XPEnology DS3612xs DSM 4.1 build 2668++ (repack v1.3a)


Recommended Posts

I'm running DS3612xs DSM 4.1 build 2668++ (more hardware) on a Pentium-D with 1gb of DDR2 and it's working great, no performance issues whatsoever.

 

However the OS becomes unresponsive from time to time, the PC doesn't shutdown but i'm unable to perform any actions such as using the web client, pinging the PC or detecting it via synology assistant. The only solution i've found when this happens is to hard shut down the PC with the power button which i really want to avoid.

 

So yeah, there it is, not sure if it's a network error (cutting the communication between the nas and router) or a software issue. I don't even know where to start to troubleshoot the issue.

 

Admin edit: Moved to viewtopic.php?f=2&t=937

Link to post
Share on other sites

Just little update (I'm very busy at work) for the next update.

 

Two "major" features are in testing stage ^^

- Add command like lspci, modinfo... If you want some please tell me (apt-* / dpkg not planned for now, maybe in future release with complete chroot of latest debian).

- Wifi drivers (I'm not a wifi expert, for now I successfully detect/load driver for atheros and realtek card but got error when I "up" the interface:

wlan0: link is not ready :sad:

 

If someone want beta build to help debugging wireless :wink:

Link to post
Share on other sites

I have a setup with a total of 12 drives. 8 drives on the LSI 9211-8i and 4 drives on motherboard.

 

With only the 8 drives on LSI connected, the initial setup doesn't even see any drives.

With only the 4 mobo SATA drives connected, I have no problem installing v1.3a and running just fine.

 

However, when I have all 12 drives connected. It would boot half way and just shutdown. I think this is similar to a problem another member posted.

 

Any chance LSI 9211-8i will be supported soon?

 

Thanks for everything so far.

Link to post
Share on other sites
I have a setup with a total of 12 drives. 8 drives on the LSI 9211-8i and 4 drives on motherboard.

 

With only the 8 drives on LSI connected, the initial setup doesn't even see any drives.

With only the 4 mobo SATA drives connected, I have no problem installing v1.3a and running just fine.

 

However, when I have all 12 drives connected. It would boot half way and just shutdown. I think this is similar to a problem another member posted.

 

Any chance LSI 9211-8i will be supported soon?

 

Thanks for everything so far.

 

LSI drivers are already included (built in the kernel, I think old drivers).

I will build latest LSI drivers (like I did for intel network card) as modules in next build.

 

Can you boot your system with livecd like ubuntu and see if all disks are detected (post dmesg, message and/or modinfo) ?

Link to post
Share on other sites

 

LSI drivers are already included (built in the kernel, I think old drivers).

I will build latest LSI drivers (like I did for intel network card) as modules in next build.

 

Can you boot your system with livecd like ubuntu and see if all disks are detected (post dmesg, message and/or modinfo) ?

 

Sure. Which version of Ubuntu LiveCD?

Link to post
Share on other sites

This version, XPEnology DS3612xs DSM 4.1 build 2668++ (repack v1.3a), is confirmed working correctly with the following motherboard:

Itox G5C100-N-G mini-itx dual on-board Marvell 88E8053 (Yukon) using an Intel C2D T7200 CPU, booting from USB and using the ICH7M on-board hard disk controller. I will also test with the RocketRaid 1740 /1742 PCI hard disk controller (based on Marvell 88SX6042).

Link to post
Share on other sites

LSI drivers are already included (built in the kernel, I think old drivers).

I will build latest LSI drivers (like I did for intel network card) as modules in next build.

 

Can you boot your system with livecd like ubuntu and see if all disks are detected (post dmesg, message and/or modinfo) ?

 

Using Ubuntu Desktop 13.04 x64 Live CD, the LSI card is detected and all drives are showing.

 

Link to post
Share on other sites

LSI drivers are already included (built in the kernel, I think old drivers).

I will build latest LSI drivers (like I did for intel network card) as modules in next build.

