nemesis122 Posted September 21, 2021 Share #1801 Posted September 21, 2021 (edited) redpill-tool-chain_x86_64_v0.9.zip found it sorry Edited September 21, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
WowaDriver Posted September 21, 2021 Share #1802 Posted September 21, 2021 36 minutes ago, Orphée said: https://github.com/RedPill-TTG/redpill-lkm/issues/19 Yes thanks i know this issue, but i hoped that somebody have new insider informations about a possible workaround... so i still have to wait on 6.2.3 Link to comment Share on other sites More sharing options...
pocopico Posted September 21, 2021 Share #1803 Posted September 21, 2021 2 minutes ago, WowaDriver said: Yes thanks i know this issue, but i hoped that somebody have new insider informations about a possible workaround... so i still have to wait on 6.2.3 I dont know about unraid but on esxi i prefer to just passthrough the disks and not the HBA itself. This way i can set the disks to SATA and i dont bother about the SCSI issue for the moment. 1 Link to comment Share on other sites More sharing options...
toyanucci Posted September 21, 2021 Share #1804 Posted September 21, 2021 (edited) 5 hours ago, Rabby said: First restart was about 10 minutes after install, but I didn't try it again. FYI, 6.2 with JUN's loader took 8-10 minutes on the same motherboard. Booting with Jun's loader on my ASRock J4105 motherboard is 2 minutes or less... But with redpill I can't get any network activity even though others with similar boards have reported it working 🤷🏾♂️ Edited September 21, 2021 by toyanucci Link to comment Share on other sites More sharing options...
nk950357 Posted September 21, 2021 Share #1805 Posted September 21, 2021 (edited) 5 hours ago, someone1 said: Did not help. Did a full wipe of the DSM after i changed the CPU to Haswell. Getting some error messages ash-4.4# cat /var/log/messages | grep photo 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so facing same problem here, but mine is bare device, with i5 4570 and ds918+ is there any fix right now? 55 minutes ago, Null said: synology today updated the photo suite to fix the problem of face recognition Tried latest Synology Photos, keep giving me same error 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init 2021-09-21T19:31:55+08:00 Synology_DS918 synofoto-face-extraction[17020]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so Edited September 21, 2021 by nk950357 Link to comment Share on other sites More sharing options...
Orphée Posted September 21, 2021 Share #1806 Posted September 21, 2021 (edited) 6 minutes ago, pocopico said: I dont know about unraid but on esxi i prefer to just passthrough the disks and not the HBA itself. This way i can set the disks to SATA and i dont bother about the SCSI issue for the moment. You then have no SMART support inside DSM. Whereas HBA passtrough (on 6.2.3) makes SMART work inside DSM. So real DSM monitoring in case a disk dies. Edited September 21, 2021 by Orphée 1 1 Link to comment Share on other sites More sharing options...
nemesis122 Posted September 21, 2021 Share #1807 Posted September 21, 2021 (edited) my config looks like this but { "extra_cmdline": { "pid": "0x0001", "vid": "0x46f4", "sn": "1330LWNXXXXXX", "mac1": "001132XXXXXX", "DiskIdxMap": "1000", "SataPortMap": "4", }, "synoinfo": { "supportsystemperature": "no", "supportsystempwarning": "no" }, "ramdisk_copy": {} } i need to add the second Networkdapater mac 2 and netif2 are there some other parameters as we have a list ? is this correct like this : { "extra_cmdline": { "pid": "0x0001", "vid": "0x46f4", "sn": "1330LWNXXXXXX", "mac1": "001132XXXXXX", "mac2": "001133XXXXXX", "netif_num": "2", "DiskIdxMap": "1000", "SataPortMap": "4", }, "synoinfo": { "supportsystemperature": "no", "supportsystempwarning": "no" }, "ramdisk_copy": {} } thank you Edited September 21, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
stefauresi Posted September 21, 2021 Share #1808 Posted September 21, 2021 Il y a 21 heures, Rabby a dit : Works well on my ASROCK 3455B-ITX, thanks very much. Although I discovered that the SYNOLOGY DRIVE SERVER and OFFICE packages cannot be installed. (I didn't try all, maybe there are still some more) hi, I have no problem with OFFICE or other package . I testing baremetal from scratch, it's ok but i have a question,it's possible to migrate my old install 6.2.3 to 7.0.1 ? best regard Link to comment Share on other sites More sharing options...
