haydibe Posted September 21, 2021 Share #1826 Posted September 21, 2021 4 hours ago, root616 said: There is some thing wrong with v0.9 toolchain' UEFI boot, can not boot. Fallback to v0.8 uefi works fine. Neither the Dockerfile, nor the Makefile changed between v0.8 and v0.9. Thus nothing that would effect how the image is build or how the container runs was changed... You might want to clean your build cache and image cache and try 0.9 again. Link to comment Share on other sites More sharing options...
Shaun Blake Posted September 21, 2021 Share #1827 Posted September 21, 2021 (edited) Hi, I'm hoping someone can give me a pointer. I couldn't find anything related by searching the thread so I thought I'd post the issue I'm running into. I'm attempting to go through the install process. It gets through 100% and then starts a 10 minutes countdown. At that point the vm restarts and I manually choose the SATA boot option. The countdown ends and says "something went wrong" with the option to "connect again". It then takes me back to a similar page as the install, but it says: Welcome Back! We've detected that you had moved the hard drives to a new DS3615xs. Please click Recover if you want to recover your data and settings now. If I click the Recover button, it goes through an install process and jumps from 1%,2%, then 100% quickly and gives another 10 minute countdown that ends in the same way. Details: I'm using virt-manager to create a QEMU/KVM vm. I use the e1000e nic with NAT and two sata hard drives. The first has the redpill bromolow 7.0-41222 image, and the second is a new qcow2 disk. I've also added a couple of serial ports dumping out to a file. When I look at the output from the first serial port when it reboots after the install, it seems to boot similarly to the first boot and ends with "Diskstation login:" and nothing more gets logged. Any ideas on what I'm missing? Edited September 21, 2021 by Shaun Blake Link to comment Share on other sites More sharing options...
toyanucci Posted September 21, 2021 Share #1828 Posted September 21, 2021 (edited) 2 hours ago, haydibe said: Neither the Dockerfile, nor the Makefile changed between v0.8 and v0.9. Thus nothing that would effect how the image is build or how the container runs was changed... You might want to clean your build cache and image cache and try 0.9 again. I can confirm something is wrong with 0.9. It's the version I initially tried and the usb was not bootable. When I changed to 0.74 the USB was bootable. I'm on a UEFI only motherboard. Edited September 21, 2021 by toyanucci Link to comment Share on other sites More sharing options...
root616 Posted September 22, 2021 Share #1829 Posted September 22, 2021 (edited) 5 hours ago, toyanucci said: I can confirm something is wrong with 0.9. It's the version I initially tried and the usb was not bootable. When I changed to 0.74 the USB was bootable. I'm on a UEFI only motherboard. Yes! It's not bootable, and I noticed the v0.9 uefi boot files are different from v0.8 or other uefi bootable toolchain version. Edited September 22, 2021 by root616 Link to comment Share on other sites More sharing options...
root616 Posted September 22, 2021 Share #1830 Posted September 22, 2021 9 hours ago, nemesis122 said: hmm is a little bit strange ony my Asus h87iplus 1.04 loader it is working but redpill 918 not found in LAN. I have Intel X520 SFP+ networkadapter maybe this is the problem ? You may need add the network adapter's driver by yourself. Link to comment Share on other sites More sharing options...
xPalito93 Posted September 22, 2021 Share #1831 Posted September 22, 2021 (edited) The redpill is new to me, so two days ago i decided to give it a go and look if i could get a test rig running. I tried the 0.8 and 0.9 tool and both would not work. The USB stick was never bootable. So i downloaded a precompiled image i found a couple pages back and tried it. Everything worked flawlessly after changing Pid, Vid and Mac address. I inspected both images by mounting the first partition with OSFmount ( the one i downloaded and those that i made myself with the tool ) and I noticed there were two folders missing.Both folders were the cause why it wouldn't boot. After copying the missing two folders to my image i build, everything worked without any issues and my test rig is running 7.0 since yesterday So unless I'm doing something wrong, both the 0.8 and 0.9 don't add the UEFI stuff to the image for me All i did was ./redpill_tool_chain.sh build apollolake-xxx and then ./redpill_tool_chain.sh auto apollolake-xxx Am i doing something wrong? Edited September 22, 2021 by xPalito93 Typo Link to comment Share on other sites More sharing options...
