messica Posted November 22, 2021 Share #3076 Posted November 22, 2021 17 hours ago, RedwinX said: Hi ! I'm using the same card with the Pocopico's driver (Intel X520), but with 3615xs version, on a DELL R520 and works fine (with 8x8To seagate entreprise disk). Maybe you have to try with 3615xs? Or this is mandatory for HW transcoding to use 918+ version ? Thank you for your kind reply. My original intention to buy the 10400 CPU was to use the hard decoding capability of ds918. I saw that some bloggers succeeded in hard decoding, so I chose it (* ̄︶ ̄). I saw that you used `internalPortCfg=0xfff` to solve this problem. I tried it and it didn't seem to be applicable. I want to install ds918 even more, and I will also try ds3615. The spirit is willing, but the flesh is weak. Looking forward to the technical experts to solve this problem. Thank you all for your silent contribution. Link to comment Share on other sites More sharing options...
Rebutia Posted November 22, 2021 Share #3077 Posted November 22, 2021 On 11/21/2021 at 1:02 AM, messica said: hi guys, Is there any solution to resolve the reinstall pb(install -> restart -> install, loop). some of people have the same pb. my config: ds918+ 7.0.1 42218 on berametal msi b560m mortar (onboard nic: 8125b) i5 10400 a PCIE nic intel x520 with two port a seagate enterprise disk( 16T) use the loader neither only have picopoco's r8125 nor only have ixgbe nor both have the same result. Of course include the way repack the rd.gz. I have read all posts of this forum, not find a solution to mark it work. Any suggestion? Thx dmesg.txt 279.94 kB · 7 downloads Have you included mp3sata or Atlantic ext? Link to comment Share on other sites More sharing options...
devid79 Posted November 22, 2021 Share #3078 Posted November 22, 2021 20 hours ago, haydibe said: This one is easy to spot: your user_config.json is invalid. You need to add a comma after mac1, mac2 and mac3 in order to be a valid json. Also you need to make sure the mac addresses are unique, which they are not right now. Now this is my problem any ideas? Link to comment Share on other sites More sharing options...
mata7 Posted November 22, 2021 Share #3079 Posted November 22, 2021 hi guys I'm not smart enough to build my own image, is there a link that i can download a 918+ at ready build image, thanks in advanced Link to comment Share on other sites More sharing options...
WiteWulf Posted November 22, 2021 Share #3080 Posted November 22, 2021 On 11/20/2021 at 3:57 PM, ilovepancakes said: What setup are you using to get 10G NIC on ESXi with redpill? Did you pass through a physical NIC or it's virtual? I can only get 1G max with an e1000e vNIC. I'm using VMXNET3, not e1000e. It's on a vSwitch with a bonded 2x1GbE physical connection to a QNAP server acting as a filestore. Link to comment Share on other sites More sharing options...
messica Posted November 22, 2021 Share #3081 Posted November 22, 2021 2 hours ago, Rebutia said: Have you included mp3sata or Atlantic ext? mp3sata -> mpt3sas ? Two internal added ext virtio and boot-wait and r8125 Link to comment Share on other sites More sharing options...
WiteWulf Posted November 22, 2021 Share #3082 Posted November 22, 2021 On 11/19/2021 at 10:09 PM, haydibe said: @WiteWulf Thanks for checking! Did you had to enable jumbo frames somewhere? Now I am currious why it's not working for me. I wonder if it's Proxmox related? Nothing special. I just enabled it in DSM: 1 Link to comment Share on other sites More sharing options...
WiteWulf Posted November 22, 2021 Share #3083 Posted November 22, 2021 (edited) ignore Edited November 22, 2021 by WiteWulf 1 Link to comment Share on other sites More sharing options...
