buggy25200 Posted February 17, 2022 Share #3676 Posted February 17, 2022 il y a 35 minutes, Orphée a dit : Could you please take a look at DS3622xs+ ? Yes, I will do it in the coming days 2 Link to comment Share on other sites More sharing options...
altas Posted February 17, 2022 Share #3677 Posted February 17, 2022 @buggy25200 THX Link to comment Share on other sites More sharing options...
dodo-dk Posted February 17, 2022 Share #3678 Posted February 17, 2022 1 hour ago, Aigor said: Was you able to install DS3617xs? i was not able too on baremetal Gen8 i have only changed the loader. install was already done on the test VM. I use it on Proxmox. I will test a fresh install later and if it works, i switch from 3615xs to 3617xs the real VM. Link to comment Share on other sites More sharing options...
Aigor Posted February 17, 2022 Share #3679 Posted February 17, 2022 32 minutes ago, dodo-dk said: i have only changed the loader. install was already done on the test VM. I use it on Proxmox. I will test a fresh install later and if it works, i switch from 3615xs to 3617xs the real VM. Good luck, i wasn't able to install DS3617xs from tinycore , into a new Gen8, but i had luck with DS3622. Link to comment Share on other sites More sharing options...
p33ps Posted February 17, 2022 Share #3680 Posted February 17, 2022 6 hours ago, dodo-dk said: i have only changed the loader. install was already done on the test VM. I use it on Proxmox. I will test a fresh install later and if it works, i switch from 3615xs to 3617xs the real VM. Were you able to add additional HDDs? For any reason mine are not properly detected (Proxmox, G8, 3615xs). I can't create volumes/some of them don't appear in the Storage panel. Link to comment Share on other sites More sharing options...
aportnov Posted February 18, 2022 Share #3681 Posted February 18, 2022 How to build the DS3622 loader from redpill-helper? Link to comment Share on other sites More sharing options...
Orphée Posted February 18, 2022 Share #3682 Posted February 18, 2022 10 minutes ago, aportnov said: How to build the DS3622 loader from redpill-helper? Link to comment Share on other sites More sharing options...
dodo-dk Posted February 18, 2022 Share #3683 Posted February 18, 2022 23 hours ago, Aigor said: Good luck, i wasn't able to install DS3617xs from tinycore , into a new Gen8, but i had luck with DS3622. I have installed DS3617xs on a fresh VM and it works, with the ds3617xs_701-42218u2 Loader. Don't need to deactivate the internet connection. I use redpill-helper, not tinycore. The migration from 3615xs to 3617xs works without a problem on my real Proxmox VM. 17 hours ago, p33ps said: Were you able to add additional HDDs? For any reason mine are not properly detected (Proxmox, G8, 3615xs). I can't create volumes/some of them don't appear in the Storage panel. Yes, no problems here. I have one virtual Disk and 4 passthrough Disks. 2 Volumes and many Shared Folders. Link to comment Share on other sites More sharing options...
p33ps Posted February 18, 2022 Share #3684 Posted February 18, 2022 11 minutes ago, dodo-dk said: I have installed DS3617xs on a fresh VM and it works, with the ds3617xs_701-42218u2 Loader. Don't need to deactivate the internet connection. I use redpill-helper, not tinycore. The migration from 3615xs to 3617xs works without a problem on my real Proxmox VM. Yes, no problems here. I have one virtual Disk and 4 passthrough Disks. 2 Volumes and many Shared Folders. Wow, that sounds amazing! Can you please give us some inputs? Maybe you can share your Proxmox VM config. Where did you get ds3617xs_701-42218u2 loader? Thanks! Link to comment Share on other sites More sharing options...
