Jump to content
XPEnology Community

XPEnology DS3612xs DSM 4.1 build 2668++ (repack v1.3a)


Recommended Posts

This version is a rebuild base of andy's release (4.1++)

 

What's new ?

- Add / update Network / SATA / SCSI / SAS / USB drivers

- Fix lot of USB issues

- Add PATA support

- SSH access enabled by default

- Add experimental support for acpi / powermanagement

- Temporary fix for LSI HBA (mpt2sas)

 

To convert .img file to .vdi (virtualbox)

 

20-07-2013

Version 1.3a is now available : http://xpenology.trantor.be/4.1.php

 

As usual give feedbacks :smile:

 

 

See changelog for full list of fix and supported hardware:

 

CHANGELOG

v1.3a (20-07-2013)

Fix PackageCenter not working with some hardware/system (include patched libcrypto by andy   )


v1.3 (17-07-2013)


Fix almost all insmod errors (crypto stack is now build as module)
Add PATA drivers (see below)
Add Network drivers (see below)
SSH access enabled by default
(EXPERIMENTAL) Build some modules for powermanagement/acpi (manually load it on supported hardware)


PATA
----

ATI PATA (PATA_ATIIXP)
AMD/NVidia PATA (PATA_AMD)
CMD64x PATA (PATA_CMD64X)
JMicron PATA (PATA_JMICRON)
Marvell PATA (PATA_MARVELL)
Promise PATA 2027x (PATA_PDC2027X)
Intel SCH PATA (PATA_SCH) 
CMD / Silicon Image 680 PATA (PATA_SIL680)  
SiS PATA (PATA_SIS) 
VIA PATA (PATA_VIA) 
Winbond SL82C105 PATA (PATA_WINBOND) 


NET
---

Atheros L1C (ATL1E)
Atheros L1E (ATL1E)
AMD 8111 (AMD8111_ETH)
D-LINK DL2000/TC902x-based Gigabit Ethernet (DL2K) 


ACPI
----

Fan (as module fan.ko)
AMD Opteron/Athlon64 PowerNow! (as module powernow-k8.ko)


HARDWARE MONITORING
-------------------

AMD Athlon64/FX or Opteron temperature sensor (SENSORS_K8TEMP)
AMD Family 10h+ temperature sensor (SENSORS_K10TEMP) 
AMD Family 15h processor power (SENSORS_FAM15H_POWER)  
ASUS ATK0110 (as module asus_atk0110.ko)

Synology Hard Disk Monitor (SENSORS_SYNO_HDDMON)
 ¦ If you say yes here you get support for the Synology 
 ¦ Hdd Monitor to monitor the hdds' presentation and to
 ¦ enable/disable the power supply of each hdd.


v1.2 (07-07-2013)

Reduce the size by about 100 MB of the repack (use synoboot image from odie's repack)
Fix USB modules not comiled correctly:
- Fix automount of USB external disk in DSM
- Fix shutdown/restart issue (USB devices was previously detected as internal sata disk)
- Fix USB stick was formated during install (no more GRUB error when install !!)

SCSI
LSI Logic MegaRAID SAS RAID


v1.1

The .config file is included in kernel

NETWORK
Replace the REALTEK r8169 driver with the r8168 v8.036 (RTL8111x/RTL8168x/RTL8411x)
Add REALTEK driver r8101 v1.024.00 (RTL8100x/RTL8101x/RTL8102x/RTL8103x/RTL8401x/RTL8105x/RTL8106x)
Update INTEL e1000e driver to v2.4.14 (support I217x and I218x chip)

USB
USB_OHCI_HCD (thanks totalnas for the tip)

SATA
VIA SATA support (SATA_VIA)

SCSI
3ware 5/6/7/8xxx ATA-RAID
3ware 9xxx SATA-RAID
3ware 97xx SAS/SATA-RAID
HP Smart Array SCSI
Adaptec AIC7xxx (New Driver)
Adaptec AIC79xx U320
Adaptec AIC94xx SAS/SATA
Marvell 88SE64XX/88SE94XX SAS/SATA
LSI Logic New Generation RAID Device (MEGARAID_NEWGEN)
HighPoint RocketRAID 3xxx/4xxx Controller
IBM ServeRAID
Intel(R) C600 Series Chipset SAS 
Qlogic QLA 1240/1x80/1x160 SCSI
QLogic ISP4XXX and ISP82XX


v1.0

Base on http://xpenology.com/forum/viewtopic.php?f=2&t=41

Add these driver
NETWORK
Marvell Yukon 2 (sky2) : 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
JMicron JMC250 (jme)
VIA Rhine (via-rhine) : (Rhine-I (VT86C100A), Rhine-II (VT6102), or Rhine-III (VT6105)

SCSI
VMware PVSCSI driver

Edited by Guest
Link to comment
Share on other sites

Good work!The sd card can be showed correctly!

 

But my RT5372L wireless card still failed,show "Invalid RT chipset detected"

 

thank yo so much!

 

No wireless support is "yet" included in this build, but I can update it and include wireless drivers.

If someone want specific driver please let me know :smile:

Link to comment
Share on other sites

first, very nice and good work.

 

I have a problem with my 3Ware 9650SE-8LPML. I Install the system without the controller and the system works. When I install the controller (with and without HDD) the system boot's up and when it is finish it's make a Shutdown. When you need the logfiles pleas tell me. Sorry for my bad English.

Link to comment
Share on other sites

first, very nice and good work.

 

I have a problem with my 3Ware 9650SE-8LPML. I Install the system without the controller and the system works. When I install the controller (with and without HDD) the system boot's up and when it is finish it's make a Shutdown. When you need the logfiles pleas tell me. Sorry for my bad English.

 

Yes if you please give me logs files.

Test with ubuntu livecd if your controller is detected and look what module and version is loaded.

 

I have one TP-Link TL-WDN4800 N900 WLAN-N Dualband-Adapter in my Hackintosh (Atheros AR9380 chipset, Ath9k).

 

If somebody want to know, I can check it in Ubuntu - to see driver status in ubuntu ???

 

I will include wireless support in my next update (atheros, realtek, intel, ralink...)

Link to comment
Share on other sites

Good work!The sd card can be showed correctly!

 

But my RT5372L wireless card still failed,show "Invalid RT chipset detected"

 

thank yo so much!

 

No wireless support is "yet" included in this build, but I can update it and include wireless drivers.

If someone want specific driver please let me know :smile:

 

Thank you,Trantor.The easiest way to support wireless is to use latest compat-drivers(http://wireless.kernel.org).

 

I have tried sometimes,not work,but with odie's DSM 4.2,it runs.May be the kernel of 4.1 has some errors preventing compiling.(link the post: viewtopic.php?f=2&t=947)

 

I use the DSM for hotspot,4.1's hotspot is stronger than 4.2's(4.2's will crush unexpectly),I'm seeing for the next build.

 

 

BTW,i hope the support for Ralink RT5372L,it can be run by the latest RT2x00 Driver(included in compat-drivers),or the offical driver which needs firmware(http://www.mediatek.com/_en/07_download ... php?sn=501)

 

Thank you again,Trantor!

Link to comment
Share on other sites

this is from /var/log/messages

 

insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/aesni-intel.ko': No such device
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
insmod: can't insert '/lib/modules/synobios.ko': File exists
Jul  9 20:33:38 syslogd started: BusyBox v1.16.1
Jul  9 20:33:38 kernel: [    4.333050] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
Jul  9 20:33:38 kernel: [    4.339616] md: sdb2 has different UUID to sdb1
Jul  9 20:33:38 kernel: [    4.650389] r8168  Copyright (C) 2013  Realtek NIC software team 
Jul  9 20:33:38 kernel: [    4.650392]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
Jul  9 20:33:38 kernel: [    4.650394]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
Jul  9 20:33:38 kernel: [    4.654469] bromolow_synobios: module license 'Synology Inc.' taints kernel.
Jul  9 20:33:38 kernel: [    4.654638] Disabling lock debugging due to kernel taint
Jul  9 20:33:38 kernel: [    4.657400] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
Jul  9 20:33:38 kernel: [    4.657713] IP: [] syno_libata_index_get_by_map+0x36/0x83
Jul  9 20:33:38 kernel: [    4.657907] PGD 6dfc2067 PUD 6dfc3067 PMD 0 
Jul  9 20:33:38 kernel: [    4.658011] Oops: 0000 [#1] SMP 
Jul  9 20:33:38 kernel: [    4.658011] CPU 1 
Jul  9 20:33:38 kernel: [    4.658011] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
Jul  9 20:33:38 kernel: [    4.658011] 
Jul  9 20:33:38 kernel: [    4.658011] Pid: 1261, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
Jul  9 20:33:38 kernel: [    4.658011] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
Jul  9 20:33:38 kernel: [    4.658011] RSP: 0018:ffff88006b1f3d48  EFLAGS: 00010286
Jul  9 20:33:38 kernel: [    4.658011] RAX: 0000000000000000 RBX: ffff88006b1f3d58 RCX: 0000000000000000
Jul  9 20:33:38 kernel: [    4.658011] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006b1f3d58
Jul  9 20:33:38 kernel: [    4.658011] RBP: ffff88006df94000 R08: ffffffff81921c60 R09: 0000000000000000
Jul  9 20:33:38 kernel: [    4.658011] R10: ffff88006b3bd400 R11: 0000000000000016 R12: 0000000000000000
Jul  9 20:33:38 kernel: [    4.658011] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
Jul  9 20:33:38 kernel: [    4.658011] FS:  0000000000000000(0000) GS:ffff88006e500000(0000) knlGS:0000000000000000
Jul  9 20:33:38 kernel: [    4.658011] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jul  9 20:33:38 kernel: [    4.658011] CR2: 0000000000000068 CR3: 000000006dfc5000 CR4: 00000000000006e0
Jul  9 20:33:38 kernel: [    4.658011] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul  9 20:33:38 kernel: [    4.658011] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul  9 20:33:38 kernel: [    4.658011] Process insmod (pid: 1261, threadinfo ffff88006b1f2000, task ffff88006dd6d8d0)
Jul  9 20:33:38 kernel: [    4.658011] Stack:
Jul  9 20:33:38 kernel: [    4.658011]  ffff88006df94000 ffffffff812077f8 0000000000000000 ffffffffa009f720
Jul  9 20:33:38 kernel: [    4.658011]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
Jul  9 20:33:38 kernel: [    4.658011]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
Jul  9 20:33:38 kernel: [    4.658011] Call Trace:
Jul  9 20:33:38 kernel: [    4.658011]  [] ? scsi_host_lookup+0x46/0x4e
Jul  9 20:33:38 kernel: [    4.658011]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
Jul  9 20:33:38 kernel: [    4.658011]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
Jul  9 20:33:38 kernel: [    4.658011]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
Jul  9 20:33:38 kernel: [    4.658011]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
Jul  9 20:33:38 kernel: [    4.658011]  [] ? do_one_initcall+0x79/0x127
Jul  9 20:33:38 kernel: [    4.658011]  [] ? sys_init_module+0x104a/0x11ef
Jul  9 20:33:38 kernel: [    4.658011]  [] ? fput+0x175/0x196
Jul  9 20:33:38 kernel: [    4.658011]  [] ? filp_close+0x64/0x6c
Jul  9 20:33:38 kernel: [    4.658011]  [] ? system_call_fastpath+0x16/0x1b
Jul  9 20:33:38 kernel: [    4.658011] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
Jul  9 20:33:38 kernel: [    4.658011] RIP  [] syno_libata_index_get_by_map+0x36/0x83
Jul  9 20:33:38 kernel: [    4.658011]  RSP 
Jul  9 20:33:38 kernel: [    4.658011] CR2: 0000000000000068
Jul  9 20:33:38 kernel: [    4.667863] ---[ end trace 030b2babde2bad05 ]---
Jul  9 20:33:38 kernel: [    5.035737] synoacl module [synoacl_ext4] is not loaded 
Jul  9 20:33:38 kernel: [    5.035894] synoacl module [synoacl_vfs] is not loaded 
Jul  9 20:33:38 kernel: [    5.050855] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
Jul  9 20:33:38 kernel: [    6.031940] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0)
Jul  9 20:33:38 kernel: [    6.059218] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel)
Jul  9 20:33:38 kernel: [    6.090192] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel)
Jul  9 20:33:38 kernel: [    6.099857] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel)
Jul  9 20:33:38 kernel: [    6.108350] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel)
Jul  9 20:33:38 kernel: [    6.119593] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel)
Jul  9 20:33:38 kernel: [    6.128848] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel)
Jul  9 20:33:38 kernel: [    6.137328] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel)
Jul  9 20:33:38 kernel: [    6.147644] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel)
Jul  9 20:33:38 kernel: [    6.156518] cryptomgr: exports duplicate symbol alg_test (owned by kernel)
Jul  9 20:33:38 kernel: [    6.174877] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel)
Jul  9 20:33:38 kernel: [    6.183334] rng: exports duplicate symbol crypto_default_rng (owned by kernel)
Jul  9 20:33:38 kernel: [    6.233225] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel)
Jul  9 20:33:38 kernel: [    6.248590] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel)
Jul  9 20:33:38 kernel: [    6.278112] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel)
Jul  9 20:33:38 kernel: [    6.334233] libcrc32c: exports duplicate symbol crc32c (owned by kernel)
Jul  9 20:33:38 kernel: [    6.345291] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel)
Jul  9 20:33:38 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul  9 20:33:38 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: scemd.c:127 open /dev/synobios error!
Jul  9 20:33:43 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used.
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul  9 20:33:43 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul  9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul  9 20:33:43 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set
Jul  9 20:33:43 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul  9 20:33:43 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul  9 20:33:43 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul  9 20:33:43 scemd: external_microp_id_check.c:44 Fail to open synobios
platform error
Jul  9 20:33:43 scemd: write to uart2 error, error=(5)Input/output error
Jul  9 20:33:43 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory
Jul  9 20:33:44 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd
Jul  9 20:33:44 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul  9 20:33:44 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul  9 20:33:44 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Jul  9 20:33:44 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul  9 20:33:44 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul  9 20:33:44 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd
Jul  9 20:33:44 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul  9 20:33:44 synousbdisk: RCClean succeeded
Jul  9 20:33:44 synosata: synosata.c:152 no external sata devices granted
Jul  9 20:33:45 synoexternal: write to uart2 error, error=(5)Input/output error
killall: synolunbkp: no process killed
Jul  9 20:33:46 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul  9 20:33:47 synoexternal: write to uart2 error, error=(5)Input/output error
Jul  9 20:33:47 kernel: [   15.836246] sd 7:0:0:0: [sdu] No Caching mode page present
Jul  9 20:33:47 kernel: [   15.836368] sd 7:0:0:0: [sdu] Assuming drive cache: write through
Jul  9 20:33:47 kernel: [   15.847865] sd 7:0:0:0: [sdu] No Caching mode page present
Jul  9 20:33:47 kernel: [   15.848055] sd 7:0:0:0: [sdu] Assuming drive cache: write through
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb1
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul  9 20:33:47 hotplugd: DEVPATH:1-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:13.2
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb2
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:13.2
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/001
Jul  9 20:33:47 hotplugd: DEVPATH:2-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:00:16.2
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/003/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb3
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:00:16.2
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/003/001
Jul  9 20:33:47 hotplugd: DEVPATH:3-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0001:0000:00:12.0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/004/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb4
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0001:0000:00:12.0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/004/001
Jul  9 20:33:47 hotplugd: DEVPATH:4-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:13.0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/005/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb5
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:13.0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/005/001
Jul  9 20:33:47 hotplugd: DEVPATH:5-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:14.5
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/006/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb6
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:14.5
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/006/001
Jul  9 20:33:47 hotplugd: DEVPATH:6-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:16.0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/007/001
Jul  9 20:33:47 hotplugd: DEVPATH:usb7
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7
Jul  9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )
Jul  9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:16.0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/007/001
Jul  9 20:33:47 hotplugd: DEVPATH:7-0:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:9/0/0
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/002
Jul  9 20:33:47 hotplugd: DEVPATH:2-4
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Jul  9 20:33:47 hotplugd: ##### ACTION:add
Jul  9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/002
Jul  9 20:33:47 hotplugd: DEVPATH:2-4:1.0
Jul  9 20:33:47 hotplugd: SUBSYSTEM:usb
Jul  9 20:33:47 hotplugd: INTERFACE:8/6/80
Jul  9 20:33:47 kernel: [   16.234838] sd 7:0:0:0: [sdu] No Caching mode page present
Jul  9 20:33:47 kernel: [   16.234966] sd 7:0:0:0: [sdu] Assuming drive cache: write through
Jul  9 20:33:48 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab
Jul  9 20:33:49 hotplugd: ##### ACTION:add
Jul  9 20:33:49 hotplugd: DEVNAME:sdu
Jul  9 20:33:49 hotplugd: DEVICE:/proc/bus/usb/002/002
Jul  9 20:33:49 hotplugd: DEVGUID:1172FD860
Jul  9 20:33:49 hotplugd: DEVPATH:sdu
Jul  9 20:33:49 hotplugd: SUBSYSTEM:block
Jul  9 20:33:49 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/host7/target7:0:0/7:0:0:0
Jul  9 20:33:49 hotplugd: hotplugd.c:835 ##### complete device hotplug!!
Jul  9 20:33:49 hotplugd: hotplugd.c:506 fail to parse the line. [ ]
Jul  9 20:33:49 hotplugd: hotplugd.c (1434) ==== USB disk [sdu] plugged in ====
Jul  9 20:33:49 hotplugd: hotplugd.c:1435 goto USB disk, szDeviceName=sdu
Jul  9 20:33:49 avahi-daemon[6841]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record
Jul  9 20:33:49 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Jul  9 20:33:51 syslogd exiting

 

With Ubuntu Live cd

 

dmesg

[   10.295649] scsi1 : ahci
[   10.296831] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[
[   10.525625] scsi3 : 3ware 9000 Storage Controller
[   10.525760] 3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.

[   10.861237] 3w-9xxx: scsi3: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.

module info

ubuntu@ubuntu:~$ modinfo 3w-9xxx
filename:       /lib/modules/3.8.0-19-generic/kernel/drivers/scsi/3w-9xxx.ko
version:        2.26.02.014
license:        GPL
description:    3ware 9000 Storage Controller Linux Driver
author:         LSI
srcversion:     1BFC66DD68F5C3315E37B66
alias:          pci:v000013C1d00001005sv*sd*bc*sc*i*
alias:          pci:v000013C1d00001004sv*sd*bc*sc*i*
alias:          pci:v000013C1d00001003sv*sd*bc*sc*i*
alias:          pci:v000013C1d00001002sv*sd*bc*sc*i*
depends:        
intree:         Y
vermagic:       3.8.0-19-generic SMP mod_unload modversions 
parm:           use_msi:Use Message Signaled Interrupts.  Default: 0 (int)

 

i hope this are the right one

Link to comment
Share on other sites

this is from /var/run/dmesg.boot

 