nemesis122 Posted September 22, 2021 Share #1832 Posted September 22, 2021 (edited) 13 minutes ago, xPalito93 said: The redpill is new to me, so two days ago i decided to give it a go and look if i could get a test rig running. I tried the 0.8 and 0.9 tool and both would not work. The USB stick was never bootable. So i downloaded a precompiled image i found a couple pages back and tried it. Everything worked flawlessly after changing Pid, Vid and Mac address. I inspected both images by mounting the first partition with OSFmount ( the one i downloaded and those that i made myself with the tool ) and I noticed there were two folders missing.Both folders were the cause why it wouldn't boot. After copying the missing two folders to my image i build, everything worked without any issues and my test rig is running 7.0 since yesterday So unless I'm doing something wrong, both the 0.8 and 0.9 don't add the UEFI stuff to the image for me All i did was ./redpill_tool_chain.sh build apollolake-xxx and then ./redpill_tool_chain.sh auto apollolake-xxx Am i doing something wrong? i have build 20.09.2021 the loader for 918 redpill-DS918+_7.0.1-42214_b1632160709.img and can confirm that uefi was not booting. Edited September 22, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
jumkey Posted September 22, 2021 Share #1833 Posted September 22, 2021 uefi is just a test, not in the main branch https://github.com/RedPill-TTG/redpill-load/pull/28 Link to comment Share on other sites More sharing options...
haydibe Posted September 22, 2021 Share #1834 Posted September 22, 2021 8 hours ago, toyanucci said: I can confirm something is wrong with 0.9. It's the version I initially tried and the usb was not bootable. When I changed to 0.74 the USB was bootable. I'm on a UEFI only motherboard. 3 hours ago, root616 said: Yes! It's not bootable, and I noticed the v0.9 uefi boot files are different from v0.8 or other uefi bootable toolchain version. This doesn't add up.... The toochain builder does exactly nothing to either support or prevent uefi, this is part of what redpill-load does. So far I understand your post as "the toolchain builder uses a redpill-load version that lacks the features that have been previously there". The toolchain can and will not influence how redpill-lkm and redpill-load work. Never did, never will! 2 Link to comment Share on other sites More sharing options...
ct85msi Posted September 22, 2021 Share #1835 Posted September 22, 2021 Uefi support is added only in jumkey`s branch. Only those who used the default configs to use jumkey`s branch for 7.0.1 RC had UEFI support in global_config.json. haydibe removed the lines for 7.0.1 in global_config.json from v0.8 and left only TTG`s github repos. 1 Link to comment Share on other sites More sharing options...
nemesis122 Posted September 22, 2021 Share #1836 Posted September 22, 2021 (edited) I have this Networkadapter Intel® Ethernet-Converged-Network-Adapter X520-DA2 please help me to add this driver to DSM 918+ Redpill Loader How can i add this driver to the image or to the maschine ? thank you ixgbe-5.12.5.tar.gz Edited September 22, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
nemesis122 Posted September 22, 2021 Share #1837 Posted September 22, 2021 i found here the driver for me in this thread but how can i addit now in the image or to the maschine ? thanks On 9/9/2021 at 5:48 PM, snowfox said: How to build intel 10G netcard driver to *.ko ? synology can't run "make" command!no kernel-devel! Can you help me build it for 7.0.1 ?tks ixgbe-5.12.5.tar.gz 506 kB · 5 downloads Link to comment Share on other sites More sharing options...
nemesis122 Posted September 22, 2021 Share #1838 Posted September 22, 2021 (edited) On 9/9/2021 at 7:03 PM, yanjun said: ixgbe.ko.gz 3.31 MB · 48 downloads ixgbevf.ko 84.3 kB · 42 downloads for 918+ 7.0.1 test fine. i found it but how can i add to the image or to Maschine? thank you Edited September 22, 2021 by nemesis122 more info Link to comment Share on other sites More sharing options...
stefauresi Posted September 22, 2021 Share #1839 Posted September 22, 2021 Il y a 14 heures, D.S a dit : I have experience on Aquantia (Qnap QXG-10G1T), I tried to put different version of driver (included compiled by myself) to the loader, but none of them is working. However, after installed DSM, just create a script and upload to "/usr/lib/modules-load.d/" then copy atlantic.ko to "/usr/lib/modules/", reboot and it will works. I attached the files if needed. AQC107_0921.zip 3 Mo · 9 downloads hi, I try this but it's not good for me why atlantic.ko in your archive = 10Mo and atlantic.ko for 6.2.3 = 185ko Link to comment Share on other sites More sharing options...
dhlsam Posted September 22, 2021 Share #1840 Posted September 22, 2021 newbee here, using v0.9 toolchain' UEFI boot ,918+ 7.01 usb loader works fine that I can find ip ,but hdd error in 2nd step. my motherboard is z370n wifi,there are two m.2 connector,one of m.2 support SATA and PCIe x4/x2 SSD(M2A_32G) and 4 sata port (sata2-sata5 in bios), trying to change DiskIdxMap=00 SataPortMap=4 SasIdxMap=0 or DiskIdxMap=0400 SataPortMap=01 SasIdxMap=0,still doesn't work Link to comment Share on other sites More sharing options...