dodo-dk Posted February 18, 2022 Share #3685 Posted February 18, 2022 (edited) My Proxmox config: args: -device 'qemu-xhci,addr=0x18' -drive 'id=synoboot,file=/var/lib/vz/images/100/loader.img,if=none,format=raw' -device 'usb-storage,id=synoboot,drive=synoboot,bootindex=5' balloon: 0 boot: d cores: 4 cpu: kvm64 localtime: 1 memory: 6144 name: Synology net0: virtio=00:00:00:00:00:00,bridge=vmbr0 numa: 0 onboot: 1 ostype: l26 protection: 0 sata0: local-lvm:vm-100-disk-0,discard=on,size=100G,ssd=1 sata1: /dev/disk/by-id/ata-WDC_WD60EFRX-68MYMN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata2: /dev/disk/by-id/ata-WDC_WD60EFRX-68MYMN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata3: /dev/disk/by-id/ata-WDC_WD60EFRX-68L0BN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata4: /dev/disk/by-id/ata-WDC_WD60EFRX-68L0BN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata5: /dev/disk/by-id/ata-ST2000LM003_HN-M201RAD_S3xxx,backup=0,serial=xxx,size=1953514584K scsihw: virtio-scsi-pci serial0: socket smbios1: uuid=xxx sockets: 1 startup: order=2,up=90 tablet: 0 The ds3617xs_701-42218u2 loader from https://github.com/jimmyGALLAND/redpill-load Develop Branch. Edited February 18, 2022 by dodo-dk 1 Link to comment Share on other sites More sharing options...
Orphée Posted February 18, 2022 Share #3686 Posted February 18, 2022 @dodo-dk sata0: local-lvm:vm-100-disk-0,discard=on,size=100G,ssd=1 sata1: /dev/disk/by-id/ata-WDC_WD60EFRX-68MYMN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata2: /dev/disk/by-id/ata-WDC_WD60EFRX-68MYMN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata3: /dev/disk/by-id/ata-WDC_WD60EFRX-68L0BN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata4: /dev/disk/by-id/ata-WDC_WD60EFRX-68L0BN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata5: /dev/disk/by-id/ata-ST2000LM003_HN-M201RAD_S3xxx,backup=0,serial=xxx,size=1953514584K Do you confirm this Proxmox settings is like ESXi RDM ? Do you have real SMART data inside DSM ? I don't think so, but just to confirm. Link to comment Share on other sites More sharing options...
dodo-dk Posted February 18, 2022 Share #3687 Posted February 18, 2022 sorry but ESXi RDM says me nothing. No, there is no real Smart Data, but my smart data is monitored by Proxmox. 1 Link to comment Share on other sites More sharing options...
p33ps Posted February 18, 2022 Share #3688 Posted February 18, 2022 9 minutes ago, dodo-dk said: My Proxmox config: args: -device 'qemu-xhci,addr=0x18' -drive 'id=synoboot,file=/var/lib/vz/images/100/loader.img,if=none,format=raw' -device 'usb-storage,id=synoboot,drive=synoboot,bootindex=5' balloon: 0 boot: d cores: 4 cpu: kvm64 localtime: 1 memory: 6144 name: Synology net0: virtio=00:00:00:00:00:00,bridge=vmbr0 numa: 0 onboot: 1 ostype: l26 protection: 0 sata0: local-lvm:vm-100-disk-0,discard=on,size=100G,ssd=1 sata1: /dev/disk/by-id/ata-WDC_WD60EFRX-68MYMN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata2: /dev/disk/by-id/ata-WDC_WD60EFRX-68MYMN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata3: /dev/disk/by-id/ata-WDC_WD60EFRX-68L0BN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata4: /dev/disk/by-id/ata-WDC_WD60EFRX-68L0BN1_WD-WXxxx,backup=0,serial=xxx,size=5860522584K sata5: /dev/disk/by-id/ata-ST2000LM003_HN-M201RAD_S3xxx,backup=0,serial=xxx,size=1953514584K scsihw: virtio-scsi-pci serial0: socket smbios1: uuid=xxx sockets: 1 startup: order=2,up=90 tablet: 0 The ds3617xs_701-42218u2 loader from https://github.com/jimmyGALLAND/redpill-load Develop Branch. Cool! Thanks. I'll try that one. Proxmox is under HP Gen8, right? Link to comment Share on other sites More sharing options...
dodo-dk Posted February 18, 2022 Share #3689 Posted February 18, 2022 No sorry, no HP Gen8. I have a Asrock E3C226D2I with Intel(R) Xeon(R) CPU E3-1285L v4 Link to comment Share on other sites More sharing options...
p33ps Posted February 18, 2022 Share #3690 Posted February 18, 2022 1 minute ago, dodo-dk said: No sorry, no HP Gen8. I have a Asrock E3C226D2I with Intel(R) Xeon(R) CPU E3-1285L v4 Ok! Will try anyways 👌 Link to comment Share on other sites More sharing options...
