apriliars3 Posted September 19, 2021 Share #1751 Posted September 19, 2021 9 minutes ago, Amoureux said: Red.vmx.zip 1.67 kB · 0 downloads I don´t know how to works scsi disks, but with new sata disk, all work with my VMWare virtual machine DS3615xs 7.0.1-42214 Link to comment Share on other sites More sharing options...
Amoureux Posted September 19, 2021 Share #1752 Posted September 19, 2021 7 минут назад, apriliars3 сказал: I don´t know how to works scsi disks, but with new sata disk, all work with my VMWare virtual machine DS3615xs 7.0.1-42214 You used StarWond V2V Converter for create pre-alloceted image? Link to comment Share on other sites More sharing options...
kaykkay Posted September 20, 2021 Share #1753 Posted September 20, 2021 On 9/18/2021 at 9:24 PM, WiteWulf said: Everyone that's contacted me so far has been using either Xeon or Celeron CPUs, I've not heard from anyone with non-Intel CPU so far. Also, I (and others) extensively used docker on 6.2.3 and earlier versions on Jun's boot loader. These problems have only been observed on DSM 6.2.4 and 7.x since moving to redpill, and only on DS3615xs. I saw something post a success on HP Gen 7, which should be using AMD CPU. 1 Link to comment Share on other sites More sharing options...
u357 Posted September 20, 2021 Share #1754 Posted September 20, 2021 7 hours ago, toyanucci said: I'm using the ASRock J4105 ITX motherboard. The network card it uses is the Realtek RTL8111H. I guess the problem is the NIC...I just assumed it worked but I guess I'll need to get a compatible one. I'll search the thread when I get home or if you have any recommendations I'd appreciate it! if you are using a router, try to see is there a new connection named Diskstation , use the ip address to connect with browser, it will show more informations. If it didn't show up, that you need to check the cpu you are using if that meets the minimium requirment of 918+ or 3615xs. Mostly 918+ needs Haswell or newer versions. Check the Lan port light are they showing normal, it should be a yellow and green light blinking while ilthe kernel is running, if there is no blinking, it is not possible to connect no matter how long are you waiting to connect from another browser, check it step by step to sort the problems Link to comment Share on other sites More sharing options...
datahunter Posted September 20, 2021 Share #1755 Posted September 20, 2021 RedPill is a great project !! I love it. I think i hit a bug on the kernel module or dsm Issure: I running DS3615xs/6.2.4-25556 on Debian 10 with Qemu The VM instance 's NIC has abnormal traffic. Any materials i need to provide for debug ? Link to comment Share on other sites More sharing options...
apriliars3 Posted September 20, 2021 Share #1756 Posted September 20, 2021 You used StarWond V2V Converter for create pre-alloceted image?Yes Link to comment Share on other sites More sharing options...
Amoureux Posted September 20, 2021 Share #1757 Posted September 20, 2021 39 минут назад, apriliars3 сказал: Yes So i after converting and start on VMware Fusion have a scsi disk with the loader. What's wrrong? Link to comment Share on other sites More sharing options...
apriliars3 Posted September 20, 2021 Share #1758 Posted September 20, 2021 So i after converting and start on VMware Fusion have a scsi disk with the loader. What's wrrong?I add only sata disks, with SCSI or NVME to me not works. Link to comment Share on other sites More sharing options...
Amoureux Posted September 20, 2021 Share #1759 Posted September 20, 2021 4 минуты назад, apriliars3 сказал: I add only sata disks, with SCSI or NVME to me not works. Scsi for me was added automatically. Scsi disk contains bootloader. Link to comment Share on other sites More sharing options...
ct85msi Posted September 20, 2021 Share #1760 Posted September 20, 2021 9 hours ago, toyanucci said: I'm using the ASRock J4105 ITX motherboard. The network card it uses is the Realtek RTL8111H. I guess the problem is the NIC...I just assumed it worked but I guess I'll need to get a compatible one. I'll search the thread when I get home or if you have any recommendations I'd appreciate it! My system, J3455B-ITX boots in aprox ~ 10 minutes. Wait more time. Link to comment Share on other sites More sharing options...
