mcdull Posted September 10, 2021 Share #1276 Posted September 10, 2021 4 minutes ago, altas said: has someone a tut to create a loder under win10 ? my linux skills are a bit rusty you mean this partition to set as active, right? probably should be the fat32 one. Link to comment Share on other sites More sharing options...
shibby Posted September 10, 2021 Share #1277 Posted September 10, 2021 8 minutes ago, altas said: has someone a tut to create a loder under win10 ? my linux skills are a bit rusty you mean this partition to set as active, right? which loader do you need? Link to comment Share on other sites More sharing options...
snowfox Posted September 10, 2021 Share #1278 Posted September 10, 2021 16 hours ago, yanjun said: ixgbe.ko.gz 3.31 MB · 11 downloads ixgbevf.ko 84.3 kB · 8 downloads for 918+ 7.0.1 test fine. tks! Link to comment Share on other sites More sharing options...
altas Posted September 10, 2021 Share #1279 Posted September 10, 2021 Baremetal DSM7 for a HP GEN8 i have got one from WiteWulf but it stops somewhere Quote [ 12.592818] <redpill/override_symbol.c:308> Writing original code to <fffffff f81326de0> [ 12.595230] <redpill/override_symbol.c:308> Released lock for <ffffffff81326de0> [ 12.597539] <redpill/override_symbol.c:291> Obtaining lock for <ffffffff81326de0> [ 12.599856] <redpill/override_symbol.c:291> Writing trampoline code to <fffff fff81326de0> [ 12.602495] <redpill/override_symbol.c:291> Released lock for <ffffffff81326de0> [ 12.604837] <redpill/intercept_driver_register.c:140> Calling for DWATCH_STAT E_LIVE [ 12.607215] <redpill/virtual_uart.c:710> serial8250 driver loaded - adding queued ports [ 12.609696] <redpill/virtual_uart.c:719> Processing enqueued port 1 [ 12.611764] <redpill/virtual_uart.c:812> Registering ttyS1 (io=0x2f8) in the driver Link to comment Share on other sites More sharing options...
pocopico Posted September 10, 2021 Share #1280 Posted September 10, 2021 (edited) 27 minutes ago, altas said: Baremetal DSM7 for a HP GEN8 i have got one from WiteWulf but it stops somewhere Right after that, the system is supposed to extract the ramdisk. The issue can be that you have a big or corrupted rd.gz. I noticed that only the uncompressed image gets extracted successfully on some systems for some reason ***edit : and the reason is explained on the loader Documentation for developers : https://github.com/RedPill-TTG/redpill-load/blob/master/FOR_DEVS.md Quote compress_rd specified if ramdisk image should be compressed or should be left as a flat CPIO archive. In general, you always want the compressed one. However, some kernels have a syno-broken decompression routines and require a flat CPIO instead. To keep the consistency the ramdisk file will always be called rd.gz (regardless of the compression type or lack thereof) Edited September 10, 2021 by pocopico Link to comment Share on other sites More sharing options...
pocopico Posted September 10, 2021 Share #1281 Posted September 10, 2021 (edited) @ThorGroup @jumkey Should/could someone create a compiled module repository in GH ? This way we can offload this thread from module requests Edited September 10, 2021 by pocopico Link to comment Share on other sites More sharing options...
jumkey Posted September 10, 2021 Share #1282 Posted September 10, 2021 11 minutes ago, pocopico said: @ThorGroup @jumkey Should/could someone create a compiled module repository in GH ? This way we can offload this thread from module requests https://github.com/dogodefi/Synoextradrivers @yanjun has been created extradrivers repo 1 Link to comment Share on other sites More sharing options...
ressof Posted September 10, 2021 Share #1283 Posted September 10, 2021 1 hour ago, mcdull said: sorry, a typo, it should be active. use any partition tools or windows diskpart. Or refer to some pages before. Hi. Yes its active and I can boot from it. But the installation reach 99% and then nothing happens. Link to comment Share on other sites More sharing options...
tbc0309 Posted September 10, 2021 Share #1284 Posted September 10, 2021 7 hours ago, jumkey said: not tested make CONFIG_SYNO_LSP_RTD1619=y CONFIG_R8168=n CONFIG_R8168_PG=n CONFIG_R8125=m CROSS_COMPILE=/root/build/apollolake-DSM-7.0-toolchain/x86_64-pc-linux-gnu/bin/x86_64-pc-linux-gnu- -C /root/build/apollolake-DSM-7.0-toolkit/build/ M=`pwd` modules r8125.ko 200.34 kB · 5 downloads 918+ 7.0.1 test fine,thanks Link to comment Share on other sites More sharing options...
