titoum Posted October 25, 2021 Share #2876 Posted October 25, 2021 3 hours ago, WiteWulf said: Was PMS running at the time? It's basically a big database, so trying to back it up while running will give you errors re. locked files. You should be able to backup the media library locations with no problems, but the database backend will be problematic. i tried also to stop it but didnt seem to be happy about it 😛 i will first move to latest version of dsm and may be give it another try Link to comment Share on other sites More sharing options...
Jotouriste Posted October 25, 2021 Share #2877 Posted October 25, 2021 bonsoir, J'ai passer un NAS officiel 1010+ en Dsm 7 avec le redpill ça tourne impec il est reconnu comme un ds3615xs faut virer la carte flash interne et booter sur usb 2 Link to comment Share on other sites More sharing options...
NooL Posted October 26, 2021 Share #2878 Posted October 26, 2021 14 hours ago, Jotouriste said: bonsoir, J'ai passer un NAS officiel 1010+ en Dsm 7 avec le redpill ça tourne impec il est reconnu comme un ds3615xs faut virer la carte flash interne et booter sur usb English here, otherwise its the French section in the forum Link to comment Share on other sites More sharing options...
WiteWulf Posted October 26, 2021 Share #2879 Posted October 26, 2021 2 hours ago, NooL said: English here, otherwise its the French section in the forum Bit rude! @Jotouriste merci beaucoup pour votre avis, mais le section française est plus appropriée. Avez vous le kernel panic avec docker/database concernant https://github.com/RedPill-TTG/redpill-lkm/issues/21 ? Désolé pour ma pauvre "école d'anglais" français 2 Link to comment Share on other sites More sharing options...
NooL Posted October 26, 2021 Share #2880 Posted October 26, 2021 23 minutes ago, WiteWulf said: Bit rude! @Jotouriste merci beaucoup pour votre avis, mais le section française est plus appropriée. Avez vous le kernel panic avec docker/database concernant https://github.com/RedPill-TTG/redpill-lkm/issues/21 ? Désolé pour ma pauvre "école d'anglais" français Not sure how you would find that rude, but okay... Link to comment Share on other sites More sharing options...
neonflx Posted October 26, 2021 Share #2881 Posted October 26, 2021 I'm using Unraid and running VM with 6.2 jun loader without any issues passing HBA controller and 10gb nic, this part is fine. I tried creating a new VM using RP and DSM 7, I'm able to boot, find and start the setup however every time i get the same error: "Failed to install the file. The file is probable corrupted. (13)" I tried passing the HBA controller directly, tried passing the disk using /dev/disk/by-id.... and tried just creating a vdisk img always getting the same error. Using SATA I can see the HDs , using Virtio I can't I tried different pat files as well Any suggestions? Link to comment Share on other sites More sharing options...
dominiaz Posted October 26, 2021 Share #2882 Posted October 26, 2021 18 minutes ago, neonflx said: I'm using Unraid and running VM with 6.2 jun loader without any issues passing HBA controller and 10gb nic, this part is fine. I tried creating a new VM using RP and DSM 7, I'm able to boot, find and start the setup however every time i get the same error: "Failed to install the file. The file is probable corrupted. (13)" I tried passing the HBA controller directly, tried passing the disk using /dev/disk/by-id.... and tried just creating a vdisk img always getting the same error. Using SATA I can see the HDs , using Virtio I can't I tried different pat files as well Any suggestions? Check your PID/VID of virtual pendrive on Unraid. It should be a problem. Link to comment Share on other sites More sharing options...
xPalito93 Posted October 26, 2021 Share #2883 Posted October 26, 2021 I've got a similar issue running redpill on esxi 7.0. I always get a message saying that the .pat is corrupted. Does pid/vid matter when using esxi? If yes, which should i enter? Or how do i find out what i should input? Link to comment Share on other sites More sharing options...
