loomes Posted September 27, 2021 Share #2001 Posted September 27, 2021 7 hours ago, yanjun said: @loomes Some findings about face detection: 1. The CPU of I7-8700 has the core display of UHD630. It can be successful to install DSM7.0.1 under the physical machine 2. The CPU of I7-8700 has a UHD630 core display, install PVE, the core display passes through to DSM7.0.1, ls /dev/dri/ gets card0 renderD128, but the face detection is unsuccessful @Orphée @yanjun OK. So the Problem is Proxmox itself for the 918. And yes, the 3615 works fine here with Face Detection (without graphic card) on the same Proxmox Host as the 918 Machine. I dont think the graphic card has anything to do with the Face Detection. Link to comment Share on other sites More sharing options...
pocopico Posted September 27, 2021 Share #2002 Posted September 27, 2021 A few compiled modules for DS918+ (4.4.180+). Most network drivers have been tested and work https://github.com/pocopico/4.4.180plus-modules 3 5 Link to comment Share on other sites More sharing options...
umdanwait Posted September 27, 2021 Share #2003 Posted September 27, 2021 16 minutes ago, pocopico said: A few compiled modules for DS918+ (4.4.180+). Most network drivers have been tested and work https://github.com/pocopico/4.4.180plus-modules e1000.ko possible ? Link to comment Share on other sites More sharing options...
pocopico Posted September 27, 2021 Share #2004 Posted September 27, 2021 28 minutes ago, umdanwait said: e1000.ko possible ? Yes i missed these ... they should be there now Link to comment Share on other sites More sharing options...
stefauresi Posted September 27, 2021 Share #2005 Posted September 27, 2021 Il y a 1 heure, pocopico a dit : A few compiled modules for DS918+ (4.4.180+). Most network drivers have been tested and work https://github.com/pocopico/4.4.180plus-modules Hi , Thx I don't see if exist an tuto for compile redpill ? I need add this modules for use my Asus 10Gb Nic Best regards Link to comment Share on other sites More sharing options...
pocopico Posted September 27, 2021 Share #2006 Posted September 27, 2021 18 minutes ago, stefauresi said: Hi , Thx I don't see if exist an tuto for compile redpill ? I need add this modules for use my Asus 10Gb Nic Best regards Can you try atlantic.ko ? Link to comment Share on other sites More sharing options...
umdanwait Posted September 27, 2021 Share #2007 Posted September 27, 2021 2 hours ago, pocopico said: Yes i missed these ... they should be there now Thanks, tested and works fine! 1 Link to comment Share on other sites More sharing options...
man275 Posted September 28, 2021 Share #2008 Posted September 28, 2021 A new DSM 7.0.1 seems just rolled out. https://www.synology.com/en-global/releaseNote/DSM Build number is +4 compared with previous RC 42214. Link to comment Share on other sites More sharing options...
buffaloinvietnam Posted September 28, 2021 Share #2009 Posted September 28, 2021 Waiting for tool_chain with this upgrade. Link to comment Share on other sites More sharing options...
nemesis122 Posted September 28, 2021 Share #2010 Posted September 28, 2021 dump question how can i add this to the compiler or to the image itself ? thank you very much 10 hours ago, pocopico said: A few compiled modules for DS918+ (4.4.180+). Most network drivers have been tested and work https://github.com/pocopico/4.4.180plus-modules Link to comment Share on other sites More sharing options...
wang_chx Posted September 28, 2021 Share #2011 Posted September 28, 2021 On 9/27/2021 at 1:52 PM, imdgg said: can you lauch a container in 3615xs? my CPU: E3 1265L V2 yes, I can. the qbittorent is running well in container. Link to comment Share on other sites More sharing options...
ct85msi Posted September 28, 2021 Share #2012 Posted September 28, 2021 (edited) 1 hour ago, man275 said: A new DSM 7.0.1 seems just rolled out. https://www.synology.com/en-global/releaseNote/DSM Build number is +4 compared with previous RC 42214. I think that this is the final version, it is no longer marked as RC. https://www.synology.com/en-global/support/download/DS918+#system Can someone test if we can update from RC to this final version without a new loader ? Edited September 28, 2021 by ct85msi Link to comment Share on other sites More sharing options...
buffaloinvietnam Posted September 28, 2021 Share #2013 Posted September 28, 2021 (edited) 37 minutes ago, ct85msi said: I think that this is the final version, it is no longer marked as RC. https://www.synology.com/en-global/support/download/DS918+#system Can someone test if we can update from RC to this final version without a new loader ? I want to give it a try but stuck on downloading pat file from Synology website. Maybe, many people are eager to use this upgrade. My download speed is 15KB/s. It takes 6 hours to download that file. hic Edited September 28, 2021 by buffaloinvietnam 1 Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2014 Posted September 28, 2021 Working with latest @jumkey commits Did not test more than booting yet. @jumkeythanks 1 2 Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2015 Posted September 28, 2021 @WiteWulf Running docker influxdb container on latest 7.0.1 42218 Still not crashed so far... 1 1 Link to comment Share on other sites More sharing options...
Amoureux Posted September 28, 2021 Share #2016 Posted September 28, 2021 11 минуту назад, Orphée сказал: Working with latest @jumkey commits @jumkeythanks with last chaintool 0.11 I have an error [#] Checking runtime for required tools... [OK] [!] There doesn't seem to be a config for DS918+ platform running 7.0.1-42214 (checked /opt/redpill-load/config/DS918+/7.0.1-42214/config.json) Link to comment Share on other sites More sharing options...
buffaloinvietnam Posted September 28, 2021 Share #2017 Posted September 28, 2021 Just now, Amoureux said: with last chaintool 0.11 I have an error [#] Checking runtime for required tools... [OK] [!] There doesn't seem to be a config for DS918+ platform running 7.0.1-42214 (checked /opt/redpill-load/config/DS918+/7.0.1-42214/config.json) same for me Link to comment Share on other sites More sharing options...