shibby Posted September 21, 2021 Share #1809 Posted September 21, 2021 49 minutes ago, stefauresi said: it's possible to migrate my old install 6.2.3 to 7.0.1 yes, it does. The same way as you made fresh instalation of 7.0.x Link to comment Share on other sites More sharing options...
root616 Posted September 21, 2021 Share #1810 Posted September 21, 2021 On 9/17/2021 at 4:08 AM, haydibe said: Everytime when I think, there is nothing left to optimize on the toolchain builder someone commes around and finds something that makes sense to be added... Thus said, here is the v0.9 of the toolchain builder. - added sha256 cheksum for kernel and toolkit-dev downloads in `global_config.json`. The item `"download_urls"` is renamed to `"downloads"` and has a new structure. Make sure to allign your custom <platform version> configurations to the new structure when copying them into the `global_config.json` - check checksum of kernel or toolkit-dev when building the image and fail if checksums missmatch. Will not delete the corrupt file! - added`"docker.custom_bind_mounts"` in `global_config.json` to add as many custom bind-mounts as you want, set `"docker.use_custom_bind_mounts":` to `"true"` enable the feature. - fixed: only download kernel or toolkit-dev required to build the image (always downloaded both before, but only used either one of them when building the image) - added simple precondition check to see if required tools are available See README.md for usage. redpill-tool-chain_x86_64_v0.9.zip 9.32 kB · 247 downloads There is some thing wrong with v0.9 toolchain' UEFI boot, can not boot. Fallback to v0.8 uefi works fine. Link to comment Share on other sites More sharing options...
Orphée Posted September 21, 2021 Share #1811 Posted September 21, 2021 I tried to install Proxmox 7.0 VE on my Gen8... I did not succeed to install Jun's 6.2.3 loader even with tutorials, install failed at 57% (error 13)... I was also aware of a PCI passthrough issue with Gen6/7/8 so I tried to add my LSI card as passthrough, the VM did not want to start (operation not permitted) the fix there (the PR from issue comment for Proxmox7) did not work for me : https://github.com/kiler129/relax-intel-rmrr/blob/master/README.md#configuration So I'll stick to ESXi and wait for HBA passthrough fix from @ThorGroup Link to comment Share on other sites More sharing options...
D.S Posted September 21, 2021 Share #1812 Posted September 21, 2021 Finally got everything (10G, 2.5G Lan & NVme SSD Cache) work perfectly on 918+ at DSM 7.0.1 except UHD 630, does anyone could provide a guideline to compile i915 driver and firmware for Intel 10th CPU? Link to comment Share on other sites More sharing options...
stefauresi Posted September 21, 2021 Share #1813 Posted September 21, 2021 Hi, I need your help for add the driver for ASUS XG-C100C ( aquantia ) Best regard Link to comment Share on other sites More sharing options...
pocopico Posted September 21, 2021 Share #1814 Posted September 21, 2021 7 minutes ago, stefauresi said: Hi, I need your help for add the driver for ASUS XG-C100C ( aquantia ) Best regard Hi, what version are you using ? Drivers are kernel specific, Are you looking for 3615 or 918+ ? 1 Link to comment Share on other sites More sharing options...
stefauresi Posted September 21, 2021 Share #1815 Posted September 21, 2021 il y a 1 minute, pocopico a dit : Hi, what version are you using ? Drivers are kernel specific, Are you looking for 3615 or 918+ ? see my signature 😉 Link to comment Share on other sites More sharing options...
WiteWulf Posted September 21, 2021 Share #1816 Posted September 21, 2021 2 minutes ago, stefauresi said: see my signature 😉 FYI, signatures aren't visible to users on mobile devices. 2 Link to comment Share on other sites More sharing options...
stefauresi Posted September 21, 2021 Share #1817 Posted September 21, 2021 (edited) il y a 3 minutes, WiteWulf a dit : FYI, signatures aren't visible to users on mobile devices. ok DS918+ Loader redpill-DS918+_7.0.1-42214_b1630747150 - DSM 7.0.1-42214 Intel® I219V and Intel® I211AT it's ok but I want use my 10G ethernet Edited September 21, 2021 by stefauresi Link to comment Share on other sites More sharing options...