altas Posted October 26, 2021 Share #2884 Posted October 26, 2021 not sure if this message is still valid If you're running QEmu-based virtualization (e.g. Proxmox or VirtualBox) set vid to 0x46f4 and pid to 0x0001 Link to comment Share on other sites More sharing options...
neonflx Posted October 26, 2021 Share #2885 Posted October 26, 2021 I have vid and pid set to that, it boots fine and I can start the pat installation, around 56% durin pat installation it gives the error Link to comment Share on other sites More sharing options...
titoum Posted October 27, 2021 Share #2886 Posted October 27, 2021 6 hours ago, neonflx said: I have vid and pid set to that, it boots fine and I can start the pat installation, around 56% durin pat installation it gives the error i had similar issue when i noticed that i switched vid/pid in the config file 😓 Link to comment Share on other sites More sharing options...
jhoughten Posted October 27, 2021 Share #2887 Posted October 27, 2021 It's quiet today, so, I'll as this question. Does anyone have a definitive answer or even a pretty good idea as to why the face detection in Synology Photos works on 3615 but not on 918? I have 2 KVM based VMs (on Unraid), identical except for the SNs and MAC addresses. Redpill with JumKey's 7.0.1 develop branch The 3615 VM finds faces with no errors. The 918 VM gives the "synofoto-face-exctraction[] uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so" error. It does not seem related to SN/MAC address. The 3615 SN is from the NS Generator and the 918 is an actual SN from a 918. I am not using Synology MAC addresses. Both are the ones that Unraid set. Link to comment Share on other sites More sharing options...
neonflx Posted October 27, 2021 Share #2888 Posted October 27, 2021 I was able to make it work by booting the boot img on sata rather than usb. is there an ext driver for the AMD FCH SATA controller? Want to use 2 SSD as cache but when I pass-through the controller it crashes the vm Link to comment Share on other sites More sharing options...
jhoughten Posted October 27, 2021 Share #2889 Posted October 27, 2021 I switched to SATA boot, but I get the same error situation. The pkg-SynologyPhotos-face-extraction service is running. systemctl status pkg-SynologyPhotos-face-extraction gives a little more info. The error there just before the uncaught thread task exception is: "Error: (face plugin) load network failed" So, maybe MAC address is important on the 918, but not the 3615? I'm going to change the MAC to the Synology MAC for that SN. Link to comment Share on other sites More sharing options...
Orphée Posted October 27, 2021 Share #2890 Posted October 27, 2021 30 minutes ago, jhoughten said: I switched to SATA boot, but I get the same error situation. The pkg-SynologyPhotos-face-extraction service is running. systemctl status pkg-SynologyPhotos-face-extraction gives a little more info. The error there just before the uncaught thread task exception is: "Error: (face plugin) load network failed" So, maybe MAC address is important on the 918, but not the 3615? I'm going to change the MAC to the Synology MAC for that SN. https://github.com/RedPill-TTG/redpill-load/issues/45 Link to comment Share on other sites More sharing options...
dreamtek Posted October 28, 2021 Share #2891 Posted October 28, 2021 7 hours ago, Orphée said: https://github.com/RedPill-TTG/redpill-load/issues/45 In proxmox with a HD5xx or HD6xx IGPU passthrough,this question can be solved. The problem is opengl(which syno used to accelerate the facedetect) only use a i915 device with addr 00:02,and the default addr of proxmox passthrogh is 00:10. So you can manually edit it in args: -device vfio-pci,host=00:02.0,addr=0x02,x-igd-opregion=on. Remenber the i915 driver blacklist and vfio options in /etc/modprobe.d/vfio.conf must be done first.Or it will be a freeze on proxmox host,shutdown the autorun of DSM VM first before do above! 3 Link to comment Share on other sites More sharing options...
seanone Posted October 28, 2021 Share #2892 Posted October 28, 2021 (edited) @jhoughten @Orphée https://post.smzdm.com/p/ad2k0grx/ It's a 918 face detect solution with GVT-G in Proxmox. The reason dreamtek has said above. Edited October 28, 2021 by seanone 3 Link to comment Share on other sites More sharing options...