pocopico Posted September 10, 2021 Share #1285 Posted September 10, 2021 50 minutes ago, jumkey said: https://github.com/dogodefi/Synoextradrivers @yanjun has been created extradrivers repo Oh ! then that looks like a great opportunity for @haydibe to include the module creation on his next redpill_tool_chain release 1 Link to comment Share on other sites More sharing options...
titoum Posted September 10, 2021 Share #1286 Posted September 10, 2021 (edited) no one has tried the WOL features? it doesn't work anymore with 7.0.1 and ds finder 😕 edit: it works with another app...so may be issue with my ds finder Edited September 10, 2021 by titoum Link to comment Share on other sites More sharing options...
abesus Posted September 10, 2021 Share #1287 Posted September 10, 2021 On 9/8/2021 at 3:39 PM, s2k7 said: my DS3615xs in a docker was same with u. hangs up after adding photos to Photo app and after starting face recognition. I've resolved this issue by adding extra parameter to linux kernel (to grub command line): intel_iommu=igfx_off. In my case it was caused by some error in kernel. Link to comment Share on other sites More sharing options...
abesus Posted September 10, 2021 Share #1288 Posted September 10, 2021 Hi, I've question: Is such log normal or is something bad in my system: Quote 2021-09-09T20:00:51+02:00 DS kernel: [ 2.863870] Module [apollolake_synobios] is removed. 2021-09-09T20:00:51+02:00 DS kernel: [ 2.863943] synobios: unload 2021-09-09T20:00:51+02:00 DS kernel: [ 2.864035] <redpill/bios_shim.c:96> apollolake_synobios BIOS went away - you may get a kernel panic if YOU unloaded it Link to comment Share on other sites More sharing options...
p33ps Posted September 10, 2021 Share #1289 Posted September 10, 2021 40 minutes ago, abesus said: I've resolved this issue by adding extra parameter to linux kernel (to grub command line): intel_iommu=igfx_off. In my case it was caused by some error in kernel. Could you please be more specific about this? Link to comment Share on other sites More sharing options...
WiteWulf Posted September 10, 2021 Share #1290 Posted September 10, 2021 (edited) 5 hours ago, altas said: Baremetal DSM7 for a HP GEN8 i have got one from WiteWulf but it stops somewhere I'm not convinced it's "stopping". The last logs you see appear to be it configuring a serial port. This is very early on in the boot sequence, I think it may be switching console output to that new serial port, rather than the one you're looking at (the virtual one on your iLO). Do you have an advanced license for your iLO? Is it bringing up a NIC and DHCP'ing? Edited September 10, 2021 by WiteWulf Link to comment Share on other sites More sharing options...
stigma86 Posted September 10, 2021 Share #1291 Posted September 10, 2021 Hi everyone. I'm a satisfied user, but I was thinking of trying DMS 7. My Mobo is the Asrock J4005B-ITX + 2x4GB 2400 RAM + WD Purple 2TB HDD+ etc HW's and my System is DMS 6.2.3 (918+, Loader 1.04B loader, Pendrive) I will be using a new Pendrive and HDD because if the installation will be fail, I can restore the current system(DMS 6.2.3) I'm reading the topic, and I have some questions: - This is a developer loader: Google Drive link => this is a good link or I'm a noob😀 This is a ,,step by step codex"? - Download the loader - mount OFSmount and replace the SN (918+) PID and VID - Download the latest path file : 918+ => DSM 7.0.1 (Version: 7.0.1-42214) - I continue the installation on the web interface and install the 7.01 image, that I'm writing Link to comment Share on other sites More sharing options...
altas Posted September 10, 2021 Share #1292 Posted September 10, 2021 1 hour ago, WiteWulf said: I'm not convinced it's "stopping". The last logs you see appear to be it configuring a serial port. This is very early on in the boot sequence, I think it may be switching console output to that new serial port, rather than the one you're looking at (the virtual one on your iLO). Do you have an advanced license for your iLO? Is it bringing up a NIC and DHCP'ing? only Free License for iLO the NIC is active but no IP/DHCP Lease Link to comment Share on other sites More sharing options...
titoum Posted September 10, 2021 Share #1293 Posted September 10, 2021 16 minutes ago, stigma86 said: This is a ,,step by step codex"? - Download the loader - mount OFSmount and replace the SN (918+) PID and VID - Download the latest path file : 918+ => DSM 7.0.1 (Version: 7.0.1-42214) - I continue the installation on the web interface and install the 7.01 image, that I'm writing this is still dev so at your own risk... you need haydibe docker then building, rufus to your usb and try/error. no cookbook so far. Link to comment Share on other sites More sharing options...