[    0.000000] Linux version 3.2.11 (root@debian) (gcc version 4.2.0) #4 SMP Sat Jul 6 17:38:11 CEST 2013
[    0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=000a70523d02 mac4=000a70523d03 sn=B5JDN00000 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006ec3c000 (usable)
[    0.000000]  BIOS-e820: 000000006ec3c000 - 000000006ec90000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ec90000 - 000000006ecb1000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecb1000 - 000000006ecc2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ecc2000 - 000000006ecd8000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecd8000 - 000000006ecd9000 (usable)
[    0.000000]  BIOS-e820: 000000006ecd9000 - 000000006ecda000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ecda000 - 000000006ecdd000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecdd000 - 000000006ece4000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ece4000 - 000000006ed48000 (reserved)
[    0.000000]  BIOS-e820: 000000006ed48000 - 000000006ed8b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ed8b000 - 000000006ef00000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/E45M1-M PRO, BIOS 1202 08/07/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x6ef00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 06EF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 06F000000 mask FFF000000 uncachable
[    0.000000]   3 base 070000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [ffff8800000fce20] fce20
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-000000006ef00000
[    0.000000]  0000000000 - 0040000000 page 1G
[    0.000000]  0040000000 - 006ee00000 page 2M
[    0.000000]  006ee00000 - 006ef00000 page 4k
[    0.000000] kernel direct mapping tables up to 6ef00000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 6e691000 - 6ec2c000
[    0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 000000006ec85068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000006ec8b2e8 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 000000006ec85150 06192 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 000000006ece3f80 00040
[    0.000000] ACPI: APIC 000000006ec8b3e0 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 000000006ec8b448 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 000000006ec8b488 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 000000006ec8b4c0 003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 000000006ec8b8a0 0168E (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006c200000-ffff88006dbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0006ec3c
[    0.000000]     0: 0x0006ecd8 -> 0x0006ecd9
[    0.000000]     0: 0x0006ed8b -> 0x0006ef00
[    0.000000] On node 0 totalpages: 453951
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6157 pages used for memmap
[    0.000000]   DMA32 zone: 443813 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000006ec3c000 - 000000006ec90000
[    0.000000] PM: Registered nosave memory: 000000006ec90000 - 000000006ecb1000
[    0.000000] PM: Registered nosave memory: 000000006ecb1000 - 000000006ecc2000
[    0.000000] PM: Registered nosave memory: 000000006ecc2000 - 000000006ecd8000
[    0.000000] PM: Registered nosave memory: 000000006ecd9000 - 000000006ecda000
[    0.000000] PM: Registered nosave memory: 000000006ecda000 - 000000006ecdd000
[    0.000000] PM: Registered nosave memory: 000000006ecdd000 - 000000006ece4000
[    0.000000] PM: Registered nosave memory: 000000006ece4000 - 000000006ed48000
[    0.000000] PM: Registered nosave memory: 000000006ed48000 - 000000006ed8b000
[    0.000000] Allocating PCI resources starting at 6ef00000 (gap: 6ef00000:8fd00000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006e400000 s69824 r8192 d24384 u1048576
[    0.000000] pcpu-alloc: s69824 r8192 d24384 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 447733
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=000a70523d02 mac4=000a70523d03 sn=B5JDN00000 
[    0.000000] Internal HD num: 0
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hareware Version: DS3612xs-j
[    0.000000] Mac1: 00113208d62a
[    0.000000] Mac2: 00113208d62b
[    0.000000] Mac3: 000a70523d02
[    0.000000] Mac4: 000a70523d03
[    0.000000] Serial Number: B5JDN00000
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 1770356k/1817600k available (4737k kernel code, 1796k absent, 45448k reserved, 3845k data, 428k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1650.121 MHz processor.
[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3300.24 BogoMIPS (lpj=1650121)
[    0.001271] pid_max: default: 32768 minimum: 301
[    0.001488] Mount-cache hash table entries: 256
[    0.002149] tseg: 006ef00000
[    0.002153] CPU: Physical Processor ID: 0
[    0.002286] CPU: Processor Core ID: 0
[    0.002417] mce: CPU supports 6 MCE banks
[    0.002628] ACPI: Core revision 20110623
[    0.008816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.018970] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00
[    0.019998] Performance Events: AMD PMU driver.
[    0.019998] ... version:                0
[    0.019998] ... bit width:              48
[    0.019998] ... generic registers:      4
[    0.019998] ... value mask:             0000ffffffffffff
[    0.019998] ... max period:             00007fffffffffff
[    0.019998] ... fixed-purpose events:   0
[    0.019998] ... event mask:             000000000000000f
[    0.020290] Booting Node   0, Processors  #1 Ok.
[    0.020475] smpboot cpu 1: start_ip = 98000
[    0.092008] Brought up 2 CPUs
[    0.092163] Total of 2 processors activated (6599.80 BogoMIPS).
[    0.093207] PM: Registering ACPI NVS region at 6ec3c000 (344064 bytes)
[    0.093373] PM: Registering ACPI NVS region at 6ecb1000 (69632 bytes)
[    0.093503] PM: Registering ACPI NVS region at 6ecd9000 (4096 bytes)
[    0.093631] PM: Registering ACPI NVS region at 6ecdd000 (28672 bytes)
[    0.093774] PM: Registering ACPI NVS region at 6ed48000 (274432 bytes)
[    0.094104] xor: automatically using best checksumming function: generic_sse
[    0.098994]    generic_sse:  3284.000 MB/sec
[    0.099121] xor: using function: generic_sse (3284.000 MB/sec)
[    0.099332] NET: Registered protocol family 16
[    0.100156] Extended Config Space enabled on 0 nodes
[    0.100339] ACPI: bus type pci registered
[    0.101073] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.101271] PCI: not using MMCONFIG
[    0.101396] PCI: Using configuration type 1 for base access
[    0.101536] PCI: Using configuration type 1 for extended access
[    0.115128] bio: create slab  at 0
[    0.132874] raid6: int64x1    855 MB/s
[    0.149892] raid6: int64x2    960 MB/s
[    0.166875] raid6: int64x4    941 MB/s
[    0.183925] raid6: int64x8    800 MB/s
[    0.200851] raid6: sse2x1    1394 MB/s
[    0.217875] raid6: sse2x2    1632 MB/s
[    0.234844] raid6: sse2x4    2335 MB/s
[    0.234976] raid6: using algorithm sse2x4 (2335 MB/s)
[    0.235126] ACPI: Added _OSI(Module Device)
[    0.235268] ACPI: Added _OSI(Processor Device)
[    0.235395] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.235538] ACPI: Added _OSI(Processor Aggregator Device)
[    0.236874] ACPI: EC: Look up EC in DSDT
[    0.238808] ACPI: Executed 3 blocks of module-level executable AML code
[    0.242792] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.242978] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[    0.246570] ACPI: Interpreter enabled
[    0.246697] ACPI: (supports S0 S4 S5)
[    0.246982] ACPI: Using IOAPIC for interrupt routing
[    0.247382] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.247671] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.285166] ACPI: No dock devices found.
[    0.285336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.285827] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.286414] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.286576] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.286707] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.287009] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.287246] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff]
[    0.287442] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[    0.287652] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[    0.287709] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300
[    0.287725] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.287735] pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
[    0.287745] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[    0.287803] pci 0000:00:01.0: supports D1 D2
[    0.287827] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[    0.287839] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
[    0.287906] pci 0000:00:01.1: supports D1 D2
[    0.287987] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[    0.288059] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.288066] pci 0000:00:04.0: PME# disabled
[    0.288113] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.288139] pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
[    0.288153] pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
[    0.288166] pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
[    0.288179] pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
[    0.288192] pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
[    0.288205] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff]
[    0.288282] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.288302] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[    0.288393] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.288418] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[    0.288520] pci 0000:00:12.2: supports D1 D2
[    0.288524] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.288530] pci 0000:00:12.2: PME# disabled
[    0.288559] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.288578] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff]
[    0.288669] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.288695] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff]
[    0.288797] pci 0000:00:13.2: supports D1 D2
[    0.288800] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.288807] pci 0000:00:13.2: PME# disabled
[    0.288836] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.288935] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.289036] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.289093] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.289112] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff]
[    0.289206] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[    0.289305] pci 0000:00:15.0: supports D1 D2
[    0.289340] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[    0.289438] pci 0000:00:15.1: supports D1 D2
[    0.289474] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[    0.289572] pci 0000:00:15.2: supports D1 D2
[    0.289609] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.289627] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[    0.289720] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.289746] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[    0.289848] pci 0000:00:16.2: supports D1 D2
[    0.289852] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.289858] pci 0000:00:16.2: PME# disabled
[    0.289889] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[    0.289939] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[    0.289991] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[    0.290039] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[    0.290097] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[    0.290142] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[    0.290187] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[    0.290231] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[    0.290359] pci 0000:01:00.0: [13c1:1004] type 0 class 0x000104
[    0.290380] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.290397] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea20fff 64bit]
[    0.290409] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.290428] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
[    0.290472] pci 0000:01:00.0: supports D1 D2
[    0.292033] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.292209] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.292216] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.292225] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.292308] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[    0.292437] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.292442] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.292448] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.292454] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.292521] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.292756] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.292783] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.292821] pci 0000:04:00.0: reg 18: [mem 0xd2004000-0xd2004fff 64bit pref]
[    0.292847] pci 0000:04:00.0: reg 20: [mem 0xd2000000-0xd2003fff 64bit pref]
[    0.292951] pci 0000:04:00.0: supports D1 D2
[    0.292955] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.292985] pci 0000:04:00.0: PME# disabled
[    0.294998] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.295154] pci 0000:00:15.1:   bridge window [io  0xd000-0xdfff]
[    0.295165] pci 0000:00:15.1:   bridge window [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.295251] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604
[    0.295389] pci 0000:00:15.2: PCI bridge to [bus 05-06]
[    0.295536] pci 0000:00:15.2:   bridge window [io  0xc000-0xcfff]
[    0.295542] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.295622] pci 0000:06:02.0: [1106:3044] type 0 class 0x000c00
[    0.295659] pci 0000:06:02.0: reg 10: [mem 0xfe900000-0xfe9007ff]
[    0.295680] pci 0000:06:02.0: reg 14: [io  0xc000-0xc07f]
[    0.295823] pci 0000:06:02.0: supports D2
[    0.295826] pci 0000:06:02.0: PME# supported from D2 D3hot D3cold
[    0.295835] pci 0000:06:02.0: PME# disabled
[    0.295919] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.295977] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.295985] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.295999] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.296003] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff] (subtractive decode)
[    0.296008] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.296013] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.296060] pci_bus 0000:00: on NUMA node 0
[    0.296072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.296406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.296466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[    0.296524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[    0.296590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[    0.296650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22.BR23._PRT]
[    0.296741]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.296974]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.297196] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.310125] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.311107] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.311751] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.312429] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.313054] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.313635] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.314211] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.314805] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.315447] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.315990] vgaarb: loaded
[    0.316147] vgaarb: bridge control possible 0000:00:01.0
[    0.316441] SCSI subsystem initialized
[    0.317040] libata version 3.00 loaded.
[    0.317040] PCI: Using ACPI for IRQ routing
[    0.328653] PCI: pci_cache_line_size set to 64 bytes
[    0.328806] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.328811] reserve RAM buffer: 000000006ec3c000 - 000000006fffffff 
[    0.328818] reserve RAM buffer: 000000006ecd9000 - 000000006fffffff 
[    0.328823] reserve RAM buffer: 000000006ef00000 - 000000006fffffff 
[    0.329106] Switching to clocksource hpet
[    0.329220] pnp: PnP ACPI init
[    0.329318] ACPI: bus type pnp registered
[    0.329789] pnp 00:00: [bus 00-ff]
[    0.329794] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.329798] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.329803] pnp 00:00: [io  0x0d00-0xffff window]
[    0.329807] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.329811] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.329815] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[    0.329818] pnp 00:00: [mem 0x00000000 window]
[    0.329966] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.330055] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.330206] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.330350] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.331186] pnp 00:02: [io  0x040b]
[    0.331190] pnp 00:02: [io  0x04d6]
[    0.331194] pnp 00:02: [io  0x0c00-0x0c01]
[    0.331198] pnp 00:02: [io  0x0c14]
[    0.331201] pnp 00:02: [io  0x0c50-0x0c51]
[    0.331205] pnp 00:02: [io  0x0c52]
[    0.331208] pnp 00:02: [io  0x0c6c]
[    0.331211] pnp 00:02: [io  0x0c6f]
[    0.331214] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.331218] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.331221] pnp 00:02: [io  0x0cd4-0x0cd5]
[    0.331224] pnp 00:02: [io  0x0cd6-0x0cd7]
[    0.331228] pnp 00:02: [io  0x0cd8-0x0cdf]
[    0.331231] pnp 00:02: [io  0x0800-0x089f]
[    0.331235] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.331239] pnp 00:02: [io  0x0000-0x000f]
[    0.331242] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.331245] pnp 00:02: [io  0x0900-0x090f]
[    0.331249] pnp 00:02: [io  0x0910-0x091f]
[    0.331252] pnp 00:02: [io  0xfe00-0xfefe]
[    0.331256] pnp 00:02: [io  0x0060-0x005f disabled]
[    0.331259] pnp 00:02: [io  0x0064-0x0063 disabled]
[    0.331264] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.331267] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.331271] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[    0.331277] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[    0.331280] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[    0.331284] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.331288] pnp 00:02: [mem 0xffc00000-0xffffffff]
[    0.331523] system 00:02: [io  0x040b] has been reserved
[    0.331667] system 00:02: [io  0x04d6] has been reserved
[    0.331809] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.331939] system 00:02: [io  0x0c14] has been reserved
[    0.332083] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.332228] system 00:02: [io  0x0c52] has been reserved
[    0.332357] system 00:02: [io  0x0c6c] has been reserved
[    0.332485] system 00:02: [io  0x0c6f] has been reserved
[    0.332628] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.332772] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.332906] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.333040] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.333160] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.333296] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.333431] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.333551] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.333669] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.333806] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.333927] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.334061] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.334197] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.334334] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.334455] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.334575] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.334699] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[    0.334836] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335065] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.335070] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.335074] pnp 00:03: [io  0x0290-0x029f]
[    0.335078] pnp 00:03: [io  0x0a20-0x0a2f]
[    0.335205] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.335342] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.335462] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335738] pnp 00:04: [dma 4]
[    0.335742] pnp 00:04: [io  0x0000-0x000f]
[    0.335745] pnp 00:04: [io  0x0081-0x0083]
[    0.335749] pnp 00:04: [io  0x0087]
[    0.335752] pnp 00:04: [io  0x0089-0x008b]
[    0.335755] pnp 00:04: [io  0x008f]
[    0.335758] pnp 00:04: [io  0x00c0-0x00df]
[    0.335924] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.335955] pnp 00:05: [io  0x0070-0x0071]
[    0.335975] pnp 00:05: [irq 8]
[    0.336144] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.336164] pnp 00:06: [io  0x0061]
[    0.336292] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.336356] pnp 00:07: [io  0x0010-0x001f]
[    0.336360] pnp 00:07: [io  0x0022-0x003f]
[    0.336364] pnp 00:07: [io  0x0044-0x005f]
[    0.336367] pnp 00:07: [io  0x0072-0x007f]
[    0.336371] pnp 00:07: [io  0x0080]
[    0.336374] pnp 00:07: [io  0x0084-0x0086]
[    0.336377] pnp 00:07: [io  0x0088]
[    0.336380] pnp 00:07: [io  0x008c-0x008e]
[    0.336383] pnp 00:07: [io  0x0090-0x009f]
[    0.336386] pnp 00:07: [io  0x00a2-0x00bf]
[    0.336389] pnp 00:07: [io  0x00e0-0x00ef]
[    0.336393] pnp 00:07: [io  0x04d0-0x04d1]
[    0.336573] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.336697] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336716] pnp 00:08: [io  0x00f0-0x00ff]
[    0.336733] pnp 00:08: [irq 13]
[    0.336909] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.337096] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337146] pnp 00:0a: [io  0x0060]
[    0.337149] pnp 00:0a: [io  0x0064]
[    0.337174] pnp 00:0a: [irq 1]
[    0.337281] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.337680] pnp 00:0b: [mem 0x6f000000-0x7effffff]
[    0.337898] system 00:0b: [mem 0x6f000000-0x7effffff] could not be reserved
[    0.338065] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.338336] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.338475] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.338487] pnp: PnP ACPI: found 13 devices
[    0.338621] ACPI: ACPI bus type pnp unregistered
[    0.351473] PCI: max bus depth: 2 pci_try_num: 3
[    0.351546] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.351683] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.351829] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.351962] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.352233] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.352376] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.352514] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.352658] pci 0000:00:15.1:   bridge window [io  0xd000-0xdfff]
[    0.352809] pci 0000:00:15.1:   bridge window [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.353038] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[    0.353159] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.353301] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.353448] pci 0000:00:15.2: PCI bridge to [bus 05-06]
[    0.353567] pci 0000:00:15.2:   bridge window [io  0xc000-0xcfff]
[    0.353690] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.353866] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353989] pci 0000:00:04.0: setting latency timer to 64
[    0.354016] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.354149] pci 0000:00:15.0: setting latency timer to 64
[    0.354159] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.354295] pci 0000:00:15.1: setting latency timer to 64
[    0.354305] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.354442] pci 0000:00:15.2: setting latency timer to 64
[    0.354460] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.354583] pci 0000:05:00.0: setting latency timer to 64
[    0.354591] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.354595] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.354599] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.354603] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[    0.354607] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.354611] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.354616] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.354620] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.354624] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.354628] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.354632] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[    0.354637] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.354641] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.354645] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.354649] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.354653] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.354657] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.354661] pci_bus 0000:06: resource 4 [io  0xc000-0xcfff]
[    0.354665] pci_bus 0000:06: resource 5 [mem 0xfe900000-0xfe9fffff]
[    0.354803] NET: Registered protocol family 2
[    0.355049] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.355793] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.358263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.359035] TCP: Hash tables configured (established 262144 bind 65536)
[    0.359170] TCP reno registered
[    0.359313] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359463] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359781] NET: Registered protocol family 1
[    0.360198] RPC: Registered named UNIX socket transport module.
[    0.360352] RPC: Registered udp transport module.
[    0.360478] RPC: Registered tcp transport module.
[    0.360620] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.360779] pci 0000:00:01.0: Boot video device
[    0.360812] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.180249] pci 0000:00:12.0: PCI INT A disabled
[    1.180453] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.180610] pci 0000:00:12.2: PCI INT B disabled
[    1.180760] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.253250] pci 0000:00:13.0: PCI INT A disabled
[    1.253434] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.253594] pci 0000:00:13.2: PCI INT B disabled
[    1.253755] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.326249] pci 0000:00:14.5: PCI INT C disabled
[    1.326442] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.398259] pci 0000:00:16.0: PCI INT A disabled
[    1.398439] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.398610] pci 0000:00:16.2: PCI INT B disabled
[    1.398793] PCI: CLS 64 bytes, default 64
[    1.398897] Trying to unpack rootfs image as initramfs...
[    1.399311] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    1.405887] Freeing initrd memory: 5740k freed
[    1.411318] perf: AMD IBS detected (0x000000ff)
[    1.412718] Intel AES-NI instructions are not detected.
[    1.412870] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    1.421091] VFS: Disk quotas dquot_6.5.2
[    1.421335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.422158] msgmni has been set to 3468
[    1.422994] async_tx: api initialized (async)
[    1.423384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.423607] io scheduler noop registered
[    1.423778] io scheduler cfq registered (default)
[    1.477399] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.501188] brd: module loaded
[    1.501610] Loading iSCSI transport class v2.0-870.
[    1.503026] rdac: device handler registered
[    1.503736] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.504082] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0
[    1.504807] iscsi: registered transport (qla4xxx)
[    1.505153] QLogic iSCSI HBA Driver
[    1.505383] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[    1.505716] mpt2sas version 11.100.00.00 loaded
[    1.506115] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.506341] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.506592] 3w-9xxx 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.506739] 3w-9xxx 0000:01:00.0: setting latency timer to 64
[    1.711238] scsi0 : 3ware 9000 Storage Controller
[    1.712336] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.
[    2.018243] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.
[    2.029972] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    2.030404] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    2.030816] VMware PVSCSI driver - version 1.0.1.0-k
[    2.031590] ahci 0000:00:11.0: version 3.0
[    2.031647] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.031984] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.032234] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.036082] scsi1 : ahci
[    2.036631] scsi2 : ahci
[    2.037318] scsi3 : ahci
[    2.037864] scsi4 : ahci
[    2.038549] scsi5 : ahci
[    2.039164] scsi6 : ahci
[    2.039729] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19
[    2.039959] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19
[    2.040227] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19
[    2.040446] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19
[    2.043286] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19
[    2.043493] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19
[    2.043697] Enable Synology sata fast booting
[    2.412124] Refined TSC clocksource calibration: 1649.962 MHz.
[    2.412292] Switching to clocksource tsc
[    3.875587] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    3.875998] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    3.876211] Copyright (c) 2007 Atheros Corporation.
[    3.876642] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[    3.876947] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25)
[    3.877510] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    3.877673] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.877904] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.878109] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.878543] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[    3.878713] Copyright (c) 2007-2011 Intel Corporation.
[    3.878971] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    3.879439] sky2: driver version 1.30
[    3.879835] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
[    3.880837] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
[    3.881383] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.881548] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.882633] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.882987] rtc_cmos 00:05: RTC can wake from S4
[    3.883435] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.883634] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.883842] i2c /dev entries driver
[    3.884296] md: linear personality registered for level -1
[    3.884449] md: raid0 personality registered for level 0
[    3.884591] md: raid1 personality registered for level 1
[    3.884734] md: raid10 personality registered for level 10
[    3.884876] md: raid6 personality registered for level 6
[    3.885064] md: raid5 personality registered for level 5
[    3.885222] md: raid4 personality registered for level 4
[    3.885715] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.885990] cpuidle: using governor ladder
[    3.886176] cpuidle: using governor menu
[    3.886653] TCP cubic registered
[    3.886802] NET: Registered protocol family 17
[    3.887812] rtc_cmos 00:05: setting system clock to 2013-07-09 19:49:15 UTC (1373399355)
[    4.178259] ata4: SATA link down (SStatus 0 SControl 300)
[    4.178474] ata2: SATA link down (SStatus 0 SControl 300)
[    4.178651] ata3: SATA link down (SStatus 0 SControl 300)
[    4.178836] ata5: SATA link down (SStatus 0 SControl 300)
[    4.179150] ata6: SATA link down (SStatus 0 SControl 300)
[    4.333272] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.333917] ata1.00: ATA-8: STT_FTM32GX25H, 1819, max UDMA/133
[    4.334101] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    4.336194] ata1.00: configured for UDMA/133
[    4.336457] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
[    4.336913] scsi 1:0:0:0: Direct-Access     ATA      STT_FTM32GX25H   1819 PQ: 0 ANSI: 5
[    4.337904] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    4.338304] sd 1:0:0:0: [sdb] Write Protect is off
[    4.338466] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.338521] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.339524]  sdb: sdb1 sdb2
[    4.340755] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.340965] md: Waiting for all devices to be available before autodetect
[    4.341148] md: If you don't use raid, use raid=noautodetect
[    4.341761] md: Autodetecting RAID arrays.
[    4.342454] md: Scanned 2 and added 2 devices.
[    4.342622] md: autorun ...
[    4.342759] md: considering sdb1 ...
[    4.342905] md:  adding sdb1 ...
[    4.343072] md: sdb2 has different UUID to sdb1
[    4.343219] md: created md0
[    4.343359] md: bind
[    4.343514] md: running: 
[    4.344016] bio: create slab  at 1
[    4.344342] md/raid1:md0: active with 1 out of 12 mirrors
[    4.344542] md0: detected capacity change from 0 to 2549940224
[    4.344785] md: considering sdb2 ...
[    4.344943] md:  adding sdb2 ...
[    4.345353] md: created md1
[    4.345501] md: bind
[    4.345645] md: running: 
[    4.346178] md/raid1:md1: active with 1 out of 12 mirrors
[    4.346384] md1: detected capacity change from 0 to 2147418112
[    4.346678] md: ... autorun DONE.
[    4.347170]  md1: unknown partition table
[    4.347595] RAMDISK: gzip image found at block 0
[    4.609302] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    4.625252] e1000e: Intel(R) PRO/1000 Network Driver - 2.4.14-NAPI
[    4.625417] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    4.638776] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
[    4.638996] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.639184] r8168 0000:04:00.0: setting latency timer to 64
[    4.639279] r8168 0000:04:00.0: irq 40 for MSI/MSI-X
[    4.650222] eth%d: 0xffffc9000005a000, 60:a4:4c:b2:96:b5, IRQ 40
[    4.652918] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    4.653198] r8168  Copyright (C) 2013  Realtek NIC software team 
[    4.653201]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
[    4.653203]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
[    4.657300] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    4.657468] Disabling lock debugging due to kernel taint
[    4.661396] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
[    4.661711] IP: [] syno_libata_index_get_by_map+0x36/0x83
[    4.661905] PGD 6aeec067 PUD 6dfb3067 PMD 0 
[    4.662005] Oops: 0000 [#1] SMP 
[    4.662005] CPU 0 
[    4.662005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
[    4.662005] 
[    4.662005] Pid: 1262, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
[    4.662005] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
[    4.662005] RSP: 0018:ffff88006df6fd48  EFLAGS: 00010286
[    4.662005] RAX: 0000000000000000 RBX: ffff88006df6fd58 RCX: 0000000000000000
[    4.662005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006df6fd58
[    4.662005] RBP: ffff88006df78000 R08: ffffffff81921c60 R09: 0000000000000000
[    4.662005] R10: ffff88006ac10000 R11: 0000000000000016 R12: 0000000000000000
[    4.662005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
[    4.662005] FS:  0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000
[    4.662005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    4.662005] CR2: 0000000000000068 CR3: 000000006b244000 CR4: 00000000000006f0
[    4.662005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.662005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    4.662005] Process insmod (pid: 1262, threadinfo ffff88006df6e000, task ffff88006ddd2bb0)
[    4.662005] Stack:
[    4.662005]  ffff88006df78000 ffffffff812077f8 0000000000000000 ffffffffa009f720
[    4.662005]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
[    4.662005]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
[    4.662005] Call Trace:
[    4.662005]  [] ? scsi_host_lookup+0x46/0x4e
[    4.662005]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
[    4.662005]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
[    4.662005]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
[    4.662005]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
[    4.662005]  [] ? do_one_initcall+0x79/0x127
[    4.662005]  [] ? sys_init_module+0x104a/0x11ef
[    4.662005]  [] ? fput+0x175/0x196
[    4.662005]  [] ? filp_close+0x64/0x6c
[    4.662005]  [] ? system_call_fastpath+0x16/0x1b
[    4.662005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
[    4.662005] RIP  [] syno_libata_index_get_by_map+0x36/0x83
[    4.662005]  RSP 
[    4.662005] CR2: 0000000000000068
[    4.671925] ---[ end trace cae5b573fff8f57c ]---
[    4.706453]  md0: unknown partition table
[    4.994118] EXT4-fs (md0): barriers disabled
[    4.994952] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[    5.046092] synoacl module [synoacl_ext4] is not loaded 
[    5.046249] synoacl module [synoacl_vfs] is not loaded 
[    5.059500] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
[    5.074956] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[    5.075230] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[    5.075377] Trying to move old root to /initrd ... okay
[    5.078298] Freeing unused kernel memory: 428k freed
[    5.078646] Write protecting the kernel read-only data: 8192k
[    5.086783] Freeing unused kernel memory: 1388k freed
[    5.088941] Freeing unused kernel memory: 196k freed
[    5.119043] EXT4-fs (md0): re-mounted. Opts: (null)

Link to comment
Share on other sites

here a new log, 3ware controller are found but the same fail.

 

The System is a ASUS e45m1-m pro, 2gb ddr3, boot by USB-stick, System HDD: Onboard SATA-Controller with 32GB SSD DISK, 3ware Controlle see post's before.

