Jump to content
XPEnology Community

RedPill - the new loader for 6.2.4 - Discussion


Recommended Posts

4 minutes ago, painkiller895 said:

Took off mapping and tried to install on the dell 5040 i5 6500 cpu

Bear-metal fresh install, VID and PID are Correct, I also tried different USB sticks and nothing seems to work.

 

1438611802_Screenshot2022-01-03at16-31-23SynologyWebAssistant.thumb.png.2c04befbf701143e9899e8588c068f43.png

 

Another brick wall....

 

 

 

What is you VID and PID 

Link to comment
Share on other sites

18 minutes ago, painkiller895 said:

thanks Going to try reversing it.

 

nope that did not work, sheesh


Are you selecting USB on GRUB menu ? Normally after this fail message the telnet service gets started so you can telnet and Collect a dmesg output ? 
 

Also the output of the following commands :

 

fdisk -l

lspci -nnq

lsusb

 

 

Edited by pocopico
Link to comment
Share on other sites

6 minutes ago, pocopico said:


Are you selecting USB on GRUB menu ? Normally after this fail message the telnet service gets started so you can telnet and Collect a dmesg output ? 
 

Also the output of the following commands :

 

fdisk -l

lspci -nnq

lsusb

 

 

I try this tomorrow have to leave for now thanks for the help.

Link to comment
Share on other sites

Testowałem na fizycznej maszynie.

 

https://www.fujitsu.com/fts/products/computing/pc/desktops/esprimo-p556-e85/

 

Intel® H110

Intel Pentium G4560 4x3,5GHz (skylake — 6gen)
 Hynix 8GB DDR4 PC4-2400MHz (dwukanałowy)

 Karta graficzna Intel® HD 610

10/100/1000 Mb/s Realtek RTL8111G

1hdd 1TB do testowania

płytka posiada 3 złącza sata.

 

 

Mapa portu Sata = 6

Nie działa, błąd dysku

 

 

 

SataPortMap = 4

Instalacja i konfiguracja działa w 100%😁😁

 

DSM_DS918+_42218.pat

 

nas.kciuk.png.af4bfdae073933382f0dfe2ab9323fe9.png

 

 

 

Edited by dvbmaniak
bad image
Link to comment
Share on other sites

@pocopico

Hi, I meet some problems with 9pfs, please help me.

I use tossp's redpill-tool-chain(https://github.com/tossp/redpill-tool-chain) and ext list below to create apollolake-7.0.1-42218

jumkey.acpid2
pocopico.ixgbevf
redpill-boot-wait 
pocopico.v9fs 
thethorgroup.virtio  https://raw.githubusercontent.com/jumkey/redpill-load/develop/redpill-virtio/rpext-index.json

DSM7.0.1 can boot, but virtio ethernet isn't work. Also when I mount 9p, it report can't find virtio.

sudo mount -t 9p -o trans=virtio,version=9p2000.L,msize=262144 hostdata0 /volume1/datashare0
[  105.378672] 9pnet: Could not find request transport: virtio
mount: /volume1/datashare0: bad option; for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program.

the log is in attach files named (dmesg_virtio+9p.log)

 

 

Then I find a full virtio support packet with 9pfs from https://github.com/s2k7/DSM7-modules

s2k7 said it work well with 7.0.1, he manual install it into bootloader without ext manager

I packet it to redpill ext format, and upload to github https://github.com/Jason98881/virtio

Create apollolake-7.0.1-42218 again with ext list below:

jumkey.acpid2
pocopico.ixgbevf
thethorgroup.boot-wait
virtio_with_9pfs (named "virtio_with_9pfs" from https://raw.githubusercontent.com/Jason98881/virtio/main/rpext-index.json)

DSM7.0.1 can't boot, and the log in attach files named (dmesg_virtio_with_9p.log)

 

Please help me, or can you make a full virtio support ext with 9p? Thank you very much :)

 

dmesg_virtio+9p.log dmesg_virtio_with_9p.log

Edited by seanone
Link to comment
Share on other sites

Hey everybody, just recognized that there seems to be a possobility to install DSM 7.0.1 on a Q1900M board.

