Recommended Posts

Trying to get my 10gb HP NC523 sfp card to work on my Micro server Gen 8 running 3615 1.03 when I add the card none of the Nics pickup a DHCP.

 

According to all the information it should work ootb but doesn't.  I have swapped out the HDD and USB with a fresh build and it sees the Nics but as soon as I install the  OS it reboots but I can't connect to it.

 

Can I get my current or fresh build to work with the 10GB card.

 

Any tips / advice / help would be appreciated

 

thanks.

Link to post
Share on other sites

Well the obvious troubleshooting option would be to configure a static IP for the Gbe card, and see if you can still connect to it after you install the 10Gbe.

 

How many NICs are in the server now?

Link to post
Share on other sites

Its a HP Micro server Gen 8 so 2 x 1gb 1 x iLo 1gb built in, then the newly added 10GB NC523sfp  

 

DHCP assigns the IP on boot to the 10gb and the 1gb - they are both seen at the first stage of the build but then no connection after the OS / *.pat is installed.

 

If remove the card and reinstall it will build fine.  I have two of these cards and both work fine in Windows 10 & Server.

Link to post
Share on other sites
Posted (edited)
11 hours ago, bowlerman said:

According to all the information it should work ootb but doesn't.

 

FWIW, the card is a QLogic 8214 rebranded as HP.  I am not aware of any Synology OEM QLogic cards but there is a native driver qlcnic which should support that chip.  The PCI ID of the supported card is VID 1077 DEVID 8020 - and according to this the HP card keeps the ID's intact, so the native driver should work.

 

DHCP assignment pre-boot is not explicitly for the OS; it's for PXE boot, which DSM doesn't use.

Post boot, the OS will re-request the address(es) from DHCP or use a static IP as needed.

 

You should not connect the iLo NIC to your regular network (and the driver is unlikely to be supported by DSM in any case).  I still would disable one of the 1 Gbe NICs in the BIOS and assign a static IP in DSM to remove the number of moving parts prior to introducing the 10Gbe card.

 

If that still doesn't work, maybe @IG-88 has compiled a newer qlcnic in his extra.lzma.

Edited by flyride
Link to post
Share on other sites

DHCP assignment pre-boot is not explicitly for the OS; it's for PXE boot, which DSM doesn't use.

Post boot, the OS will re-request the address(es) from DHCP or use a static IP as needed.

 

Agreed; so the OS is not requesting the DHCP address, so how do I use a static on the console ?

 

I have already emailed @IG-88 who confirmed that this should work OOTB and as stated it does but only on the first boot.

 

I know others on here have got these working and was hoping someone who has could give me some pointers on how.

Link to post
Share on other sites

Not sure how to more more explicit, but here is the sequence that I would try:

 

1. Disable extra 1 Gbe port

2. Install DSM

3. Assign static IP to Gbe port in DSM

4. Reboot and evaluate to make sure all is working

5. Install HP 10Gbe card and evaluate

Link to post
Share on other sites
15 hours ago, flyride said:

Not sure how to more more explicit, but here is the sequence that I would try:

 

1. Disable extra 1 Gbe port

2. Install DSM

3. Assign static IP to Gbe port in DSM

4. Reboot and evaluate to make sure all is working

5. Install HP 10Gbe card and evaluate

 

Hi tried this and got the same result, at step 5 when I install the card it won't give a network connection but the loader appears to load.

 

Removing the card allows it to work again

 

 

Link to post
Share on other sites
4 hours ago, bowlerman said:

Removing the card allows it to work again

you could check the /var/log/dmesg for errors when you can access the system after the failed attempt with the hpe nic

 

Link to post
Share on other sites
1 hour ago, IG-88 said:

you could check the /var/log/dmesg for errors when you can access the system after the failed attempt with the hpe nic

 

 

does the loader have a debug mode?