WiteWulf Posted November 22, 2021 Share #3084 Posted November 22, 2021 16 minutes ago, mata7 said: hi guys I'm not smart enough to build my own image, is there a link that i can download a 918+ at ready build image, thanks in advanced You need to make it yourself because the boot images contain copyrighted software belonging to Synology. The whole point of redpill-load is to enable people to build their own custom boot image using the software Synology make publicly available without redistributing that same Synology software with associated legal problems. Please don't ask for images and please don't provide them if anyone asks. 1 Link to comment Share on other sites More sharing options...
devid79 Posted November 22, 2021 Share #3085 Posted November 22, 2021 Hello Guys, I have HP Z230 with this configuration Intel Xeon e5-1225 v3 32 GB DDR3 1600MHZ 6 port SATA 0,1,2,3,4,5 BIos L51 v01.63 i use for image the last ./redpill_tool_chain.sh auto bromolow-7.0.1-42218 ############################################# filename: /opt/redpill-lkm/redpill.ko license: GPL version: v0.5-at-2021_11_22-10_25_50 author: TTG retpoline: Y srcversion: 9D5817BD80754EFE921A0AC depends: vermagic: 3.10.108 SMP mod_unload ############################################# with this user_config.json ############################################# Using user_config.json: { "extra_cmdline": { "pid": "0x0951", "vid": "0x1607", "netif_num": "4", "sn": "1610LWN022200", "mac1": "001132xxxxxx", "mac2": "001132xxxxxx", "mac3": "001132xxxxxx", "mac4": "001132xxxxxx" }, "synoinfo": { "maxlanport": "4", }, "ramdisk_copy": {}, "extensions": [] }############################################# }############################################# /opt/redpill-load /opt [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Extension thethorgroup.boot-wait is already installed from https://raw.githubusercontent.com/tossp/rp-ext/master/redpill-boot-wait/rpext-index.json [#] Checking runtime for required tools... [OK] [#] Updating thethorgroup.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/tossp/rp-ext/master/redpill-boot-wait/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [#] Extension thethorgroup.boot-wait index is already up to date [#] Updating thethorgroup.boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3615xs_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/recipes/universal.json to /opt/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################## 100.0% [#] Extension thethorgroup.boot-wait for ds3615xs_42218 platform is already up to date [#] Updating ds3615xs_42218 platforms extensions... [OK] [#] Updating extensions... [OK] [#] Verifying /opt/redpill-load/cache/ds3615xs_42218.pat file... [OK] [#] Unpacking /opt/redpill-load/cache/ds3615xs_42218.pat file to /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked... [OK] [#] Verifying /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/zImage file... [OK] [#] Patching /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/zImage to /opt/redpill-load/build/1637576756/zImage-patched... [OK] [#] Verifying /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/rd.gz file... [OK] [#] Unpacking /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/rd.gz file to /opt/redpill-load/build/1637576756/rd-ds3615xs_42218-unpacked... [OK] [#] Apply patches to /opt/redpill-load/build/1637576756/rd-ds3615xs_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /opt/redpill-load/build/1637576756/rd-patched-ds3615xs_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3615xs_42218 platform extensions to /opt/redpill-load/build/1637576756/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /opt/redpill-load/build/1637576756/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at /opt/redpill-load/images/redpill-DS3615xs_7.0.1-42218_b1637576756.img... [OK] [#] Cleaning up... [OK] the image start and open webconfiguration to ip:5000 but the problem is this hard disk errors were detected(2,3,4,5) ; sata ports have been disabled. Help me Please🙏 Link to comment Share on other sites More sharing options...
