jumkey Posted September 12, 2021 Share #1326 Posted September 12, 2021 2 hours ago, parotris said: In my case, 918 boot with original s/n and mac. Everything works perfect, even quick connect and transcode. Activation.conf is ok. But face detection fails... /var/log/messages synofoto-face-extraction[2372]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed synofoto-face-extraction[2372]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so /var/log/synofoto.log synofoto-face-extraction[2372]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init synofoto-face-extraction[2372]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so ¿Any idea? ¿Can you share the 3615 boot? Thanks. is your gpu passthrough? Link to comment Share on other sites More sharing options...
D.S Posted September 12, 2021 Share #1327 Posted September 12, 2021 4 hours ago, rok1 said: Has anyone tried this driver? Tested and it works. Link to comment Share on other sites More sharing options...
s2k7 Posted September 12, 2021 Share #1328 Posted September 12, 2021 Sure, lets assume I add the unmodified kernel sources, and you provide the commands required to inject those in an image created by redpill-load, it can be done. Contribute the required commands, and I bake them into the Makefile target "auto". Though if it's something where I would need to modify the redpill-load sources, then its a hard pass... Wait for your great docker to compile modules. We can help to test various devices together to push up a beta test.Tapatalk を使用して私の ELS-NX9 から送信 Link to comment Share on other sites More sharing options...
snowfox Posted September 12, 2021 Share #1329 Posted September 12, 2021 On 9/9/2021 at 5:39 PM, pocopico said: You do not need to recreate the whole loader. Just extract the rd, modify it (add the modules to usr/lib/modules, modify linuxrc.syno.impl to load the modules line #285) and repack it. Then copy it to the usb stick in place of the old one. For EFI its on the second usb stick partition for Legacy is on first partition. Unfortunately the legacy partition is small and thus there is not enough space for rd.gz how can imodify linuxrc.syno.impl (line #285) ? just add “insmod /lib/modules/ixgbe.ko” ? i put the ixgbe.ko to /usr/lib/modules Link to comment Share on other sites More sharing options...
snowfox Posted September 12, 2021 Share #1330 Posted September 12, 2021 On 9/9/2021 at 5:39 PM, pocopico said: You do not need to recreate the whole loader. Just extract the rd, modify it (add the modules to usr/lib/modules, modify linuxrc.syno.impl to load the modules line #285) and repack it. Then copy it to the usb stick in place of the old one. For EFI its on the second usb stick partition for Legacy is on first partition. Unfortunately the legacy partition is small and thus there is not enough space for rd.gz how can imodify linuxrc.syno.impl (line #285) ? just add “insmod /lib/modules/ixgbe.ko” ? i put the ixgbe.ko to /usr/lib/modules Link to comment Share on other sites More sharing options...
D.S Posted September 12, 2021 Share #1331 Posted September 12, 2021 18 hours ago, yanjun said: Just got atlantic.ko this. Just found the driver need module dependencies crc-itu-t.ko, could you upload it as well? Link to comment Share on other sites More sharing options...
parotris Posted September 12, 2021 Share #1332 Posted September 12, 2021 7 hours ago, jumkey said: is your gpu passthrough? Sorry, How can I see it? Link to comment Share on other sites More sharing options...
jumkey Posted September 12, 2021 Share #1333 Posted September 12, 2021 5 minutes ago, parotris said: Sorry, How can I see it? This means that there is no GPU passthrough ls /dev/dri ls: cannot access '/dev/dri': No such file or directory Link to comment Share on other sites More sharing options...
dreamtek Posted September 12, 2021 Share #1334 Posted September 12, 2021 (edited) Can someone compile the igbvf and ixgbevf driver for 918 7.0.1?I try to use sriov in pve and cant find the NIC now. Edit:Friend try it out but the file is little big. igbvf.ko Edited September 12, 2021 by dreamtek Link to comment Share on other sites More sharing options...
haydibe Posted September 12, 2021 Share #1335 Posted September 12, 2021 5 hours ago, s2k7 said: Wait for your great docker to compile modules. We can help to test various devices together to push up a beta test. I haven't followed the module compilation discussions in depth as my target environment (=proxmox) is supported out of the box. The build chain loader just follows the instructions of the respective git project, which made it easy to put into a dockerfile. Like I wrote before, I am not going to implemenet anything that needs to patch redpill-load sources on the fly. Those type of changes can be done in individual forks of redpill-load, you can simply point the repo url to your repo and be good. Everything else needs discussion via pm before I am able to descide wheter this is in scope of the tool chain builder or not. Everyone is free to modify the toochain builder as they need and can share those modifications here. 3 Link to comment Share on other sites More sharing options...
parotris Posted September 12, 2021 Share #1336 Posted September 12, 2021 27 minutes ago, jumkey said: This means that there is no GPU passthrough ls /dev/dri ls: cannot access '/dev/dri': No such file or directory Ok, mine is pssthrough card0 RenderD128 Link to comment Share on other sites More sharing options...