 

Must be something on the loader side as it doesn't log anything when the card is in;

 

12:08 is when the card is in 

 

12:30 is with it removed 

 

 [Sat May 15 12:08:09 2021] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled.
[Sat May 15 12:08:12 2021] warning: `nginx' uses 32-bit capabilities (legacy support in use)
[Sat May 15 12:30:56 2021] Initializing cgroup subsys cpuset
[Sat May 15 12:30:56 2021] Initializing cgroup subsys cpu
[Sat May 15 12:30:56 2021] Initializing cgroup subsys cpuacct
[Sat May 15 12:30:56 2021] Linux version 3.10.105 (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25426 SMP Mon Dec 14 18:47:46 CST 2020
[Sat May 15 12:30:56 2021] Command line: syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1330ODN003265 mac1=3ca82a9fc43c mac2=3ca82a9fc43d mac3=a01d48730470 mac4=a01d48730474 netif_num=4 vid=0x0781 pid=0x5583
[Sat May 15 12:30:56 2021] KERNEL supported cpus:
[Sat May 15 12:30:56 2021]   Intel GenuineIntel
[Sat May 15 12:30:56 2021] e820: BIOS-provided physical RAM map:
[Sat May 15 12:30:56 2021] BIOS-e820: [mem 0x0000000000000100-0x000000000009bbff] usable
[Sat May 15 12:30:56 2021] BIOS-e820: [mem 0x000000000009bc00-0x000000000009bfff] reserved
[Sat May 15 12:30:56 2021] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved

Link to post
Share on other sites
On 5/15/2021 at 1:37 PM, bowlerman said:

does the loader have a debug mode?

 

On 5/15/2021 at 1:37 PM, bowlerman said:

 [Sat May 15 12:08:09 2021] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled.
[Sat May 15 12:08:12 2021] warning: `nginx' uses 32-bit capabilities (legacy support in use)

that does not look like the system got stuck an boot (12:08), that indicates it started , so the content from ~12:0x to 12:08 would be the interesting part to see what happened when the qlogic driver was supposed to load/start

 

On 5/15/2021 at 1:37 PM, bowlerman said:

does the loader have a debug mode?

the thing here you can use at boot is the serial console if the system has a serial port or a virtual serial port (like HPE iLO does), you would see the drivers loading or fail and see if a kernel panic happens , i case of a real serial port it needs a null-modem cable

Link to post
Share on other sites
Posted (edited)

The time between 12:08 and 12:30 is when the card was inserted and I have no logs in the OS as it did not boot.  12:08 is the end of the last successful  boot and 12:30 is the start of the start of the next successful boot.

 

As regards the Debug mode the only options I have are E  or C

 

E  edit commands before booting

C for command line 

 

Sorry never used the virtual serial port on the iLo let me check this and come back to you.

 

 

image_2021-05-17_061614.png

Edited by bowlerman
Link to post
Share on other sites

Manged to get into the virtual serial port on the iLo, not sure how to get the boot info.   I tried the windbg command and  just get;

 

status=2
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND NOT RECOGNIZED
Mon May 17 10:30:02 2021

 

Ran disable and enable still no joy, also VSP with no output to the putty session.

 

Do I need to go e or c and run any command to pipe this to the putty session?

 

Link to post
Share on other sites
On 5/17/2021 at 12:28 PM, bowlerman said:

also VSP with no output to the putty session.

thats the way it should work, its just serial console output comming

the parameters are shown in the grub.cfg of the loader

console=ttyS0,115200n8

Link to post
Share on other sites
On 5/18/2021 at 11:00 PM, IG-88 said:

thats the way it should work, its just serial console output comming

the parameters are shown in the grub.cfg of the loader

console=ttyS0,115200n8

 

On the MS GEN8 the I can't seem to redirect to Com 2 tried ttyS1  and a few BIOS changes but no joy - no out put.

 

I have had chance to re build using  ds3615xs 6.1 & 15284.pat and this works fine.  I would like to use 6.2 but cannot seem get that to work. 

