crazych Posted November 5, 2015 #1 Posted November 5, 2015 Люди не подкажете, как обойти ограничение на создание папки синхронизации на USB диске с dropbox? У меня родная железка, просто диски в системе под завязку, а на дополнительные слотов нету. Могу только USB подцепить.
antihrist2002 Posted November 6, 2015 #2 Posted November 6, 2015 Остановить пакет. Сделать симлинк ln -s /volumeUSB1/usbshare/папка /volume1/НазваниеШары/папка запустить пакет Делать такие штуки на USB HDD не безопасно. Винт будет постоянно разгонятся и потом засыпать. Чем чаще старт/стоп тем быстрее умрет. Зависит от частоты синхронизации с дропбоксом. Если принудительно не давать засыпать диску - может перегреться.
PRIMAS4UNO Posted January 28, 2016 #3 Posted January 28, 2016 [spoiler=]Остановить пакет. Сделать симлинк ln -s /volumeUSB1/usbshare/папка /volume1/НазваниеШары/папка запустить пакет Делать такие штуки на USB HDD не безопасно. Винт будет постоянно разгонятся и потом засыпать. Чем чаще старт/стоп тем быстрее умрет. Зависит от частоты синхронизации с дропбоксом. Если принудительно не давать засыпать диску - может перегреться. По поводу USB HDD и температуры. Не в целях поспорить, а просто альтернативные иллюстрации. Я заставил себя думать что HDD это расходники. И в ожидании 3tb сложилось так, что у меня работают два usb hdd. 500 gb - трудится над торрентами около трех лет (с перерывами). 1 tb раздает видио (16 часов в день) пол года. Для сравнения системный 650 GB (раньше трудился в ноуте). В комнате температура 24C. Системный 640GB sata 190 Airflow_Temperature_Cel 30 (Min/Max 27/34) Торренты 500 GB USB 190 Airflow_Temperature_Cel 37 (Min/Max 22/40) 194 Temperature_Celsius 37 (0 22 0 0 0) Видио 1TB USB 194 Temperature_Celsius 33 В общем криминала не вижу. Хотя пуска,стоп (в отличии от нагрузке с облачной синхронизацией) они делают мало. Скорее работают постоянно под небольшой нагрузкой. PS: Не призываю всех юзать USB HDD. Мне их просто подарили и гарантия... Не уверен что на 100% правильно читаю смарт. Прикладываю выхлоп. [spoiler=]Системный Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547564A9E384 === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547564A9E384 Serial Number: XXXXXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 000cca 643dca3dc Firmware Version: JEDOA50A User Capacity: 640,135,028,736 bytes [640 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jan 28 12:38:56 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 185) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 096 062 Pre-fail Always - 0 2 Throughput_Performance 0x0025 197 100 040 Pre-fail Offline - 161 3 Spin_Up_Time 0x0023 176 100 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 7233 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 120 100 040 Pre-fail Offline - 32 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 11155 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 7201 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 502541123584 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1638431 190 Airflow_Temperature_Cel 0x0022 070 052 045 Old_age Always - 30 (Min/Max 27/34) 191 G-Sense_Error_Rate 0x0032 093 093 000 Old_age Always - 1811 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4522053 193 Load_Cycle_Count 0x0032 090 090 000 Old_age Always - 107300 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7450 - # 2 Extended offline Completed without error 00% 7426 - # 3 Extended offline Interrupted (host reset) 90% 7411 - # 4 Extended offline Completed without error 00% 7352 - # 5 Short offline Aborted by host 90% 7182 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [spoiler=]NAS:/# smartctl -a -d sat /dev/sdu1 smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.10.35] (local build) Copyright © 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Laptop Thin HDD Device Model: ST500LT012-9WS142 Serial Number: XXXXXXXXXXX LU WWN Device Id: 5 000c50 069c1b5bc Firmware Version: 0001SDM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jan 28 13:50:54 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error medium or hardware error (serious) SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 86470888 3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 95214484 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 17319 (12 41 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 121 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 38655295544 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 063 058 045 Old_age Always - 37 (Min/Max 22/40) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 37 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 350648 194 Temperature_Celsius 0x0022 037 042 000 Old_age Always - 37 (0 22 0 0 0) 196 Reallocated_Event_Count 0x000f 090 090 030 Pre-fail Always - 9417 (30335 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 090 090 000 Old_age Offline - 9417 (118 127 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 930678983 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1198758073 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 14403 - # 2 Extended offline Completed without error 00% 14399 - # 3 Short offline Completed without error 00% 2853 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [spoiler=]NAS:/# smartctl /dev/sdv1 -d sat -a smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.10.35] (local build) Copyright © 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD10JMVW-11AJGS2 Serial Number: XXXXXXXXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee 2b41694ae Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jan 28 14:49:44 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 222) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 130 128 021 Pre-fail Always - 4491 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 902 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4813 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 337 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 158 193 Load_Cycle_Count 0x0032 194 194 000 Old_age Always - 20301 194 Temperature_Celsius 0x0022 114 101 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1317 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Recommended Posts