 

Can you boot your system with livecd like ubuntu and see if all disks are detected (post dmesg, message and/or modinfo) ?

 

Using Ubuntu Desktop 13.04 x64 Live CD, the LSI card is detected and all drives are showing.

[attachment=0]all drives showing.png[/attachment]

 

dmesg

[    4.741139] mpt2sas version 14.100.00.00 loaded
[    4.744295] ahci 0000:00:1f.2: version 3.0
[    4.744353] ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
[    4.744711] scsi0 : Fusion MPT SAS Host
[    4.753556] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (8088124 kB)
[    4.753627] mpt2sas 0000:01:00.0: irq 50 for MSI/MSI-X
[    4.753649] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 50
[    4.753651] mpt2sas0: iomem(0x00000000bfe40000), mapped(0xffffc90000c70000), size(16384)
[    4.753653] mpt2sas0: ioport(0x000000000000d000), size(256)
[    4.759325] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    4.759330] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    4.759335] ahci 0000:00:1f.2: setting latency timer to 64
[    4.799610] scsi1 : ahci
[    4.799664] scsi2 : ahci
[    4.799728] scsi3 : ahci
[    4.799777] scsi4 : ahci
[    4.799814] scsi5 : ahci
[    4.799857] scsi6 : ahci
[    4.799884] ata1: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05100 irq 49
[    4.799887] ata2: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05180 irq 49
[    4.799890] ata3: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05200 irq 49
[    4.799892] ata4: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05280 irq 49
[    4.799895] ata5: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05300 irq 49
[    4.799898] ata6: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05380 irq 49
[    4.800419] [drm] Memory usable by graphics device = 2048M
[    4.800424] i915 0000:00:02.0: setting latency timer to 64
[    4.830898] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f0
[    4.830901] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.830986] e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    4.831006] e1000e 0000:04:00.0: Disabling ASPM L0s L1
[    4.831019] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[    4.831039] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.831040] [drm] Driver supports precise vblank timestamp query.
[    4.831074] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.831173] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.831280] e1000e 0000:04:00.0: irq 52 for MSI/MSI-X
[    4.831284] e1000e 0000:04:00.0: irq 53 for MSI/MSI-X
[    4.831288] e1000e 0000:04:00.0: irq 54 for MSI/MSI-X
[    4.938741] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f1
[    4.938745] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    4.938830] e1000e 0000:04:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    4.938842] e1000e 0000:05:00.0: Disabling ASPM L0s L1
[    4.938999] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.939107] e1000e 0000:05:00.0: irq 55 for MSI/MSI-X
[    4.939112] e1000e 0000:05:00.0: irq 56 for MSI/MSI-X
[    4.939116] e1000e 0000:05:00.0: irq 57 for MSI/MSI-X
[    4.958950] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.998863] mpt2sas0: sending message unit reset !!
[    5.006848] mpt2sas0: message unit reset: SUCCESS
[    5.046495] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f2
[    5.046498] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network Connection
[    5.046582] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    5.046589] e1000e 0000:06:00.0: Disabling ASPM L0s L1
[    5.046729] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.046855] e1000e 0000:06:00.0: irq 58 for MSI/MSI-X
[    5.046860] e1000e 0000:06:00.0: irq 59 for MSI/MSI-X
[    5.046864] e1000e 0000:06:00.0: irq 60 for MSI/MSI-X
[    5.091120] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    5.091125] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.091416] hub 1-1:1.0: USB hub found
[    5.091452] hub 1-1:1.0: 6 ports detected
[    5.118646] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.118681] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.122617] ata6: SATA link down (SStatus 0 SControl 300)
[    5.122646] ata5: SATA link down (SStatus 0 SControl 300)
[    5.123611] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    5.123619] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.123648] ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    5.123651] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.126638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.128599] ata3.00: configured for UDMA/133
[    5.128632] ata4.00: configured for UDMA/133
[    5.130271] ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    5.130276] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.133751] ata1.00: configured for UDMA/133
[    5.133964] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[    5.134100] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.134102] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    5.134131] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    5.134194] sd 1:0:0:0: [sda] Write Protect is off