RedwinX Posted November 22, 2021 Share #3086 Posted November 22, 2021 19 minutes ago, devid79 said: Hello Guys, I have HP Z230 with this configuration Intel Xeon e5-1225 v3 32 GB DDR3 1600MHZ 6 port SATA 0,1,2,3,4,5 BIos L51 v01.63 i use for image the last ./redpill_tool_chain.sh auto bromolow-7.0.1-42218 ############################################# filename: /opt/redpill-lkm/redpill.ko license: GPL version: v0.5-at-2021_11_22-10_25_50 author: TTG retpoline: Y srcversion: 9D5817BD80754EFE921A0AC depends: vermagic: 3.10.108 SMP mod_unload ############################################# with this user_config.json ############################################# Using user_config.json: { "extra_cmdline": { "pid": "0x0951", "vid": "0x1607", "netif_num": "4", "sn": "1610LWN022200", "mac1": "001132xxxxxx", "mac2": "001132xxxxxx", "mac3": "001132xxxxxx", "mac4": "001132xxxxxx" }, "synoinfo": { "maxlanport": "4", }, "ramdisk_copy": {}, "extensions": [] }############################################# }############################################# /opt/redpill-load /opt [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Extension thethorgroup.boot-wait is already installed from https://raw.githubusercontent.com/tossp/rp-ext/master/redpill-boot-wait/rpext-index.json [#] Checking runtime for required tools... [OK] [#] Updating thethorgroup.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/tossp/rp-ext/master/redpill-boot-wait/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [#] Extension thethorgroup.boot-wait index is already up to date [#] Updating thethorgroup.boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3615xs_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/recipes/universal.json to /opt/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################## 100.0% [#] Extension thethorgroup.boot-wait for ds3615xs_42218 platform is already up to date [#] Updating ds3615xs_42218 platforms extensions... [OK] [#] Updating extensions... [OK] [#] Verifying /opt/redpill-load/cache/ds3615xs_42218.pat file... [OK] [#] Unpacking /opt/redpill-load/cache/ds3615xs_42218.pat file to /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked... [OK] [#] Verifying /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/zImage file... [OK] [#] Patching /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/zImage to /opt/redpill-load/build/1637576756/zImage-patched... [OK] [#] Verifying /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/rd.gz file... [OK] [#] Unpacking /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/rd.gz file to /opt/redpill-load/build/1637576756/rd-ds3615xs_42218-unpacked... [OK] [#] Apply patches to /opt/redpill-load/build/1637576756/rd-ds3615xs_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /opt/redpill-load/build/1637576756/rd-patched-ds3615xs_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3615xs_42218 platform extensions to /opt/redpill-load/build/1637576756/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /opt/redpill-load/build/1637576756/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at /opt/redpill-load/images/redpill-DS3615xs_7.0.1-42218_b1637576756.img... [OK] [#] Cleaning up... [OK] the image start and open webconfiguration to ip:5000 but the problem is this hard disk errors were detected(2,3,4,5) ; sata ports have been disabled. Help me Please🙏 "extra_cmdline": { "vid": "0x8564", "pid": "0x1000", "sn": "", "mac1": "" }, "synoinfo": { "internalportcfg": "0xfff", "esataportcfg": "0xff000", "maxdisks": "12" }, "ramdisk_copy": {} } Just add into synonifo in your user_config, will be works 1 Link to comment Share on other sites More sharing options...
devid79 Posted November 22, 2021 Share #3087 Posted November 22, 2021 4 minutes ago, RedwinX said: "extra_cmdline": { "vid": "0x8564", "pid": "0x1000", "sn": "", "mac1": "" }, "synoinfo": { "internalportcfg": "0xfff", "esataportcfg": "0xff000", "maxdisks": "12" }, "ramdisk_copy": {} } Just add into synonifo in your user_config, will be works thx a lot with my vip & pid exactly? Link to comment Share on other sites More sharing options...
devid79 Posted November 22, 2021 Share #3088 Posted November 22, 2021 11 minutes ago, RedwinX said: "extra_cmdline": { "vid": "0x8564", "pid": "0x1000", "sn": "", "mac1": "" }, "synoinfo": { "internalportcfg": "0xfff", "esataportcfg": "0xff000", "maxdisks": "12" }, "ramdisk_copy": {} } Just add into synonifo in your user_config, will be works i tested same error Link to comment Share on other sites More sharing options...