 

insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/aesni-intel.ko': No such device
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
insmod: can't insert '/lib/modules/synobios.ko': File exists
Jul 10 17:56:53 syslogd started: BusyBox v1.16.1
Jul 10 17:56:53 kernel: [    1.421336] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 10 17:56:53 kernel: [    1.498877] 3ware Storage Controller device driver for Linux v1.26.02.003.
Jul 10 17:56:53 kernel: [    1.499165] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Jul 10 17:56:53 kernel: [    1.704296] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.
Jul 10 17:56:53 kernel: [    2.010237] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.
Jul 10 17:56:53 kernel: [    2.035023] Enable Synology sata fast booting
Jul 10 17:56:53 kernel: [    4.328620] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
Jul 10 17:56:53 kernel: [    4.335445] md: sdb2 has different UUID to sdb1
Jul 10 17:56:53 kernel: [    4.644826] r8168  Copyright (C) 2013  Realtek NIC software team 
Jul 10 17:56:53 kernel: [    4.644829]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
Jul 10 17:56:53 kernel: [    4.644832]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
Jul 10 17:56:53 kernel: [    4.648720] bromolow_synobios: module license 'Synology Inc.' taints kernel.
Jul 10 17:56:53 kernel: [    4.648886] Disabling lock debugging due to kernel taint
Jul 10 17:56:53 kernel: [    4.651722] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
Jul 10 17:56:53 kernel: [    4.652006] IP: [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 17:56:53 kernel: [    4.652006] PGD 678bc067 PUD 678bd067 PMD 0 
Jul 10 17:56:53 kernel: [    4.652006] Oops: 0000 [#1] SMP 
Jul 10 17:56:53 kernel: [    4.652006] CPU 0 
Jul 10 17:56:53 kernel: [    4.652006] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
Jul 10 17:56:53 kernel: [    4.652006] 
Jul 10 17:56:53 kernel: [    4.652006] Pid: 1262, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
Jul 10 17:56:53 kernel: [    4.652006] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 17:56:53 kernel: [    4.652006] RSP: 0018:ffff88006ae67d48  EFLAGS: 00010286
Jul 10 17:56:53 kernel: [    4.652006] RAX: 0000000000000000 RBX: ffff88006ae67d58 RCX: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006ae67d58
Jul 10 17:56:53 kernel: [    4.652006] RBP: ffff88006b37c000 R08: ffffffff81921c60 R09: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] R10: ffff88006ac49200 R11: 0000000000000016 R12: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
Jul 10 17:56:53 kernel: [    4.652006] FS:  0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jul 10 17:56:53 kernel: [    4.652006] CR2: 0000000000000068 CR3: 00000000678bf000 CR4: 00000000000006f0
Jul 10 17:56:53 kernel: [    4.652006] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul 10 17:56:53 kernel: [    4.652006] Process insmod (pid: 1262, threadinfo ffff88006ae66000, task ffff88006dd60250)
Jul 10 17:56:53 kernel: [    4.652006] Stack:
Jul 10 17:56:53 kernel: [    4.652006]  ffff88006b37c000 ffffffff812077f8 0000000000000000 ffffffffa009f720
Jul 10 17:56:53 kernel: [    4.652006]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
Jul 10 17:56:53 kernel: [    4.652006]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
Jul 10 17:56:53 kernel: [    4.652006] Call Trace:
Jul 10 17:56:53 kernel: [    4.652006]  [] ? scsi_host_lookup+0x46/0x4e
Jul 10 17:56:53 kernel: [    4.652006]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
Jul 10 17:56:53 kernel: [    4.652006]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
Jul 10 17:56:53 kernel: [    4.652006]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
Jul 10 17:56:53 kernel: [    4.652006]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
Jul 10 17:56:53 kernel: [    4.652006]  [] ? do_one_initcall+0x79/0x127
Jul 10 17:56:53 kernel: [    4.652006]  [] ? sys_init_module+0x104a/0x11ef
Jul 10 17:56:53 kernel: [    4.652006]  [] ? fput+0x175/0x196
Jul 10 17:56:53 kernel: [    4.652006]  [] ? filp_close+0x64/0x6c
Jul 10 17:56:53 kernel: [    4.652006]  [] ? system_call_fastpath+0x16/0x1b
Jul 10 17:56:53 kernel: [    4.652006] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
Jul 10 17:56:53 kernel: [    4.652006] RIP  [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 17:56:53 kernel: [    4.652006]  RSP 
Jul 10 17:56:53 kernel: [    4.652006] CR2: 0000000000000068
Jul 10 17:56:53 kernel: [    4.662237] ---[ end trace 16b7282d3ce12da0 ]---
Jul 10 17:56:53 kernel: [    5.083628] synoacl module [synoacl_ext4] is not loaded 
Jul 10 17:56:53 kernel: [    5.083787] synoacl module [synoacl_vfs] is not loaded 
Jul 10 17:56:53 kernel: [    5.096800] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
Jul 10 17:56:53 kernel: [    6.068166] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0)
Jul 10 17:56:53 kernel: [    6.094674] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel)
Jul 10 17:56:53 kernel: [    6.128799] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel)
Jul 10 17:56:53 kernel: [    6.138799] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel)
Jul 10 17:56:53 kernel: [    6.147489] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel)
Jul 10 17:56:53 kernel: [    6.156795] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel)
Jul 10 17:56:53 kernel: [    6.165814] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel)
Jul 10 17:56:53 kernel: [    6.174378] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel)
Jul 10 17:56:53 kernel: [    6.184562] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel)
Jul 10 17:56:53 kernel: [    6.194361] cryptomgr: exports duplicate symbol alg_test (owned by kernel)
Jul 10 17:56:53 kernel: [    6.212647] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel)
Jul 10 17:56:53 kernel: [    6.223291] rng: exports duplicate symbol crypto_default_rng (owned by kernel)
Jul 10 17:56:53 kernel: [    6.274336] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel)
Jul 10 17:56:53 kernel: [    6.289368] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel)
Jul 10 17:56:53 kernel: [    6.319686] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel)
Jul 10 17:56:53 kernel: [    6.373686] libcrc32c: exports duplicate symbol crc32c (owned by kernel)
Jul 10 17:56:53 kernel: [    6.383803] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel)
Jul 10 17:56:53 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul 10 17:56:53 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: scemd.c:127 open /dev/synobios error!
Jul 10 17:56:58 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used.
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul 10 17:56:58 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set
Jul 10 17:56:58 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul 10 17:56:58 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul 10 17:56:58 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul 10 17:56:58 scemd: external_microp_id_check.c:44 Fail to open synobios
platform error
Jul 10 17:56:58 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 17:56:59 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory
Jul 10 17:56:59 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd
Jul 10 17:56:59 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul 10 17:56:59 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul 10 17:56:59 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Jul 10 17:56:59 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul 10 17:56:59 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul 10 17:56:59 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul 10 17:56:59 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd
Jul 10 17:56:59 synousbdisk: RCClean succeeded
Jul 10 17:56:59 synosata: synosata.c:152 no external sata devices granted
Jul 10 17:57:00 synoexternal: write to uart2 error, error=(5)Input/output error
killall: synolunbkp: no process killed
Jul 10 17:57:01 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul 10 17:57:01 kernel: [   14.833889] Got empty serial number. Generate serial number from product.
Jul 10 17:57:02 synoexternal: write to uart2 error, error=(5)Input/output error
Jul 10 17:57:03 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab
Jul 10 17:57:04 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Jul 10 17:57:04 avahi-daemon[6656]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record
Jul 10 17:57:04 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul 10 17:57:04 hotplugd: ##### ACTION:add
Jul 10 17:57:04 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul 10 17:57:04 hotplugd: DEVPATH:usb1
Jul 10 17:57:04 hotplugd: SUBSYSTEM:usb
Jul 10 17:57:05 kernel: [   19.227630] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:57:05 kernel: [   19.227754] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:57:05 kernel: [   19.234518] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:57:05 kernel: [   19.234670] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:57:06 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber.
Jul 10 17:57:06 kernel: [   19.630483] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:57:06 kernel: [   19.630615] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:57:06 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000)
Jul 10 17:57:06 syslogd exiting
insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/aesni-intel.ko': No such device
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
insmod: can't insert '/lib/modules/synobios.ko': File exists
Jul 10 17:59:02 syslogd started: BusyBox v1.16.1
Jul 10 17:59:02 kernel: [    6.102917] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0)
Jul 10 17:59:02 kernel: [    6.128582] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel)
Jul 10 17:59:02 kernel: [    6.160115] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel)
Jul 10 17:59:02 kernel: [    6.170948] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel)
Jul 10 17:59:02 kernel: [    6.179608] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel)
Jul 10 17:59:02 kernel: [    6.189816] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel)
Jul 10 17:59:02 kernel: [    6.201858] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel)
Jul 10 17:59:02 kernel: [    6.211766] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel)
Jul 10 17:59:02 kernel: [    6.220595] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel)
Jul 10 17:59:02 kernel: [    6.230363] cryptomgr: exports duplicate symbol alg_test (owned by kernel)
Jul 10 17:59:02 kernel: [    6.249399] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel)
Jul 10 17:59:02 kernel: [    6.259379] rng: exports duplicate symbol crypto_default_rng (owned by kernel)
Jul 10 17:59:02 kernel: [    6.310305] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel)
Jul 10 17:59:02 kernel: [    6.326304] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel)
Jul 10 17:59:02 kernel: [    6.357446] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel)
Jul 10 17:59:02 kernel: [    6.412183] libcrc32c: exports duplicate symbol crc32c (owned by kernel)
Jul 10 17:59:02 kernel: [    6.421773] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel)
Jul 10 17:59:02 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul 10 17:59:02 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: scemd.c:127 open /dev/synobios error!
Jul 10 17:59:07 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used.
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul 10 17:59:07 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set
Jul 10 17:59:07 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul 10 17:59:07 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul 10 17:59:07 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:07 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:07 scemd: smartctl_enable.c:92 AtaSmartEnable failed.
Jul 10 17:59:07 scemd: SmartDataRead(107) enable smart /dev/sda fail
Jul 10 17:59:07 scemd: disk_temperature_get.c:71 read value /dev/sda fail
Jul 10 17:59:07 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul 10 17:59:07 scemd: external_microp_id_check.c:44 Fail to open synobios
platform error
Jul 10 17:59:07 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 17:59:08 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory
Jul 10 17:59:08 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd
Jul 10 17:59:08 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul 10 17:59:08 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul 10 17:59:08 kernel: [   12.611226] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1.
Jul 10 17:59:08 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Jul 10 17:59:08 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul 10 17:59:08 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 synocheckvolume: smartctl_enable.c:92 AtaSmartEnable failed.
Jul 10 17:59:08 synocheckvolume: SmartDataRead(107) enable smart /dev/sda fail
Jul 10 17:59:08 synocheckvolume: disk_temperature_get.c:71 read value /dev/sda fail
Jul 10 17:59:08 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul 10 17:59:08 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd
Jul 10 17:59:08 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul 10 17:59:08 synousbdisk: RCClean succeeded
Jul 10 17:59:08 synosata: synosata.c:152 no external sata devices granted
Jul 10 17:59:09 synoexternal: write to uart2 error, error=(5)Input/output error
killall: synolunbkp: no process killed
Jul 10 17:59:10 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul 10 17:59:10 kernel: [   14.885289] Got empty serial number. Generate serial number from product.
Jul 10 17:59:11 synoexternal: write to uart2 error, error=(5)Input/output error
Jul 10 17:59:12 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab
Jul 10 17:59:13 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Jul 10 17:59:13 avahi-daemon[6678]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record
Jul 10 17:59:13 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul 10 17:59:13 hotplugd: ##### ACTION:add
Jul 10 17:59:13 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul 10 17:59:13 hotplugd: DEVPATH:usb1
Jul 10 17:59:13 hotplugd: SUBSYSTEM:usb
Jul 10 17:59:14 kernel: [   19.250124] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:59:14 kernel: [   19.250246] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:59:14 kernel: [   19.257165] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:59:14 kernel: [   19.257300] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:59:15 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber.
Jul 10 17:59:15 kernel: [   19.653629] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:59:15 kernel: [   19.653760] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:59:15 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000)
Jul 10 17:59:15 syslogd exiting

 

I hope this helps.

Link to comment
Share on other sites

/var/log/messages

 

insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
Jul 10 09:49:39 syslogd started: BusyBox v1.16.1
Jul 10 09:49:40 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul 10 09:49:40 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(706): value=[cups] and default value=[cups] not matched
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(706): value=[cups] and default value=[cups] not matched
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(796): append default setting = [printcap name=cups]
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(796): append default setting = [winbind enum groups=yes]
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(796): append default setting = [realm=*]
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(796): append default setting = [passdb backend=smbpasswd]
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(796): append default setting = [printing=cups]
Jul 10 09:49:40 s30_synocheckuser: CheckSmbConf(796): append default setting = [winbind enum users=yes]
Jul 10 09:49:42 dhcpcd[4055]: dhcpReboot: do not want cache
Jul 10 19:49:43 dhcpcd[4066]: dhcpReboot: do not want cache
Jul 10 19:49:44 synonet: net_default_gateway_set.c:36 failed to set default gateway 192.168.1.1 (256).
Jul 10 19:49:44 synonet: net_default_gateway_set.c:36 failed to set default gateway 192.168.1.1 (256).
Jul 10 19:49:44 synonet: SYNOLogChangeSize : logfile /var/log/synosys.log not existed
Jul 10 19:49:44 dhcpcd[4173]: dhcpReboot: do not want cache
Jul 10 19:49:49 scemd: scemd.c:154 fan_type=9, raid_type=1, led_type=3, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=2, eunit_pwron_type=2, pis_type=0, rtc_type=3, lcm_type=2, wifi_wps_type=0
Jul 10 19:49:50 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW 
Jul 10 19:49:51 scemd: modules/fan_check_common.c:454 can't read data.
Jul 10 19:49:51 scemd: modules/fan_check_common.c:518 can't get ttyS1 data.
Jul 10 19:49:51 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul 10 19:49:51 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul 10 19:49:51 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul 10 19:49:51 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul 10 19:49:51 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul 10 19:49:51 scemd: modules/scemd_connector.c:103 scemd connector thread start.
Jul 10 19:49:51 scemd: enclosure_list_enum.c:41 SYNOEnclosureExpanderEnum() failed. [0x0D00]
Jul 10 19:49:51 scemd: enclosure_enum_by_valid_link.c:589 Fail to SYNOEnclosureListEnum().
Jul 10 19:49:51 scemd: modules/lcm_menu.c:592 Doesn't support CdcAcm for LCM module.
Jul 10 19:49:51 scemd: scemd.c:154 fan_type=9, raid_type=1, led_type=3, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=2, eunit_pwron_type=2, pis_type=0, rtc_type=3, lcm_type=2, wifi_wps_type=0
Jul 10 19:49:51 scemd: scemd.c:353 WIFI/WPS button is not support on this model.
Jul 10 19:49:51 kernel: [   26.646505] xhci_hcd 0000:00:14.0: Failed to enable MSI-X
Jul 10 19:49:51 kernel: [   26.647643] BUG: unable to handle kernel NULL pointer dereference at           (null)
Jul 10 19:49:51 kernel: [   26.647870] IP:
Killed
Jul 10 19:49:51 kernel: [   26.648013] PGD 197fff067 PUD 197b69067 PMD 0 
Jul 10 19:49:51 kernel: [   26.648209] Oops: 0000 [#1] SMP 
Jul 10 19:49:51 kernel: [   26.648369] CPU 2 
Jul 10 19:49:51 kernel: [   26.648406] Modules linked in: xhci_hcd(+) ohci_hcd ehci_hcd bromolow_synobios(P) synoacl_ext4(P) synoacl_vfs(P) btrfs hfsplus md4 hmac fuse vfat fat aesni_intel ecryptfs sha512_generic sha256_generic ecb chainiv des_generic
Jul 10 19:49:51 kernel: [   26.650867] 
Jul 10 19:49:51 kernel: [   26.650959] Pid: 4669, comm: insmod Tainted: P           O 3.2.11 #4 ASUS All Series/GRYPHON Z87
Jul 10 19:49:51 kernel: [   26.651220] RIP: 0010:[]  [] xhci_hub_control+0x5b3/0xa65 [xhci_hcd]
Jul 10 19:49:51 kernel: [   26.651422] RSP: 0000:ffff8801985834c8  EFLAGS: 00010086
Jul 10 19:49:51 kernel: [   26.651522] RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000000202
Jul 10 19:49:51 kernel: [   26.651626] RDX: 00000000000002a0 RSI: ffff880197d488f0 RDI: ffff880198c8f048
Jul 10 19:49:51 kernel: [   26.651730] RBP: ffff880198c8f000 R08: 000000000000000e R09: 0000000000000000
Jul 10 19:49:51 kernel: [   26.651834] R10: 0000000000000000 R11: ffffffff811b357f R12: 0000000000000008
Jul 10 19:49:51 kernel: [   26.651938] R13: 0000000000000007 R14: ffff880197df4a70 R15: ffff8801979a6000
Jul 10 19:49:51 kernel: [   26.652042] FS:  0000000000000000(0000) GS:ffff88019fa80000(0000) knlGS:0000000000000000
Jul 10 19:49:51 kernel: [   26.652203] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
Jul 10 19:49:51 kernel: [   26.652303] CR2: 0000000000000000 CR3: 000000019831a000 CR4: 00000000001406e0
Jul 10 19:49:51 kernel: [   26.652407] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul 10 19:49:51 kernel: [   26.652511] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Jul 10 19:49:51 kernel: [   26.652615] Process insmod (pid: 4669, threadinfo ffff880198582000, task ffff880199788390)
Jul 10 19:49:51 kernel: [   26.652777] Stack:
Jul 10 19:49:51 kernel: [   26.652870]  000000000000dcc7 000000000000000e 0000000000000046 ffffffff00001cc3
Jul 10 19:49:51 kernel: [   26.653160]  0000000000000202 ffff880197df4a40 ffff880197d488c0 ffff880198c8fa70
Jul 10 19:49:51 kernel: [   26.653449]  ffff880198580000 0000000000000000 ffff880198c8f048 0006ffff8103bd8e
Jul 10 19:49:51 kernel: [   26.653739] Call Trace:
Jul 10 19:49:51 kernel: [   26.653841]  [] ? usb_hcd_submit_urb+0x520/0x6bc [usbcore]
Jul 10 19:49:51 kernel: [   26.653949]  [] ? usb_hcd_giveback_urb+0x60/0x8e [usbcore]
Jul 10 19:49:51 kernel: [   26.654057]  [] ? usb_hcd_submit_urb+0x5bc/0x6bc [usbcore]
Jul 10 19:49:51 kernel: [   26.654164]  [] ? wait_for_common+0x26/0x107
Jul 10 19:49:51 kernel: [   26.654269]  [] ? usb_start_wait_urb+0x39/0xa3 [usbcore]
Jul 10 19:49:51 kernel: [   26.654376]  [] ? usb_control_msg+0xcd/0xf0 [usbcore]
Jul 10 19:49:51 kernel: [   26.654482]  [] ? set_port_feature+0x40/0x45 [usbcore]
Jul 10 19:49:51 kernel: [   26.654588]  [] ? hub_power_on+0x38/0x6b [usbcore]
Jul 10 19:49:51 kernel: [   26.654693]  [] ? hub_activate+0xb1/0x330 [usbcore]
Jul 10 19:49:51 kernel: [   26.654799]  [] ? hub_probe+0x642/0x68e [usbcore]
Jul 10 19:49:51 kernel: [   26.654907]  [] ? usb_probe_interface+0xbf/0xfa [usbcore]
Jul 10 19:49:51 kernel: [   26.655014]  [] ? driver_probe_device+0x99/0x11c
Jul 10 19:49:51 kernel: [   26.655117]  [] ? __driver_attach+0x61/0x61
Jul 10 19:49:51 kernel: [   26.655219]  [] ? bus_for_each_drv+0x46/0x77
Jul 10 19:49:51 kernel: [   26.655320]  [] ? device_attach+0x5c/0x73
Jul 10 19:49:51 kernel: [   26.655422]  [] ? bus_probe_device+0x22/0x3b
Jul 10 19:49:51 kernel: [   26.655525]  [] ? device_add+0x3d2/0x52d
Jul 10 19:49:51 kernel: [   26.655630]  [] ? usb_set_configuration+0x4c6/0x518 [usbcore]
Jul 10 19:49:51 kernel: [   26.655795]  [] ? generic_probe+0x48/0x73 [usbcore]
Jul 10 19:49:51 kernel: [   26.655900]  [] ? driver_probe_device+0x99/0x11c
Jul 10 19:49:51 kernel: [   26.656005]  [] ? __driver_attach+0x61/0x61
Jul 10 19:49:51 kernel: [   26.656106]  [] ? bus_for_each_drv+0x46/0x77
Jul 10 19:49:51 kernel: [   26.656208]  [] ? device_attach+0x5c/0x73
Jul 10 19:49:51 kernel: [   26.656309]  [] ? bus_probe_device+0x22/0x3b
Jul 10 19:49:51 kernel: [   26.656412]  [] ? device_add+0x3d2/0x52d
Jul 10 19:49:51 kernel: [   26.656517]  [] ? usb_new_device+0x2f4/0x33b [usbcore]
Jul 10 19:49:51 kernel: [   26.656624]  [] ? usb_add_hcd+0x3e1/0x5a3 [usbcore]
Jul 10 19:49:51 kernel: [   26.656732]  [] ? usb_hcd_pci_probe+0x203/0x2f6 [usbcore]
Jul 10 19:49:51 kernel: [   26.656841]  [] ? xhci_pci_probe+0x16/0xa2 [xhci_hcd]
Jul 10 19:49:51 kernel: [   26.656947]  [] ? local_pci_probe+0x12/0x16
Jul 10 19:49:51 kernel: [   26.657055]  [] ? pci_device_probe+0x5b/0x83
Jul 10 19:49:51 kernel: [   26.657163]  [] ? driver_probe_device+0x99/0x11c
Jul 10 19:49:51 kernel: [   26.657267]  [] ? driver_probe_device+0x11c/0x11c
Jul 10 19:49:51 kernel: [   26.657370]  [] ? __driver_attach+0x45/0x61
Jul 10 19:49:51 kernel: [   26.657476]  [] ? bus_for_each_dev+0x43/0x6e
Jul 10 19:49:51 kernel: [   26.657586]  [] ? 0xffffffffa00ddfff
Jul 10 19:49:51 kernel: [   26.657688]  [] ? bus_add_driver+0xb2/0x201
Jul 10 19:49:51 kernel: [   26.657791]  [] ? 0xffffffffa00ddfff
Jul 10 19:49:51 kernel: [   26.657892]  [] ? driver_register+0x95/0x101
Jul 10 19:49:51 kernel: [   26.657994]  [] ? 0xffffffffa00ddfff
Jul 10 19:49:51 kernel: [   26.658095]  [] ? __pci_register_driver+0x4f/0xb0
Jul 10 19:49:51 kernel: [   26.658198]  [] ? 0xffffffffa00ddfff
Jul 10 19:49:51 kernel: [   26.658301]  [] ? xhci_hcd_init+0x6/0x22 [xhci_hcd]
Jul 10 19:49:51 kernel: [   26.658405]  [] ? do_one_initcall+0x79/0x127
Jul 10 19:49:51 kernel: [   26.658508]  [] ? sys_init_module+0x104a/0x11ef
Jul 10 19:49:51 kernel: [   26.658612]  [] ? fput+0x175/0x196
Jul 10 19:49:51 kernel: [   26.658713]  [] ? filp_close+0x64/0x6c
Jul 10 19:49:51 kernel: [   26.658816]  [] ? ia32_do_call+0x13/0x13
Jul 10 19:49:51 kernel: [   26.658921] Code: 8f b1 04 00 00 ff c8 4c 8b 74 24 28 66 89 44 24 5e 0f b7 c0 48 c1 e0 03 49 01 c6 49 8b 16 8b 12 48 8b 74 24 30 48 01 c6 48 8b 06 <8b> 08 83 fa ff 0f 84 79 04 00 00 89 d3 81 e3 e9 ff 00 4e 66 41 
Jul 10 19:49:51 kernel: [   26.661306] RIP  [] xhci_hub_control+0x5b3/0xa65 [xhci_hcd]
Jul 10 19:49:51 kernel: [   26.661449]  RSP 
Jul 10 19:49:51 kernel: [   26.661544] CR2: 0000000000000000
Jul 10 19:49:51 kernel: [   26.661641] ---[ end trace 1a6480a3dbc42903 ]---
Jul 10 19:49:51 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul 10 19:49:51 syno_hdd_util: Model:[sT31500341AS], Firmware:[CC1H], S/N:[9VS30Y4L] in [/dev/sda] is not ssd
Jul 10 19:49:51 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul 10 19:49:52 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul 10 19:49:53 synousbdisk: RCClean succeeded
Jul 10 19:49:53 synosata: synosata.c:152 no external sata devices granted
Jul 10 19:49:53 kernel: [   28.999844] Got empty serial number. Generate serial number from product.
Jul 10 19:49:54 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul 10 19:49:56 kernel: [   31.218560] Got empty serial number. Generate serial number from product.
Jul 10 19:49:56 kernel: [   31.218669] drivers/usb/core/hub.c (2040) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 
Jul 10 19:49:56 synoexternal: write to uart2 error, error=(5)Input/output error
Jul 10 19:49:58 kernel: [   33.363161] Got empty serial number. Generate serial number from product.
Jul 10 19:49:58 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab
Jul 10 19:49:58 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 19:49:58 scemd: modules/service.c:178 SCEMD: Failed to put the SysRun light up.
Jul 10 19:49:59 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 19:49:59 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 19:50:00 kernel: [   35.510294] Got empty serial number. Generate serial number from product.
Jul 10 19:50:00 kernel: [   35.524090] Get empty minor:104
Jul 10 19:50:05 kernel: [   40.999381] sd 7:0:0:0: Failed to get diagnostic page 0x8000002
Jul 10 19:50:05 kernel: [   40.999492] sd 7:0:0:0: Failed to bind enclosure -19
Jul 10 19:50:05 kernel: [   41.001253] sd 7:0:0:0: [sdv] No Caching mode page present
Jul 10 19:50:05 kernel: [   41.001355] sd 7:0:0:0: [sdv] Assuming drive cache: write through
Jul 10 19:50:05 kernel: [   41.004000] sd 7:0:0:0: [sdv] No Caching mode page present
Jul 10 19:50:05 kernel: [   41.004103] sd 7:0:0:0: [sdv] Assuming drive cache: write through
Jul 10 19:50:05 kernel: [   41.007367] sd 7:0:0:0: [sdv] No Caching mode page present
Jul 10 19:50:05 kernel: [   41.007481] sd 7:0:0:0: [sdv] Assuming drive cache: write through
Jul 10 19:50:43 initdata.cgi: initdata.cpp:390 Upgrade admin wallpaper setting to 4.0 success
Jul 10 19:50:43 initdata.cgi: net_external_ip_get.c(27) : Failed to get external IP by /usr/syno/sbin/ddnsd, WEXITSTATUS(r)=139
Jul 10 19:51:01 synosshdutils: synosshdutils.c:239 Failed to remove key [shell], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul 10 19:51:01 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul 10 19:51:51 scemd: scemd.c:413 stop manutild.