WiteWulf Posted September 21, 2021 Share #1818 Posted September 21, 2021 Sorry for going off topic for a moment, but I see a few people wanting 10GB ethernet. I wonder, do you have a 10GB ethernet switch, and any other 10GB capable devices on your LAN (or multiple 1Gb clients capable needing an aggregate 10GB throughput)? Do you even have a storage array capable of saturating a 10GB link? Just wondering what the use case is for hardware like this, as it's the sort of thing that's very rarely properly utilised outside of datacentres... 2 Link to comment Share on other sites More sharing options...
stefauresi Posted September 21, 2021 Share #1819 Posted September 21, 2021 il y a 1 minute, WiteWulf a dit : Sorry for going off topic for a moment, but I see a few people wanting 10GB ethernet. I wonder, do you have a 10GB ethernet switch, and any other 10GB capable devices on your LAN (or multiple 1Gb clients capable needing an aggregate 10GB throughput)? Do you even have a storage array capable of saturating a 10GB link? Just wondering what the use case is for hardware like this, as it's the sort of thing that's very rarely properly utilised outside of datacentres... My internet connection = 8G Switch mikrotik SFP+ 10G / with RJ45 ethernet module Yes 10G it's necessary for me 😉 Link to comment Share on other sites More sharing options...
pocopico Posted September 21, 2021 Share #1820 Posted September 21, 2021 13 minutes ago, stefauresi said: ok DS918+ Loader redpill-DS918+_7.0.1-42214_b1630747150 - DSM 7.0.1-42214 Intel® I219V and Intel® I211AT it's ok but I want use my 10G ethernet Few posts back .. did you try that and didn't work ? Link to comment Share on other sites More sharing options...
Orphée Posted September 21, 2021 Share #1821 Posted September 21, 2021 Just now, stefauresi said: My internet connection = 8G Switch mikrotik SFP+ 10G / with RJ45 ethernet module Yes 10G it's necessary for me 😉 necessary ? You must mean "would be a plus", no ? are your disks fast enough to handle it ? 1 Link to comment Share on other sites More sharing options...
stefauresi Posted September 21, 2021 Share #1822 Posted September 21, 2021 il y a 4 minutes, pocopico a dit : Few posts back .. did you try that and didn't work ? Thanks , but i'am not a dev , where inject this driver in loader ? Link to comment Share on other sites More sharing options...
WiteWulf Posted September 21, 2021 Share #1823 Posted September 21, 2021 8 minutes ago, stefauresi said: My internet connection = 8G Switch mikrotik SFP+ 10G / with RJ45 ethernet module Yes 10G it's necessary for me 😉 You have 8GB internet at home 😮 I mean, my workplace has 40Gb/s, but we do 100Gb/s across the campus backbone, 20Gb/s to the distribution layer and 1Gb/s to most edge devices. My personal NAS (running Plex) hosted at work is on a teamed 2x1Gb link and the 8 disk array in that can't saturate that link. What do you *do* with 8Gb? 🤣 Link to comment Share on other sites More sharing options...
D.S Posted September 21, 2021 Share #1824 Posted September 21, 2021 37 minutes ago, stefauresi said: Hi, I need your help for add the driver for ASUS XG-C100C ( aquantia ) Best regard I have experience on Aquantia (Qnap QXG-10G1T), I tried to put different version of driver (included compiled by myself) to the loader, but none of them is working. However, after installed DSM, just create a script and upload to "/usr/lib/modules-load.d/" then copy atlantic.ko to "/usr/lib/modules/", reboot and it will works. I attached the files if needed. AQC107_0921.zip Link to comment Share on other sites More sharing options...
nemesis122 Posted September 21, 2021 Share #1825 Posted September 21, 2021 hmm is a little bit strange ony my Asus h87iplus 1.04 loader it is working but redpill 918 not found in LAN. I have Intel X520 SFP+ networkadapter maybe this is the problem ? Link to comment Share on other sites More sharing options...
Recommended Posts