shibby Posted November 22, 2021 Share #3089 Posted November 22, 2021 1 hour ago, devid79 said: i tested same error try this one: add to extra_cmdline "DiskIdxMap": "00", "SataPortMap": "4", "SasIdxMap": "0" Link to comment Share on other sites More sharing options...
devid79 Posted November 22, 2021 Share #3090 Posted November 22, 2021 (edited) 13 minutes ago, shibby said: try this one: add to extra_cmdline "DiskIdxMap": "00", "SataPortMap": "4", "SasIdxMap": "0" @shibbysame error but only port 1,2,3 before 1,3,4,5 Edited November 22, 2021 by devid79 Link to comment Share on other sites More sharing options...
cferra Posted November 22, 2021 Share #3091 Posted November 22, 2021 @ThorGroup We miss you!! 4 Link to comment Share on other sites More sharing options...
yanjun Posted November 22, 2021 Share #3092 Posted November 22, 2021 19 minutes ago, cferra said: @ThorGroup We miss you!! @ThorGroup We miss you!! 1 Link to comment Share on other sites More sharing options...
ct85msi Posted November 22, 2021 Share #3093 Posted November 22, 2021 2 hours ago, devid79 said: Hello Guys, I have HP Z230 with this configuration Intel Xeon e5-1225 v3 32 GB DDR3 1600MHZ 6 port SATA 0,1,2,3,4,5 BIos L51 v01.63 i use for image the last ./redpill_tool_chain.sh auto bromolow-7.0.1-42218 ############################################# filename: /opt/redpill-lkm/redpill.ko license: GPL version: v0.5-at-2021_11_22-10_25_50 author: TTG retpoline: Y srcversion: 9D5817BD80754EFE921A0AC depends: vermagic: 3.10.108 SMP mod_unload ############################################# with this user_config.json ############################################# Using user_config.json: { "extra_cmdline": { "pid": "0x0951", "vid": "0x1607", "netif_num": "4", "sn": "1610LWN022200", "mac1": "001132xxxxxx", "mac2": "001132xxxxxx", "mac3": "001132xxxxxx", "mac4": "001132xxxxxx" }, "synoinfo": { "maxlanport": "4", }, "ramdisk_copy": {}, "extensions": [] }############################################# }############################################# /opt/redpill-load /opt [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Extension thethorgroup.boot-wait is already installed from https://raw.githubusercontent.com/tossp/rp-ext/master/redpill-boot-wait/rpext-index.json [#] Checking runtime for required tools... [OK] [#] Updating thethorgroup.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/tossp/rp-ext/master/redpill-boot-wait/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [#] Extension thethorgroup.boot-wait index is already up to date [#] Updating thethorgroup.boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3615xs_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/recipes/universal.json to /opt/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################## 100.0% [#] Extension thethorgroup.boot-wait for ds3615xs_42218 platform is already up to date [#] Updating ds3615xs_42218 platforms extensions... [OK] [#] Updating extensions... [OK] [#] Verifying /opt/redpill-load/cache/ds3615xs_42218.pat file... [OK] [#] Unpacking /opt/redpill-load/cache/ds3615xs_42218.pat file to /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked... [OK] [#] Verifying /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/zImage file... [OK] [#] Patching /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/zImage to /opt/redpill-load/build/1637576756/zImage-patched... [OK] [#] Verifying /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/rd.gz file... [OK] [#] Unpacking /opt/redpill-load/build/1637576756/pat-ds3615xs_42218-unpacked/rd.gz file to /opt/redpill-load/build/1637576756/rd-ds3615xs_42218-unpacked... [OK] [#] Apply patches to /opt/redpill-load/build/1637576756/rd-ds3615xs_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /opt/redpill-load/build/1637576756/rd-patched-ds3615xs_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3615xs_42218 platform extensions to /opt/redpill-load/build/1637576756/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /opt/redpill-load/build/1637576756/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at /opt/redpill-load/images/redpill-DS3615xs_7.0.1-42218_b1637576756.img... [OK] [#] Cleaning up... [OK] the image start and open webconfiguration to ip:5000 but the problem is this hard disk errors were detected(2,3,4,5) ; sata ports have been disabled. Help me Please🙏 Try to enable hotplug for every sata port in BIOS/EFI. That worked for me on a H97/Haswell system. Link to comment Share on other sites More sharing options...