Link to comment
Share on other sites

/var/run/dmsg.boot

 

[    0.000000] Linux version 3.2.11 (root@debian) (gcc version 4.2.0) #4 SMP Sat Jul 6 17:38:11 CEST 2013
[    0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=0075b9285b46 mac4=0075b9285b47 sn=B5JDN00000 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b987b000 (usable)
[    0.000000]  BIOS-e820: 00000000b987b000 - 00000000b9882000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b9882000 - 00000000b9cc8000 (usable)
[    0.000000]  BIOS-e820: 00000000b9cc8000 - 00000000ba0ee000 (reserved)
[    0.000000]  BIOS-e820: 00000000ba0ee000 - 00000000cc782000 (usable)
[    0.000000]  BIOS-e820: 00000000cc782000 - 00000000cc986000 (reserved)
[    0.000000]  BIOS-e820: 00000000cc986000 - 00000000cc99b000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cc99b000 - 00000000cce3c000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cce3c000 - 00000000cdfff000 (reserved)
[    0.000000]  BIOS-e820: 00000000cdfff000 - 00000000ce000000 (usable)
[    0.000000]  BIOS-e820: 00000000cf000000 - 00000000df200000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000019fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: ASUS All Series/GRYPHON Z87, BIOS 0903 05/07/2013
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F00000000 write-back
[    0.000000]   1 base 0100000000 mask 7F80000000 write-back
[    0.000000]   2 base 0180000000 mask 7FE0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CF000000 mask 7FFF000000 uncachable
[    0.000000]   6 base 019FE00000 mask 7FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] e820 update range: 00000000cf000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fd790] fd790
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000ce000000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00ce000000 page 2M
[    0.000000] kernel direct mapping tables up to ce000000 @ 1fffe000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000019fe00000
[    0.000000]  0100000000 - 0180000000 page 1G
[    0.000000]  0180000000 - 019fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 19fe00000 @ cc780000-cc782000
[    0.000000] RAMDISK: 7fa55000 - 7fff0000
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cc98a078 0006C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cc995e90 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[    0.000000] ACPI: DSDT 00000000cc98a180 0BD0B (v02 ALASKA    A M I 00000021 INTL 20091112)
[    0.000000] ACPI: FACS 00000000cce3a080 00040
[    0.000000] ACPI: APIC 00000000cc995fa0 00092 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000cc996038 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000cc996080 004F7 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000cc996578 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 00000000cc997050 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cc997090 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000cc9970c8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000cc997438 03248 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199800000-ffff88019e9fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0019fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000b987b
[    0.000000]     0: 0x000b9882 -> 0x000b9cc8
[    0.000000]     0: 0x000ba0ee -> 0x000cc782
[    0.000000]     0: 0x000cdfff -> 0x000ce000
[    0.000000]     0: 0x00100000 -> 0x0019fe00
[    0.000000] On node 0 totalpages: 1491171
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 818062 pages, LIFO batch:31
[    0.000000]   Normal zone: 8953 pages used for memmap
[    0.000000]   Normal zone: 645895 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000b987b000 - 00000000b9882000
[    0.000000] PM: Registered nosave memory: 00000000b9cc8000 - 00000000ba0ee000
[    0.000000] PM: Registered nosave memory: 00000000cc782000 - 00000000cc986000
[    0.000000] PM: Registered nosave memory: 00000000cc986000 - 00000000cc99b000
[    0.000000] PM: Registered nosave memory: 00000000cc99b000 - 00000000cce3c000
[    0.000000] PM: Registered nosave memory: 00000000cce3c000 - 00000000cdfff000
[    0.000000] PM: Registered nosave memory: 00000000ce000000 - 00000000cf000000
[    0.000000] PM: Registered nosave memory: 00000000cf000000 - 00000000df200000
[    0.000000] PM: Registered nosave memory: 00000000df200000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at df200000 (gap: df200000:18e00000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88019fa00000 s69824 r8192 d24384 u262144
[    0.000000] pcpu-alloc: s69824 r8192 d24384 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1467877
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=0075b9285b46 mac4=0075b9285b47 sn=B5JDN00000 
[    0.000000] Internal HD num: 0
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hareware Version: DS3612xs-j
[    0.000000] Mac1: 00113208d62a
[    0.000000] Mac2: 00113208d62b
[    0.000000] Mac3: 0075b9285b46
[    0.000000] Mac4: 0075b9285b47
[    0.000000] Serial Number: B5JDN00000
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 5785976k/6813696k available (4737k kernel code, 849012k absent, 178708k reserved, 3845k data, 428k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 1998.873 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3997.74 BogoMIPS (lpj=1998873)
[    0.000201] pid_max: default: 32768 minimum: 301
[    0.000334] Mount-cache hash table entries: 256
[    0.000583] CPU: Physical Processor ID: 0
[    0.000680] CPU: Processor Core ID: 0
[    0.000778] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.000779] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001988] mce: CPU supports 9 MCE banks
[    0.002098] CPU0: Thermal monitoring enabled (TM1)
[    0.002206] using mwait in idle threads.
[    0.002347] ACPI: Core revision 20110623
[    0.011027] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.021124] CPU0: Intel(R) Core(TM) i7-4765T CPU @ 2.00GHz stepping 03
[    0.122339] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[    0.122600] ... version:                3
[    0.122697] ... bit width:              48
[    0.122794] ... generic registers:      4
[    0.122890] ... value mask:             0000ffffffffffff
[    0.122990] ... max period:             000000007fffffff
[    0.123089] ... fixed-purpose events:   3
[    0.123185] ... event mask:             000000070000000f
[    0.123394] Booting Node   0, Processors  #1
[    0.123469] smpboot cpu 1: start_ip = 98000
[    0.218514]  #2
[    0.218552] smpboot cpu 2: start_ip = 98000
[    0.313463]  #3
[    0.313500] smpboot cpu 3: start_ip = 98000
[    0.408411]  #4
[    0.408448] smpboot cpu 4: start_ip = 98000
[    0.504235]  #5
[    0.504273] smpboot cpu 5: start_ip = 98000
[    0.600181]  #6
[    0.600218] smpboot cpu 6: start_ip = 98000
[    0.696224]  #7 Ok.
[    0.696319] smpboot cpu 7: start_ip = 98000
[    0.792107] Brought up 8 CPUs
[    0.792203] Total of 8 processors activated (31980.08 BogoMIPS).
[    0.804671] PM: Registering ACPI NVS region at b987b000 (28672 bytes)
[    0.806440] PM: Registering ACPI NVS region at cc99b000 (4853760 bytes)
[    0.806684] xor: automatically using best checksumming function: generic_sse
[    0.810900]    generic_sse: 10260.000 MB/sec
[    0.810997] xor: using function: generic_sse (10260.000 MB/sec)
[    0.811142] NET: Registered protocol family 16
[    0.811517] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.811678] ACPI: bus type pci registered
[    0.811869] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.812036] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.815379] PCI: Using configuration type 1 for base access
[    0.819617] bio: create slab  at 0
[    0.835901] raid6: int64x1   2613 MB/s
[    0.852876] raid6: int64x2   2609 MB/s
[    0.869871] raid6: int64x4   2625 MB/s
[    0.886865] raid6: int64x8   2035 MB/s
[    0.903843] raid6: sse2x1    6187 MB/s
[    0.920834] raid6: sse2x2    7945 MB/s
[    0.937821] raid6: sse2x4    9285 MB/s
[    0.937917] raid6: using algorithm sse2x4 (9285 MB/s)
[    0.938026] ACPI: Added _OSI(Module Device)
[    0.938123] ACPI: Added _OSI(Processor Device)
[    0.938220] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.938319] ACPI: Added _OSI(Processor Aggregator Device)
[    0.940085] ACPI: EC: Look up EC in DSDT
[    0.941960] ACPI: Executed 1 blocks of module-level executable AML code
[    0.944449] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.944710] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[    0.945095] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.949946] ACPI: SSDT 00000000cc97cc18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.950597] ACPI: Dynamic OEM Table Load:
[    0.950758] ACPI: SSDT           (null) 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.955064] ACPI: SSDT 00000000cc97c618 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.955786] ACPI: Dynamic OEM Table Load:
[    0.955950] ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.959916] ACPI: SSDT 00000000cc97bd98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.960559] ACPI: Dynamic OEM Table Load:
[    0.960720] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.966042] ACPI: Interpreter enabled
[    0.966138] ACPI: (supports S0 S4 S5)
[    0.966347] ACPI: Using IOAPIC for interrupt routing
[    0.973846] ACPI: Power Resource [FN00] (off)
[    0.974036] ACPI: Power Resource [FN01] (off)
[    0.974223] ACPI: Power Resource [FN02] (off)
[    0.974408] ACPI: Power Resource [FN03] (off)
[    0.974593] ACPI: Power Resource [FN04] (off)
[    0.975401] ACPI: No dock devices found.
[    0.975500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.975943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.976447] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.976550] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.976652] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.976815] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.976976] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.977135] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.977294] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.977453] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.977612] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.977772] pci_root PNP0A08:00: host bridge window [mem 0xdf200000-0xfeafffff]
[    0.977945] pci 0000:00:00.0: [8086:0c00] type 0 class 0x000600
[    0.977982] pci 0000:00:01.0: [8086:0c01] type 1 class 0x000604
[    0.978016] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.978019] pci 0000:00:01.0: PME# disabled
[    0.978032] pci 0000:00:01.1: [8086:0c05] type 1 class 0x000604
[    0.978065] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.978067] pci 0000:00:01.1: PME# disabled
[    0.978083] pci 0000:00:02.0: [8086:0412] type 0 class 0x000300
[    0.978094] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.978101] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.978106] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    0.978138] pci 0000:00:03.0: [8086:0c0c] type 0 class 0x000403
[    0.978146] pci 0000:00:03.0: reg 10: [mem 0xf0734000-0xf0737fff 64bit]
[    0.978203] pci 0000:00:14.0: [8086:8c31] type 0 class 0x000c03
[    0.978222] pci 0000:00:14.0: reg 10: [mem 0xf0720000-0xf072ffff 64bit]
[    0.978282] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.978286] pci 0000:00:14.0: PME# disabled
[    0.978303] pci 0000:00:16.0: [8086:8c3a] type 0 class 0x000780
[    0.978322] pci 0000:00:16.0: reg 10: [mem 0xf073f000-0xf073f00f 64bit]
[    0.978386] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.978389] pci 0000:00:16.0: PME# disabled
[    0.978414] pci 0000:00:19.0: [8086:153b] type 0 class 0x000200
[    0.978431] pci 0000:00:19.0: reg 10: [mem 0xf0700000-0xf071ffff]
[    0.978439] pci 0000:00:19.0: reg 14: [mem 0xf073d000-0xf073dfff]
[    0.978447] pci 0000:00:19.0: reg 18: [io  0xf080-0xf09f]
[    0.978507] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.978511] pci 0000:00:19.0: PME# disabled
[    0.978532] pci 0000:00:1a.0: [8086:8c2d] type 0 class 0x000c03
[    0.978552] pci 0000:00:1a.0: reg 10: [mem 0xf073c000-0xf073c3ff]
[    0.978641] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.978644] pci 0000:00:1a.0: PME# disabled
[    0.978666] pci 0000:00:1b.0: [8086:8c20] type 0 class 0x000403
[    0.978680] pci 0000:00:1b.0: reg 10: [mem 0xf0730000-0xf0733fff 64bit]
[    0.978745] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.978748] pci 0000:00:1b.0: PME# disabled
[    0.978764] pci 0000:00:1c.0: [8086:8c10] type 1 class 0x000604
[    0.978831] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.978834] pci 0000:00:1c.0: PME# disabled
[    0.978854] pci 0000:00:1c.3: [8086:8c16] type 1 class 0x000604
[    0.978920] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.978923] pci 0000:00:1c.3: PME# disabled
[    0.978949] pci 0000:00:1d.0: [8086:8c26] type 0 class 0x000c03
[    0.978970] pci 0000:00:1d.0: reg 10: [mem 0xf073b000-0xf073b3ff]
[    0.979059] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.979062] pci 0000:00:1d.0: PME# disabled
[    0.979084] pci 0000:00:1f.0: [8086:8c44] type 0 class 0x000601
[    0.979202] pci 0000:00:1f.2: [8086:8c02] type 0 class 0x000106
[    0.979217] pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
[    0.979224] pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
[    0.979232] pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
[    0.979239] pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
[    0.979246] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    0.979253] pci 0000:00:1f.2: reg 24: [mem 0xf073a000-0xf073a7ff]
[    0.979290] pci 0000:00:1f.2: PME# supported from D3hot
[    0.979293] pci 0000:00:1f.2: PME# disabled
[    0.979306] pci 0000:00:1f.3: [8086:8c22] type 0 class 0x000c05
[    0.979320] pci 0000:00:1f.3: reg 10: [mem 0xf0739000-0xf07390ff 64bit]
[    0.979340] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    0.979408] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
[    0.979427] pci 0000:01:00.0: reg 10: [mem 0xf06c0000-0xf06dffff]
[    0.979442] pci 0000:01:00.0: reg 14: [mem 0xf0600000-0xf067ffff]
[    0.979456] pci 0000:01:00.0: reg 18: [io  0xe000-0xe01f]
[    0.979470] pci 0000:01:00.0: reg 1c: [mem 0xf06e0000-0xf06e3fff]
[    0.979509] pci 0000:01:00.0: reg 30: [mem 0xf0680000-0xf06bffff pref]
[    0.979583] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.979588] pci 0000:01:00.0: PME# disabled
[    0.980817] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.980918] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.980920] pci 0000:00:01.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.980957] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[    0.980972] pci 0000:02:00.0: reg 10: [mem 0xf0500000-0xf0501fff 64bit]
[    0.981044] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.981047] pci 0000:02:00.0: PME# disabled
[    0.982812] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[    0.982915] pci 0000:00:01.1:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.982953] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.983112] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.983128] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.983157] pci 0000:04:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit]
[    0.983176] pci 0000:04:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.983252] pci 0000:04:00.0: supports D1 D2
[    0.983254] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.983258] pci 0000:04:00.0: PME# disabled
[    0.984816] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.984918] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.984921] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.984938] pci_bus 0000:00: on NUMA node 0
[    0.984941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.985036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.985068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.985099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.985125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.985172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.985202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[    0.985307]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.985588]  pci0000:00: ACPI _OSC control (0x18) granted
[    0.991477] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.992173] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.992692] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.993213] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.993732] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.994253] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.994772] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.995294] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.995891] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.996057] vgaarb: loaded
[    0.996151] vgaarb: bridge control possible 0000:00:02.0
[    0.996392] SCSI subsystem initialized
[    0.996559] libata version 3.00 loaded.
[    0.996734] PCI: Using ACPI for IRQ routing
[    0.998246] PCI: pci_cache_line_size set to 64 bytes
[    0.998304] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.998306] reserve RAM buffer: 00000000b987b000 - 00000000bbffffff 
[    0.998308] reserve RAM buffer: 00000000b9cc8000 - 00000000bbffffff 
[    0.998310] reserve RAM buffer: 00000000cc782000 - 00000000cfffffff 
[    0.998313] reserve RAM buffer: 00000000ce000000 - 00000000cfffffff 
[    0.998315] reserve RAM buffer: 000000019fe00000 - 000000019fffffff 
[    0.998456] Switching to clocksource hpet
[    0.998650] pnp: PnP ACPI init
[    0.998753] ACPI: bus type pnp registered
[    0.999080] pnp 00:00: [bus 00-3e]
[    0.999082] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.999084] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.999085] pnp 00:00: [io  0x0d00-0xffff window]
[    0.999087] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.999089] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.999090] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.999092] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.999093] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.999095] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.999096] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.999098] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.999100] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.999102] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.999103] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.999105] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.999106] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.999108] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.999109] pnp 00:00: [mem 0xdf200000-0xfeafffff window]
[    0.999188] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.999210] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.999262] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.999366] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.999376] pnp 00:02: [io  0x0000-0x001f]
[    0.999378] pnp 00:02: [io  0x0081-0x0091]
[    0.999379] pnp 00:02: [io  0x0093-0x009f]
[    0.999380] pnp 00:02: [io  0x00c0-0x00df]
[    0.999382] pnp 00:02: [dma 4]
[    0.999419] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.999425] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.999460] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.999535] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.999573] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.999653] pnp 00:05: [io  0x002e-0x002f]
[    0.999655] pnp 00:05: [io  0x004e-0x004f]
[    0.999656] pnp 00:05: [io  0x0061]
[    0.999657] pnp 00:05: [io  0x0063]
[    0.999659] pnp 00:05: [io  0x0065]
[    0.999660] pnp 00:05: [io  0x0067]
[    0.999661] pnp 00:05: [io  0x0070]
[    0.999662] pnp 00:05: [io  0x0080]
[    0.999668] pnp 00:05: [io  0x0092]
[    0.999670] pnp 00:05: [io  0x00b2-0x00b3]
[    0.999671] pnp 00:05: [io  0x0680-0x069f]
[    0.999673] pnp 00:05: [io  0xffff]
[    0.999674] pnp 00:05: [io  0xffff]
[    0.999675] pnp 00:05: [io  0xffff]
[    0.999676] pnp 00:05: [io  0x1c00-0x1cfe]
[    0.999678] pnp 00:05: [io  0x1d00-0x1dfe]
[    0.999680] pnp 00:05: [io  0x1e00-0x1efe]
[    0.999681] pnp 00:05: [io  0x1f00-0x1ffe]
[    0.999682] pnp 00:05: [io  0x1800-0x18fe]
[    0.999684] pnp 00:05: [io  0x164e-0x164f]
[    0.999745] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.999846] system 00:05: [io  0xffff] has been reserved
[    0.999946] system 00:05: [io  0xffff] has been reserved
[    1.000046] system 00:05: [io  0xffff] has been reserved
[    1.000146] system 00:05: [io  0x1c00-0x1cfe] has been reserved
[    1.000248] system 00:05: [io  0x1d00-0x1dfe] has been reserved
[    1.000349] system 00:05: [io  0x1e00-0x1efe] has been reserved
[    1.000450] system 00:05: [io  0x1f00-0x1ffe] has been reserved
[    1.000551] system 00:05: [io  0x1800-0x18fe] has been reserved
[    1.000652] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.000760] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.000767] pnp 00:06: [io  0x0070-0x0077]
[    1.000773] pnp 00:06: [irq 8]
[    1.000810] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.000833] pnp 00:07: [io  0x1854-0x1857]
[    1.000883] system 00:07: [io  0x1854-0x1857] has been reserved
[    1.000985] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.001043] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    1.001044] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    1.001046] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    1.001048] pnp 00:08: [io  0x0290-0x029f]
[    1.001098] system 00:08: [io  0x0290-0x029f] has been reserved
[    1.001200] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.001220] pnp 00:09: [io  0x0010-0x001f]
[    1.001221] pnp 00:09: [io  0x0022-0x003f]
[    1.001223] pnp 00:09: [io  0x0044-0x005f]
[    1.001224] pnp 00:09: [io  0x0062-0x0063]
[    1.001226] pnp 00:09: [io  0x0065-0x006f]
[    1.001227] pnp 00:09: [io  0x0072-0x007f]
[    1.001228] pnp 00:09: [io  0x0080]
[    1.001230] pnp 00:09: [io  0x0084-0x0086]
[    1.001231] pnp 00:09: [io  0x0088]
[    1.001232] pnp 00:09: [io  0x008c-0x008e]
[    1.001233] pnp 00:09: [io  0x0090-0x009f]
[    1.001235] pnp 00:09: [io  0x00a2-0x00bf]
[    1.001236] pnp 00:09: [io  0x00e0-0x00ef]
[    1.001237] pnp 00:09: [io  0x04d0-0x04d1]
[    1.001292] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    1.001394] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.001401] pnp 00:0a: [io  0x00f0-0x00ff]
[    1.001405] pnp 00:0a: [irq 13]
[    1.001443] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.001824] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    1.001826] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[    1.001828] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    1.001829] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    1.001831] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    1.001832] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    1.001834] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[    1.001835] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    1.001836] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    1.001838] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    1.001839] pnp 00:0b: [mem 0xf7fef000-0xf7feffff]
[    1.001841] pnp 00:0b: [mem 0xf7ff0000-0xf7ff0fff]
[    1.001911] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.002014] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.002116] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.002218] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.002321] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.002423] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.002527] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.002630] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.002739] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    1.002842] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.002945] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
[    1.003048] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    1.003151] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.003395] pnp: PnP ACPI: found 12 devices
[    1.003492] ACPI: ACPI bus type pnp unregistered
[    1.010620] PCI: max bus depth: 1 pci_try_num: 2
[    1.010644] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.010752] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.010854] pci 0000:00:01.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    1.010960] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[    1.011061] pci 0000:00:01.1:   bridge window [mem 0xf0500000-0xf05fffff]
[    1.011166] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    1.011274] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.011374] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    1.011478] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    1.011594] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.011704] pci 0000:00:01.0: setting latency timer to 64
[    1.011708] pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.011811] pci 0000:00:01.1: setting latency timer to 64
[    1.011816] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.011919] pci 0000:00:1c.0: setting latency timer to 64
[    1.011927] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.012031] pci 0000:00:1c.3: setting latency timer to 64
[    1.012034] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.012036] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.012037] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.012039] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.012041] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.012042] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.012044] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.012046] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.012047] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.012049] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[    1.012051] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.012052] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    1.012054] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    1.012056] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    1.012058] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf04fffff]
[    1.012143] NET: Registered protocol family 2
[    1.012302] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.012748] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.013392] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.013623] TCP: Hash tables configured (established 262144 bind 65536)
[    1.013732] TCP reno registered
[    1.013828] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.013948] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.014132] NET: Registered protocol family 1
[    1.014321] RPC: Registered named UNIX socket transport module.
[    1.014422] RPC: Registered udp transport module.
[    1.014520] RPC: Registered tcp transport module.
[    1.014617] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.014734] pci 0000:00:02.0: Boot video device
[    1.014746] pci 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.014874] pci 0000:00:14.0: PCI INT A disabled
[    1.014980] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.029674] pci 0000:00:1a.0: PCI INT A disabled
[    1.029786] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.044664] pci 0000:00:1d.0: PCI INT A disabled
[    1.044777] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.044899] pci 0000:02:00.0: PCI INT A disabled
[    1.045001] PCI: CLS 64 bytes, default 64
[    1.045040] Trying to unpack rootfs image as initramfs...
[    1.045240] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    1.052360] Freeing initrd memory: 5740k freed
[    1.053043] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.053146] Placing 64MB software IO TLB between ffff8800c8780000 - ffff8800cc780000
[    1.053306] software IO TLB at phys 0xc8780000 - 0xcc780000
[    1.055750] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    1.062991] VFS: Disk quotas dquot_6.5.2
[    1.063121] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.063655] msgmni has been set to 11311
[    1.063940] async_tx: api initialized (async)
[    1.064089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.064248] io scheduler noop registered
[    1.064371] io scheduler cfq registered (default)
[    1.066210] pcieport 0000:00:01.0: setting latency timer to 64
[    1.066236] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.066292] pcieport 0000:00:01.1: setting latency timer to 64
[    1.066312] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    1.082341] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.148990] brd: module loaded
[    1.149190] Loading iSCSI transport class v2.0-870.
[    1.149637] rdac: device handler registered
[    1.149841] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.150004] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0
[    1.150276] iscsi: registered transport (qla4xxx)
[    1.150406] QLogic iSCSI HBA Driver
[    1.150533] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[    1.150677] mpt2sas version 11.100.00.00 loaded
[    1.150843] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.150976] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.151167] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    1.151358] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    1.151540] VMware PVSCSI driver - version 1.0.1.0-k
[    1.151790] ahci 0000:00:1f.2: version 3.0
[    1.151799] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.151935] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.151974] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.152136] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.152297] ahci 0000:00:1f.2: setting latency timer to 64
[    1.153021] scsi0 : ahci
[    1.153244] scsi1 : ahci
[    1.153429] scsi2 : ahci
[    1.153613] scsi3 : ahci
[    1.153795] scsi4 : ahci
[    1.153974] scsi5 : ahci
[    1.154456] ata1: SATA max UDMA/133 abar m2048@0xf073a000 port 0xf073a100 irq 42
[    1.154621] ata2: DUMMY
[    1.154715] ata3: DUMMY
[    1.154808] ata4: DUMMY
[    1.154901] ata5: DUMMY
[    1.154994] ata6: DUMMY
[    1.155087] Enable Synology sata fast booting
[    1.459458] ata2: send port disabled event
[    1.459484] ata3: send port disabled event
[    1.459518] ata4: send port disabled event
[    1.459542] ata5: send port disabled event
[    1.459570] ata6: send port disabled event
[    1.460140] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    1.460307] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    1.460417] Copyright (c) 2007 Atheros Corporation.
[    1.460636] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[    1.460812] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25)
[    1.461067] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.461168] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.461303] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.461413] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.461551] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[    1.461654] Copyright (c) 2007-2011 Intel Corporation.
[    1.461786] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    1.461949] sky2: driver version 1.30
[    1.462146] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
[    1.462465] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
[    1.462780] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.465045] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.465147] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.465299] rtc_cmos 00:06: RTC can wake from S4
[    1.465522] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.465647] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.465778] i2c /dev entries driver
[    1.466075] md: linear personality registered for level -1
[    1.466176] md: raid0 personality registered for level 0
[    1.466276] md: raid1 personality registered for level 1
[    1.466376] md: raid10 personality registered for level 10
[    1.466486] md: raid6 personality registered for level 6
[    1.466586] md: raid5 personality registered for level 5
[    1.466685] md: raid4 personality registered for level 4
[    1.466901] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.467078] cpuidle: using governor ladder
[    1.467175] cpuidle: using governor menu
[    1.467416] TCP cubic registered
[    1.467511] NET: Registered protocol family 17
[    1.468125] rtc_cmos 00:06: setting system clock to 2013-07-10 16:49:26 UTC (1373474966)
[    1.764250] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.765707] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.765968] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88019949b600), AE_NOT_FOUND (20110623/psparse-536)
[    1.793641] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[    1.793742] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.808340] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.808598] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88019949b600), AE_NOT_FOUND (20110623/psparse-536)
[    1.836234] ata1.00: configured for UDMA/133
[    1.836434] scsi 0:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
[    1.836761] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.837017] sd 0:0:0:0: [sda] Write Protect is off
[    1.837117] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.837138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.859700]  sda: sda1 sda2
[    1.860027] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.860137] md: Waiting for all devices to be available before autodetect
[    1.860254] md: If you don't use raid, use raid=noautodetect
[    1.860474] md: Autodetecting RAID arrays.
[    1.889997] md: Scanned 2 and added 2 devices.
[    1.890095] md: autorun ...
[    1.890192] md: considering sda1 ...
[    1.890291] md:  adding sda1 ...
[    1.890387] md: sda2 has different UUID to sda1
[    1.890487] md: created md0
[    1.890581] md: bind
[    1.890682] md: running: 
[    1.890900] bio: create slab  at 1
[    1.891041] md/raid1:md0: active with 1 out of 12 mirrors
[    1.891165] md0: detected capacity change from 0 to 2549940224
[    1.891295] md: considering sda2 ...
[    1.891393] md:  adding sda2 ...
[    1.891592] md: created md1
[    1.891686] md: bind
[    1.891786] md: running: 
[    1.892034] md/raid1:md1: active with 1 out of 12 mirrors
[    1.892157] md1: detected capacity change from 0 to 2147418112
[    1.892287] md: ... autorun DONE.
[    1.892973]  md1: unknown partition table
[    1.893692] RAMDISK: gzip image found at block 0
[    2.040128] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    2.045427] e1000e: Intel(R) PRO/1000 Network Driver - 2.4.14-NAPI
[    2.045530] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    2.045664] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.045775] e1000e 0000:00:19.0: setting latency timer to 64
[    2.045833] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.046023] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[    2.055065] Refined TSC clocksource calibration: 1998.841 MHz.
[    2.055169] Switching to clocksource tsc
[    2.234385] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 74:d0:2b:2c:a6:bf
[    2.234548] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.234675] e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    2.234788] e1000e 0000:01:00.0: Disabling ASPM L0s L1
[    2.234896] e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.235016] e1000e 0000:01:00.0: setting latency timer to 64
[    2.235091] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.235318] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
[    2.235322] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    2.235326] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
[    2.360602] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:18:98:38
[    2.360772] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
[    2.360892] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-008
[    2.363498] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
[    2.363615] r8168 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.363734] r8168 0000:04:00.0: setting latency timer to 64
[    2.363793] r8168 0000:04:00.0: irq 47 for MSI/MSI-X
[    2.364886] eth%d: 0xffffc90000032000, 64:70:02:01:d5:63, IRQ 47
[    2.365367] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    2.365545] r8168  Copyright (C) 2013  Realtek NIC software team 
[    2.365547]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
[    2.365548]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
[    2.366740] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    2.366844] Disabling lock debugging due to kernel taint
[    2.367263] synobios: load, major number 201
[    2.367364] Brand: Synology
[    2.367523] Model: DS-3612xs
[    2.367652] set group disks wakeup number to 4, spinup time deno 7
[    2.371959] synobios: unload
[    2.383037]  md0: unknown partition table
[    2.678348] EXT4-fs (md0): barriers disabled
[    2.686086] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[    2.770565] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[    5.670023] synobios: load, major number 201
[    5.670124] Brand: Synology
[    5.670283] Model: DS-3612xs
[    5.670410] set group disks wakeup number to 4, spinup time deno 7
[    5.673370] synobios: unload
[    9.490044] synoacl module [synoacl_ext4] is not loaded 
[    9.490147] synoacl module [synoacl_vfs] is not loaded 
[    9.519018] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
[    9.566438] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[    9.566606] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[    9.566710] Trying to move old root to /initrd ... okay
[    9.581476] Freeing unused kernel memory: 428k freed
[    9.581616] Write protecting the kernel read-only data: 8192k
[    9.585395] Freeing unused kernel memory: 1388k freed
[    9.586177] Freeing unused kernel memory: 196k freed
[    9.689116] EXT4-fs (md0): re-mounted. Opts: (null)