aportnov Posted February 18, 2022 Share #3691 Posted February 18, 2022 Who can reset the ready-made custom or global config json so that I can assemble "ds36222xsp_42218u2": "https://github.com/jimmyGALLAND/redpill-ext/raw/master/acpid/recipes/v7_broadwellnk .json" Link to comment Share on other sites More sharing options...
tlsnine Posted February 18, 2022 Share #3692 Posted February 18, 2022 (edited) This is nuts! Why does the ixgbe extension keep trying to download and install itself multiple times, only to fail and kill the build? EDIT: broadwellnk-7.0.1-42218 DS3622xs+ I'm using the 4.5 version of the img file and ran ./rploader update now to grab all the newest scripts. The extension file is in the default build now, right? Can I enter something in the user_config.json file or elsewhere to manually exclude this from trying to load? Thanks EDIT 2: I think I might've posted this in the wrong place. sorry Edited February 18, 2022 by tlsnine Link to comment Share on other sites More sharing options...
mafel_oo Posted February 19, 2022 Share #3693 Posted February 19, 2022 (edited) Hello, how do I find out the PID and VID on my Gen9 ESXI server? I would like to fully virtualize the Xpenology in SATA / Boot IDE mode (no usb stick) ? It's already running, but crashes "56% bug" when the system is in installation mode. I think this has something to do with the VID PID as I haven't adjusted that one.. Thanks for help *or did I understand correctly that it would have to be the PID / VID of my hard disk controller then? Edited February 19, 2022 by mafel_oo Link to comment Share on other sites More sharing options...
altas Posted February 19, 2022 Share #3694 Posted February 19, 2022 For EsXi you dont need PID/VID if you use SATA boot Link to comment Share on other sites More sharing options...
mafel_oo Posted February 19, 2022 Share #3695 Posted February 19, 2022 2 hours ago, altas said: For EsXi you dont need PID/VID if you use SATA boot ah, ok, thanks, so i leave it standard but why then does it break off the *,pat installation at 55%? Some people here had the error, what could it be in my case, any suggestions? HP Gen9, E5 v4 Xeon, P440i, ESXI 6.5 latest updates, Link to comment Share on other sites More sharing options...
Aigor Posted February 19, 2022 Share #3696 Posted February 19, 2022 10 minutes ago, mafel_oo said: ah, ok, thanks, so i leave it standard but why then does it break off the *,pat installation at 55%? Some people here had the error, what could it be in my case, any suggestions? HP Gen9, E5 v4 Xeon, P440i, ESXI 6.5 latest updates, Which type? try to use or DS3615xs or DS3622xs+, it seems that DS3617xs doesn't work Link to comment Share on other sites More sharing options...
altas Posted February 19, 2022 Share #3697 Posted February 19, 2022 Boot HDD on SATA 0:0 Drive HDD on SATA 1:0 mine is a ds3617xs Link to comment Share on other sites More sharing options...
mafel_oo Posted February 19, 2022 Share #3698 Posted February 19, 2022 5 minutes ago, Aigor said: Which type? try to use or DS3615xs or DS3622xs+, it seems that DS3617xs doesn't work I tried it currently with the 918+ with dsm 701_488xx , as workaround i've used the redpill Video Vmware + xpenology DSM 7.0.1 with redpill - YouTube Link to comment Share on other sites More sharing options...
mafel_oo Posted February 19, 2022 Share #3699 Posted February 19, 2022 (edited) 13 minutes ago, altas said: Boot HDD on SATA 0:0 Drive HDD on SATA 1:0 mine is a ds3617xs when I try SATA as boot device it doesn't work... it only loads when I select IDE as Boot Controller, otherwise it says the "prepared image isn't registered" Edited February 19, 2022 by mafel_oo Link to comment Share on other sites More sharing options...
mafel_oo Posted February 19, 2022 Share #3700 Posted February 19, 2022 14 minutes ago, altas said: Boot HDD on SATA 0:0 Drive HDD on SATA 1:0 mine is a ds3617xs can you maybe recommend a workaround aka guide how to install 3617xs? Link to comment Share on other sites More sharing options...
Recommended Posts