[    5.134197] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.134230] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.138613] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.143074] ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    5.143079] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.147050] ata2.00: configured for UDMA/133
[    5.147237] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    5.147349] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    5.147398] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.147431] sd 2:0:0:0: [sdb] Write Protect is off
[    5.147433] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.147437] scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    5.147448] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.147522] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    5.147600] scsi 4:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    5.147680] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    5.147734] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.147772] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.147780] sd 4:0:0:0: [sdd] Write Protect is off
[    5.147782] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    5.147812] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.147846] sd 3:0:0:0: [sdc] Write Protect is off
[    5.147848] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.147861] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.152107]  sda: sda1 sda2 sda3
[    5.152328] sd 1:0:0:0: [sda] Attached SCSI disk
[    5.154586] e1000e 0000:06:00.0 eth3: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f3
[    5.154589] e1000e 0000:06:00.0 eth3: Intel(R) PRO/1000 Network Connection
[    5.154674] e1000e 0000:06:00.0 eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    5.160714] mpt2sas0: Allocated physical memory: size(7418 kB)
[    5.160718] mpt2sas0: Current Controller Queue Depth(3307), Max Controller Queue Depth(3432)
[    5.160719] mpt2sas0: Scatter Gather Elements per IO(128)
[    5.163274]  sdb: sdb1 sdb2 sdb3
[    5.163556] sd 2:0:0:0: [sdb] Attached SCSI disk
[    5.167781]  sdd: sdd1 sdd2 sdd3
[    5.167965] sd 4:0:0:0: [sdd] Attached SCSI disk
[    5.173215]  sdc: sdc1 sdc2 sdc3
[    5.173507] sd 3:0:0:0: [sdc] Attached SCSI disk
[    5.195562] fbcon: inteldrmfb (fb0) is primary device
[    5.202461] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.334501] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    5.334503] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.334795] hub 2-1:1.0: USB hub found
[    5.334894] hub 2-1:1.0: 8 ports detected
[    5.382571] mpt2sas0: LSISAS2008: FWVersion(15.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00)
[    5.382575] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[    5.382693] mpt2sas0: sending port enable !!
[    5.385798] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b0054c2de0), phys(8)
[    5.398096] mpt2sas0: port enable: SUCCESS
[    5.405868] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.405873] scsi 0:0:0:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x50014ee6ab2ae67a)
[    5.405875] scsi 0:0:0:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(0)
[    5.405957] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.405960] scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.406234] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    5.413463] scsi 0:0:1:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.413467] scsi 0:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50014ee2afb8054b)
[    5.413468] scsi 0:0:1:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(3)
[    5.413601] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.413604] scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.420496] scsi 0:0:2:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.420500] scsi 0:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x50014ee2056f08ca)
[    5.420501] scsi 0:0:2:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(2)
[    5.420635] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.420638] scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.421543] Console: switching to colour frame buffer device 210x65
[    5.424991] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.424992] i915 0000:00:02.0: registered panic notifier
[    5.425007] i915: No ACPI video bus found
[    5.425031] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.428575] scsi 0:0:3:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.428586] scsi 0:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x50014ee057d83700)
[    5.428589] scsi 0:0:3:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(1)
[    5.428678] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.428683] scsi 0:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.435570] scsi 0:0:4:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.435578] scsi 0:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221104000000), phy(4), device_name(0x50014ee25ac3b0b4)
[    5.435581] scsi 0:0:4:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(7)