man275 Posted September 20, 2021 Share #1761 Posted September 20, 2021 Anyone tried DS918+ 6.2.4 with the latest ESXi 7.0U2d? I used redpill-tool-chain_x86_64_v0.9.zip to build bootloader. SataPortMap=18 and DiskIdxMap=1000 configured for two attached vmdks (sata0:0 for bootloader sata1:0 for dsm installation having 50-100GB) It always failed with the file corrupted error (13) during DSM installation. Instead of compiling myself, I also tried someone else's after modifying grub.cfg but result was the same. Link to comment Share on other sites More sharing options...
u357 Posted September 20, 2021 Share #1762 Posted September 20, 2021 you have to install through browser, synology assistant install won't work Link to comment Share on other sites More sharing options...
pocopico Posted September 20, 2021 Share #1763 Posted September 20, 2021 55 minutes ago, man275 said: Anyone tried DS918+ 6.2.4 with the latest ESXi 7.0U2d? I used redpill-tool-chain_x86_64_v0.9.zip to build bootloader. SataPortMap=18 and DiskIdxMap=1000 configured for two attached vmdks (sata0:0 for bootloader sata1:0 for dsm installation having 50-100GB) It always failed with the file corrupted error (13) during DSM installation. Instead of compiling myself, I also tried someone else's after modifying grub.cfg but result was the same. While on grub, you have to select either manually or edit grub.cfg so that by default it boots with the second option which is SATA. If you dont have a second option you can A. rebuilt the loader with latest additions or B. manually edit grub.cfg and add synoboot_satadom=2 in the linux /zImage line. Link to comment Share on other sites More sharing options...
man275 Posted September 20, 2021 Share #1764 Posted September 20, 2021 (edited) 20 minutes ago, u357 said: you have to install through browser, synology assistant install won't work Always used via browser. Thanks for the reply. 9 minutes ago, pocopico said: While on grub, you have to select either manually or edit grub.cfg so that by default it boots with the second option which is SATA. If you dont have a second option you can A. rebuilt the loader with latest additions or B. manually edit grub.cfg and add synoboot_satadom=2 in the linux /zImage line. It always shows two choices on boot, usb or sata. And tried usb by default. I will search what synoboot_satadom=2 is and try with that. Thanks. Edited September 20, 2021 by man275 Link to comment Share on other sites More sharing options...
pocopico Posted September 20, 2021 Share #1765 Posted September 20, 2021 (edited) 13 hours ago, toyanucci said: I'm using the ASRock J4105 ITX motherboard. The network card it uses is the Realtek RTL8111H. I guess the problem is the NIC...I just assumed it worked but I guess I'll need to get a compatible one. I'll search the thread when I get home or if you have any recommendations I'd appreciate it! You will need to add manually the kernel module, for bromolow 3615xs, try with the attached: r8169.ko.7z Two modules are attached mii.ko and rtl8169.ko. First load mii.ko and then rtl8169.ko the process for RAMdisk copy is explained on GitHub https://github.com/RedPill-TTG/redpill-load/blob/master/FOR_DEVS.md For 918+ which will suit your CPU capabilities better, you the module r8168.ko is already included in the loader and should work for 8111H Edited September 20, 2021 by pocopico Link to comment Share on other sites More sharing options...
Amoureux Posted September 20, 2021 Share #1766 Posted September 20, 2021 (edited) Friends, I have had some success in launching dsm with a RedPill and VMware Fusion on my mac. The new problem is that now the system says that it cannot format the hdd's . Edited September 20, 2021 by Amoureux Link to comment Share on other sites More sharing options...