Link to post
Share on other sites
On 5/18/2021 at 11:00 PM, IG-88 said:

thats the way it should work, its just serial console output comming

the parameters are shown in the grub.cfg of the loader

console=ttyS0,115200n8

 

Got it working with the VSP 3615xs 6.2 23739 but still hanging at the 3rd nic see below;

 

patching file etc/rc
patching file etc/synoinfo.conf
Hunk #1 FAILED at 291.
1 out of 1 hunk FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
patching file usr/sbin/init.post
cat: can't open '/etc/synoinfo_override.conf': No such file or directory
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]                                                                                                                                    :: Loading module usbcore ... [  OK  ]                                                                                                                                       :: Loading module ehci-hcd ... [  OK  ]                                                                                                                                      :: Loading module ehci-pci ... [  OK  ]                                                                                                                                      :: Loading module ohci-hcd ... [  OK  ]                                                                                                                                      :: Loading module uhci-hcd ... [  OK  ]                                                                                                                                      :: Loading module xhci-hcd ... [  OK  ]                                                                                                                                      :: Loading module usb-storage ... [  OK  ]                                                                                                                                   :: Loading module BusLogic ... [  OK  ]                                                                                                                                      :: Loading module vmw_pvscsi ... [  OK  ]                                                                                                                                    :: Loading module megaraid_mm ... [  OK  ]                                                                                                                                   :: Loading module megaraid_mbox ... [  OK  ]                                                                                                                                 :: Loading module megaraid ... [  OK  ]                                                                                                                                      :: Loading module scsi_transport_spi ... [  OK  ]                                                                                                                            :: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptsas ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mpt2sas ... [  OK  ]
:: Loading module mpt3sas ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
All disk ready or timeout execeed
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0...
/sbin/e2fsck -pvf returns 1
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
Found an upgrade file on data volume. Begin upgrade
Checksum of system tarball verified.
/tmpRoot//etc ->        /tmpRoot/.upd@te/etc/
/tmpRoot//var ->        /tmpRoot/.upd@te/var/
Removing /tmpRoot/.upd@te//etc/ftpusers...
Removing /tmpRoot/.upd@te//etc/rc...
Removing /tmpRoot/.upd@te//etc/rc.network...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.atalk...
Removing /tmpRoot/.upd@te//usr/syno/etc/.htpasswd...
Removing /tmpRoot/.upd@te//usr/syno/etc/lpd/lpd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/printcap...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.users...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsmon.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upssched.conf...
Removing /tmpRoot/.upd@te//etc/lvm/lvm.conf...
Removing /tmpRoot/.upd@te//usr/local/etc/rc.d/SynoEnablePersonalServices.sh...