Link to comment
Share on other sites

here a new log, 3ware controller are found but the same fail.

 

The System is a ASUS e45m1-m pro, 2gb ddr3, boot by USB-stick, System HDD: Onboard SATA-Controller with 32GB SSD DISK, 3ware Controlle see post's before.

 

insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/aesni-intel.ko': No such device
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
insmod: can't insert '/lib/modules/synobios.ko': File exists
Jul 10 17:56:53 syslogd started: BusyBox v1.16.1
Jul 10 17:56:53 kernel: [    1.421336] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 10 17:56:53 kernel: [    1.498877] 3ware Storage Controller device driver for Linux v1.26.02.003.
Jul 10 17:56:53 kernel: [    1.499165] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Jul 10 17:56:53 kernel: [    1.704296] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.
Jul 10 17:56:53 kernel: [    2.010237] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.
Jul 10 17:56:53 kernel: [    2.035023] Enable Synology sata fast booting
Jul 10 17:56:53 kernel: [    4.328620] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
Jul 10 17:56:53 kernel: [    4.335445] md: sdb2 has different UUID to sdb1
Jul 10 17:56:53 kernel: [    4.644826] r8168  Copyright (C) 2013  Realtek NIC software team 
Jul 10 17:56:53 kernel: [    4.644829]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
Jul 10 17:56:53 kernel: [    4.644832]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
Jul 10 17:56:53 kernel: [    4.648720] bromolow_synobios: module license 'Synology Inc.' taints kernel.
Jul 10 17:56:53 kernel: [    4.648886] Disabling lock debugging due to kernel taint
Jul 10 17:56:53 kernel: [    4.651722] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
Jul 10 17:56:53 kernel: [    4.652006] IP: [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 17:56:53 kernel: [    4.652006] PGD 678bc067 PUD 678bd067 PMD 0 
Jul 10 17:56:53 kernel: [    4.652006] Oops: 0000 [#1] SMP 
Jul 10 17:56:53 kernel: [    4.652006] CPU 0 
Jul 10 17:56:53 kernel: [    4.652006] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
Jul 10 17:56:53 kernel: [    4.652006] 
Jul 10 17:56:53 kernel: [    4.652006] Pid: 1262, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
Jul 10 17:56:53 kernel: [    4.652006] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 17:56:53 kernel: [    4.652006] RSP: 0018:ffff88006ae67d48  EFLAGS: 00010286
Jul 10 17:56:53 kernel: [    4.652006] RAX: 0000000000000000 RBX: ffff88006ae67d58 RCX: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006ae67d58
Jul 10 17:56:53 kernel: [    4.652006] RBP: ffff88006b37c000 R08: ffffffff81921c60 R09: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] R10: ffff88006ac49200 R11: 0000000000000016 R12: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
Jul 10 17:56:53 kernel: [    4.652006] FS:  0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jul 10 17:56:53 kernel: [    4.652006] CR2: 0000000000000068 CR3: 00000000678bf000 CR4: 00000000000006f0
Jul 10 17:56:53 kernel: [    4.652006] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul 10 17:56:53 kernel: [    4.652006] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul 10 17:56:53 kernel: [    4.652006] Process insmod (pid: 1262, threadinfo ffff88006ae66000, task ffff88006dd60250)
Jul 10 17:56:53 kernel: [    4.652006] Stack:
Jul 10 17:56:53 kernel: [    4.652006]  ffff88006b37c000 ffffffff812077f8 0000000000000000 ffffffffa009f720
Jul 10 17:56:53 kernel: [    4.652006]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
Jul 10 17:56:53 kernel: [    4.652006]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
Jul 10 17:56:53 kernel: [    4.652006] Call Trace:
Jul 10 17:56:53 kernel: [    4.652006]  [] ? scsi_host_lookup+0x46/0x4e
Jul 10 17:56:53 kernel: [    4.652006]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
Jul 10 17:56:53 kernel: [    4.652006]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
Jul 10 17:56:53 kernel: [    4.652006]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
Jul 10 17:56:53 kernel: [    4.652006]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
Jul 10 17:56:53 kernel: [    4.652006]  [] ? do_one_initcall+0x79/0x127
Jul 10 17:56:53 kernel: [    4.652006]  [] ? sys_init_module+0x104a/0x11ef
Jul 10 17:56:53 kernel: [    4.652006]  [] ? fput+0x175/0x196
Jul 10 17:56:53 kernel: [    4.652006]  [] ? filp_close+0x64/0x6c
Jul 10 17:56:53 kernel: [    4.652006]  [] ? system_call_fastpath+0x16/0x1b
Jul 10 17:56:53 kernel: [    4.652006] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
Jul 10 17:56:53 kernel: [    4.652006] RIP  [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 17:56:53 kernel: [    4.652006]  RSP 
Jul 10 17:56:53 kernel: [    4.652006] CR2: 0000000000000068
Jul 10 17:56:53 kernel: [    4.662237] ---[ end trace 16b7282d3ce12da0 ]---
Jul 10 17:56:53 kernel: [    5.083628] synoacl module [synoacl_ext4] is not loaded 
Jul 10 17:56:53 kernel: [    5.083787] synoacl module [synoacl_vfs] is not loaded 
Jul 10 17:56:53 kernel: [    5.096800] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
Jul 10 17:56:53 kernel: [    6.068166] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0)
Jul 10 17:56:53 kernel: [    6.094674] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel)
Jul 10 17:56:53 kernel: [    6.128799] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel)
Jul 10 17:56:53 kernel: [    6.138799] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel)
Jul 10 17:56:53 kernel: [    6.147489] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel)
Jul 10 17:56:53 kernel: [    6.156795] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel)
Jul 10 17:56:53 kernel: [    6.165814] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel)
Jul 10 17:56:53 kernel: [    6.174378] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel)
Jul 10 17:56:53 kernel: [    6.184562] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel)
Jul 10 17:56:53 kernel: [    6.194361] cryptomgr: exports duplicate symbol alg_test (owned by kernel)
Jul 10 17:56:53 kernel: [    6.212647] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel)
Jul 10 17:56:53 kernel: [    6.223291] rng: exports duplicate symbol crypto_default_rng (owned by kernel)
Jul 10 17:56:53 kernel: [    6.274336] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel)
Jul 10 17:56:53 kernel: [    6.289368] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel)
Jul 10 17:56:53 kernel: [    6.319686] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel)
Jul 10 17:56:53 kernel: [    6.373686] libcrc32c: exports duplicate symbol crc32c (owned by kernel)
Jul 10 17:56:53 kernel: [    6.383803] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel)
Jul 10 17:56:53 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul 10 17:56:53 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: scemd.c:127 open /dev/synobios error!
Jul 10 17:56:58 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used.
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul 10 17:56:58 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:56:58 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set
Jul 10 17:56:58 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul 10 17:56:58 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul 10 17:56:58 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul 10 17:56:58 scemd: external_microp_id_check.c:44 Fail to open synobios
platform error
Jul 10 17:56:58 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 17:56:59 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory
Jul 10 17:56:59 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd
Jul 10 17:56:59 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul 10 17:56:59 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul 10 17:56:59 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Jul 10 17:56:59 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul 10 17:56:59 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul 10 17:56:59 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul 10 17:56:59 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd
Jul 10 17:56:59 synousbdisk: RCClean succeeded
Jul 10 17:56:59 synosata: synosata.c:152 no external sata devices granted
Jul 10 17:57:00 synoexternal: write to uart2 error, error=(5)Input/output error
killall: synolunbkp: no process killed
Jul 10 17:57:01 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul 10 17:57:01 kernel: [   14.833889] Got empty serial number. Generate serial number from product.
Jul 10 17:57:02 synoexternal: write to uart2 error, error=(5)Input/output error
Jul 10 17:57:03 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab
Jul 10 17:57:04 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Jul 10 17:57:04 avahi-daemon[6656]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record
Jul 10 17:57:04 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul 10 17:57:04 hotplugd: ##### ACTION:add
Jul 10 17:57:04 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul 10 17:57:04 hotplugd: DEVPATH:usb1
Jul 10 17:57:04 hotplugd: SUBSYSTEM:usb
Jul 10 17:57:05 kernel: [   19.227630] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:57:05 kernel: [   19.227754] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:57:05 kernel: [   19.234518] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:57:05 kernel: [   19.234670] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:57:06 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber.
Jul 10 17:57:06 kernel: [   19.630483] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:57:06 kernel: [   19.630615] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:57:06 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000)
Jul 10 17:57:06 syslogd exiting
insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/aesni-intel.ko': No such device
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
insmod: can't insert '/lib/modules/synobios.ko': File exists
Jul 10 17:59:02 syslogd started: BusyBox v1.16.1
Jul 10 17:59:02 kernel: [    6.102917] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0)
Jul 10 17:59:02 kernel: [    6.128582] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel)
Jul 10 17:59:02 kernel: [    6.160115] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel)
Jul 10 17:59:02 kernel: [    6.170948] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel)
Jul 10 17:59:02 kernel: [    6.179608] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel)
Jul 10 17:59:02 kernel: [    6.189816] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel)
Jul 10 17:59:02 kernel: [    6.201858] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel)
Jul 10 17:59:02 kernel: [    6.211766] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel)
Jul 10 17:59:02 kernel: [    6.220595] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel)
Jul 10 17:59:02 kernel: [    6.230363] cryptomgr: exports duplicate symbol alg_test (owned by kernel)
Jul 10 17:59:02 kernel: [    6.249399] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel)
Jul 10 17:59:02 kernel: [    6.259379] rng: exports duplicate symbol crypto_default_rng (owned by kernel)
Jul 10 17:59:02 kernel: [    6.310305] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel)
Jul 10 17:59:02 kernel: [    6.326304] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel)
Jul 10 17:59:02 kernel: [    6.357446] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel)
Jul 10 17:59:02 kernel: [    6.412183] libcrc32c: exports duplicate symbol crc32c (owned by kernel)
Jul 10 17:59:02 kernel: [    6.421773] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel)
Jul 10 17:59:02 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul 10 17:59:02 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: scemd.c:127 open /dev/synobios error!
Jul 10 17:59:07 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used.
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul 10 17:59:07 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 17:59:07 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set
Jul 10 17:59:07 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul 10 17:59:07 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul 10 17:59:07 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:07 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:07 scemd: smartctl_enable.c:92 AtaSmartEnable failed.
Jul 10 17:59:07 scemd: SmartDataRead(107) enable smart /dev/sda fail
Jul 10 17:59:07 scemd: disk_temperature_get.c:71 read value /dev/sda fail
Jul 10 17:59:07 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul 10 17:59:07 scemd: external_microp_id_check.c:44 Fail to open synobios
platform error
Jul 10 17:59:07 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 17:59:08 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory
Jul 10 17:59:08 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd
Jul 10 17:59:08 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul 10 17:59:08 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul 10 17:59:08 kernel: [   12.611226] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1.
Jul 10 17:59:08 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Jul 10 17:59:08 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul 10 17:59:08 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 synocheckvolume: smartctl_enable.c:92 AtaSmartEnable failed.
Jul 10 17:59:08 synocheckvolume: SmartDataRead(107) enable smart /dev/sda fail
Jul 10 17:59:08 synocheckvolume: disk_temperature_get.c:71 read value /dev/sda fail
Jul 10 17:59:08 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul 10 17:59:08 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd
Jul 10 17:59:08 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 17:59:08 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul 10 17:59:08 synousbdisk: RCClean succeeded
Jul 10 17:59:08 synosata: synosata.c:152 no external sata devices granted
Jul 10 17:59:09 synoexternal: write to uart2 error, error=(5)Input/output error
killall: synolunbkp: no process killed
Jul 10 17:59:10 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul 10 17:59:10 kernel: [   14.885289] Got empty serial number. Generate serial number from product.
Jul 10 17:59:11 synoexternal: write to uart2 error, error=(5)Input/output error
Jul 10 17:59:12 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab
Jul 10 17:59:13 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Jul 10 17:59:13 avahi-daemon[6678]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record
Jul 10 17:59:13 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul 10 17:59:13 hotplugd: ##### ACTION:add
Jul 10 17:59:13 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul 10 17:59:13 hotplugd: DEVPATH:usb1
Jul 10 17:59:13 hotplugd: SUBSYSTEM:usb
Jul 10 17:59:14 kernel: [   19.250124] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:59:14 kernel: [   19.250246] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:59:14 kernel: [   19.257165] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:59:14 kernel: [   19.257300] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:59:15 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber.
Jul 10 17:59:15 kernel: [   19.653629] sd 8:0:0:0: [sdu] No Caching mode page present
Jul 10 17:59:15 kernel: [   19.653760] sd 8:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 17:59:15 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000)
Jul 10 17:59:15 syslogd exiting

 

I hope this helps.

 

It's appear that ubuntu use the exact same driver but as module and not built-in the kernel.

I see in message log when you put your card in : insmod: can't insert '/lib/modules/synobios.ko': File exists

this is why the system is shutdowning/restarting but why :sad:

Did your machine boot ok the first time (no dsm installed) with your controller card plug-in without no disk on it ?

 

@interested : any issue to report ?

 

Like we see in logs, there are lot of crypts errors... I will look to fix all of these shortly

Link to comment
Share on other sites

OK, I clean the disk and make all new. I Test install the system with installed controller (4 HDD's on the controller).System HDD ist on the onboard controller first port. Boot from Stick ok, Synology assistant found the device, install from system ok. next the system reboot to install the config it boot and when its finish it make a reboot. The config can not be installed.

 

This is the log from the system.

I hope the log has more information.

 

:?: Jul 10 10:59:23 kernel: [ 20.921655] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1.

