htc2010 Posted November 3, 2015 Share #1 Posted November 3, 2015 For a standard run of OpenVPN where I only need to access small word/excel files, is there any performance difference running OpenVPN directly through my router, which has 128MB RAM and a 650MHz CPU (running DD-WRT) compared to my quad core Xpenology box with 8GB of RAM? I was told that throughput is determined by the CPU/RAM combo, but wonder what is the actual performance impact? Your thoughts? Link to comment Share on other sites More sharing options...
s2k7 Posted November 3, 2015 Share #2 Posted November 3, 2015 Which router do u use? I want one which has OPENVPN too. Link to comment Share on other sites More sharing options...
NeoID Posted November 3, 2015 Share #3 Posted November 3, 2015 I'm running a OpenVPN server on my Asus RT-AC66U router and it works perfectly. In fact, it's way better then OpenVPN on Synology as it offers more features such as choosing between TUN and TAP interfaces and more. It's really easy to setup as well. I even use Steam In-Home streaming over the Internet using that. Link to comment Share on other sites More sharing options...
Diverge Posted November 3, 2015 Share #4 Posted November 3, 2015 Netgear just added support for OpenVPN as well. Just enabled it on my R7000 router (was previously using synology DSM). Link to comment Share on other sites More sharing options...
Eduardo Posted November 5, 2015 Share #5 Posted November 5, 2015 Asus RT-AC56U here, tomato firmware. OpenVPN (two servers) running flawlessly. Linksys E3000 tomato firmware too before. OpenVPN settings quite easy on Tomato firm. OpenVPN even redirects my web traffic to internet when I use wifi outside home. http://tomato.groov.pl/ Link to comment Share on other sites More sharing options...
ivanmmj Posted November 7, 2015 Share #6 Posted November 7, 2015 I've run OpenVPN on DD-WRT, Tomato, and Merlin on the Asus RT-N16 and the Asus RT-AC66u and I've run OpenVPN on the N54L. You performance will ultimately be capped by your internet speed, so if you have a slow 1mbps upload, it won't matter what you use, you will have a 1mbps connection to your server. That being said, if your speeds are high, there WILL be a difference between the low clocked MIPS CPU's on the routers and the high clocked x86-64 CPU's on the XPEnology boxes. (People with the R7000, the Asus RT-AC56U, and all Asus devices above the RT-AC68u use a dual core ARM Cortex-A9 SoC clocked at a decently higher rate. This will likely perform somewhere in the middle.) From what I've read, the N16 at least will cap out at around 18mbps. The AC66 will do around 20MB/s. The ARM based CPU's, around 60MB/s. A decent x86 CPU can do much much more. Link to comment Share on other sites More sharing options...
Recommended Posts