Removing /tmpRoot/.upd@te//etc/rc.network_routing...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.tun...
Removing /tmpRoot/.upd@te//usr/syno/etc/afpd.conf...
Removing /tmpRoot/.upd@te//etc/pam.d/samba...
Removing /tmpRoot/.upd@te//etc/ppp/ip-up...
Removing /tmpRoot/.upd@te//etc/ppp/ip-down...
Removing /tmpRoot/.upd@te//etc/ppp/ip-function...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-up...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-down...
Removing /tmpRoot/.upd@te//etc/ppp/options...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.types...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.convs...
Removing /tmpRoot/.upd@te//etc/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/testprint...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/bannertops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/commandtops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/gziptoany...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetoraster...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pdftops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pstops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertoepson...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertohp...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertolabel...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertopwg...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/texttops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/hpgltops...
Removing /tmpRoot/.upd@te//etc/hostapd/stainfo.sh...
Removing /tmpRoot/.upd@te//etc/hostapd/mac_filter/mfscript.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/rfkill.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_guest_net.sh...
Removing /tmpRoot/.upd@te//etc/ld.so.preload...
Removing /tmpRoot/.upd@te//etc/tc/default.cmd...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcert.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcgikey.sh...
Removing /tmpRoot/.upd@te//etc/logrotate.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/wcdma_list.json...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/usb_modeswitch.d/*...
Removing /tmpRoot/.upd@te//etc/php/php.ini...
Removing /tmpRoot/.upd@te//etc/php/php-fpm.conf...
Removing /tmpRoot/.upd@te//etc/php/conf.d/opcache.ini...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/global.setting...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/system.cfg...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssdp/dsm_desc.xml...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_time_ctrl.sh...
Removing /tmpRoot/.upd@te//etc/profile...
Removing /tmpRoot/.upd@te//etc/inputrc...
Removing /tmpRoot/.upd@te//etc/dhclient/dhclient-script...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv4/dhclient.conf...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv6/dhclient.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/SSLProfile.json...
Removing /tmpRoot/.upd@te//etc/vimrc...
Removing /tmpRoot/.upd@te//usr/syno/etc/cacert.pem...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_modules_list...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_chain_list...
Removing /tmpRoot/.upd@te//usr/local/bin/python*...
Removing /tmpRoot/.upd@te//etc/sudoers...
Removing /tmpRoot/.upd@te//usr/syno/etc/openldap/ldap.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/autoupdate.notify...
Removing /tmpRoot/.upd@te//etc/pam.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/vfs...
Removing /tmpRoot/.upd@te//var/run...
Removing /tmpRoot/.upd@te//var/state/ups...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups...
Removing /tmpRoot/.upd@te//var/spool/postfix...
Removing /tmpRoot/.upd@te//usr/local/cups/backend...
Removing /tmpRoot/.upd@te//usr/local/cups/mime...
Removing /tmpRoot/.upd@te//etc/fw_security/sysconf...
Removing /tmpRoot/.upd@te//etc/init...
Removing /tmpRoot/.upd@te//etc/logrotate.d...
Removing /tmpRoot/.upd@te//etc/syslog-ng...
Removing /tmpRoot/.upd@te//var/lib/dpkg...
Removing /tmpRoot/.upd@te//etc/httpd/conf...
Removing /tmpRoot/.upd@te//etc/postgresql...
Removing /tmpRoot/.upd@te//etc/nginx...
Removing /tmpRoot/.upd@te//etc/wide-dhcpv6...
Removing /tmpRoot/.upd@te//etc/apparmor.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d...