devid79 Posted November 22, 2021 Share #3094 Posted November 22, 2021 5 minutes ago, ct85msi said: Try to enable hotplug for every sata port in BIOS/EFI. That worked for me on a H97/Haswell system. @ct85msi i dont have this option on my bios. Link to comment Share on other sites More sharing options...
ct85msi Posted November 22, 2021 Share #3095 Posted November 22, 2021 I had the same error as you, that solved my problem. Link to comment Share on other sites More sharing options...
reziel84 Posted November 22, 2021 Share #3096 Posted November 22, 2021 6 hours ago, pocopico said: You should assign the loader in first sata controller 0:0 and the data disk on sata controller 1:0 hi pocopico and at first thanks for your support. i just set: redpill disk sata controller 0 sataport 0:0 and add a second disk sata controller 1 and sataport 1:0. correct? i have the same error, i just add new serial.out, please could you help me? serial.out Link to comment Share on other sites More sharing options...
u357 Posted November 22, 2021 Share #3097 Posted November 22, 2021 First loader in USB, edit the grub.cfg , add those object in red into the line that was already in there linux /zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 DiskIdxMap=0C00 SataPortMap=42 SasIdxMap=1 vender_format_version=2 mac2=000000000000 earlyprintk mac1=001000000000 syno_hdd_powerup_seq=1 pid=0x5591 log_buf_len=32M syno_hw_version=DS918+ vid=0x0781 earlycon=uart8250,io,0x3f8,115200n8 sn=1780PDN123456 elevator=elevator root=/dev/md0 loglevel=15 Link to comment Share on other sites More sharing options...
reziel84 Posted November 22, 2021 Share #3098 Posted November 22, 2021 7 minutes ago, u357 said: First loader in USB, edit the grub.cfg , add those object in red into the line that was already in there linux /zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 DiskIdxMap=0C00 SataPortMap=42 SasIdxMap=1 vender_format_version=2 mac2=000000000000 earlyprintk mac1=001000000000 syno_hdd_powerup_seq=1 pid=0x5591 log_buf_len=32M syno_hw_version=DS918+ vid=0x0781 earlycon=uart8250,io,0x3f8,115200n8 sn=1780PDN123456 elevator=elevator root=/dev/md0 loglevel=15 hi u357, this answer is for my problem? Link to comment Share on other sites More sharing options...
u357 Posted November 22, 2021 Share #3099 Posted November 22, 2021 2 hours ago, devid79 said: @shibbysame error but only port 1,2,3 before 1,3,4,5 First loader in USB, edit the grub.cfg , add those object in red into the line that was already in there linux /zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 DiskIdxMap=0C00 SataPortMap=42 SasIdxMap=1 vender_format_version=2 mac2=000000000000 earlyprintk mac1=001000000000 syno_hdd_powerup_seq=1 pid=0x5591 log_buf_len=32M syno_hw_version=DS918+ vid=0x0781 earlycon=uart8250,io,0x3f8,115200n8 sn=1780PDN123456 elevator=elevator root=/dev/md0 loglevel=15 Link to comment Share on other sites More sharing options...
u357 Posted November 22, 2021 Share #3100 Posted November 22, 2021 54 minutes ago, reziel84 said: hi pocopico and at first thanks for your support. i just set: redpill disk sata controller 0 sataport 0:0 and add a second disk sata controller 1 and sataport 1:0. correct? i have the same error, i just add new serial.out, please could you help me? redpill disk sata controller 0 sataport 0,0 and second disk sata controller 0 sataport 0,1, it should works Link to comment Share on other sites More sharing options...
Recommended Posts