 

That is PHENOMENAL news!!! Thanks to everybody who was involed in making this happen!

 

Does aynbody know where I can find a "how to" or is it similar to the steps like with one of Jun's loaders?

Link to comment
Share on other sites

Thanks. Where can i find all the files and instructions for this please. 
There's no complete instructions as it's not ready for use by other then developers/programmers as of now. Don't be fooled by all posts here, people are just grasping for anything right now as this is our only hope of getting newer DSM working, but it's not finished and we don't know if we still have anyone working on solving all possible issues like support for drives larger then 2TB on SCSI/LSI controllers and many more.

Skickat från min GM1913 via Tapatalk

  • Like 1
Link to comment
Share on other sites

15 hours ago, haydibe said:

Can you make the SataPortMap: 44 - the pata controller should be classic ide with m/s devices on each port.

I am surprised the pata controller is even detected by lsscsi.

 

@haydibe SataPortMap: 42 is working great. SataPortMap: 44 results in an error.

Could you explain why "SasIdxMap": "0", "SataPortMap": "42", "DiskIdxMap": "0004" is the right configuration for my setup?

I would like to unterstand why "SataPortMap": "4" is not working and "DiskIdxMap": "0004" is necessary.

Link to comment
Share on other sites

 Obraz (znaleziono w internecie):

 

 

Musisz się zmienić:

 

     vid": "0xXXXX,
    "pid": "0xXXXX
    "sn": "xxxxx",
    "mac1": XXXXXXXXXXXX
    "DiskIdxMap": XXXXXXXXXXXXX
    "SataPortMap": XXXX
    "SasIdxMap": XXXXXXXXX

Edited by dvbmaniak
Link to comment
Share on other sites

11 minutes ago, dvbmaniak said:

 Image (found on the internet):

xxx

 

You have to change:

 

     vid": "0xXXXX,
    "pid": "0xXXXX
    "sn": "xxxxx",
    "mac1": XXXXXXXXXXXX
    "DiskIdxMap": XXXXXXXXXXXXX
    "SataPortMap": XXXX
    "SasIdxMap": XXXXXXXXX

 

Please don't post or share links to images! 

Link to comment
Share on other sites

Hello me, I followed this tutorial https://www.youtube.com/watch?v=UAfOSnk1AGE&t=1s and I was able to install DSM 7.01 without any problem on an Asrock j5005 itx motherboard with a bootable usb key and recover my data from the other hard disk which was dsm 6 before lossless the only thing that does not work for me is the waking up of the pc programmed from dsm 7 but I woke it up with my router in Wake on LAN.

  • Like 2
Link to comment
Share on other sites

15 hours ago, dvbmaniak said:

Testowałem na fizycznej maszynie.

 

https://www.fujitsu.com/fts/products/computing/pc/desktops/esprimo-p556-e85/

 

Intel® H110

Intel Pentium G4560 4x3,5GHz (skylake — 6gen)
 Hynix 8GB DDR4 PC4-2400MHz (dwukanałowy)

 Karta graficzna Intel® HD 610

1.....

 

 

Can you please keep it English? This brings us nowhere. 

Link to comment
Share on other sites

Sorry, my mistake, I can't edit the previous post anymore.

 

I tested on a physical machine.

 

https://www.fujitsu.com/fts/products/computing/pc/desktops/esprimo-p556-e85/

 

Intel® H110

Intel Pentium G4560 4x3.5GHz (skylake - 6gen)
  Hynix 8GB DDR4 PC4-2400MHz (dual channel)

  Intel® HD Graphics 610

10/100/1000 Mb / s Realtek RTL8111G

1hdd 1TB for testing

the board has 3 sata connectors.

 

Sata port map = 6

Not working, disk error

 

SataPortMap = 4

Installation and configuration works 100% 😁😁

 

DSM_DS918 + _42218.pat

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...