donmimo Posted September 12, 2021 Share #1337 Posted September 12, 2021 Can we get nvidia/nouvou drivers compiled? I have gpu pass through setup but due to lack of nvidia support from the kernel it can't be initialised. I am hoping to get /dev/dri accessable and hopfully face detection will work afterwards if /dev/dri is persent. Link to comment Share on other sites More sharing options...
snowfox Posted September 12, 2021 Share #1338 Posted September 12, 2021 Have I installed the network card driver correctly? Why can't I see the 10G network card in the network interface?Only see the 1G network card! Link to comment Share on other sites More sharing options...
rdidier75 Posted September 12, 2021 Share #1339 Posted September 12, 2021 Le 04/09/2021 à 12:24, tocinillo2 a dit : Compiled 7.0.1 with last BSP patch and works perfect https://drive.google.com/file/d/1CqqhO-TBdwOff0dH54iP-XPdrhzgvtNR/view?usp=sharing - Add UEFI support. - Deleted twice EFI folder. - Fixed SynoBoot_EFI place. - Compiled with last BSP Patch for 7.0.1. - Insmod efi_gop into EFI. - Tested with Baremetal and works fine (Astock 3455-ITX). - After installation (the reboot process can take 15-20 minutes) you have to install File Station manually: https://www.synology.com/en-us/support/download/DS918+#system (select DSM 7.0), find and download File Station SPK and install it in Package Center. Whaou ! Works great for me … from 6.2.3 with jun’s loader, just create a new usb stick with your image and boot … Migration proposed, done, reboot … perfect ! Thanks ! Link to comment Share on other sites More sharing options...
loomes Posted September 12, 2021 Share #1340 Posted September 12, 2021 Have played around with building 920+ Loader. The good news is he is booting and redpill is loading. The Bad News is the installer dont detect any HDD's. In the serial log the Device is there, but i think the mapping needs some modifications for 920+. Testet in Promox. Link to comment Share on other sites More sharing options...
taiziccf Posted September 12, 2021 Share #1341 Posted September 12, 2021 1 hour ago, loomes said: Have played around with building 920+ Loader. The good news is he is booting and redpill is loading. The Bad News is the installer dont detect any HDD's. In the serial log the Device is there, but i think the mapping needs some modifications for 920+. Testet in Promox. Proxmox doesnt need any mapping, just make sure you have correct vid pid, the disk should be mounted as sata. Link to comment Share on other sites More sharing options...
dodo-dk Posted September 12, 2021 Share #1342 Posted September 12, 2021 Proxmox with Q35 needs mapping. With i440fx not. Link to comment Share on other sites More sharing options...
premikkoci Posted September 12, 2021 Share #1343 Posted September 12, 2021 3 hours ago, loomes said: Have played around with building 920+ Loader. The good news is he is booting and redpill is loading. The Bad News is the installer dont detect any HDD's. In the serial log the Device is there, but i think the mapping needs some modifications for 920+. Testet in Promox. Are you saying ds920+ (not 918+) loader might be possible with some additional work? Link to comment Share on other sites More sharing options...
taiziccf Posted September 12, 2021 Share #1344 Posted September 12, 2021 46 minutes ago, dodo-dk said: Proxmox with Q35 needs mapping. With i440fx not. Q35 without mapping Link to comment Share on other sites More sharing options...
loomes Posted September 12, 2021 Share #1345 Posted September 12, 2021 24 minutes ago, taiziccf said: Q35 without mapping I am talking about 920+, not 918+ or 3615. 920+ is not supportet at the Moment and im trying some things. I know that the 918+/3615xs loaders working fine in Proxmox, i have building and running them myself. Link to comment Share on other sites More sharing options...
WiteWulf Posted September 12, 2021 Share #1346 Posted September 12, 2021 What are the gains in emulating 920 over 918? Link to comment Share on other sites More sharing options...
loomes Posted September 12, 2021 Share #1347 Posted September 12, 2021 geminilake instead of apollolake Link to comment Share on other sites More sharing options...
flyride Posted September 12, 2021 Share #1348 Posted September 12, 2021 1 hour ago, loomes said: geminilake instead of apollolake Which accomplishes what? Is there any different OS support for geminilake vs apollolake? Link to comment Share on other sites More sharing options...
cferra Posted September 12, 2021 Share #1349 Posted September 12, 2021 @thorgroup pardon me for being nosy but have there been any updates? I honestly do like following along with development with your forum posts. Link to comment Share on other sites More sharing options...
pocopico Posted September 12, 2021 Share #1350 Posted September 12, 2021 14 hours ago, snowfox said: how can imodify linuxrc.syno.impl (line #285) ? just add “insmod /lib/modules/ixgbe.ko” ? i put the ixgbe.ko to /usr/lib/modules Line 285 in your case. /lib/modules is linked to /usr/lib/modules . insmod /lib/modules/xxx Link to comment Share on other sites More sharing options...
Recommended Posts