Amoureux Posted September 28, 2021 Share #2018 Posted September 28, 2021 7.0.1 ??? Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2019 Posted September 28, 2021 (edited) You have to manually edit your global conf file. Jumkey's repository is not part of official redpill_tool_chain release. Here is mine (zoom on bromolow conf only) { "id": "bromolow-7.0.1-42218", "platform_version": "bromolow-7.0.1-42218", "user_config_json": "bromolow_user_config.json", "docker_base_image": "debian:8-slim", "compile_with": "toolkit_dev", "redpill_lkm_make_target": "dev-v7", "downloads": { "kernel": { "url": "https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download", "sha256": "18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed" }, "toolkit_dev": { "url": "https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download", "sha256": "a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd" } }, "redpill_lkm": { "source_url": "https://github.com/RedPill-TTG/redpill-lkm.git", "branch": "master" }, "redpill_load": { "source_url": "https://github.com/jumkey/redpill-load.git", "branch": "develop" } }, @Amoureux develop branch Edited September 28, 2021 by Orphée 1 Link to comment Share on other sites More sharing options...
Amoureux Posted September 28, 2021 Share #2020 Posted September 28, 2021 (edited) 5 минут назад, Orphée сказал: You have to manually edit your global conf file. Jumkey's repository is not part of official redpill_tool_chain release. Here is mine (zoom on bromolow conf only) { "id": "bromolow-7.0.1-42218", "platform_version": "bromolow-7.0.1-42218", "user_config_json": "bromolow_user_config.json", "docker_base_image": "debian:8-slim", "compile_with": "toolkit_dev", "redpill_lkm_make_target": "dev-v7", "downloads": { "kernel": { "url": "https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download", "sha256": "18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed" }, "toolkit_dev": { "url": "https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download", "sha256": "a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd" } }, "redpill_lkm": { "source_url": "https://github.com/RedPill-TTG/redpill-lkm.git", "branch": "master" }, "redpill_load": { "source_url": "https://github.com/jumkey/redpill-load.git", "branch": "develop" } }, @Amoureux develop branch I have this in global config global_config.json last successful build was September 23 for me, after that I do not try use toolchain. Today it crashed. But last build 7.0.1 what I have is work perfectly. Edited September 28, 2021 by Amoureux Link to comment Share on other sites More sharing options...
yanjun Posted September 28, 2021 Share #2021 Posted September 28, 2021 15 hours ago, loomes said: @Orphée @yanjun OK. So the Problem is Proxmox itself for the 918. And yes, the 3615 works fine here with Face Detection (without graphic card) on the same Proxmox Host as the 918 Machine. I dont think the graphic card has anything to do with the Face Detection. Maybe I need to update some information. The latest situation is that the 918 I installed on the pve can perform face detection. The operation that needs to be noted is that when the pass-through core display (mine is UHD630), the parameter legacy-igd=1 needs to be added , So the complete parameter of the command line displayed by the pass-through core is hostpci0: 0000:00:02, legacy-igd=1,by the way,here is the full code: args: -device 'qemu-xhci,addr=0x18' -drive 'id=synoboot,file=/root/synoboot701fo.img,if=none,format=raw' -device 'usb-storage,id=synoboot,drive=synoboot,bootindex=0' bios: ovmf boot: order=sata0;ide2;net0 cores: 4 cpu: host efidisk0: local-lvm:vm-101-disk-1,size=4M hostpci0: 0000:00:02,legacy-igd=1 ide2: none,media=cdrom memory: 12000 net0: e1000e=BE:0F:6F:02:39:48,bridge=vmbr0,firewall=1 net1: e1000e=F2:21:D3:30:E7:AE,bridge=vmbr0,firewall=1 numa: 0 ostype: l26 sata0: local-lvm:vm-101-disk-0,size=32G scsihw: virtio-scsi-pci serial0: socket smbios1: uuid=b33f1107-a6de-4bc1-848c-0e00dc7d0542 sockets: 2 vcpus: 8 vga: none vmgenid: fca33db9-1087-446b-9a57-e1424171250e after this operation, it works. 1 Link to comment Share on other sites More sharing options...
ct85msi Posted September 28, 2021 Share #2022 Posted September 28, 2021 Did you update first to 7.0.1-42218 with .PAT and then you changed the usb boot drive with the new loader or viceversa ? Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2023 Posted September 28, 2021 2 minutes ago, ct85msi said: Did you update first to 7.0.1-42218 with .PAT and then you changed the usb boot drive with the new loader or viceversa ? You build the bootloader first and you boot it. The DSM will be in upgrade/install will ask you to "install" the pat file to update. 1 Link to comment Share on other sites More sharing options...
Amoureux Posted September 28, 2021 Share #2024 Posted September 28, 2021 @OrphéeI found my mistake. I forgot change to 7.0.1-42218 1 Link to comment Share on other sites More sharing options...
Orphée Posted September 28, 2021 Share #2025 Posted September 28, 2021 (edited) @WiteWulf As you already know, bad news, a DSM reboot made my VM crash at boot. still has CPU lockup issues... Luckily I made a snapshot this time... I'm able to revert to stable state. Edited September 28, 2021 by Orphée Link to comment Share on other sites More sharing options...
Recommended Posts