 

insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/mdio.ko': invalid module format
insmod: can't insert '/lib/modules/crypto.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format
insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format
insmod: can't insert '/lib/modules/aead.ko': invalid module format
insmod: can't insert '/lib/modules/pcompress.ko': invalid module format
insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format
insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format
insmod: can't insert '/lib/modules/rng.ko': invalid module format
insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format
insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format
insmod: can't insert '/lib/modules/cryptd.ko': invalid module format
insmod: can't insert '/lib/modules/aesni-intel.ko': No such device
insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format
insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format
insmod: can't insert '/lib/modules/synobios.ko': File exists
Jul 10 10:59:17 syslogd started: BusyBox v1.16.1
Jul 10 10:59:17 kernel: [    1.420879] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 10 10:59:17 kernel: [    1.502957] 3ware Storage Controller device driver for Linux v1.26.02.003.
Jul 10 10:59:17 kernel: [    1.503292] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Jul 10 10:59:17 kernel: [    1.760251] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.
Jul 10 10:59:17 kernel: [    2.066240] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.
Jul 10 10:59:17 kernel: [    2.091971] Enable Synology sata fast booting
Jul 10 10:59:17 kernel: [    4.386680] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
Jul 10 10:59:17 kernel: [    4.415659] md: sdb2 has different UUID to sdb1
Jul 10 10:59:17 kernel: [    4.729732] r8168  Copyright (C) 2013  Realtek NIC software team 
Jul 10 10:59:17 kernel: [    4.729735]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
Jul 10 10:59:17 kernel: [    4.729737]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
Jul 10 10:59:17 kernel: [    4.734415] bromolow_synobios: module license 'Synology Inc.' taints kernel.
Jul 10 10:59:17 kernel: [    4.734583] Disabling lock debugging due to kernel taint
Jul 10 10:59:17 kernel: [    4.737155] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
Jul 10 10:59:17 kernel: [    4.737469] IP: [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 10:59:17 kernel: [    4.737662] PGD 6b1cb067 PUD 6b1ca067 PMD 0 
Jul 10 10:59:17 kernel: [    4.737931] Oops: 0000 [#1] SMP 
Jul 10 10:59:17 kernel: [    4.738005] CPU 0 
Jul 10 10:59:17 kernel: [    4.738005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
Jul 10 10:59:17 kernel: [    4.738005] 
Jul 10 10:59:17 kernel: [    4.738005] Pid: 1273, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
Jul 10 10:59:17 kernel: [    4.738005] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 10:59:17 kernel: [    4.738005] RSP: 0018:ffff88006dfbbd48  EFLAGS: 00010286
Jul 10 10:59:17 kernel: [    4.738005] RAX: 0000000000000000 RBX: ffff88006dfbbd58 RCX: 0000000000000000
Jul 10 10:59:17 kernel: [    4.738005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006dfbbd58
Jul 10 10:59:17 kernel: [    4.738005] RBP: ffff88006ac68000 R08: ffffffff81921c60 R09: 0000000000000000
Jul 10 10:59:17 kernel: [    4.738005] R10: ffff88006b3fa400 R11: 0000000000000016 R12: 0000000000000000
Jul 10 10:59:17 kernel: [    4.738005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
Jul 10 10:59:17 kernel: [    4.738005] FS:  0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000
Jul 10 10:59:17 kernel: [    4.738005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jul 10 10:59:17 kernel: [    4.738005] CR2: 0000000000000068 CR3: 000000006b1ce000 CR4: 00000000000006f0
Jul 10 10:59:17 kernel: [    4.738005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul 10 10:59:17 kernel: [    4.738005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul 10 10:59:17 kernel: [    4.738005] Process insmod (pid: 1273, threadinfo ffff88006dfba000, task ffff88006b3b77d0)
Jul 10 10:59:17 kernel: [    4.738005] Stack:
Jul 10 10:59:17 kernel: [    4.738005]  ffff88006ac68000 ffffffff812077f8 0000000000000000 ffffffffa009f720
Jul 10 10:59:17 kernel: [    4.738005]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
Jul 10 10:59:17 kernel: [    4.738005]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
Jul 10 10:59:17 kernel: [    4.738005] Call Trace:
Jul 10 10:59:17 kernel: [    4.738005]  [] ? scsi_host_lookup+0x46/0x4e
Jul 10 10:59:17 kernel: [    4.738005]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
Jul 10 10:59:17 kernel: [    4.738005]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
Jul 10 10:59:17 kernel: [    4.738005]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
Jul 10 10:59:17 kernel: [    4.738005]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
Jul 10 10:59:17 kernel: [    4.738005]  [] ? do_one_initcall+0x79/0x127
Jul 10 10:59:17 kernel: [    4.738005]  [] ? sys_init_module+0x104a/0x11ef
Jul 10 10:59:17 kernel: [    4.738005]  [] ? fput+0x175/0x196
Jul 10 10:59:17 kernel: [    4.738005]  [] ? filp_close+0x64/0x6c
Jul 10 10:59:17 kernel: [    4.738005]  [] ? system_call_fastpath+0x16/0x1b
Jul 10 10:59:17 kernel: [    4.738005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
Jul 10 10:59:17 kernel: [    4.738005] RIP  [] syno_libata_index_get_by_map+0x36/0x83
Jul 10 10:59:17 kernel: [    4.738005]  RSP 
Jul 10 10:59:17 kernel: [    4.738005] CR2: 0000000000000068
Jul 10 10:59:17 kernel: [    4.747597] ---[ end trace 454336d2c682554a ]---
Jul 10 10:59:17 kernel: [   12.389781] synoacl module [synoacl_ext4] is not loaded 
Jul 10 10:59:17 kernel: [   12.389950] synoacl module [synoacl_vfs] is not loaded 
Jul 10 10:59:17 kernel: [   12.410534] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
Jul 10 10:59:17 kernel: [   13.481348] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0)
Jul 10 10:59:17 kernel: [   13.506307] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel)
Jul 10 10:59:17 kernel: [   13.543957] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel)
Jul 10 10:59:17 kernel: [   13.552753] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel)
Jul 10 10:59:17 kernel: [   13.564300] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel)
Jul 10 10:59:17 kernel: [   13.573973] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel)
Jul 10 10:59:17 kernel: [   13.581829] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel)
Jul 10 10:59:17 kernel: [   13.591797] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel)
Jul 10 10:59:17 kernel: [   13.600329] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel)
Jul 10 10:59:17 kernel: [   13.609673] cryptomgr: exports duplicate symbol alg_test (owned by kernel)
Jul 10 10:59:17 kernel: [   13.629393] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel)
Jul 10 10:59:17 kernel: [   13.639387] rng: exports duplicate symbol crypto_default_rng (owned by kernel)
Jul 10 10:59:17 kernel: [   13.689386] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel)
Jul 10 10:59:17 kernel: [   13.704330] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel)
Jul 10 10:59:17 kernel: [   13.734686] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel)
Jul 10 10:59:17 kernel: [   13.789682] libcrc32c: exports duplicate symbol crc32c (owned by kernel)
Jul 10 10:59:17 kernel: [   13.798661] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel)
Jul 10 10:59:17 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab
Jul 10 10:59:17 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(706): value=[cups] and default value=[cups] not matched
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(706): value=[cups] and default value=[cups] not matched
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [printcap name=cups]
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [winbind enum groups=yes]
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [realm=*]
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [passdb backend=smbpasswd]
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [printing=cups]
Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [winbind enum users=yes]
Jul 10 10:59:18 synologset1: SYNOLogChangeSize : logfile /var/log/synosys.log not existed
Jul 10 10:59:21 dhcpcd[3740]: dhcpReboot: do not want cache
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: scemd.c:127 open /dev/synobios error!
Jul 10 10:59:23 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used.
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 
Jul 10 10:59:23 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 
Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios
Jul 10 10:59:23 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set
Jul 10 10:59:23 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Jul 10 10:59:23 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Jul 10 10:59:23 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 10:59:23 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 10:59:23 scemd: smartctl_enable.c:92 AtaSmartEnable failed.
Jul 10 10:59:23 scemd: SmartDataRead(107) enable smart /dev/sda fail
Jul 10 10:59:23 scemd: disk_temperature_get.c:71 read value /dev/sda fail
Jul 10 10:59:23 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Jul 10 10:59:23 scemd: external_microp_id_check.c:44 Fail to open synobios
platform error
Jul 10 10:59:23 scemd: write to uart2 error, error=(5)Input/output error
Jul 10 10:59:23 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory
Jul 10 10:59:23 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd
Jul 10 10:59:23 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56]
Jul 10 10:59:23 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory
Jul 10 10:59:23 kernel: [   20.921655] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1.
Jul 10 10:59:23 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Jul 10 10:59:23 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Jul 10 10:59:23 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 10:59:23 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 10:59:23 synocheckvolume: smartctl_enable.c:92 AtaSmartEnable failed.
Jul 10 10:59:23 synocheckvolume: SmartDataRead(107) enable smart /dev/sda fail
Jul 10 10:59:23 synocheckvolume: disk_temperature_get.c:71 read value /dev/sda fail
Jul 10 10:59:24 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd
Jul 10 10:59:24 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 10:59:24 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error 
Jul 10 10:59:24 manutild: manutild.c:5296 Fail to get external sata devices
Jul 10 10:59:24 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Jul 10 10:59:24 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] 
Jul 10 10:59:24 synousbdisk: RCClean succeeded
Jul 10 10:59:24 synosata: synosata.c:152 no external sata devices granted
Jul 10 10:59:24 synoexternal: write to uart2 error, error=(5)Input/output error
killall: synolunbkp: no process killed
Jul 10 10:59:26 ddnsd: main(ddnsd.c:3006):  not enable DDNS, shutdown daemon
Jul 10 10:59:26 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2
Jul 10 10:59:26 hotplugd: ##### ACTION:add
Jul 10 10:59:26 hotplugd: DEVICE:/proc/bus/usb/001/001
Jul 10 10:59:26 hotplugd: DEVPATH:usb1
Jul 10 10:59:26 hotplugd: SUBSYSTEM:usb
Jul 10 10:59:27 synoexternal: write to uart2 error, error=(5)Input/output error
Jul 10 10:59:27 kernel: [   25.310420] sd 7:0:0:0: [sdu] No Caching mode page present
Jul 10 10:59:27 kernel: [   25.310543] sd 7:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 10:59:27 kernel: [   25.322930] sd 7:0:0:0: [sdu] No Caching mode page present
Jul 10 10:59:27 kernel: [   25.323101] sd 7:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 10:59:28 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Jul 10 10:59:28 kernel: [   25.716646] sd 7:0:0:0: [sdu] No Caching mode page present
Jul 10 10:59:28 kernel: [   25.716783] sd 7:0:0:0: [sdu] Assuming drive cache: write through
Jul 10 10:59:29 kernel: [   26.668128] Got empty serial number. Generate serial number from product.
Jul 10 10:59:29 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber.
Jul 10 10:59:29 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000)
Jul 10 10:59:29 syslogd exiting

 

I had also tested to install the system on the 3ware HDD but the install crash with a error. (onboard are disabled)

Link to comment
Share on other sites

@interested : any issue to report ?

 

- if I open Package Center and check the "Available" tab, I get an error message saying "Connection failed. Please check your network settings.".

 

I don`t have this problem with 4.2.3202 & 4.2.3211 - so I must manually install Package

 

- in Stationdownload, under settings, tab BT Search - I dont see any search engine plugin , if I want to add (serch.dlm) it, it does not working.

 

Here are some errors from log messages:

 

Jul 10 19:49:44 synonet: net_default_gateway_set.c:36 failed to set default gateway 192.168.1.1 (256).

Jul 10 20:12:40 initdata.cgi: net_external_ip_get.c(27) : Failed to get external IP by /usr/syno/sbin/ddnsd, WEXITSTATUS®=139

Jul 10 20:14:11 PkgSynoMan.cgi: PkgSynoMan.cpp:887 No available path

Jul 10 20:12:54 network.cgi: common_setting.cpp:353 set dns failed [0x0D00]

 

I did add two network card ... to test it, but the problems are still there ...

 

https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/IMG_0890.JPG

Link to comment
Share on other sites

This is the log /var/run/dmesg.boot

 

When i read the log correct my ssd (system HDD) will be mount as SDB and not as SDA. I think this is a problem or ?

 

