Error When connecting 2 Drive to SATA PCie Controller

[DrHentai]

Hello Guys !

Hope someone can help me here.

I installed a SATA PCie Controller in my NAS system when i only plug in 1 Drive everything is working fine but when im plugging in an 2 Drive the system dosent boot/shows up in synology helper etc.

 

Some information:

SATA PCie Controller: ziyituod pcie sata card 4 port Amazon Link

MB:h97m anniversary

Loader:DS3615xs_DSM6.2-23739_MBR

6 Disks are installed on the onboard SATA ports

 

Grub cfg:

set vid=0xFFFF
set pid=0x5678
set sn=1130LWN021954
set mac1=001b21bd1cfd
set mac2=d05099377452
set rootdev=/dev/md0
set netif_num=1
set extra_args_3615=''
#set extra_args_3615='earlycon=uart8250,io,0x3f8,115200n8 earlyprintk loglevel=15'

set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1'

set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=10 SasIdxMap=0'

 

 

Let me know if i forgot something !

[flyride]

Port multiplier-based controllers are not supported.  You'll have to find an appropriate controller.

[DrHentai]

OK good to know thank you i just wonderd why it shows up 1 drive so i thought maybe a config error

 

[jensmander]

The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.