[    5.435674] scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.435678] scsi 0:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.443732] scsi 0:0:5:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.443738] scsi 0:0:5:0: SATA: handle(0x000e), sas_addr(0x4433221105000000), phy(5), device_name(0x50014ee057d83553)
[    5.443741] scsi 0:0:5:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(6)
[    5.443825] scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.443829] scsi 0:0:5:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.451962] scsi 0:0:6:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.451973] scsi 0:0:6:0: SATA: handle(0x000f), sas_addr(0x4433221106000000), phy(6), device_name(0x50014ee2055057a8)
[    5.451976] scsi 0:0:6:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(5)
[    5.452081] scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.452085] scsi 0:0:6:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.460384] scsi 0:0:7:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6
[    5.460392] scsi 0:0:7:0: SATA: handle(0x0010), sas_addr(0x4433221107000000), phy(7), device_name(0x50014ee600aa4694)
[    5.460395] scsi 0:0:7:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(4)
[    5.460517] scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    5.460523] scsi 0:0:7:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    5.460806] sd 0:0:0:0: Attached scsi generic sg4 type 0
[    5.460935] sd 0:0:1:0: Attached scsi generic sg5 type 0
[    5.461103] sd 0:0:2:0: Attached scsi generic sg6 type 0
[    5.461223] sd 0:0:3:0: Attached scsi generic sg7 type 0
[    5.461336] sd 0:0:4:0: Attached scsi generic sg8 type 0
[    5.461440] sd 0:0:5:0: Attached scsi generic sg9 type 0
[    5.461563] sd 0:0:6:0: Attached scsi generic sg10 type 0
[    5.461664] sd 0:0:7:0: Attached scsi generic sg11 type 0
[    5.464482] sd 0:0:2:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.464528] sd 0:0:1:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.464617] sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.464676] sd 0:0:4:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.464988] sd 0:0:3:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.465376] sd 0:0:5:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.465415] sd 0:0:6:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.465629] sd 0:0:7:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.488696] sd 0:0:4:0: [sdi] Write Protect is off
[    5.488702] sd 0:0:4:0: [sdi] Mode Sense: 7f 00 10 08
[    5.489349] sd 0:0:2:0: [sdg] Write Protect is off
[    5.489352] sd 0:0:2:0: [sdg] Mode Sense: 7f 00 10 08
[    5.489957] sd 0:0:0:0: [sde] Write Protect is off
[    5.489961] sd 0:0:0:0: [sde] Mode Sense: 7f 00 10 08
[    5.490213] sd 0:0:1:0: [sdf] Write Protect is off
[    5.490217] sd 0:0:1:0: [sdf] Mode Sense: 7f 00 10 08
[    5.490495] sd 0:0:3:0: [sdh] Write Protect is off
[    5.490498] sd 0:0:3:0: [sdh] Mode Sense: 7f 00 10 08
[    5.490991] sd 0:0:6:0: [sdk] Write Protect is off
[    5.490994] sd 0:0:6:0: [sdk] Mode Sense: 7f 00 10 08
[    5.491059] sd 0:0:5:0: [sdj] Write Protect is off
[    5.491062] sd 0:0:5:0: [sdj] Mode Sense: 7f 00 10 08
[    5.491739] sd 0:0:7:0: [sdl] Write Protect is off
[    5.491742] sd 0:0:7:0: [sdl] Mode Sense: 7f 00 10 08
[    5.495491] sd 0:0:4:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.496207] sd 0:0:2:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.497376] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.497545] sd 0:0:1:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.498837] sd 0:0:3:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.499173] sd 0:0:6:0: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.499432] sd 0:0:5:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.500138] sd 0:0:7:0: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    5.506698] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=1006
[    5.506702] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.506704] usb 1-1.1: Product: Keyboard Hub
[    5.506707] usb 1-1.1: Manufacturer: Apple, Inc.
[    5.506709] usb 1-1.1: SerialNumber: 000000000000
[    5.506980] hub 1-1.1:1.0: USB hub found
[    5.507044] hub 1-1.1:1.0: 3 ports detected
[    5.530780]  sdi: sdi1 sdi2 sdi3 < sdi5 >
[    5.531324]  sdg:
[    5.534834]  sde:
[    5.535095]  sdf:
[    5.537429]  sdh:
[    5.537530]  sdk:
[    5.537943]  sdj:
[    5.538405]  sdl:
[    5.566234] sd 0:0:2:0: [sdg] Attached SCSI disk
[    5.566538] sd 0:0:4:0: [sdi] Attached SCSI disk
[    5.571241] sd 0:0:0:0: [sde] Attached SCSI disk
[    5.571561] sd 0:0:1:0: [sdf] Attached SCSI disk
[    5.575067] sd 0:0:3:0: [sdh] Attached SCSI disk
[    5.576302] sd 0:0:6:0: [sdk] Attached SCSI disk
[    5.576679] sd 0:0:5:0: [sdj] Attached SCSI disk
[    5.577120] sd 0:0:7:0: [sdl] Attached SCSI disk
[    5.577756] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[    5.577760] Switching to clocksource tsc
[    5.605874] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[    5.698683] usb 2-1.4: New USB device found, idVendor=125f, idProduct=312b
[    5.698689] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.698692] usb 2-1.4: Product: ADATA USB Flash Drive
[    5.698694] usb 2-1.4: Manufacturer: ADATA
[    5.698697] usb 2-1.4: SerialNumber: 233071105004006B

