Jump to content
XPEnology Community

RedPill - the new loader for 6.2.4 - Discussion

ThorGroup

By ThorGroup
in Developer Discussion Room

 Share

Recommended Posts

pigr8 Super Member

pigr8

Posted
Posted (edited) 
[   10.841393] mpt2sas version 20.00.00.00 loaded
[   10.843258] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (6116776 kB)
[   10.915328] mpt2sas0: MSI-X vectors supported: 1, no of cores: 4, max_msix_vectors: -1
[   10.915343] mpt2sas 0000:0b:00.0: irq 73 for MSI/MSI-X
[   10.916309] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 73
[   10.916313] mpt2sas0: iomem(0x00000000fd3f0000), mapped(0xffffc90008240000), size(65536)
[   10.916315] mpt2sas0: ioport(0x0000000000005000), size(256)
[   11.033413] mpt2sas0: Allocated physical memory: size(7445 kB)
[   11.033417] mpt2sas0: Current Controller Queue Depth(3305), Max Controller Queue Depth(3432)
[   11.033419] mpt2sas0: Scatter Gather Elements per IO(128)
[   11.092179] mpt2sas0: LSISAS2008: FWVersion(16.00.00.00), ChipRevision(0x03), BiosVersion(00.00.00.00)
[   11.092186] mpt2sas0: Dell 6Gbps SAS HBA: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1C)
[   11.092188] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[   11.092347] mpt2sas0: sending port enable !!
[   12.570322] mpt2sas0: host_add: handle(0x0001), sas_addr(0x590b11c027f7ff00), phys(8)
[   20.174174] mpt2sas0: port enable: SUCCESS
[   20.180805] mpt3sas version 01.100.01.00 loaded

 

btw mpt2sas.ko from dsm 6.2.3 is version 20.0 like the stock from 7.0, @pocopico version is 14.1 so i dont know if this makes any difference 😕

this is dsm 7.0.1 with the compiled drivers:
  

:: Loading kernel modules from extensions ...
Checking if kmods fo[    2.011789] tsc: Refined TSC clocksource calibration: 2394.555 MHz
[    2.013191] Switching to clocksource tsc
r pocopico.mpt2sas should run using check-mpt2sas.sh script
Loading module MPT 2 SAS -> [    2.018163] mpt2sas version 14.100.00.00 loaded
Module MPT 2 SAS is not loaded
Loading kmod #[    2.021050] scsi1 : Fusion MPT SAS Host
0 "mpt2sas.ko" for pocopico.mpt2sas (args: )
[    2.026469] mpt2sas0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (2022888 kB)
[    2.027993] mpt2sas 0000:13:00.0: irq 73 for MSI/MSI-X
[    2.029787] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 73
[    2.030785] mpt2sas0: iomem(0x00000000fd2f0000), mapped(0xffffc90008360000), size(65536)
[    2.032785] mpt2sas0: ioport(0x0000000000006000), size(256)
[    2.148889] mpt2sas0: Allocated physical memory: size(4938 kB)
[    2.150281] mpt2sas0: Current Controller Queue Depth(3307), Max Controller Queue Depth(3432)
[    2.150888] mpt2sas0: Scatter Gather Elements per IO(128)
[    2.210539] mpt2sas0: LSISAS2008: FWVersion(16.00.00.00), ChipRevision(0x03), BiosVersion(00.00.00.00)
[    2.211656] mpt2sas0: Dell 6Gbps SAS HBA: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1C)
[    2.212327] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[    2.215030] mpt2sas0: sending port enable !!
[    2.221631] mpt2sas0: host_add: handle(0x0001), sas_addr(0x590b11c027f7ff00), phys(8)
[    2.228122] scsi 1:0:0:0: Direct-Access     WDC      WD20PURZ-85GU6Y0         0A80 PQ: 0 ANSI: 6
[    2.229456] scsi 1:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221103000000), phy(3), device_name(0x50014ee20f84b83c)
[    2.229935] scsi 1:0:0:0: SATA: enclosure_logical_id(0x590b11c027f7ff00), slot(0)
[    2.230942] scsi 1:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    2.232803] scsi 1:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    2.235525] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.236969] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.238935] mpt2sas0: port enable: SUCCESS

 

Edited by pigr8
ct85msi Regular Member

ct85msi

Posted
Posted (edited)

Offtopic, there were some questions why someone would want 10 Gbps networking...well Digi ISP (RCA-RDS) Romania announced new subscriptions for 10 and 2.5 GBps. 10 Gbps costs 10.11 EUR/11.72 USD(50 RON) and 2.5 Gbps costs 9.10 EUR/10.55 USD (45 RON). That is for FTTH , fiber to the home, no need for business subscription. So...I guess 10 Gbps is the new standard, or ar least 2.5 Gbps.

 

https://www.digi.ro/anunturi/digi-lanseaza-internetul-de-10-gbps-fiberlink-10-g-cel-mai-rapid-internet-din-romania-29465

 

We need to push 10 Gbps cards compatibility.

Edited by ct85msi
  • Haha 1
  • Sad 1
Schyzo Newbie

Schyzo

Posted
Posted
Il y a 7 heures, WiteWulf a dit :

This has been covered a few times in this thread. You need to mark the first partition as "active" using something like fdisk. The Gen8 BIOS is a bit weird and needs this to be able to boot from USB sticks.

Thanks for your reply, but it dont solve the problem.

I'll be waiting like others members ;)

Thx

WiteWulf Super Member

WiteWulf

Posted
Posted
3 minutes ago, Schyzo said:

Thanks for your reply, but it dont solve the problem.