u357 Posted September 22, 2021 Share #1841 Posted September 22, 2021 35 minutes ago, dhlsam said: newbee here, using v0.9 toolchain' UEFI boot ,918+ 7.01 usb loader works fine that I can find ip ,but hdd error in 2nd step. my motherboard is z370n wifi,there are two m.2 connector,one of m.2 support SATA and PCIe x4/x2 SSD(M2A_32G) and 4 sata port (sata2-sata5 in bios), trying to change DiskIdxMap=00 SataPortMap=4 SasIdxMap=0 or DiskIdxMap=0400 SataPortMap=01 SasIdxMap=0,still doesn't work 35 minutes ago, dhlsam said: I thought you have 4 sata plug into the motherboard, so i told you to use SataPortMap=4, Try to plug in only 1 sata drive and use SataPortMap=1, DiskIdxMap=00 Or OC just give it a try Link to comment Share on other sites More sharing options...
jumkey Posted September 22, 2021 Share #1842 Posted September 22, 2021 1 hour ago, nemesis122 said: i found it but how can i add to the image or to Maschine? thank you https://man.archlinux.org/man/modules-load.d.5 and depmod -a Link to comment Share on other sites More sharing options...
D.S Posted September 22, 2021 Share #1843 Posted September 22, 2021 1 hour ago, stefauresi said: hi, I try this but it's not good for me why atlantic.ko in your archive = 10Mo and atlantic.ko for 6.2.3 = 185ko Did you copy them to DSM or the loader? It won’t work if put into loader. Don’t know why the file size become so big, the file provided by other people is similar size as well. Link to comment Share on other sites More sharing options...
stefauresi Posted September 22, 2021 Share #1844 Posted September 22, 2021 il y a une heure, D.S a dit : Did you copy them to DSM or the loader? It won’t work if put into loader. Don’t know why the file size become so big, the file provided by other people is similar size as well. In DSM with SSH .conf in /usr/lib/modules-load.d/ .ko in /usr/lib/modules/ chmod 644 for .conf and .ko reboot and don't work Link to comment Share on other sites More sharing options...
pocopico Posted September 22, 2021 Share #1845 Posted September 22, 2021 16 minutes ago, stefauresi said: In DSM with SSH .conf in /usr/lib/modules-load.d/ .ko in /usr/lib/modules/ chmod 644 for .conf and .ko reboot and don't work while in ssh with root run # depmod -a # modprobe atlantic verify module is loaded with # lsmod |grep -i atlantic If it didn't load do a # insmod /usr/lib/modules/atlantic.ko and verify again. If it doesnt load check dmesg output to see whats wrong 1 Link to comment Share on other sites More sharing options...
cqranjiian Posted September 22, 2021 Share #1846 Posted September 22, 2021 (edited) How do I turn the built-in sata into an external esata? I don't have to modify the profile. Edited September 22, 2021 by cqranjiian Link to comment Share on other sites More sharing options...
nemesis122 Posted September 22, 2021 Share #1847 Posted September 22, 2021 I have Asus h87iplus with 6 sata ports and the hdd are on 1-5 5x6tb how i have to set the grub.cfg for sata? thank you Link to comment Share on other sites More sharing options...
stefauresi Posted September 22, 2021 Share #1848 Posted September 22, 2021 (edited) il y a une heure, pocopico a dit : while in ssh with root run # depmod -a # modprobe atlantic verify module is loaded with # lsmod |grep -i atlantic If it didn't load do a # insmod /usr/lib/modules/atlantic.ko and verify again. If it doesnt load check dmesg output to see whats wrong depmod -a = -ash: depmod: command not found lsmod |grep -i atlantic = nothing insmod /usr/lib/modules/atlantic.ko lsmod |grep -i atlantic atlantic 200285 0 crc_itu_t 1531 2 udf,atlantic but no ethernet connexion other problem , if i put mac2:xxxxxxxxxx in grub.cfg , it is not supported , i show only mac1 in DSM Edited September 22, 2021 by stefauresi Link to comment Share on other sites More sharing options...
pocopico Posted September 22, 2021 Share #1849 Posted September 22, 2021 @stefauresi Well... can you check lspci -k Link to comment Share on other sites More sharing options...
stefauresi Posted September 22, 2021 Share #1850 Posted September 22, 2021 il y a 5 minutes, pocopico a dit : @stefauresi Well... can you check lspci -k 0000:01:00.0 Class 0200: Device 1d6a:07b1 (rev 02) Subsystem: Device 1043:8741 Kernel driver in use: atlantic Link to comment Share on other sites More sharing options...
Recommended Posts