 

 

lsmod

Module                  Size  Used by
dm_crypt               22820  0 
snd_hda_codec_hdmi     36913  1 
snd_hda_intel          39619  4 
snd_hda_codec         136453  2 snd_hda_codec_hdmi,snd_hda_intel
joydev                 17377  0 
coretemp               13355  0 
snd_hwdep              13602  1 snd_hda_codec
kvm_intel             132891  0 
snd_pcm                97451  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
kvm                   443165  1 kvm_intel
psmouse                95870  0 
mac_hid                13205  0 
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0 
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30180  1 snd_seq_midi
snd_seq                61554  2 snd_seq_midi_event,snd_seq_midi
ghash_clmulni_intel    13259  0 
cryptd                 20373  1 ghash_clmulni_intel
gpio_ich               13476  0 
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29425  2 snd_pcm,snd_seq
serio_raw              13215  0 
dm_multipath           22843  0 
snd                    68876  17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
lpc_ich                17061  0 
scsi_dh                14843  1 dm_multipath
mei                    41158  0 
parport_pc             28152  0 
bnep                   18036  2 
soundcore              12680  1 snd
rfcomm                 42641  0 
ppdev                  17073  0 
microcode              22881  0 
bluetooth             228619  10 bnep,rfcomm
lp                     17759  0 
parport                46345  3 lp,ppdev,parport_pc
squashfs               36522  1 
overlayfs              28003  1 
nls_utf8               12557  1 
isofs                  39815  1 
dm_raid45              76725  0 
xor                    17116  1 dm_raid45
dm_mirror              21946  0 
dm_region_hash         20820  1 dm_mirror
dm_log                 18529  3 dm_region_hash,dm_mirror,dm_raid45
hid_logitech_dj        18604  0 
hid_apple              13237  0 
usbhid                 47074  1 hid_logitech_dj
hid                   101002  3 usbhid,hid_logitech_dj,hid_apple
usb_storage            57204  1 
i915                  600351  3 
video                  19390  1 i915
ahci                   25731  4 
libahci                31364  1 ahci
i2c_algo_bit           13413  1 i915
mpt2sas               155423  1 
drm_kms_helper         49394  1 i915
drm                   286313  4 i915,drm_kms_helper
e1000e                198787  0 
raid_class             13525  1 mpt2sas
scsi_transport_sas     40901  1 mpt2sas