I'll be waiting like others members ;)

Thx

Weird, works fine for me once I mark partition 1 as active. Are you putting it in the same USB port that your working Jun's bootloader stick was booting from? The rear USB definitely don't support booting and I'm not sure about the front ones.

WiteWulf Super Member

WiteWulf

Posted
Posted
35 minutes ago, ct85msi said:

Offtopic, there were some questions why someone would want 10 Gbps networking...well Digi ISP (RCA-RDS) Romania announced new subscriptions for 10 and 2.5 GBps. 10 Gbps costs 10.11 EUR/11.72 USD(50 RON) and 2.5 Gbps costs 9.10 EUR/10.55 USD (45 RON). That is for FTTH , fiber to the home, no need for business subscription. So...I guess 10 Gbps is the new standard, or ar least 2.5 Gbps.

 

https://www.digi.ro/anunturi/digi-lanseaza-internetul-de-10-gbps-fiberlink-10-g-cel-mai-rapid-internet-din-romania-29465

 

We need to push 10 Gbps cards compatibility.

 

Pardon my language, but fuuuuuuuuuuuuuuck 😮

 

10 Euros a month for 10Gb broadband 🤯

stefauresi Advanced Member

stefauresi

Posted
Posted (edited)
il y a 2 minutes, WiteWulf a dit :

 

Pardon my language, but fuuuuuuuuuuuuuuck 😮

 

10 Euros a month for 10Gb broadband 🤯

37€ in France for 10Gb 😉

Edited by stefauresi
ct85msi Regular Member

ct85msi

Posted
Posted (edited)

no, there was fiber to the building since 2003 maybe, in a block with apartments there was fiber and a switch where that fiber entered. On the individual apartment, from that switch you got UTP.  Fiber to the home is from ~ 2014. They work with ZTE and Huawei ONTs.

 

That was a big jump from EOC with fiber directly in the buildings...

 

Now the smallest subscription is fiberlink 500 Mbps 6 EUR ... there is nothing under.

Edited by ct85msi
  • Haha 1
nemesis122 Super Member

nemesis122

Posted
Posted (edited)

i pay for  1000mbit down and 100 mbit up 100 chf in this case 100 Dollar per month but when is available i can have 10 gbit up down for 99 chf but is  not available here :-(

Edited by nemesis122
nemesis122 Super Member

nemesis122

Posted
Posted (edited)

The best is in switzerland you can download nearly everything only russia is better there you can download and upload nearly everything🤣

Edited by nemesis122
paro44 Junior Member

paro44

Posted
Posted
2 hours ago, Schyzo said:

Thanks for your reply, but it dont solve the problem.

I'll be waiting like others members ;)

Thx

I use Win32DiskImager for writing .img-file to USB-drive. Easy to use, the drive is bootable.

 The Gen8 has no Intel network card, right? Try it with an Intel card.

paro44 Junior Member

paro44

Posted
Posted
10 hours ago, coint_cho said:

I just have an ASUS P5G41T-M LX

With ICH7 it is nearly the same as my test nas SS4200, so I would say it should work. But your network is from Atheros, maybe the driver is missing. Driver extension may work?

T-REX-XP Super Member

T-REX-XP

Posted
Posted
1 hour ago, nemesis122 said:

i pay for  1000mbit down and 100 mbit up 100 chf in this case 100 Dollar per month but when is available i can have 10 gbit up down for 99 chf but is  not available here :-(

I pay 300 uah(12$) for 1000mbit. Its pretty small price for this speed in Ukraine))

Just wanna ask, which router should be for 2.5 or 5gbp ? 

Now I'm using custom pfsense based router on j3455.

Schyzo Newbie

Schyzo

Posted
Posted
Il y a 3 heures, WiteWulf a dit :

Weird, works fine for me once I mark partition 1 as active. Are you putting it in the same USB port that your working Jun's bootloader stick was booting from? The rear USB definitely don't support booting and I'm not sure about the front ones.

Yes, I used the same USB port and tried the rear too.

On startup, we dont need keyboard to enter or other I suppose, cause I never wired a screen on the server. Fake hope inside 😁

Thanks ;)

buggy25200 Junior Member

buggy25200

Posted
Posted (edited)

Hello,

On virtualbox and DS918+ 7 and 7.1, I boot with no link  up, it seems virtio has no effect on kernel > 4 and virtualbox, but it works on proxmox !  did you have this same observation ?

So I have tried using module made by @pocopicoe1000, and it works great ! Thx to you.

I also tried, your e1000 module 3.10.108 with ds3615xs, I do not know why ! Just I can ... so ...   But it causes kernel panic on every boot.

I therefore allow myself to warn testers : be careful and try modules one by one to find the one that works and the one that doesn't, some modules will pose problem.

 

 

Edited by buggy25200
pocopico Guru Master

pocopico

Posted
Posted (edited)
1 hour ago, buggy25200 said:

Hello,

On virtualbox and DS918+ 7 and 7.1, I boot with no link  up, it seems virtio has no effect on kernel > 4 and virtualbox, but it works on proxmox !  did you have this same observation ?

So I have tried using module made by @pocopicoe1000, and it works great ! Thx to you.

I also tried, your e1000 module 3.10.108 with ds3615xs, I do not know why ! Just I can ... so ...   But it causes kernel panic on every boot.

I therefore allow myself to warn testers : be careful and try modules one by one to find the one that works and the one that doesn't, some modules will pose problem.

 

 


I’ve tested all modules, but testing during boot and testing after that from what I’ve noticed is totally different. Also testing when devices do exist is also a different story. Compiled modules are there for testing, if they do not work for you then you can still compile them yourself and retry.

 

This is the only reason for me to not release drivers as extensions, that I cannot thoroughly test and guarantee that they work.

Edited by pocopico
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...