vaguecupid Posted September 10, 2021 Share #1294 Posted September 10, 2021 (edited) On 9/6/2021 at 10:47 PM, Orphée said: So with telnet I did : insmod /usr/lib/modules/vmxnet3.ko systemctl restart rc-network and then I have network... Don't know what I did wrong but module is not loaded at boot. Edit : nevermind, it has to be after the "fi" line not inside... I have the same issue, how to resolve? Edited September 10, 2021 by vaguecupid Link to comment Share on other sites More sharing options...
haydibe Posted September 10, 2021 Share #1295 Posted September 10, 2021 5 hours ago, pocopico said: Oh ! then that looks like a great opportunity for @haydibe to include the module creation on his next redpill_tool_chain release Sure, lets assume I add the unmodified kernel sources, and you provide the commands required to inject those in an image created by redpill-load, it can be done. Contribute the required commands, and I bake them into the Makefile target "auto". Though if it's something where I would need to modify the redpill-load sources, then its a hard pass... Link to comment Share on other sites More sharing options...
WiteWulf Posted September 10, 2021 Share #1296 Posted September 10, 2021 52 minutes ago, altas said: only Free License for iLO the NIC is active but no IP/DHCP Lease I’m sure I asked you this already in DM, but: - are you using the internal NIC or a confirmed compatible PCIe NIC? Internal NIC doesn’t have the necessary driver included in redpill - did you edit the grub.cfg of the image to include your own SN, VID/PID and the MAC address(es) of your NIC(s)? Link to comment Share on other sites More sharing options...
D.S Posted September 10, 2021 Share #1297 Posted September 10, 2021 14 hours ago, jumkey said: not tested make CONFIG_SYNO_LSP_RTD1619=y CONFIG_R8168=n CONFIG_R8168_PG=n CONFIG_R8125=m CROSS_COMPILE=/root/build/apollolake-DSM-7.0-toolchain/x86_64-pc-linux-gnu/bin/x86_64-pc-linux-gnu- -C /root/build/apollolake-DSM-7.0-toolkit/build/ M=`pwd` modules r8125.ko 200.34 kB · 11 downloads It works. Could you help to compile the driver module for Aquantia AQtion 10G Lan for 918+ 7.0.1? Link to comment Share on other sites More sharing options...
altas Posted September 10, 2021 Share #1298 Posted September 10, 2021 (edited) 29 minutes ago, WiteWulf said: - are you using the internal NIC or a confirmed compatible PCIe NIC? Internal NIC doesn’t have the necessary driver included in redpill Yes its an PCIe NIC from Intel, its should be an INTEL E1G44ET PRO/1000 ET QUAD PORT PCI-E SERVER NIC 29 minutes ago, WiteWulf said: did you edit the grub.cfg of the image to include your own SN, VID/PID and the MAC address(es) of your NIC(s)? yes, i add my VID/PID etc. Edited September 10, 2021 by altas Link to comment Share on other sites More sharing options...
Amoureux Posted September 10, 2021 Share #1299 Posted September 10, 2021 (edited) 50 минут назад, haydibe сказал: Sure, lets assume I add the unmodified kernel sources, and you provide the commands required to inject those in an image created by redpill-load, it can be done. Contribute the required commands, and I bake them into the Makefile target "auto". Though if it's something where I would need to modify the redpill-load sources, then its a hard pass... not a good idea. I think it will be right to wait for the support of the driver injection from the redpill side Edited September 10, 2021 by Amoureux Link to comment Share on other sites More sharing options...
Hostilian Posted September 10, 2021 Share #1300 Posted September 10, 2021 On 9/4/2021 at 11:24 AM, tocinillo2 said: Compiled 7.0.1 with last BSP patch and works perfect https://drive.google.com/file/d/1CqqhO-TBdwOff0dH54iP-XPdrhzgvtNR/view?usp=sharing - Add UEFI support. - Deleted twice EFI folder. - Fixed SynoBoot_EFI place. - Compiled with last BSP Patch for 7.0.1. - Insmod efi_gop into EFI. - Tested with Baremetal and works fine (Astock 3455-ITX). - After installation (the reboot process can take 15-20 minutes) you have to install File Station manually: https://www.synology.com/en-us/support/download/DS918+#system (select DSM 7.0), find and download File Station SPK and install it in Package Center. Awesome. Same board as (one of) mine. Looks like I've got some catching up to do (as I've been taking a break). Does it run OK? Link to comment Share on other sites More sharing options...
Recommended Posts