 

modinfo mpt2sas

ubuntu@ubuntu:~$ modinfo mpt2sas
filename:       /lib/modules/3.8.0-19-generic/kernel/drivers/scsi/mpt2sas/mpt2sas.ko
version:        14.100.00.00
license:        GPL
description:    LSI MPT Fusion SAS 2.0 Device Driver
author:         LSI Corporation 
srcversion:     0CDAC54AA3FB6BD11682E57
alias:          pci:v00001000d0000007Esv*sd*bc*sc*i*
alias:          pci:v00001000d0000006Esv*sd*bc*sc*i*
alias:          pci:v00001000d00000087sv*sd*bc*sc*i*
alias:          pci:v00001000d00000086sv*sd*bc*sc*i*
alias:          pci:v00001000d00000085sv*sd*bc*sc*i*
alias:          pci:v00001000d00000084sv*sd*bc*sc*i*
alias:          pci:v00001000d00000083sv*sd*bc*sc*i*
alias:          pci:v00001000d00000082sv*sd*bc*sc*i*
alias:          pci:v00001000d00000081sv*sd*bc*sc*i*
alias:          pci:v00001000d00000080sv*sd*bc*sc*i*
alias:          pci:v00001000d00000065sv*sd*bc*sc*i*
alias:          pci:v00001000d00000064sv*sd*bc*sc*i*
alias:          pci:v00001000d00000077sv*sd*bc*sc*i*
alias:          pci:v00001000d00000076sv*sd*bc*sc*i*
alias:          pci:v00001000d00000074sv*sd*bc*sc*i*
alias:          pci:v00001000d00000072sv*sd*bc*sc*i*
alias:          pci:v00001000d00000070sv*sd*bc*sc*i*
depends:        scsi_transport_sas,raid_class
intree:         Y
vermagic:       3.8.0-19-generic SMP mod_unload modversions 
parm:           logging_level: bits for enabling additional logging info (default=0)
parm:           max_sectors:max sectors, range 64 to 32767  default=32767 (ushort)
parm:           max_lun: max lun, default=16895  (int)
parm:           diag_buffer_enable: post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0) (int)
parm:           prot_mask: host protection capabilities mask, def=7  (int)
parm:           max_queue_depth: max controller queue depth  (int)
parm:           max_sgl_entries: max sg entries  (int)
parm:           msix_disable: disable msix routed interrupts (default=0) (int)
parm:           missing_delay: device missing delay , io missing delay (array of int)
parm:           mpt2sas_fwfault_debug: enable detection of firmware fault and halt firmware - (default=0)
parm:           disable_discovery: disable discovery  (int)

 

Try with this : http://xpenology.trantor.be/mpt2sas-v16.7z

Replace zImage on your usb stick with this one and put mpt2sas.ko (latest from LSI website) in /lib/modules/.

Reboot and test. (maybe you will need to insmod the module)

 

Waiting your feedback :wink:

 

Just little update (I'm very busy at work) for the next update.

 

Two "major" features are in testing stage ^^

Please Trantor, add also support for LVM mirror. See: viewtopic.php?f=2&t=915#p4291

You only need to add this three modules: dm-mirror.ko, dm-region-hash.ko and dm-log.ko

 

:wink:

 

I will include these :wink:

Link to post
Share on other sites
Try with this : http://xpenology.trantor.be/mpt2sas-v16.7z

Replace zImage on your usb stick with this one and put mpt2sas.ko (latest from LSI website) in /lib/modules/.

Reboot and test. (maybe you will need to insmod the module)

 

Waiting your feedback :wink:

 

Trantor. Awesome work.

 

Here's what I've noticed. the new zImage alone doesn't see the LSI drives for initital setup. After installation with onboard SATA drives and insmod /lib/modules/mpt2sas.ko, I'm able to see all 12 drives. Is there an more automated way for the system to automatically load the driver upon bootup?

 

Thanks.

Link to post
Share on other sites
However, I discovered a new issue. Everytime I do "insmod /lib/modules/mpt2sas.ko", I would get some show up as Disks and some show up as eSATA with 0 GB. This changes everytime I restart and do the insmod.

 

Okay, I guess I fixed this problem by modifying /etc.defaults/synoinfo.

 

changed

internalportcfg="0xfff"

to

internalportcfg="0xfffff"

 

This change in mask gave me more internal ports.

 

changed

esataportcfg="0xff0000"

to

esataportcfg="0x00000"

 

This change in mask because I don't have any eSATA ports.