Removing /tmpRoot/.upd@te//var/dynlib...
Removing /tmpRoot/.upd@te//etc/iproute2/script...
Removing /tmpRoot/.upd@te//etc/ssl/certs...
Removing /tmpRoot/.upd@te//etc/dbus-1...
Removing /tmpRoot/.upd@te//usr/syno/etc/dbus-1...
Removing /tmpRoot/.upd@te//etc/avahi...
Removing /tmpRoot/.upd@te//usr/syno/etc/synovpnclient/scripts...
Removing /tmpRoot/.upd@te//var/lib/apparmor...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/app.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/bluetooth/...
Removing /tmpRoot/.upd@te//usr/syno/etc/smallupdate_patch...
Removing /tmpRoot/.upd@te//etc/ImageMagick-6...
Removing /tmpRoot/.upd@te//usr/syno/etc/logcollector...
Removing /tmpRoot/.upd@te//var/cache/texts...
chmod: /tmpRoot/.upd@te/root: No such file or directory
cp: can't stat '/tmpRoot/etc.defaults/VERSION': No such file or directory
cp: can't stat '/tmpRoot/etc.defaults/synoinfo.conf': No such file or directory
cp: can't stat '/tmpRoot/.system_info': No such file or directory
Setting up swapspace version 1, size = 2147414016 bytes
Untaring /tmpRoot/.SynoUpgrade.tar...
cp: can't create '/tmpRoot/*': No such file or directory
mknod: /dev/synobios: File exists
Starting /usr/syno/bin/synohdcfgen...
/usr/syno/bin/synohdcfgen returns 0
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Sat May 22 08:34:11 UTC 2021
/dev/md0 /tmpRoot ext4 rw,relatime,journal_checksum,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=8126780k,nr_inodes=2031695,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno executed successfully.
Post init
fgrep: /tmpRoot/etc/rc: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc: No such file or directory
fgrep: /tmpRoot/etc/rc.subr: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc.subr: No such file or directory
Installing /tmpRoot//usr/lib/modules/update/BusLogic.ko...
Installing /tmpRoot//usr/lib/modules/update/vmw_pvscsi.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mm.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mbox.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid.ko...
Installing /tmpRoot//usr/lib/modules/update/scsi_transport_spi.ko...
Installing /tmpRoot//usr/lib/modules/update/mptbase.ko...
Installing /tmpRoot//usr/lib/modules/update/mptscsih.ko...
Installing /tmpRoot//usr/lib/modules/update/mptspi.ko...
Installing /tmpRoot//usr/lib/modules/update/mptsas.ko...
Installing /tmpRoot//usr/lib/modules/update/mptctl.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_sas.ko...
Installing /tmpRoot//usr/lib/modules/update/mpt3sas.ko...
Installing /tmpRoot//usr/lib/modules/update/mii.ko...
Installing /tmpRoot//usr/lib/modules/update/libphy.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1e.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1c.ko...
Installing /tmpRoot//usr/lib/modules/update/alx.ko...
Installing /tmpRoot//usr/lib/modules/update/uio.ko...
Installing /tmpRoot//usr/lib/modules/update/ipg.ko...
Installing /tmpRoot//usr/lib/modules/update/jme.ko...
Installing /tmpRoot//usr/lib/modules/update/skge.ko...
Installing /tmpRoot//usr/lib/modules/update/sky2.ko...
Installing /tmpRoot//usr/lib/modules/update/ptp_pch.ko...
Installing /tmpRoot//usr/lib/modules/update/pch_gbe.ko...
Installing /tmpRoot//usr/lib/modules/update/qla3xxx.ko...
Installing /tmpRoot//usr/lib/modules/update/qlcnic.ko...
Installing /tmpRoot//usr/lib/modules/update/qlge.ko...
Installing /tmpRoot//usr/lib/modules/update/netxen_nic.ko...
Installing /tmpRoot//usr/lib/modules/update/sfc.ko...
Installing /tmpRoot//usr/lib/modules/update/e1000.ko...
Installing /tmpRoot//usr/lib/modules/update/pcnet32.ko...
Installing /tmpRoot//usr/lib/modules/update/vmxnet3.ko...
Installing /tmpRoot//usr/lib/modules/update/bnx2.ko...
Installing /tmpRoot//usr/lib/modules/update/cnic.ko...
Installing /tmpRoot//usr/lib/modules/update/r8168.ko...
Installing /tmpRoot//usr/lib/modules/update/r8169.ko...
Installing /tmpRoot//usr/lib/modules/update/tg3.ko...
Installing /tmpRoot//usr/lib/modules/update/ax88179_178a.ko...
Installing /tmpRoot//usr/lib/modules/update/button.ko...
Installing /tmpRoot//usr/lib/modules/update/ohci-hcd.ko...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso5.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3.bin...

