computech1228 Posted December 1, 2015 Share #1 Posted December 1, 2015 Hey all, Wanted to reach out to the community and see what is the best way to upgrade from 5.1-5022 to 5.2-5644.1 or if any one know of any recommendations or caveats to watch out for. Thanks! Link to comment Share on other sites More sharing options...
MarsManden Posted December 2, 2015 Share #2 Posted December 2, 2015 Don't upgrade to 5.2-5644 - not safe yet. Stay on 5.2-5592 for now. Link to comment Share on other sites More sharing options...
computech1228 Posted December 3, 2015 Author Share #3 Posted December 3, 2015 thanks for the heads up, any recommendations on upgrading to 5.2 ? Link to comment Share on other sites More sharing options...
seg1000 Posted December 4, 2015 Share #4 Posted December 4, 2015 Wooow ! I came from 5.1-5055 to 5.2-5592... It has took me about 3 hours to find the correct procedure. I tried to upgrade directly to the 5.2-5644 version of the 28.10.2015 but it didn't work for me. I had to downgrade using the tip: login to the console of your xpenology server cd /etc.defaults vi VERSION I replaced the 5644 version to 5565. I wrote the XPENOBOOT 5592.2 onto my USB stick with WIN32DiskImager I rebooted my N54-L and choosed "Install/Upgrade" I launched Synology Assistant and I think I have found what was wrong with my method: I had to click on connect, not on install. This way, my browser opens, I choose installation , then migration, I point to the correct 5592 .pat file and so on... The server reboots, and then, the synology splash screen appears... yeaaaah !!! That's all. I was very frightened not to see back my samba shares and my volumes but finally it's OK ! For you, you just need to install the 5592 version on your key and follow my method (not really mine, of course) with synology assistant... Hope this will be helpful for you ! I hope you will understand me, I'm french ;o) Link to comment Share on other sites More sharing options...
MarsManden Posted December 4, 2015 Share #5 Posted December 4, 2015 Use this guide - just replace 5565 with 5592. It really is fairly simple. http://xpenology.me/how-to-update-to-dsm-5-2-5565/ Link to comment Share on other sites More sharing options...
ZAR Posted December 4, 2015 Share #6 Posted December 4, 2015 sorry for my bad English I want to update DSM on my HP N54L DSM 4.3-3827-8 (Trantor) to 5.2 last stable. Maby 5.2-5592.2 But i wans safe a structure hdd's HDD6 - volume1 - active default disk, all soft silent by default installing withiout change settings. HDD 1,2 - volume2 HDD 3,4 - volume3 HDD 5 - volume4 I reinstall the system to another N54L with the same structure and has appointed DSM make everything is different all crtuctura is changed HDD 1,2 - volume1 and HDD1 - defaul drive to install software HDD 3,4 - volume2 HDD 5 - volume3 HDD6 - volume4 How i can safe all ctructure? Thx Link to comment Share on other sites More sharing options...
Recommended Posts