jhoughten Posted October 28, 2021 Share #2893 Posted October 28, 2021 So, the Synology Photos package determines which platform it is running on. If it is running on a 3615, it does not use the acceleration method. There is nothing special to be done on that platform. If it is running on a 918, it "knows" that a 918 has the hardware to accelerate the face detection. On the virtual platform, the acceleration fails and the face detection does not fall back to an unaccelerated detection. It simply fails. So we have to pass through hardware to allow that acceleration. And we have to do it in a specific way for the package to use it. Should the loader even attempt to fix this, or is it outside of the scope of the RedPill? Link to comment Share on other sites More sharing options...
mounsif Posted October 28, 2021 Share #2894 Posted October 28, 2021 I can not install dsm 7 on my ESXI7 always asking me to install again. can someone please upload an image of esxi7 1 Link to comment Share on other sites More sharing options...
wahabe Posted October 28, 2021 Share #2895 Posted October 28, 2021 The same problem Only when adding any drive Link to comment Share on other sites More sharing options...
mounsif Posted October 28, 2021 Share #2896 Posted October 28, 2021 (edited) the formatting and the installation is going successfully but when restarted it back first page 'setup' Edited October 28, 2021 by mounsif Link to comment Share on other sites More sharing options...
urundai Posted October 28, 2021 Share #2897 Posted October 28, 2021 26 minutes ago, mounsif said: the formatting and the installation is going successfully but when restarted it back first page 'setup' Can you share some additional details? Is this for passthrough of HBA card or you have individual disks? What's your json config for the build? On PCI-E Passthrough, I had the same problem and gave up after trying multiple things. I was able to telnet and fdisk -l showed all the disks being there. I couldn't figure out why (even with help from experts on this forum). Hopefully, your situation is different but bit more details will help provide some options to explore. 1 Link to comment Share on other sites More sharing options...
mounsif Posted October 28, 2021 Share #2898 Posted October 28, 2021 srv: dell poweredge t420 Os: vmware esxi 7.0.3 compile loder : redpill v0.11 Raid 1 = 4 hard disk sas global_config.json Link to comment Share on other sites More sharing options...
pipsen Posted October 28, 2021 Share #2899 Posted October 28, 2021 (edited) Hello together, I have read hundreds of posts here, but I still habe no success in booting my DSM 7.0.1 baremetal on my Intel NUC7i3 (just one M.2 SSD inside, nothing else). This is what I did: downloaded https://github.com/tossp/redpill-tool-chain created apollolake_user_config.json with VID, PID, SN, MAC compiled redpill-DS918+_7.0.1-42218_b1635455689.img and wrote it on USB stick Result: Image is booting and I can access it via Web Interface "detected errors on the hard drives (2)" tried several SataPortMap and DiskIdxMap combinations (00 1 / 0C 1 / etc...) in grub.cfg => either detected errors or no harddisk detected at all tried to connect via telnet => connection refused downloaded a redpill 42214 image from a post here and adapted VID, PID, SN, MAC => same problem What is now the final solution of all these hints in these 116 pages to get rid of this problem? 😑 Thank you! Edited October 28, 2021 by pipsen Link to comment Share on other sites More sharing options...
urundai Posted October 28, 2021 Share #2900 Posted October 28, 2021 (edited) 2 hours ago, mounsif said: srv: dell poweredge t420 Os: vmware esxi 7.0.3 compile loder : redpill v0.11 Raid 1 = 4 hard disk sas global_config.json 5.67 kB · 7 downloads Thank you. Global config is generic but can you also share the bromolow or Apollo user config as well? (please take out the serial number). Also, can you explain the Sas part of the comment? Are these SATA disks or Sas ? Edited October 28, 2021 by urundai Link to comment Share on other sites More sharing options...
Recommended Posts