 75818 0 vfat 10143 0 fat 50319 1 vfat glue_helper 3993 0 lrw 3269 0 gf128mul 5338 1 lrw ablk_helper 1676 0 arc4 1832 0 cryptd 6956 1 ablk_helper ecryptfs 78069 1 btrfs sha512_generic 4936 0 sha256_generic 9620 0 sha1_generic 2198 0 ecb 1841 0 aes_x86_64 7295 0 authenc 6172 0 des_generic 15843 0 ansi_cprng 3732 0 cts 3928 0 md5 2241 0 cbc 2504 0 cpufreq_conservative 6232 0 cpufreq_powersave 918 0 cpufreq_performance 922 2 cpufreq_ondemand 8013 0 acpi_cpufreq 6614 0 mperf 1067 1 acpi_cpufreq processor 26076 1 acpi_cpufreq thermal_sys 17649 1 processor cpufreq_stats 2849 0 freq_table 2372 3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq dm_snapshot 26058 0 crc_itu_t 1259 1 udf crc_ccitt 1259 0 quota_v2 3711 0 quota_tree 7450 1 quota_v2 psnap 1645 0 p8022 971 0 llc 3489 4 stp,p8022,psnap,bridge sit 14418 0 tunnel4 2053 1 sit ip_tunnel 11448 1 sit ipv6 300785 75 sit,rodsp_ep,nf_defrag_ipv6,nf_conntrack_ipv6 zram 7881 2 etxhci_hcd 84778 0 mv14xx 533785 0 mpt2sas 238978 0 ipg 15837 0 plusb 1403 0 cx82310_eth 3806 0 rtl8150 9215 0 mcs7830 5628 0 r8152 55581 0 asix 20330 0 ax88179_178a 12012 0 usbnet 17781 5 asix,plusb,mcs7830,ax88179_178a,cx82310_eth xhci_hcd 84124 0 ohci_hcd 20680 0 uhci_hcd 22419 0 ehci_pci 3560 0 ehci_hcd 39388 1 ehci_pci usbcore 174990 22 asix,etxhci_hcd,r8152,plusb,usblp,uhci_hcd,snd_usb_hiface,snd_usb_audio,rtl8150,mcs7830,usb_storage,ohci_hcd,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd,cx82310_eth usb_common 1544 1 usbcore vmxnet3 36741 0 vmw_pvscsi 15239 0 isci 94664 0 BusLogic 21185 0 hptiop 15612 0 3w_sas 20250 0 3w_9xxx 32453 0 mvsas 53061 0 arcmsr 27480 0 aic94xx 103131 0 aacraid 79192 0 megaraid 37746 0 megaraid_sas 72622 0 megaraid_mbox 27683 0 megaraid_mm 7552 1 megaraid_mbox nvme 37347 0 mpt3sas 281913 0 mptspi 12916 0 mptsas 38463 0 mptscsih 18705 2 mptsas,mptspi mptctl 26101 0 mptbase 61898 4 mptctl,mptsas,mptspi,mptscsih scsi_transport_spi 19098 1 mptspi sg 24881 0 ata_piix 23344 0 pch_gbe 33267 0 ptp_pch 5646 1 pch_gbe qlge 77290 0 qlcnic 227416 0 qla3xxx 36545 0 netxen_nic 96660 0 mlx4_en 65036 0 mlx4_core 161746 1 mlx4_en cxgb4 115163 0 cxgb3 131226 0 cxgb 64094 0 bnx2x 1417616 0 be2net 82925 0 jme 34105 0 atl1e 27956 0 atl1c 34124 0 atl2 23196 0 atl1 30566 0 alx 25873 0 sky2 46798 0 skge 29459 0 r8168 511915 0 r8169 31308 0 tg3 171902 0 libphy 18061 1 asix bnx2 73633 0 uio 7600 0 forcedeth 54255 0 i40e 286303 0 ixgbe 267489 0 ixgb 37011 0 igb 175037 0 e1000e 169017 0 e1000 99699 0 e100 28629 0 dca 4512 2 igb,ixgbe pcnet32 30594 0 mdio 3293 4 alx,cxgb,bnx2x,cxgb3 mii 3763 11 ipg,jme,e100,asix,atl1,r8152,mcs7830,usbnet,pch_gbe,pcnet32,ax88179_178a evdev 8880 4 button 4440 0 compat 4329 0 libcrc32c 898 1 bnx2x el000 14864 0 Quote Link to comment Share on other sites More sharing options...
pocopico Posted September 29, 2021 Share #9 Posted September 29, 2021 PCI Card is identified and module is loaded. I really don’t know what the problem is. Do you see the disks that are attached to your 3wxxx HBA ? Quote Link to comment Share on other sites More sharing options...
JohnyR Posted September 30, 2021 Author Share #10 Posted September 30, 2021 One 128GB SSD drive is connected to the 3ware controller and is visible in the card's bios Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.