[    0.000000] Linux version 3.2.11 (root@debian) (gcc version 4.2.0) #4 SMP Sat Jul 6 17:38:11 CEST 2013
[    0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=0011060b0033 mac4=0011060b0034 sn=B5JDN00000 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006ec3c000 (usable)
[    0.000000]  BIOS-e820: 000000006ec3c000 - 000000006ec90000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ec90000 - 000000006ecb1000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecb1000 - 000000006ecc2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ecc2000 - 000000006ecd8000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecd8000 - 000000006ecd9000 (usable)
[    0.000000]  BIOS-e820: 000000006ecd9000 - 000000006ecda000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ecda000 - 000000006ecdd000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecdd000 - 000000006ece4000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ece4000 - 000000006ed48000 (reserved)
[    0.000000]  BIOS-e820: 000000006ed48000 - 000000006ed8b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ed8b000 - 000000006ef00000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/E45M1-M PRO, BIOS 1202 08/07/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x6ef00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-D0FFF write-protect
[    0.000000]   D1000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 06EF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 06F000000 mask FFF000000 uncachable
[    0.000000]   3 base 070000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [ffff8800000fce20] fce20
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-000000006ef00000
[    0.000000]  0000000000 - 0040000000 page 1G
[    0.000000]  0040000000 - 006ee00000 page 2M
[    0.000000]  006ee00000 - 006ef00000 page 4k
[    0.000000] kernel direct mapping tables up to 6ef00000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 6e691000 - 6ec2c000
[    0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 000000006ec85068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000006ec8b2e8 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 000000006ec85150 06192 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 000000006ece3f80 00040
[    0.000000] ACPI: APIC 000000006ec8b3e0 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 000000006ec8b448 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 000000006ec8b488 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 000000006ec8b4c0 003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 000000006ec8b8a0 0168E (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006c200000-ffff88006dbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0006ec3c
[    0.000000]     0: 0x0006ecd8 -> 0x0006ecd9
[    0.000000]     0: 0x0006ed8b -> 0x0006ef00
[    0.000000] On node 0 totalpages: 453951
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6157 pages used for memmap
[    0.000000]   DMA32 zone: 443813 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000006ec3c000 - 000000006ec90000
[    0.000000] PM: Registered nosave memory: 000000006ec90000 - 000000006ecb1000
[    0.000000] PM: Registered nosave memory: 000000006ecb1000 - 000000006ecc2000
[    0.000000] PM: Registered nosave memory: 000000006ecc2000 - 000000006ecd8000
[    0.000000] PM: Registered nosave memory: 000000006ecd9000 - 000000006ecda000
[    0.000000] PM: Registered nosave memory: 000000006ecda000 - 000000006ecdd000
[    0.000000] PM: Registered nosave memory: 000000006ecdd000 - 000000006ece4000
[    0.000000] PM: Registered nosave memory: 000000006ece4000 - 000000006ed48000
[    0.000000] PM: Registered nosave memory: 000000006ed48000 - 000000006ed8b000
[    0.000000] Allocating PCI resources starting at 6ef00000 (gap: 6ef00000:8fd00000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006e400000 s69824 r8192 d24384 u1048576
[    0.000000] pcpu-alloc: s69824 r8192 d24384 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 447733
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=0011060b0033 mac4=0011060b0034 sn=B5JDN00000 
[    0.000000] Internal HD num: 0
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hareware Version: DS3612xs-j
[    0.000000] Mac1: 00113208d62a
[    0.000000] Mac2: 00113208d62b
[    0.000000] Mac3: 0011060b0033
[    0.000000] Mac4: 0011060b0034
[    0.000000] Serial Number: B5JDN00000
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 1770356k/1817600k available (4737k kernel code, 1796k absent, 45448k reserved, 3845k data, 428k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1650.168 MHz processor.
[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3300.33 BogoMIPS (lpj=1650168)
[    0.001270] pid_max: default: 32768 minimum: 301
[    0.001470] Mount-cache hash table entries: 256
[    0.002145] tseg: 006ef00000
[    0.002149] CPU: Physical Processor ID: 0
[    0.002296] CPU: Processor Core ID: 0
[    0.002426] mce: CPU supports 6 MCE banks
[    0.002621] ACPI: Core revision 20110623
[    0.008853] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019014] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00
[    0.019998] Performance Events: AMD PMU driver.
[    0.019998] ... version:                0
[    0.019998] ... bit width:              48
[    0.019998] ... generic registers:      4
[    0.019998] ... value mask:             0000ffffffffffff
[    0.019998] ... max period:             00007fffffffffff
[    0.019998] ... fixed-purpose events:   0
[    0.019998] ... event mask:             000000000000000f
[    0.020286] Booting Node   0, Processors  #1 Ok.
[    0.020471] smpboot cpu 1: start_ip = 98000
[    0.092007] Brought up 2 CPUs
[    0.092162] Total of 2 processors activated (6599.90 BogoMIPS).
[    0.093203] PM: Registering ACPI NVS region at 6ec3c000 (344064 bytes)
[    0.093355] PM: Registering ACPI NVS region at 6ecb1000 (69632 bytes)
[    0.093485] PM: Registering ACPI NVS region at 6ecd9000 (4096 bytes)
[    0.093615] PM: Registering ACPI NVS region at 6ecdd000 (28672 bytes)
[    0.093759] PM: Registering ACPI NVS region at 6ed48000 (274432 bytes)
[    0.094060] xor: automatically using best checksumming function: generic_sse
[    0.098995]    generic_sse:  3284.000 MB/sec
[    0.099120] xor: using function: generic_sse (3284.000 MB/sec)
[    0.099331] NET: Registered protocol family 16
[    0.100131] Extended Config Space enabled on 0 nodes
[    0.100299] ACPI: bus type pci registered
[    0.101044] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.101256] PCI: not using MMCONFIG
[    0.101396] PCI: Using configuration type 1 for base access
[    0.101524] PCI: Using configuration type 1 for extended access
[    0.115191] bio: create slab  at 0
[    0.133021] raid6: int64x1    859 MB/s
[    0.150021] raid6: int64x2    960 MB/s
[    0.167023] raid6: int64x4    941 MB/s
[    0.184049] raid6: int64x8    800 MB/s
[    0.201022] raid6: sse2x1    1398 MB/s
[    0.218006] raid6: sse2x2    1632 MB/s
[    0.234978] raid6: sse2x4    2335 MB/s
[    0.235104] raid6: using algorithm sse2x4 (2335 MB/s)
[    0.235265] ACPI: Added _OSI(Module Device)
[    0.235406] ACPI: Added _OSI(Processor Device)
[    0.235533] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.235673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.237010] ACPI: EC: Look up EC in DSDT
[    0.238713] ACPI: Executed 3 blocks of module-level executable AML code
[    0.242765] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.242978] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[    0.246648] ACPI: Interpreter enabled
[    0.246796] ACPI: (supports S0 S4 S5)
[    0.246982] ACPI: Using IOAPIC for interrupt routing
[    0.247390] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.247679] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.284185] ACPI: No dock devices found.
[    0.285017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.286113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.286421] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.286544] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.286970] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.287160] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.287366] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff]
[    0.287577] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[    0.287803] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[    0.287858] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300
[    0.287873] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.287883] pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
[    0.287989] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[    0.288047] pci 0000:00:01.0: supports D1 D2
[    0.288072] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[    0.288086] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
[    0.288153] pci 0000:00:01.1: supports D1 D2
[    0.288200] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[    0.288270] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.288277] pci 0000:00:04.0: PME# disabled
[    0.288332] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.288358] pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
[    0.288372] pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
[    0.288386] pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
[    0.288399] pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
[    0.288412] pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
[    0.288425] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff]
[    0.288502] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.288520] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[    0.288612] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.288638] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[    0.288740] pci 0000:00:12.2: supports D1 D2
[    0.288744] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.288751] pci 0000:00:12.2: PME# disabled
[    0.288780] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.288798] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff]
[    0.288890] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.288915] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff]
[    0.289022] pci 0000:00:13.2: supports D1 D2
[    0.289026] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.289033] pci 0000:00:13.2: PME# disabled
[    0.289061] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.289160] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.289258] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.289315] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.289335] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff]
[    0.289428] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[    0.289527] pci 0000:00:15.0: supports D1 D2
[    0.289563] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[    0.289662] pci 0000:00:15.1: supports D1 D2
[    0.289697] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[    0.289795] pci 0000:00:15.2: supports D1 D2
[    0.289833] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.289852] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[    0.289945] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.289977] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[    0.290080] pci 0000:00:16.2: supports D1 D2
[    0.290084] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.290090] pci 0000:00:16.2: PME# disabled
[    0.290122] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[    0.290172] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[    0.290218] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[    0.290265] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[    0.290325] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[    0.290371] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[    0.290416] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[    0.290462] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[    0.290590] pci 0000:01:00.0: [13c1:1004] type 0 class 0x000104
[    0.290611] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.290628] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea20fff 64bit]
[    0.290640] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.290659] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
[    0.290703] pci 0000:01:00.0: supports D1 D2
[    0.292032] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.292200] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.292207] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.292216] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.292302] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[    0.292454] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.292459] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.292464] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.292469] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.292540] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.292779] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.292806] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.292846] pci 0000:04:00.0: reg 18: [mem 0xd2004000-0xd2004fff 64bit pref]
[    0.292873] pci 0000:04:00.0: reg 20: [mem 0xd2000000-0xd2003fff 64bit pref]
[    0.292995] pci 0000:04:00.0: supports D1 D2
[    0.292999] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.293008] pci 0000:04:00.0: PME# disabled
[    0.295001] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.295164] pci 0000:00:15.1:   bridge window [io  0xd000-0xdfff]
[    0.295176] pci 0000:00:15.1:   bridge window [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.295265] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604
[    0.295401] pci 0000:00:15.2: PCI bridge to [bus 05-06]
[    0.295533] pci 0000:00:15.2:   bridge window [io  0xc000-0xcfff]
[    0.295539] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.295618] pci 0000:06:02.0: [1106:3044] type 0 class 0x000c00
[    0.295656] pci 0000:06:02.0: reg 10: [mem 0xfe900000-0xfe9007ff]
[    0.295677] pci 0000:06:02.0: reg 14: [io  0xc000-0xc07f]
[    0.295820] pci 0000:06:02.0: supports D2
[    0.295824] pci 0000:06:02.0: PME# supported from D2 D3hot D3cold
[    0.295832] pci 0000:06:02.0: PME# disabled
[    0.295915] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.295977] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.295985] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.295998] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.296003] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff] (subtractive decode)
[    0.296008] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.296014] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.296060] pci_bus 0000:00: on NUMA node 0
[    0.296072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.296404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.296464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[    0.296523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[    0.296589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[    0.296654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22.BR23._PRT]
[    0.296745]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.296972]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.297194] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.309112] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.310251] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.310876] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.311540] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.312073] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.312668] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.313338] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.313913] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.314997] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.314997] vgaarb: loaded
[    0.315129] vgaarb: bridge control possible 0000:00:01.0
[    0.315411] SCSI subsystem initialized
[    0.316069] libata version 3.00 loaded.
[    0.316981] PCI: Using ACPI for IRQ routing
[    0.327752] PCI: pci_cache_line_size set to 64 bytes
[    0.327901] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    0.327906] reserve RAM buffer: 000000006ec3c000 - 000000006fffffff 
[    0.327913] reserve RAM buffer: 000000006ecd9000 - 000000006fffffff 
[    0.327919] reserve RAM buffer: 000000006ef00000 - 000000006fffffff 
[    0.328128] Switching to clocksource hpet
[    0.328340] pnp: PnP ACPI init
[    0.328521] ACPI: bus type pnp registered
[    0.328974] pnp 00:00: [bus 00-ff]
[    0.328979] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.328983] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.328988] pnp 00:00: [io  0x0d00-0xffff window]
[    0.328992] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.328996] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.329066] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[    0.329070] pnp 00:00: [mem 0x00000000 window]
[    0.329244] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.329318] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.329548] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.329716] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.330546] pnp 00:02: [io  0x040b]
[    0.330550] pnp 00:02: [io  0x04d6]
[    0.330554] pnp 00:02: [io  0x0c00-0x0c01]
[    0.330558] pnp 00:02: [io  0x0c14]
[    0.330561] pnp 00:02: [io  0x0c50-0x0c51]
[    0.330565] pnp 00:02: [io  0x0c52]
[    0.330568] pnp 00:02: [io  0x0c6c]
[    0.330571] pnp 00:02: [io  0x0c6f]
[    0.330574] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.330578] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.330581] pnp 00:02: [io  0x0cd4-0x0cd5]
[    0.330584] pnp 00:02: [io  0x0cd6-0x0cd7]
[    0.330587] pnp 00:02: [io  0x0cd8-0x0cdf]
[    0.330591] pnp 00:02: [io  0x0800-0x089f]
[    0.330595] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.330598] pnp 00:02: [io  0x0000-0x000f]
[    0.330602] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.330605] pnp 00:02: [io  0x0900-0x090f]
[    0.330608] pnp 00:02: [io  0x0910-0x091f]
[    0.330612] pnp 00:02: [io  0xfe00-0xfefe]
[    0.330615] pnp 00:02: [io  0x0060-0x005f disabled]
[    0.330619] pnp 00:02: [io  0x0064-0x0063 disabled]
[    0.330623] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.330626] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.330630] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[    0.330634] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[    0.330637] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[    0.330643] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.330646] pnp 00:02: [mem 0xffc00000-0xffffffff]
[    0.330933] system 00:02: [io  0x040b] has been reserved
[    0.331111] system 00:02: [io  0x04d6] has been reserved
[    0.331239] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.331372] system 00:02: [io  0x0c14] has been reserved
[    0.331502] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.331645] system 00:02: [io  0x0c52] has been reserved
[    0.331774] system 00:02: [io  0x0c6c] has been reserved
[    0.331915] system 00:02: [io  0x0c6f] has been reserved
[    0.332098] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.332223] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.332342] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.332476] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.332596] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.332714] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.332834] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.332954] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.333085] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.333206] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.333330] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.333467] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.333590] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.333725] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.333845] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.333964] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.334097] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[    0.334221] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334469] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.334474] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.334478] pnp 00:03: [io  0x0290-0x029f]
[    0.334481] pnp 00:03: [io  0x0a20-0x0a2f]
[    0.334702] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.334831] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.334953] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335323] pnp 00:04: [dma 4]
[    0.335328] pnp 00:04: [io  0x0000-0x000f]
[    0.335332] pnp 00:04: [io  0x0081-0x0083]
[    0.335336] pnp 00:04: [io  0x0087]
[    0.335339] pnp 00:04: [io  0x0089-0x008b]
[    0.335343] pnp 00:04: [io  0x008f]
[    0.335346] pnp 00:04: [io  0x00c0-0x00df]
[    0.335532] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.335571] pnp 00:05: [io  0x0070-0x0071]
[    0.335590] pnp 00:05: [irq 8]
[    0.335730] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.335774] pnp 00:06: [io  0x0061]
[    0.335977] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.336081] pnp 00:07: [io  0x0010-0x001f]
[    0.336086] pnp 00:07: [io  0x0022-0x003f]
[    0.336089] pnp 00:07: [io  0x0044-0x005f]
[    0.336093] pnp 00:07: [io  0x0072-0x007f]
[    0.336096] pnp 00:07: [io  0x0080]
[    0.336099] pnp 00:07: [io  0x0084-0x0086]
[    0.336102] pnp 00:07: [io  0x0088]
[    0.336105] pnp 00:07: [io  0x008c-0x008e]
[    0.336109] pnp 00:07: [io  0x0090-0x009f]
[    0.336112] pnp 00:07: [io  0x00a2-0x00bf]
[    0.336115] pnp 00:07: [io  0x00e0-0x00ef]
[    0.336120] pnp 00:07: [io  0x04d0-0x04d1]
[    0.336281] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.336423] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336443] pnp 00:08: [io  0x00f0-0x00ff]
[    0.336461] pnp 00:08: [irq 13]
[    0.336675] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.336930] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337414] pnp 00:0a: [mem 0x6f000000-0x7effffff]
[    0.337550] system 00:0a: [mem 0x6f000000-0x7effffff] could not be reserved
[    0.337691] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337939] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[    0.338094] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.338105] pnp: PnP ACPI: found 12 devices
[    0.338224] ACPI: ACPI bus type pnp unregistered
[    0.351052] PCI: max bus depth: 2 pci_try_num: 3
[    0.351124] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.351261] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.351391] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.351524] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.351748] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.351903] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.352066] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.352194] pci 0000:00:15.1:   bridge window [io  0xd000-0xdfff]
[    0.352331] pci 0000:00:15.1:   bridge window [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.352538] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[    0.352672] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.352796] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.352943] pci 0000:00:15.2: PCI bridge to [bus 05-06]
[    0.353074] pci 0000:00:15.2:   bridge window [io  0xc000-0xcfff]
[    0.353196] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.353365] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353494] pci 0000:00:04.0: setting latency timer to 64
[    0.353510] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353646] pci 0000:00:15.0: setting latency timer to 64
[    0.353656] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353778] pci 0000:00:15.1: setting latency timer to 64
[    0.353788] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353924] pci 0000:00:15.2: setting latency timer to 64
[    0.353941] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.354078] pci 0000:05:00.0: setting latency timer to 64
[    0.354086] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.354090] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.354094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.354098] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[    0.354103] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.354107] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.354111] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.354115] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.354119] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.354123] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.354127] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[    0.354131] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.354135] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.354140] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.354143] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.354147] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.354151] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.354155] pci_bus 0000:06: resource 4 [io  0xc000-0xcfff]
[    0.354159] pci_bus 0000:06: resource 5 [mem 0xfe900000-0xfe9fffff]
[    0.354285] NET: Registered protocol family 2
[    0.354549] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.355323] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.357854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.358619] TCP: Hash tables configured (established 262144 bind 65536)
[    0.358768] TCP reno registered
[    0.358912] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359100] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359389] NET: Registered protocol family 1
[    0.359838] RPC: Registered named UNIX socket transport module.
[    0.359991] RPC: Registered udp transport module.
[    0.360149] RPC: Registered tcp transport module.
[    0.360276] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.360437] pci 0000:00:01.0: Boot video device
[    0.360469] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.180254] pci 0000:00:12.0: PCI INT A disabled
[    1.180441] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.180613] pci 0000:00:12.2: PCI INT B disabled
[    1.180763] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.253247] pci 0000:00:13.0: PCI INT A disabled
[    1.253414] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.253584] pci 0000:00:13.2: PCI INT B disabled
[    1.253744] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.326249] pci 0000:00:14.5: PCI INT C disabled
[    1.326428] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.398255] pci 0000:00:16.0: PCI INT A disabled
[    1.398436] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.398607] pci 0000:00:16.2: PCI INT B disabled
[    1.398788] PCI: CLS 64 bytes, default 64
[    1.398894] Trying to unpack rootfs image as initramfs...
[    1.399297] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    1.405330] Freeing initrd memory: 5740k freed
[    1.410637] perf: AMD IBS detected (0x000000ff)
[    1.412090] Intel AES-NI instructions are not detected.
[    1.412243] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    1.420653] VFS: Disk quotas dquot_6.5.2
[    1.420879] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.421839] msgmni has been set to 3468
[    1.422556] async_tx: api initialized (async)
[    1.422892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.423166] io scheduler noop registered
[    1.423359] io scheduler cfq registered (default)
[    1.476487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.498230] brd: module loaded
[    1.498757] Loading iSCSI transport class v2.0-870.
[    1.500120] rdac: device handler registered
[    1.500755] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.501104] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0
[    1.501675] iscsi: registered transport (qla4xxx)
[    1.501970] QLogic iSCSI HBA Driver
[    1.502332] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[    1.502595] mpt2sas version 11.100.00.00 loaded
[    1.502957] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.503292] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.503547] 3w-9xxx 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.503697] 3w-9xxx 0000:01:00.0: setting latency timer to 64
[    1.759248] scsi0 : 3ware 9000 Storage Controller
[    1.760251] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.
[    2.066240] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.
[    2.067176] scsi 0:0:0:0: Direct-Access     AMCC     9650SE-8LP DISK  4.10 PQ: 0 ANSI: 5
[    2.078826] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    2.079378] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    2.079864] VMware PVSCSI driver - version 1.0.1.0-k
[    2.080583] sd 0:0:0:0: [sda] 5859311616 512-byte logical blocks: (2.99 TB/2.72 TiB)
[    2.080928] ahci 0000:00:11.0: version 3.0
[    2.080979] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.081310] sd 0:0:0:0: [sda] Write Protect is off
[    2.081373] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.081379] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.081980] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[    2.082435] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    2.085059] scsi1 : ahci
[    2.085708] scsi2 : ahci
[    2.086246] scsi3 : ahci
[    2.086762] scsi4 : ahci
[    2.087177] scsi5 : ahci
[    2.087624] scsi6 : ahci
[    2.088150] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19
[    2.090947] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19
[    2.091162] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19
[    2.091364] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19
[    2.091566] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19
[    2.091769] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19
[    2.091971] Enable Synology sata fast booting
[    2.129952]  sda: sda1 sda2
[    2.132323] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.412301] Refined TSC clocksource calibration: 1649.962 MHz.
[    2.412460] Switching to clocksource tsc
[    3.924523] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    3.924828] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    3.924989] Copyright (c) 2007 Atheros Corporation.
[    3.925407] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[    3.925690] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25)
[    3.926341] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    3.926504] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.926742] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.926904] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.927201] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[    3.927363] Copyright (c) 2007-2011 Intel Corporation.
[    3.927662] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    3.928029] sky2: driver version 1.30
[    3.928430] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
[    3.929224] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
[    3.929985] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.933470] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.933624] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.934050] rtc_cmos 00:05: RTC can wake from S4
[    3.934403] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.934603] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.934813] i2c /dev entries driver
[    3.935083] md: linear personality registered for level -1
[    3.935228] md: raid0 personality registered for level 0
[    3.935371] md: raid1 personality registered for level 1
[    3.935514] md: raid10 personality registered for level 10
[    3.935657] md: raid6 personality registered for level 6
[    3.935798] md: raid5 personality registered for level 5
[    3.935935] md: raid4 personality registered for level 4
[    3.936277] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.936517] cpuidle: using governor ladder
[    3.936649] cpuidle: using governor menu
[    3.937128] TCP cubic registered
[    3.937276] NET: Registered protocol family 17
[    3.938246] rtc_cmos 00:05: setting system clock to 2013-07-10 17:59:06 UTC (1373479146)
[    4.227246] ata4: SATA link down (SStatus 0 SControl 300)
[    4.227448] ata3: SATA link down (SStatus 0 SControl 300)
[    4.227633] ata2: SATA link down (SStatus 0 SControl 300)
[    4.227823] ata5: SATA link down (SStatus 0 SControl 300)
[    4.228096] ata6: SATA link down (SStatus 0 SControl 300)
[    4.382269] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.382920] ata1.00: ATA-8: STT_FTM32GX25H, 1819, max UDMA/133
[    4.383092] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    4.386418] ata1.00: configured for UDMA/133
[    4.386680] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
[    4.387149] scsi 1:0:0:0: Direct-Access     ATA      STT_FTM32GX25H   1819 PQ: 0 ANSI: 5
[    4.388071] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    4.388437] sd 1:0:0:0: [sdb] Write Protect is off
[    4.388593] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.388654] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.390056]  sdb: sdb1 sdb2
[    4.391259] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.391480] md: Waiting for all devices to be available before autodetect
[    4.391654] md: If you don't use raid, use raid=noautodetect
[    4.392299] md: Autodetecting RAID arrays.
[    4.395699] md: deny sda1.
[    4.395867] md: export_rdev(sda1)
[    4.414045] md: deny sda2.
[    4.414210] md: export_rdev(sda2)
[    4.415058] md: Scanned 4 and added 2 devices.
[    4.415233] md: autorun ...
[    4.415370] md: considering sdb1 ...
[    4.415518] md:  adding sdb1 ...
[    4.415659] md: sdb2 has different UUID to sdb1
[    4.415807] md: created md0
[    4.415946] md: bind
[    4.416124] md: running: 
[    4.416696] bio: create slab  at 1
[    4.417047] md/raid1:md0: active with 1 out of 12 mirrors
[    4.417238] md0: detected capacity change from 0 to 2549940224
[    4.417531] md: considering sdb2 ...
[    4.417700] md:  adding sdb2 ...
[    4.418272] md: created md1
[    4.418426] md: bind
[    4.418571] md: running: 
[    4.419100] md/raid1:md1: active with 1 out of 12 mirrors
[    4.419293] md1: detected capacity change from 0 to 2147418112
[    4.419574] md: ... autorun DONE.
[    4.420099]  md1: unknown partition table
[    4.420500] RAMDISK: gzip image found at block 0
[    4.685482] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    4.701060] e1000e: Intel(R) PRO/1000 Network Driver - 2.4.14-NAPI
[    4.701226] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    4.714749] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
[    4.714966] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.715156] r8168 0000:04:00.0: setting latency timer to 64
[    4.715250] r8168 0000:04:00.0: irq 40 for MSI/MSI-X
[    4.726221] eth%d: 0xffffc9000005a000, 60:a4:4c:b2:96:b5, IRQ 40
[    4.729476] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    4.729732] r8168  Copyright (C) 2013  Realtek NIC software team 
[    4.729735]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
[    4.729737]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
[    4.734415] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    4.734583] Disabling lock debugging due to kernel taint
[    4.737155] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
[    4.737469] IP: [] syno_libata_index_get_by_map+0x36/0x83
[    4.737662] PGD 6b1cb067 PUD 6b1ca067 PMD 0 
[    4.737931] Oops: 0000 [#1] SMP 
[    4.738005] CPU 0 
[    4.738005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
[    4.738005] 
[    4.738005] Pid: 1273, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
[    4.738005] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
[    4.738005] RSP: 0018:ffff88006dfbbd48  EFLAGS: 00010286
[    4.738005] RAX: 0000000000000000 RBX: ffff88006dfbbd58 RCX: 0000000000000000
[    4.738005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006dfbbd58
[    4.738005] RBP: ffff88006ac68000 R08: ffffffff81921c60 R09: 0000000000000000
[    4.738005] R10: ffff88006b3fa400 R11: 0000000000000016 R12: 0000000000000000
[    4.738005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
[    4.738005] FS:  0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000
[    4.738005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    4.738005] CR2: 0000000000000068 CR3: 000000006b1ce000 CR4: 00000000000006f0
[    4.738005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.738005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    4.738005] Process insmod (pid: 1273, threadinfo ffff88006dfba000, task ffff88006b3b77d0)
[    4.738005] Stack:
[    4.738005]  ffff88006ac68000 ffffffff812077f8 0000000000000000 ffffffffa009f720
[    4.738005]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
[    4.738005]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
[    4.738005] Call Trace:
[    4.738005]  [] ? scsi_host_lookup+0x46/0x4e
[    4.738005]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
[    4.738005]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
[    4.738005]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
[    4.738005]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
[    4.738005]  [] ? do_one_initcall+0x79/0x127
[    4.738005]  [] ? sys_init_module+0x104a/0x11ef
[    4.738005]  [] ? fput+0x175/0x196
[    4.738005]  [] ? filp_close+0x64/0x6c
[    4.738005]  [] ? system_call_fastpath+0x16/0x1b
[    4.738005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
[    4.738005] RIP  [] syno_libata_index_get_by_map+0x36/0x83
[    4.738005]  RSP 
[    4.738005] CR2: 0000000000000068
[    4.747597] ---[ end trace 454336d2c682554a ]---
[    4.786724]  md0: unknown partition table
[    4.875779] EXT4-fs (md0): barriers disabled
[    4.876564] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[    5.037810] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   12.389781] synoacl module [synoacl_ext4] is not loaded 
[   12.389950] synoacl module [synoacl_vfs] is not loaded 
[   12.410534] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
[   12.497663] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   12.497932] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[   12.498099] Trying to move old root to /initrd ... okay
[   12.501312] Freeing unused kernel memory: 428k freed
[   12.501671] Write protecting the kernel read-only data: 8192k
[   12.509830] Freeing unused kernel memory: 1388k freed
[   12.512051] Freeing unused kernel memory: 196k freed
[   12.543232] EXT4-fs (md0): re-mounted. Opts: (null)

Link to comment
Share on other sites

@interested : any issue to report ?

 

- if I open Package Center and check the "Available" tab, I get an error message saying "Connection failed. Please check your network settings.".

 

I don`t have this problem with 4.2.3202 & 4.2.3211 - so I must manually install Package

 

- in Stationdownload, under settings, tab BT Search - I dont see any search engine plugin , if I want to add (serch.dlm) it, it does not working.

 

Here are some errors from log messages:

 

Jul 10 19:49:44 synonet: net_default_gateway_set.c:36 failed to set default gateway 192.168.1.1 (256).

Jul 10 20:12:40 initdata.cgi: net_external_ip_get.c(27) : Failed to get external IP by /usr/syno/sbin/ddnsd, WEXITSTATUS®=139

Jul 10 20:14:11 PkgSynoMan.cgi: PkgSynoMan.cpp:887 No available path

Jul 10 20:12:54 network.cgi: common_setting.cpp:353 set dns failed [0x0D00]

 

I did add two network card ... to test it, but the problems are still there ...

 

https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/IMG_0890.JPG

 

After some investigation I found something in kernel config about crypto.

From the beginning we compil crypto stack as built-in. But on official syno this is built as modules.

This is why we see all insmod errors about crypto...

I need to start from scratch with config file to be able to build crypto as module

 

@herbyesk : I need to test with my LSI SAS controller. Maybe some firmware issue :-|

Link to comment
Share on other sites

This is the log /var/run/dmesg.boot

 

When i read the log correct my ssd (system HDD) will be mount as SDB and not as SDA. I think this is a problem or ?

 