 

 

I was also able to make the module load on boot up by adding "mpt2sas" to KERNEL_MODULES in /etc/rc. Is this the correct way to do it?

 

 

Link to post
Share on other sites

I pleased to help :smile:

 

Yes this fix will of course included in v1.4.

Modifying /etc/rc is a way to autoload module, I will update the ramdrive to load the mpt2sas module at boot.

 

Your fix in /etc.defaults/synoinfo is very great :grin:

 

I'm waiting synology to release proper sources to compil and repack the 4.2 and/or maybe 4.3 (beta).....

Link to post
Share on other sites
I pleased to help :smile:

 

Yes this fix will of course included in v1.4.

Modifying /etc/rc is a way to autoload module, I will update the ramdrive to load the mpt2sas module at boot.

 

Your fix in /etc.defaults/synoinfo is very great :grin:

 

I'm waiting synology to release proper sources to compil and repack the 4.2 and/or maybe 4.3 (beta).....

 

I see 4.2 Toolchain in here

http://sourceforge.net/projects/dsgpl/files/

 

What's all needed? I'm interested in building my own as well.

Link to post
Share on other sites
I pleased to help :smile:

 

Yes this fix will of course included in v1.4.

Modifying /etc/rc is a way to autoload module, I will update the ramdrive to load the mpt2sas module at boot.

 

Your fix in /etc.defaults/synoinfo is very great :grin:

 

I'm waiting synology to release proper sources to compil and repack the 4.2 and/or maybe 4.3 (beta).....

 

I see 4.2 Toolchain in here

http://sourceforge.net/projects/dsgpl/files/

 

What's all needed? I'm interested in building my own as well.

 

As I already tell, we need x86_64 v3.2.30 4.2 Tool Chain to build DSM 4.2 from scratch (atm only Intel x86 Linux 3.2.30 (Evansport : atom 32bits platform) is available for x86 arch)

 

Hello! Just tried it and it works great atm, have to test a little longer, however. Will 1.4 be build 4.2?

 

No 1.4 will still be 4.1, but maybe the last of 4.1 branch...(if synology release what we need)

Link to post
Share on other sites
I pleased to help :smile:

 

Yes this fix will of course included in v1.4.

Modifying /etc/rc is a way to autoload module, I will update the ramdrive to load the mpt2sas module at boot.

 

Your fix in /etc.defaults/synoinfo is very great :grin:

 

I'm waiting synology to release proper sources to compil and repack the 4.2 and/or maybe 4.3 (beta).....

 

I see 4.2 Toolchain in here

http://sourceforge.net/projects/dsgpl/files/

 

What's all needed? I'm interested in building my own as well.

 

As I already tell, we need x86_64 v3.2.30 4.2 Tool Chain to build DSM 4.2 from scratch (atm only Intel x86 Linux 3.2.30 (Evansport : atom 32bits platform) is available for x86 arch)

 

Hello! Just tried it and it works great atm, have to test a little longer, however. Will 1.4 be build 4.2?

 

No 1.4 will still be 4.1, but maybe the last of 4.1 branch...(if synology release what we need)

 

 

Thanks :smile: Im confused about the 4.2 build in the general forum then. Whats the differencE? Thanks

Link to post
Share on other sites
I pleased to help :smile:

 

Yes this fix will of course included in v1.4.

Modifying /etc/rc is a way to autoload module, I will update the ramdrive to load the mpt2sas module at boot.

 

Your fix in /etc.defaults/synoinfo is very great :grin:

 

I'm waiting synology to release proper sources to compil and repack the 4.2 and/or maybe 4.3 (beta).....

 

I see 4.2 Toolchain in here

http://sourceforge.net/projects/dsgpl/files/

 

What's all needed? I'm interested in building my own as well.

 

As I already tell, we need x86_64 v3.2.30 4.2 Tool Chain to build DSM 4.2 from scratch (atm only Intel x86 Linux 3.2.30 (Evansport : atom 32bits platform) is available for x86 arch)

 

Hello! Just tried it and it works great atm, have to test a little longer, however. Will 1.4 be build 4.2?