==================== start udevd ====================
===== trigger device plug event =====
[   47.435860] netif_napi_add() called with weight 256 on device eth0
[   51.918255] general protection fault: 0000 [#1] SMP
[   51.920326] Modules linked in: bromolow_synobios(PO) button(F) ax88179_178a(F                                                                                             ) usbnet tg3(F) r8169(F) cnic(F) bnx2(F) vmxnet3(F) pcnet32(F) e1000(F) sfc(F) n                                                                                             etxen_nic(F) qlge(F) qlcnic(F) qla3xxx(F) pch_gbe(F) ptp_pch(F) sky2(F) skge(F)                                                                                              jme(F) ipg(F) uio(F) alx(F) atl1c(F) atl1e(F) atl1(F) libphy(F) mii(F) exfat(O)                                                                                              btrfs synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac bnx2x(O) libcrc32c mdio mlx5                                                                                             _core(O) mlx4_en(O) mlx4_core(O) mlx_compat(O) compat(O) qede(O) qed(O) atlantic                                                                                             (O) r8168(OF) tn40xx(O) i40e(O) ixgbe(O) be2net(O) igb(O) i2c_algo_bit e1000e(O)                                                                                              dca vxlan fuse vfat fat crc32c_intel glue_helper lrw gf128mul ablk_helper arc4                                                                                              cryptd ecryptfs sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic a                                                                                             nsi_cprng cts md5 cbc cpufreq_conservative cpufreq_powersave cpufreq_performance                                                                                              cpufreq_ondemand mperf processor thermal_sys cpufreq_stats freq_table dm_snapsh                                                                                             ot crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel                                                                                              ipv6 zram(C) sg etxhci_hcd mpt3sas(F) mpt2sas(O) megaraid_sas(F) mptctl(F) mpts                                                                                             as(F) mptspi(F) mptscsih(F) mptbase(F) scsi_transport_spi(F) megaraid(F) megarai                                                                                             d_mbox(F) megaraid_mm(F) vmw_pvscsi(F) BusLogic(F) usb_storage xhci_hcd uhci_hcd                                                                                              ohci_hcd(F) ehci_pci ehci_hcd usbcore usb_common fgcdffbuxl(OF) [last unloaded:                                                                                              bromolow_synobios]
[   51.966452] CPU: 1 PID: 9884 Comm: cat Tainted: PF        C O 3.10.105 #23739
[   51.969000] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019
[   51.971486] task: ffff8803de0f3800 ti: ffff8803f2384000 task.ti: ffff8803f238                                                                                             4000
[   51.974178] RIP: 0010:[<ffffffff81406641>]  [<ffffffff81406641>] __ethtool_ge                                                                                             t_link_ksettings+0x61/0x110
[   51.977680] RSP: 0018:ffff8803f2387e08  EFLAGS: 00010202
[   51.979537] RAX: ffffffffa0c06e00 RBX: ffff8803f2387e58 RCX: 0000000000000000
[   51.982094] RDX: ffffffffa0c06e00 RSI: ffff8803f2387e58 RDI: ffff880431e26000
[   51.984592] RBP: ffff880431e26000 R08: 0000000000000000 R09: 0000000000000000
[   51.987240] R10: 0000000000374 R11: 0000000000000246 R12: ffff8804318e1000
[   52.089818] R13: ffff8803cd5e16c0 R14: ffff88042f37a4a8 R15: ffff880431e263f8
[   52.092365] FS:  00007f59466ff700(0000) GS:ffff880447a40000(0000) knlGS:00000                                                                                             00000000000
[   52.095344] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   52.097402] CR2: 00007fbc4e522000 CR3: 000000043045c000 CR4: 00000000000407e0
[   52.099940] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   52.102484] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   52.105110] Stack:
[   52.105881]  0000000000000292 ffff8803f2387e20 ffff8803f2387e60 ffff8803f2387                                                                                             f58
[   52.108675]  0000000000020000 ffff8803de0f3800 ffff880431e263e8 fffffffffffff                                                                                             fea
[   52.111522]  ffff8804318e1000 ffffffff814182bf 0000000000000000 0000000000000                                                                                             000
[   52.114335] Call Trace:
[   52.115350]  [<ffffffff814182bf>] ? show_speed+0x4f/0x80
[   52.117268]  [<ffffffff81303ab7>] ? dev_attr_show+0x17/0x50
[   52.119271]  [<ffffffff811673af>] ? sysfs_read_file+0x8f/0x1a0
[   52.121367]  [<ffffffff810f6619>] ? vfs_read+0x99/0x160
[   52.123225]  [<ffffffff810f7c99>] ? SyS_read+0x59/0xb0
[   52.125044]  [<ffffffff814c6c72>] ? system_call_fastpath+0x16/0x1b
[   52.127237] Code: c7 03 00 00 00 00 48 c7 43 40 00 00 00 00 48 89 de 48 83 e7                                                                                              f8 48 29 f9 83 c1 48 c1 e9 03 f3 48 ab 48 89 ef 48 8b 85 98 01 00 00 <ff> 90 70                                                                                              01 00 00 89 c5 48 83 c4 30 89 e8 5b 5d 41 5c c3 0f 1f
[   52.133725] RIP  [<ffffffff81406641>] __ethtool_get_link_ksettings+0x61/0x110
[   52.136318]  RSP <ffff8803f2387e08>
[   52.137532] ---[ end trace 3d620fba6f989682 ]---
[   54.270096] tg3 0000:03:00.0 eth2: Link is up at 1000 Mbps, full duplex
[   54.272546] tg3 0000:03:00.0 eth2: Flow control is on for TX and on for RX
[   54.275003] tg3 0000:03:00.0 eth2: EEE is disabled
[   55.452734] tg3 0000:03:00.1 eth3: Link is up at 1000 Mbps, full duplex
[   55.455324] tg3 0000:03:00.1 eth3: Flow control is on for TX and on for RX
[   55.457810] tg3 0000:03:00.1 eth3: EEE is disabled
 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.