toyanucci Posted September 20, 2021 Share #1767 Posted September 20, 2021 (edited) 8 hours ago, u357 said: if you are using a router, try to see is there a new connection named Diskstation , use the ip address to connect with browser, it will show more informations. If it didn't show up, that you need to check the cpu you are using if that meets the minimium requirment of 918+ or 3615xs. Mostly 918+ needs Haswell or newer versions. Check the Lan port light are they showing normal, it should be a yellow and green light blinking while ilthe kernel is running, if there is no blinking, it is not possible to connect no matter how long are you waiting to connect from another browser, check it step by step to sort the problems The cpu works with 918+ on Jun's loader and many report it working here. The orange lan light is blinking infrequently... I had a static route setup for device (just testing that redpill works for me first) which I just removed and I'm now seeing a diskstation device in dhcp request but the page isn't loading when I try to access it. It seems the diskstation device showing in the dhcp list may be from an attempt I made yesterday and not from the attempt I'm currently making. I had made several attempts with different images so I guess at least one of them must've worked. Edited September 20, 2021 by toyanucci Link to comment Share on other sites More sharing options...
pocopico Posted September 20, 2021 Share #1768 Posted September 20, 2021 12 minutes ago, Amoureux said: Friends, I have had some success in launching dsm with a RedPill and VMware Fusion on my mac. The new problem is that now the system says that it cannot format the hdd's . I would change the redpill loader to sata0.0 and data disk to sata1.0 which i have verified that works. I was not able to install with the redpill set to IDE or SCSI. Link to comment Share on other sites More sharing options...
Buny74 Posted September 20, 2021 Share #1769 Posted September 20, 2021 Hi guys, I'm actually on baremetal with my G8 and i plan to update to DSM 7.0.1 but i'm actually on a 3617 base. If i build for a 3615 will it be possible to update my server from a 3617 ? Thanks Link to comment Share on other sites More sharing options...
toyanucci Posted September 20, 2021 Share #1770 Posted September 20, 2021 6 hours ago, ct85msi said: My system, J3455B-ITX boots in aprox ~ 10 minutes. Wait more time. The initial boot takes 10 minutes to load the kernel or does every boot take 10 minutes? Link to comment Share on other sites More sharing options...
Amoureux Posted September 20, 2021 Share #1771 Posted September 20, 2021 (edited) 53 минуты назад, pocopico сказал: I would change the redpill loader to sata0.0 and data disk to sata1.0 which i have verified that works. I was not able to install with the redpill set to IDE or SCSI. I have redpill loader set to sata0.0 and data disk set to sata1.0 Stopped at 55%. PID/VID incorrect ? "pid": "0x0001", "vid": "0x46f4", Surprisingly, the installation was successful in the sata-dom mode.🤣 Edited September 20, 2021 by Amoureux Link to comment Share on other sites More sharing options...
ct85msi Posted September 20, 2021 Share #1772 Posted September 20, 2021 3 minutes ago, toyanucci said: The initial boot takes 10 minutes to load the kernel or does every boot take 10 minutes? every boot. 1 Link to comment Share on other sites More sharing options...
pocopico Posted September 20, 2021 Share #1773 Posted September 20, 2021 11 minutes ago, Amoureux said: I have redpill loader set to sata0.0 and data disk set to sata1.0 Stopped at 55%. PID/VID incorrect ? "pid": "0x0001", "vid": "0x46f4", While at GRUB you need to select the second option for sata. If SATA is selected the vid:pid is ignored. Link to comment Share on other sites More sharing options...
Amoureux Posted September 20, 2021 Share #1774 Posted September 20, 2021 2 минуты назад, pocopico сказал: While at GRUB you need to select the second option for sata. If SATA is selected the vid:pid is ignored. Thanks. It's helpfully. Link to comment Share on other sites More sharing options...
WiteWulf Posted September 20, 2021 Share #1775 Posted September 20, 2021 49 minutes ago, Buny74 said: Hi guys, I'm actually on baremetal with my G8 and i plan to update to DSM 7.0.1 but i'm actually on a 3617 base. If i build for a 3615 will it be possible to update my server from a 3617 ? Thanks Yeah, it’ll identify the disks as being from another server and offer to do a migration for you. So long as you give it a pat file that matches the version and architecture you’ve built the boot image for you you’ll be fine. 1 Link to comment Share on other sites More sharing options...
Recommended Posts