[    0.000000] Linux version 3.2.11 (root@debian) (gcc version 4.2.0) #4 SMP Sat Jul 6 17:38:11 CEST 2013
[    0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=0011060b0033 mac4=0011060b0034 sn=B5JDN00000 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006ec3c000 (usable)
[    0.000000]  BIOS-e820: 000000006ec3c000 - 000000006ec90000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ec90000 - 000000006ecb1000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecb1000 - 000000006ecc2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ecc2000 - 000000006ecd8000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecd8000 - 000000006ecd9000 (usable)
[    0.000000]  BIOS-e820: 000000006ecd9000 - 000000006ecda000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ecda000 - 000000006ecdd000 (reserved)
[    0.000000]  BIOS-e820: 000000006ecdd000 - 000000006ece4000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ece4000 - 000000006ed48000 (reserved)
[    0.000000]  BIOS-e820: 000000006ed48000 - 000000006ed8b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006ed8b000 - 000000006ef00000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/E45M1-M PRO, BIOS 1202 08/07/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x6ef00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-D0FFF write-protect
[    0.000000]   D1000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 06EF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 06F000000 mask FFF000000 uncachable
[    0.000000]   3 base 070000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [ffff8800000fce20] fce20
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-000000006ef00000
[    0.000000]  0000000000 - 0040000000 page 1G
[    0.000000]  0040000000 - 006ee00000 page 2M
[    0.000000]  006ee00000 - 006ef00000 page 4k
[    0.000000] kernel direct mapping tables up to 6ef00000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 6e691000 - 6ec2c000
[    0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 000000006ec85068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000006ec8b2e8 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 000000006ec85150 06192 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 000000006ece3f80 00040
[    0.000000] ACPI: APIC 000000006ec8b3e0 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 000000006ec8b448 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 000000006ec8b488 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 000000006ec8b4c0 003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 000000006ec8b8a0 0168E (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006c200000-ffff88006dbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0006ec3c
[    0.000000]     0: 0x0006ecd8 -> 0x0006ecd9
[    0.000000]     0: 0x0006ed8b -> 0x0006ef00
[    0.000000] On node 0 totalpages: 453951
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6157 pages used for memmap
[    0.000000]   DMA32 zone: 443813 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000006ec3c000 - 000000006ec90000
[    0.000000] PM: Registered nosave memory: 000000006ec90000 - 000000006ecb1000
[    0.000000] PM: Registered nosave memory: 000000006ecb1000 - 000000006ecc2000
[    0.000000] PM: Registered nosave memory: 000000006ecc2000 - 000000006ecd8000
[    0.000000] PM: Registered nosave memory: 000000006ecd9000 - 000000006ecda000
[    0.000000] PM: Registered nosave memory: 000000006ecda000 - 000000006ecdd000
[    0.000000] PM: Registered nosave memory: 000000006ecdd000 - 000000006ece4000
[    0.000000] PM: Registered nosave memory: 000000006ece4000 - 000000006ed48000
[    0.000000] PM: Registered nosave memory: 000000006ed48000 - 000000006ed8b000
[    0.000000] Allocating PCI resources starting at 6ef00000 (gap: 6ef00000:8fd00000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006e400000 s69824 r8192 d24384 u1048576
[    0.000000] pcpu-alloc: s69824 r8192 d24384 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 447733
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs  mac1=00113208d62a mac2=00113208d62b mac3=0011060b0033 mac4=0011060b0034 sn=B5JDN00000 
[    0.000000] Internal HD num: 0
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hareware Version: DS3612xs-j
[    0.000000] Mac1: 00113208d62a
[    0.000000] Mac2: 00113208d62b
[    0.000000] Mac3: 0011060b0033
[    0.000000] Mac4: 0011060b0034
[    0.000000] Serial Number: B5JDN00000
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 1770356k/1817600k available (4737k kernel code, 1796k absent, 45448k reserved, 3845k data, 428k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1650.168 MHz processor.
[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3300.33 BogoMIPS (lpj=1650168)
[    0.001270] pid_max: default: 32768 minimum: 301
[    0.001470] Mount-cache hash table entries: 256
[    0.002145] tseg: 006ef00000
[    0.002149] CPU: Physical Processor ID: 0
[    0.002296] CPU: Processor Core ID: 0
[    0.002426] mce: CPU supports 6 MCE banks
[    0.002621] ACPI: Core revision 20110623
[    0.008853] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019014] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00
[    0.019998] Performance Events: AMD PMU driver.
[    0.019998] ... version:                0
[    0.019998] ... bit width:              48
[    0.019998] ... generic registers:      4
[    0.019998] ... value mask:             0000ffffffffffff
[    0.019998] ... max period:             00007fffffffffff
[    0.019998] ... fixed-purpose events:   0
[    0.019998] ... event mask:             000000000000000f
[    0.020286] Booting Node   0, Processors  #1 Ok.
[    0.020471] smpboot cpu 1: start_ip = 98000
[    0.092007] Brought up 2 CPUs
[    0.092162] Total of 2 processors activated (6599.90 BogoMIPS).
[    0.093203] PM: Registering ACPI NVS region at 6ec3c000 (344064 bytes)
[    0.093355] PM: Registering ACPI NVS region at 6ecb1000 (69632 bytes)
[    0.093485] PM: Registering ACPI NVS region at 6ecd9000 (4096 bytes)
[    0.093615] PM: Registering ACPI NVS region at 6ecdd000 (28672 bytes)
[    0.093759] PM: Registering ACPI NVS region at 6ed48000 (274432 bytes)
[    0.094060] xor: automatically using best checksumming function: generic_sse
[    0.098995]    generic_sse:  3284.000 MB/sec
[    0.099120] xor: using function: generic_sse (3284.000 MB/sec)
[    0.099331] NET: Registered protocol family 16
[    0.100131] Extended Config Space enabled on 0 nodes
[    0.100299] ACPI: bus type pci registered
[    0.101044] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.101256] PCI: not using MMCONFIG
[    0.101396] PCI: Using configuration type 1 for base access
[    0.101524] PCI: Using configuration type 1 for extended access
[    0.115191] bio: create slab  at 0
[    0.133021] raid6: int64x1    859 MB/s
[    0.150021] raid6: int64x2    960 MB/s
[    0.167023] raid6: int64x4    941 MB/s
[    0.184049] raid6: int64x8    800 MB/s
[    0.201022] raid6: sse2x1    1398 MB/s
[    0.218006] raid6: sse2x2    1632 MB/s
[    0.234978] raid6: sse2x4    2335 MB/s
[    0.235104] raid6: using algorithm sse2x4 (2335 MB/s)
[    0.235265] ACPI: Added _OSI(Module Device)
[    0.235406] ACPI: Added _OSI(Processor Device)
[    0.235533] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.235673] ACPI: Added _OSI(Processor Aggregator Device)
[    0.237010] ACPI: EC: Look up EC in DSDT
[    0.238713] ACPI: Executed 3 blocks of module-level executable AML code
[    0.242765] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.242978] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[    0.246648] ACPI: Interpreter enabled
[    0.246796] ACPI: (supports S0 S4 S5)
[    0.246982] ACPI: Using IOAPIC for interrupt routing
[    0.247390] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.247679] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.284185] ACPI: No dock devices found.
[    0.285017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.286113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.286421] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.286544] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.286970] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.287160] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.287366] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff]
[    0.287577] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[    0.287803] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[    0.287858] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300
[    0.287873] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.287883] pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
[    0.287989] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[    0.288047] pci 0000:00:01.0: supports D1 D2
[    0.288072] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[    0.288086] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
[    0.288153] pci 0000:00:01.1: supports D1 D2
[    0.288200] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[    0.288270] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.288277] pci 0000:00:04.0: PME# disabled
[    0.288332] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.288358] pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
[    0.288372] pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
[    0.288386] pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
[    0.288399] pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
[    0.288412] pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
[    0.288425] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff]
[    0.288502] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.288520] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[    0.288612] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.288638] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[    0.288740] pci 0000:00:12.2: supports D1 D2
[    0.288744] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.288751] pci 0000:00:12.2: PME# disabled
[    0.288780] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.288798] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff]
[    0.288890] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.288915] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff]
[    0.289022] pci 0000:00:13.2: supports D1 D2
[    0.289026] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.289033] pci 0000:00:13.2: PME# disabled
[    0.289061] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.289160] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.289258] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.289315] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.289335] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff]
[    0.289428] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[    0.289527] pci 0000:00:15.0: supports D1 D2
[    0.289563] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[    0.289662] pci 0000:00:15.1: supports D1 D2
[    0.289697] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[    0.289795] pci 0000:00:15.2: supports D1 D2
[    0.289833] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.289852] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[    0.289945] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.289977] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[    0.290080] pci 0000:00:16.2: supports D1 D2
[    0.290084] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.290090] pci 0000:00:16.2: PME# disabled
[    0.290122] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[    0.290172] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[    0.290218] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[    0.290265] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[    0.290325] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[    0.290371] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[    0.290416] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[    0.290462] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[    0.290590] pci 0000:01:00.0: [13c1:1004] type 0 class 0x000104
[    0.290611] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.290628] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea20fff 64bit]
[    0.290640] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.290659] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
[    0.290703] pci 0000:01:00.0: supports D1 D2
[    0.292032] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.292200] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.292207] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.292216] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.292302] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[    0.292454] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.292459] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.292464] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.292469] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.292540] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.292779] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.292806] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.292846] pci 0000:04:00.0: reg 18: [mem 0xd2004000-0xd2004fff 64bit pref]
[    0.292873] pci 0000:04:00.0: reg 20: [mem 0xd2000000-0xd2003fff 64bit pref]
[    0.292995] pci 0000:04:00.0: supports D1 D2
[    0.292999] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.293008] pci 0000:04:00.0: PME# disabled
[    0.295001] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.295164] pci 0000:00:15.1:   bridge window [io  0xd000-0xdfff]
[    0.295176] pci 0000:00:15.1:   bridge window [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.295265] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604
[    0.295401] pci 0000:00:15.2: PCI bridge to [bus 05-06]
[    0.295533] pci 0000:00:15.2:   bridge window [io  0xc000-0xcfff]
[    0.295539] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.295618] pci 0000:06:02.0: [1106:3044] type 0 class 0x000c00
[    0.295656] pci 0000:06:02.0: reg 10: [mem 0xfe900000-0xfe9007ff]
[    0.295677] pci 0000:06:02.0: reg 14: [io  0xc000-0xc07f]
[    0.295820] pci 0000:06:02.0: supports D2
[    0.295824] pci 0000:06:02.0: PME# supported from D2 D3hot D3cold
[    0.295832] pci 0000:06:02.0: PME# disabled
[    0.295915] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.295977] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.295985] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.295998] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.296003] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff] (subtractive decode)
[    0.296008] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.296014] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.296060] pci_bus 0000:00: on NUMA node 0
[    0.296072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.296404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.296464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[    0.296523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[    0.296589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[    0.296654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22.BR23._PRT]
[    0.296745]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.296972]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.297194] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.309112] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.310251] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.310876] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.311540] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.312073] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.312668] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.313338] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.313913] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.314997] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.314997] vgaarb: loaded
[    0.315129] vgaarb: bridge control possible 0000:00:01.0
[    0.315411] SCSI subsystem initialized
[    0.316069] libata version 3.00 loaded.
[    0.316981] PCI: Using ACPI for IRQ routing
[    0.327752] PCI: pci_cache_line_size set to 64 bytes
[    0.327901] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    0.327906] reserve RAM buffer: 000000006ec3c000 - 000000006fffffff 
[    0.327913] reserve RAM buffer: 000000006ecd9000 - 000000006fffffff 
[    0.327919] reserve RAM buffer: 000000006ef00000 - 000000006fffffff 
[    0.328128] Switching to clocksource hpet
[    0.328340] pnp: PnP ACPI init
[    0.328521] ACPI: bus type pnp registered
[    0.328974] pnp 00:00: [bus 00-ff]
[    0.328979] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.328983] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.328988] pnp 00:00: [io  0x0d00-0xffff window]
[    0.328992] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.328996] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.329066] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[    0.329070] pnp 00:00: [mem 0x00000000 window]
[    0.329244] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.329318] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.329548] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.329716] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.330546] pnp 00:02: [io  0x040b]
[    0.330550] pnp 00:02: [io  0x04d6]
[    0.330554] pnp 00:02: [io  0x0c00-0x0c01]
[    0.330558] pnp 00:02: [io  0x0c14]
[    0.330561] pnp 00:02: [io  0x0c50-0x0c51]
[    0.330565] pnp 00:02: [io  0x0c52]
[    0.330568] pnp 00:02: [io  0x0c6c]
[    0.330571] pnp 00:02: [io  0x0c6f]
[    0.330574] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.330578] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.330581] pnp 00:02: [io  0x0cd4-0x0cd5]
[    0.330584] pnp 00:02: [io  0x0cd6-0x0cd7]
[    0.330587] pnp 00:02: [io  0x0cd8-0x0cdf]
[    0.330591] pnp 00:02: [io  0x0800-0x089f]
[    0.330595] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.330598] pnp 00:02: [io  0x0000-0x000f]
[    0.330602] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.330605] pnp 00:02: [io  0x0900-0x090f]
[    0.330608] pnp 00:02: [io  0x0910-0x091f]
[    0.330612] pnp 00:02: [io  0xfe00-0xfefe]
[    0.330615] pnp 00:02: [io  0x0060-0x005f disabled]
[    0.330619] pnp 00:02: [io  0x0064-0x0063 disabled]
[    0.330623] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.330626] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.330630] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[    0.330634] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[    0.330637] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[    0.330643] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.330646] pnp 00:02: [mem 0xffc00000-0xffffffff]
[    0.330933] system 00:02: [io  0x040b] has been reserved
[    0.331111] system 00:02: [io  0x04d6] has been reserved
[    0.331239] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.331372] system 00:02: [io  0x0c14] has been reserved
[    0.331502] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.331645] system 00:02: [io  0x0c52] has been reserved
[    0.331774] system 00:02: [io  0x0c6c] has been reserved
[    0.331915] system 00:02: [io  0x0c6f] has been reserved
[    0.332098] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.332223] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.332342] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.332476] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.332596] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.332714] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.332834] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.332954] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.333085] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.333206] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.333330] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.333467] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.333590] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.333725] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.333845] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.333964] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.334097] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[    0.334221] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334469] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.334474] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.334478] pnp 00:03: [io  0x0290-0x029f]
[    0.334481] pnp 00:03: [io  0x0a20-0x0a2f]
[    0.334702] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.334831] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.334953] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335323] pnp 00:04: [dma 4]
[    0.335328] pnp 00:04: [io  0x0000-0x000f]
[    0.335332] pnp 00:04: [io  0x0081-0x0083]
[    0.335336] pnp 00:04: [io  0x0087]
[    0.335339] pnp 00:04: [io  0x0089-0x008b]
[    0.335343] pnp 00:04: [io  0x008f]
[    0.335346] pnp 00:04: [io  0x00c0-0x00df]
[    0.335532] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.335571] pnp 00:05: [io  0x0070-0x0071]
[    0.335590] pnp 00:05: [irq 8]
[    0.335730] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.335774] pnp 00:06: [io  0x0061]
[    0.335977] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.336081] pnp 00:07: [io  0x0010-0x001f]
[    0.336086] pnp 00:07: [io  0x0022-0x003f]
[    0.336089] pnp 00:07: [io  0x0044-0x005f]
[    0.336093] pnp 00:07: [io  0x0072-0x007f]
[    0.336096] pnp 00:07: [io  0x0080]
[    0.336099] pnp 00:07: [io  0x0084-0x0086]
[    0.336102] pnp 00:07: [io  0x0088]
[    0.336105] pnp 00:07: [io  0x008c-0x008e]
[    0.336109] pnp 00:07: [io  0x0090-0x009f]
[    0.336112] pnp 00:07: [io  0x00a2-0x00bf]
[    0.336115] pnp 00:07: [io  0x00e0-0x00ef]
[    0.336120] pnp 00:07: [io  0x04d0-0x04d1]
[    0.336281] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.336423] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336443] pnp 00:08: [io  0x00f0-0x00ff]
[    0.336461] pnp 00:08: [irq 13]
[    0.336675] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.336930] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337414] pnp 00:0a: [mem 0x6f000000-0x7effffff]
[    0.337550] system 00:0a: [mem 0x6f000000-0x7effffff] could not be reserved
[    0.337691] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337939] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[    0.338094] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.338105] pnp: PnP ACPI: found 12 devices
[    0.338224] ACPI: ACPI bus type pnp unregistered
[    0.351052] PCI: max bus depth: 2 pci_try_num: 3
[    0.351124] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.351261] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.351391] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.351524] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.351748] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.351903] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.352066] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[    0.352194] pci 0000:00:15.1:   bridge window [io  0xd000-0xdfff]
[    0.352331] pci 0000:00:15.1:   bridge window [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.352538] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[    0.352672] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.352796] pci 0000:05:00.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.352943] pci 0000:00:15.2: PCI bridge to [bus 05-06]
[    0.353074] pci 0000:00:15.2:   bridge window [io  0xc000-0xcfff]
[    0.353196] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.353365] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353494] pci 0000:00:04.0: setting latency timer to 64
[    0.353510] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353646] pci 0000:00:15.0: setting latency timer to 64
[    0.353656] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353778] pci 0000:00:15.1: setting latency timer to 64
[    0.353788] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353924] pci 0000:00:15.2: setting latency timer to 64
[    0.353941] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.354078] pci 0000:05:00.0: setting latency timer to 64
[    0.354086] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.354090] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.354094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.354098] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[    0.354103] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.354107] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.354111] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.354115] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.354119] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.354123] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.354127] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[    0.354131] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.354135] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd20fffff 64bit pref]
[    0.354140] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.354143] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.354147] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.354151] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.354155] pci_bus 0000:06: resource 4 [io  0xc000-0xcfff]
[    0.354159] pci_bus 0000:06: resource 5 [mem 0xfe900000-0xfe9fffff]
[    0.354285] NET: Registered protocol family 2
[    0.354549] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.355323] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.357854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.358619] TCP: Hash tables configured (established 262144 bind 65536)
[    0.358768] TCP reno registered
[    0.358912] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359100] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359389] NET: Registered protocol family 1
[    0.359838] RPC: Registered named UNIX socket transport module.
[    0.359991] RPC: Registered udp transport module.
[    0.360149] RPC: Registered tcp transport module.
[    0.360276] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.360437] pci 0000:00:01.0: Boot video device
[    0.360469] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.180254] pci 0000:00:12.0: PCI INT A disabled
[    1.180441] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.180613] pci 0000:00:12.2: PCI INT B disabled
[    1.180763] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.253247] pci 0000:00:13.0: PCI INT A disabled
[    1.253414] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.253584] pci 0000:00:13.2: PCI INT B disabled
[    1.253744] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.326249] pci 0000:00:14.5: PCI INT C disabled
[    1.326428] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.398255] pci 0000:00:16.0: PCI INT A disabled
[    1.398436] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.398607] pci 0000:00:16.2: PCI INT B disabled
[    1.398788] PCI: CLS 64 bytes, default 64
[    1.398894] Trying to unpack rootfs image as initramfs...
[    1.399297] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    1.405330] Freeing initrd memory: 5740k freed
[    1.410637] perf: AMD IBS detected (0x000000ff)
[    1.412090] Intel AES-NI instructions are not detected.
[    1.412243] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    1.420653] VFS: Disk quotas dquot_6.5.2
[    1.420879] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.421839] msgmni has been set to 3468
[    1.422556] async_tx: api initialized (async)
[    1.422892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.423166] io scheduler noop registered
[    1.423359] io scheduler cfq registered (default)
[    1.476487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.498230] brd: module loaded
[    1.498757] Loading iSCSI transport class v2.0-870.
[    1.500120] rdac: device handler registered
[    1.500755] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.501104] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0
[    1.501675] iscsi: registered transport (qla4xxx)
[    1.501970] QLogic iSCSI HBA Driver
[    1.502332] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[    1.502595] mpt2sas version 11.100.00.00 loaded
[    1.502957] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.503292] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.503547] 3w-9xxx 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.503697] 3w-9xxx 0000:01:00.0: setting latency timer to 64
[    1.759248] scsi0 : 3ware 9000 Storage Controller
[    1.760251] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16.
[    2.066240] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8.
[    2.067176] scsi 0:0:0:0: Direct-Access     AMCC     9650SE-8LP DISK  4.10 PQ: 0 ANSI: 5
[    2.078826] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    2.079378] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    2.079864] VMware PVSCSI driver - version 1.0.1.0-k
[    2.080583] sd 0:0:0:0: [sda] 5859311616 512-byte logical blocks: (2.99 TB/2.72 TiB)
[    2.080928] ahci 0000:00:11.0: version 3.0
[    2.080979] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.081310] sd 0:0:0:0: [sda] Write Protect is off
[    2.081373] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.081379] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.081980] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[    2.082435] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    2.085059] scsi1 : ahci
[    2.085708] scsi2 : ahci
[    2.086246] scsi3 : ahci
[    2.086762] scsi4 : ahci
[    2.087177] scsi5 : ahci
[    2.087624] scsi6 : ahci
[    2.088150] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19
[    2.090947] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19
[    2.091162] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19
[    2.091364] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19
[    2.091566] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19
[    2.091769] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19
[    2.091971] Enable Synology sata fast booting
[    2.129952]  sda: sda1 sda2
[    2.132323] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.412301] Refined TSC clocksource calibration: 1649.962 MHz.
[    2.412460] Switching to clocksource tsc
[    3.924523] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    3.924828] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    3.924989] Copyright (c) 2007 Atheros Corporation.
[    3.925407] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[    3.925690] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25)
[    3.926341] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    3.926504] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.926742] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.926904] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.927201] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[    3.927363] Copyright (c) 2007-2011 Intel Corporation.
[    3.927662] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    3.928029] sky2: driver version 1.30
[    3.928430] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
[    3.929224] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
[    3.929985] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.933470] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.933624] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.934050] rtc_cmos 00:05: RTC can wake from S4
[    3.934403] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.934603] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.934813] i2c /dev entries driver
[    3.935083] md: linear personality registered for level -1
[    3.935228] md: raid0 personality registered for level 0
[    3.935371] md: raid1 personality registered for level 1
[    3.935514] md: raid10 personality registered for level 10
[    3.935657] md: raid6 personality registered for level 6
[    3.935798] md: raid5 personality registered for level 5
[    3.935935] md: raid4 personality registered for level 4
[    3.936277] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.936517] cpuidle: using governor ladder
[    3.936649] cpuidle: using governor menu
[    3.937128] TCP cubic registered
[    3.937276] NET: Registered protocol family 17
[    3.938246] rtc_cmos 00:05: setting system clock to 2013-07-10 17:59:06 UTC (1373479146)
[    4.227246] ata4: SATA link down (SStatus 0 SControl 300)
[    4.227448] ata3: SATA link down (SStatus 0 SControl 300)
[    4.227633] ata2: SATA link down (SStatus 0 SControl 300)
[    4.227823] ata5: SATA link down (SStatus 0 SControl 300)
[    4.228096] ata6: SATA link down (SStatus 0 SControl 300)
[    4.382269] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.382920] ata1.00: ATA-8: STT_FTM32GX25H, 1819, max UDMA/133
[    4.383092] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    4.386418] ata1.00: configured for UDMA/133
[    4.386680] ata1.00: Find SSD disks. [sTT_FTM32GX25H]
[    4.387149] scsi 1:0:0:0: Direct-Access     ATA      STT_FTM32GX25H   1819 PQ: 0 ANSI: 5
[    4.388071] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    4.388437] sd 1:0:0:0: [sdb] Write Protect is off
[    4.388593] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.388654] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.390056]  sdb: sdb1 sdb2
[    4.391259] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.391480] md: Waiting for all devices to be available before autodetect
[    4.391654] md: If you don't use raid, use raid=noautodetect
[    4.392299] md: Autodetecting RAID arrays.
[    4.395699] md: deny sda1.
[    4.395867] md: export_rdev(sda1)
[    4.414045] md: deny sda2.
[    4.414210] md: export_rdev(sda2)
[    4.415058] md: Scanned 4 and added 2 devices.
[    4.415233] md: autorun ...
[    4.415370] md: considering sdb1 ...
[    4.415518] md:  adding sdb1 ...
[    4.415659] md: sdb2 has different UUID to sdb1
[    4.415807] md: created md0
[    4.415946] md: bind
[    4.416124] md: running: 
[    4.416696] bio: create slab  at 1
[    4.417047] md/raid1:md0: active with 1 out of 12 mirrors
[    4.417238] md0: detected capacity change from 0 to 2549940224
[    4.417531] md: considering sdb2 ...
[    4.417700] md:  adding sdb2 ...
[    4.418272] md: created md1
[    4.418426] md: bind
[    4.418571] md: running: 
[    4.419100] md/raid1:md1: active with 1 out of 12 mirrors
[    4.419293] md1: detected capacity change from 0 to 2147418112
[    4.419574] md: ... autorun DONE.
[    4.420099]  md1: unknown partition table
[    4.420500] RAMDISK: gzip image found at block 0
[    4.685482] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    4.701060] e1000e: Intel(R) PRO/1000 Network Driver - 2.4.14-NAPI
[    4.701226] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    4.714749] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
[    4.714966] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.715156] r8168 0000:04:00.0: setting latency timer to 64
[    4.715250] r8168 0000:04:00.0: irq 40 for MSI/MSI-X
[    4.726221] eth%d: 0xffffc9000005a000, 60:a4:4c:b2:96:b5, IRQ 40
[    4.729476] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    4.729732] r8168  Copyright (C) 2013  Realtek NIC software team 
[    4.729735]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
[    4.729737]  This is free software, and you are welcome to redistribute it under certain conditions; see . 
[    4.734415] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    4.734583] Disabling lock debugging due to kernel taint
[    4.737155] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
[    4.737469] IP: [] syno_libata_index_get_by_map+0x36/0x83
[    4.737662] PGD 6b1cb067 PUD 6b1ca067 PMD 0 
[    4.737931] Oops: 0000 [#1] SMP 
[    4.738005] CPU 0 
[    4.738005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O)
[    4.738005] 
[    4.738005] Pid: 1273, comm: insmod Tainted: P           O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO
[    4.738005] RIP: 0010:[]  [] syno_libata_index_get_by_map+0x36/0x83
[    4.738005] RSP: 0018:ffff88006dfbbd48  EFLAGS: 00010286
[    4.738005] RAX: 0000000000000000 RBX: ffff88006dfbbd58 RCX: 0000000000000000
[    4.738005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006dfbbd58
[    4.738005] RBP: ffff88006ac68000 R08: ffffffff81921c60 R09: 0000000000000000
[    4.738005] R10: ffff88006b3fa400 R11: 0000000000000016 R12: 0000000000000000
[    4.738005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016
[    4.738005] FS:  0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000
[    4.738005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    4.738005] CR2: 0000000000000068 CR3: 000000006b1ce000 CR4: 00000000000006f0
[    4.738005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.738005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    4.738005] Process insmod (pid: 1273, threadinfo ffff88006dfba000, task ffff88006b3b77d0)
[    4.738005] Stack:
[    4.738005]  ffff88006ac68000 ffffffff812077f8 0000000000000000 ffffffffa009f720
[    4.738005]  ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720
[    4.738005]  0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4
[    4.738005] Call Trace:
[    4.738005]  [] ? scsi_host_lookup+0x46/0x4e
[    4.738005]  [] ? syno_libata_disk_map_table_gen+0x43/0x92
[    4.738005]  [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios]
[    4.738005]  [] ? synobios_model_init+0x54/0x190 [bromolow_synobios]
[    4.738005]  [] ? synobios_init+0x44/0x2d0 [bromolow_synobios]
[    4.738005]  [] ? do_one_initcall+0x79/0x127
[    4.738005]  [] ? sys_init_module+0x104a/0x11ef
[    4.738005]  [] ? fput+0x175/0x196
[    4.738005]  [] ? filp_close+0x64/0x6c
[    4.738005]  [] ? system_call_fastpath+0x16/0x1b
[    4.738005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 
[    4.738005] RIP  [] syno_libata_index_get_by_map+0x36/0x83
[    4.738005]  RSP 
[    4.738005] CR2: 0000000000000068
[    4.747597] ---[ end trace 454336d2c682554a ]---
[    4.786724]  md0: unknown partition table
[    4.875779] EXT4-fs (md0): barriers disabled
[    4.876564] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[    5.037810] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   12.389781] synoacl module [synoacl_ext4] is not loaded 
[   12.389950] synoacl module [synoacl_vfs] is not loaded 
[   12.410534] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0)
[   12.497663] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   12.497932] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[   12.498099] Trying to move old root to /initrd ... okay
[   12.501312] Freeing unused kernel memory: 428k freed
[   12.501671] Write protecting the kernel read-only data: 8192k
[   12.509830] Freeing unused kernel memory: 1388k freed
[   12.512051] Freeing unused kernel memory: 196k freed
[   12.543232] EXT4-fs (md0): re-mounted. Opts: (null)

I have the same problem, my SSD is mounted on sdb (Debian Wheezy) and my HDD in sda, sdc, sdd, sde... I have forced them to use UUID...

For the moment, I haven't installed XPEnology, not enough time, but I would like follow this thread :wink:

 

Just one question for you, Have you made your Raid with mdadm or with XPEnology (under virtualbox I think...) ?

Link to comment
Share on other sites

How can I get this running with ESXi (vSphere) 5.1,

 

I have a LSI MEGARAID controller in IT mode with hardware passthrough, Xeon 1230v2 and 32gb ram, I also have datastores on RAIDED SSD's, I cannot figure a way to install the *.IMG to a VM? is there a way to do this.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...