 

No 1.4 will still be 4.1, but maybe the last of 4.1 branch...(if synology release what we need)

 

Trantor: Thank you for your excellent work! :grin:

Can you point to somewhere it is explained, if anywhere, why Tool Chains for Bromolow (or Pineview, both being x86_64) 3.2.11 won't work? Is it the architecture or the kernel revision that is the problem?

Evansport (AKA Berryville?!?) is apparently for the new Synology "x14+"-series featuring the Intel CE5300-series CPU, which does not do 64-bit code, but only x86.

I am, and possible others too are a bit confused because, if the released Tool Chain for Intel x86 Linux 3.2.11 (Bromolow) doesn't work correctly with the released 4.2 cource code, then how have the various 4.2-versions versions available via this site been compiled? Is there a discussion thread on this site, or somewhere else, where these matters are laid out?

 

edit: +1 for the AFP update to fix performance issues.

Link to post
Share on other sites

colombodk and pmcnano you point in the good direction and so I double check what's blocking us to compil full custom DSM 4.2.

 

Existing 4.2 build on the forum use original kernel from syno + cross compiled modules (network, usb....) to support additional hardware.

My last tries to compil 4.2 (3.2.30) kernel (with gpl sources from syno), result in a machine shutdowning/restarting itself :sad:

 

Today I restart from the begenning my test on compiling custom DSM 4.2:

- Clean install of debian 7 (compiling / building lab)

- Using gcc420_glibc236_x64_bromolow-GPL tool chain (Intel x86 Linux 3.2.11 (Bromolow) ; yes I know I said this will result in corrupt compilation...but wait & see)

- Kernel from syno GPL (synogpl-3201-bromolow) + fix to few .c files (from andy's git and nighthawk)

- Use odie's build (DSM 4.2 build 3202) as base

 

DSM 4.1 and 4.2 use both gcc 4.20 and glibc 2.36. (I think this is why using 3.2.11 tool chain instead of missing 3.2.30 is working)

 

Few hours later (and lot of cofee ^^), I finally succeeded to boot with my brand new 4.2 kernel :grin::grin:

 

First 4.2 beta very soon :wink:

Link to post
Share on other sites

Excellent news Trantor. I can't wait for the 4.2 release. The current v1.3a + modified zImage + mpt2sas.ko works for my hardware using LSI card, but performance is quite bad. 4.2 will surely fix the problem. I'll be happy to it out once your release is available.

 

Keep up the awesome work.

 

On a side note, it would be awesome if you could write up the instruction how your workflow to build 4.2, so others like myself can tweak it and offer better support for you.

 

Thanks.

Link to post
Share on other sites
Excellent news Trantor. I can't wait for the 4.2 release. The current v1.3a + modified zImage + mpt2sas.ko works for my hardware using LSI card, but performance is quite bad. 4.2 will surely fix the problem. I'll be happy to it out once your release is available.

 

Keep up the awesome work.

 

On a side note, it would be awesome if you could write up the instruction how your workflow to build 4.2, so others like myself can tweak it and offer better support for you.

 

Thanks.

 

Yes 4.2 have AFP fixes :

AFP (Apple File Protocol) Performance Enhancements -- The speed of file transfers to the DiskStation has improved up to 52%

Link to post
Share on other sites

I think I have found a bug?

 

Let me explain......

 

I set up volume 1 SHR with 4 disks (I am using a Tranquil SQA5H, so I have 5 disk bays) and loaded data onto it. I then (some time later) added a new disk into the 5th drive bay. There does not seem to be any way for me to manage this volume and allow me to add the 5th disk to it. Yes, I can set the 5th disk as volume 2, but cannot get it to join volume 1.

 

I have a real DS 412+ and this Tranquil box. On the real one yuo can click on the "manage" volume. On the Tranquil, the "manage" box is not clickable.

 

Anyone got any ideas?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.