Jump to content
XPEnology Community

3D Drucker wird am USB Anschluss nicht richtig erkannt


Fotokasperl

Recommended Posts

Hallo Zusammen,

 

ich bin so langsam am verzweifeln hier. Ich versuche nun seit Tagen meine 3D Drucker in die NAS Umgebung einzubinden. Ziel des ganzen, soll sein diese im Docker Container mit Octoprint anzusteuern. Aktuell habe ich 2 unterschiedliche Modelle, welche ich einbinden möchte. Drucker #1 lies sich beim Test problemlos verbinden und wurde auch als USB Gerät erkannt. Ein Test im Docker Container führte ebenfalls zum gewünschten Ergebnis. Leider sieht es bei meinem Drucker #2 nicht so einfach aus. Dieser meldet sich auf der NAS lediglich als Openmoko, Inc an und erhält keinen USB Port zugeteilt. 

 

Habt ihr eine zündende Idee wie ich es hinbekommen könnte, dass der Drucker von der DS erkannt wird?

 

Anbei noch Auszüge aus der aktuellen Verbindung:

 

Auszug aus dmesg:
 


[69443.021775] usb 1-7: new full-speed USB device number 25 using xhci_hcd
[69443.158832] usb-storage 1-7:1.2: USB Mass Storage device detected
[69443.159090] scsi host29: usb-storage 1-7:1.2
[69444.161456] scsi 29:0:0:0: Direct-Access     Marlin   SDCard 01                1.0  PQ: 0 ANSI: 0 CCS
[69444.161757] sd 29:0:0:0: Attached scsi generic sg4 type 0
[69444.161998] sd 29:0:0:0: [sdq] 7745536 512-byte logical blocks: (3.97 GB/3.69 GiB)
[69444.162246] sd 29:0:0:0: [sdq] Write Protect is off
[69444.162247] sd 29:0:0:0: [sdq] Mode Sense: 03 00 00 00
[69444.162464] sd 29:0:0:0: [sdq] Asking for cache data failed
[69444.168098] sd 29:0:0:0: [sdq] Assuming drive cache: write through
[69444.678564]  sdq: sdq3
[69444.678569] sdq: p3 start 3160236353 is beyond EOD, enabling native capacity
[69445.244573]  sdq: sdq3
[69445.244576] sdq: p3 start 3160236353 is beyond EOD, truncated
[69445.246039] sd 29:0:0:0: [sdq] Attached SCSI removable disk

 

lsusb -t

 

root@Diskstation:/dev# lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
    |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 7: Dev 25, If 0, Class=Communications, Driver=, 12M
    |__ Port 7: Dev 25, If 1, Class=CDC Data, Driver=, 12M
    |__ Port 7: Dev 25, If 2, Class=Mass Storage, Driver=usb-storage, 12M

 

lsusb -v

 

Bus 001 Device 025: ID 1d50:6029 OpenMoko, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1d50 OpenMoko, Inc.
  idProduct          0x6029
  bcdDevice            1.00
  iManufacturer           1 marlinfw.org
  iProduct                2 Marlin USB Device
  iSerial                 3 0FFFF014AF6998C05E40CFCBF50020C3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           98
    bNumInterfaces          3
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      0 None
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC ACM:
        bmCapabilities       0x06
          sends break
          line coding and serial state
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval              16
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

 

ls -ltr /dev | tail

 

root@Diskstation:/dev# ls -ltr /dev | tail
drwx--x--x 3 root   root        60 Aug 29 03:10 virtualization
crw-rw-rw- 1 root   root    5,   0 Aug 29 03:11 tty
crwxrwxrwx 1 root   root    4,  65 Aug 29 21:46 ttyS1
drwxrwxrwt 2 root   root        80 Aug 29 22:21 shm
drwxr-xr-x 2 root   root      1180 Aug 29 22:26 block
drwxr-xr-x 2 root   root       160 Aug 29 22:26 bsg
brw------- 1 root   root   65,   0 Aug 29 22:26 sdq
crw------- 1 root   root   21,   4 Aug 29 22:26 sg4
drwxr-xr-x 2 root   root      1280 Aug 29 22:26 char
crw-rw-rw- 1 root   root    5,   2 Aug 29 22:42 ptmx

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...