brantje Posted December 22, 2015 Share #1 Posted December 22, 2015 DISCLAIMER! I’ll take no responsibility for any loss of data or any other problem caused by following this tutorial. Reinstall DSM (eg 5.2-5592) without losing the data on Volume: 01. Enable SSH if it`s not & connect to SYNOLOGY 02. Open & edit the file \etc.defaults\VERSION 03. Exchange the data with one of previous ver.: majorversion="5" minorversion="2" buildphase="0" buildnumber="5565" builddate="2012/12/05" 04. Save & Exit 05. Restart Synology 06. Launch Synology Assistant 07. Click 'Search' 08. If you've done everything correctly you'll see a new 'DiskStation' has been found. 09. Disconnect the USB flash drive from the computer for this next step 10. Right-click the new 'DiskStation' and choose 'Install' 11. Browse and select the same version (5.2-5592.pat) which U already running 12. Choose a Name for the DiskStation, a new default admin password and IP configuration 13. After installation is complete the DiskStation will reboot automatically. 14. Power it OFF manually now 15. Isert the same USB Flash drive (5.2-5592.img) back into PC 16. Power on PC & DSM will boot normally 17. In Synology Assistant click 'Search' again 18. Depending on the name and network config you chose during installation you will see now a DiskStation has been found with the NAME you chose. Link to comment Share on other sites More sharing options...
Recommended Posts