bigbrother72 Posted April 29, 2021 Share #1 Posted April 29, 2021 (edited) Здравствуйте Собран был давно уже NAS на стареньком компьютере (материнка GA-MA78GM-S2H + 8Gb память + 5 HDD по 1Tb) DSM 6.2.3-25426 Update 3 JUN'S LOADER v1.03b - DS3615xs ip 192.168.2.10 Скрытый текст dmidecode -t 2 # dmidecode 3.2 Scanning /dev/mem for entry point. SMBIOS 2.4 present. Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: Gigabyte Technology Co., Ltd. Product Name: GA-MA78GM-US2H Version: x.x Serial Number: cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) Dual Core Processor 4850e stepping : 2 cpu MHz : 2511.392 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow nopl pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch lbrv bogomips : 5022.78 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) Dual Core Processor 4850e stepping : 2 cpu MHz : 2511.392 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow nopl pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch lbrv bogomips : 5022.85 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps Используется как торрентокачалка и с неё потом через Kodi на Nvidia Shield фильмы смотрю. Давно уже не смотрел 4K файлы - обычно сериалы в 1080p и тут решил посмотреть в 4К фильмы скачанные на NAS давно. И тут вижу, что Kodi постоянно буферизует так, что нельзя смотреть нормально. Раньше всё было нормально. Собрал еще один NAS -из кладовки взяв еще старый комп на материнке A75F-M2 Воткнул туда один HDD + 4gb память. Версия загрузчика и DSM те же самые. 192.168.2.12 Скрытый текст dmidecode -t 2 # dmidecode 3.2 Scanning /dev/mem for entry point. SMBIOS 2.7 present. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: ECS Product Name: A75F-M2 Version: 1.0 Serial Number: Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 18 model : 1 model name : AMD A8-3850 APU with Radeon(tm) HD Graphics stepping : 0 cpu MHz : 2900.000 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow nopl aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy sv m extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_ pstate npt lbrv svm_lock nrip_save pausefilter bogomips : 5789.40 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate Поставил IPERF на оба NAS-a. Подключено в один гигабитный роутер Zyxel Keenetic С нового NAS на старый на новом iperf3 -c 192.168.2.10 Connecting to host 192.168.2.10, port 5201 [ 5] local 192.168.2.12 port 59065 connected to 192.168.2.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec 0 436 KBytes [ 5] 1.00-2.00 sec 112 MBytes 936 Mbits/sec 0 451 KBytes [ 5] 2.00-3.00 sec 111 MBytes 935 Mbits/sec 0 460 KBytes [ 5] 3.00-4.00 sec 112 MBytes 936 Mbits/sec 0 481 KBytes [ 5] 4.00-5.00 sec 111 MBytes 931 Mbits/sec 0 495 KBytes [ 5] 5.00-6.00 sec 112 MBytes 936 Mbits/sec 0 505 KBytes [ 5] 6.00-7.00 sec 111 MBytes 930 Mbits/sec 0 518 KBytes [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec 0 523 KBytes [ 5] 8.00-9.00 sec 111 MBytes 932 Mbits/sec 0 525 KBytes [ 5] 9.00-10.00 sec 112 MBytes 937 Mbits/sec 0 529 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.09 GBytes 935 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 1.09 GBytes 932 Mbits/sec receiver на старом Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.2.12, port 59064 [ 5] local 192.168.2.10 port 5201 connected to 192.168.2.12 port 59065 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 109 MBytes 911 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 936 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 935 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 933 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 932 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 934 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 933 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.03 sec 2.89 MBytes 934 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.03 sec 1.09 GBytes 932 Mbits/sec receiver ----------------------------------------------------------- Меняем местами iperf сервер и клиент А вот с старого на новый: iperf3 -c 192.168.2.12 Connecting to host 192.168.2.12, port 5201 [ 5] local 192.168.2.10 port 48420 connected to 192.168.2.12 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 12.3 MBytes 103 Mbits/sec 1673 2.83 KBytes [ 5] 1.00-2.00 sec 12.4 MBytes 104 Mbits/sec 1705 4.24 KBytes [ 5] 2.00-3.00 sec 12.2 MBytes 102 Mbits/sec 1689 2.83 KBytes [ 5] 3.00-4.00 sec 12.5 MBytes 105 Mbits/sec 1705 4.24 KBytes [ 5] 4.00-5.00 sec 12.4 MBytes 104 Mbits/sec 1688 4.24 KBytes [ 5] 5.00-6.00 sec 12.5 MBytes 104 Mbits/sec 1696 4.24 KBytes [ 5] 6.00-7.00 sec 12.4 MBytes 104 Mbits/sec 1676 4.24 KBytes [ 5] 7.00-8.00 sec 12.5 MBytes 105 Mbits/sec 1684 2.83 KBytes [ 5] 8.00-9.00 sec 12.4 MBytes 104 Mbits/sec 1696 4.24 KBytes [ 5] 9.00-10.00 sec 12.4 MBytes 104 Mbits/sec 1691 2.83 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 124 MBytes 104 Mbits/sec 16903 sender [ 5] 0.00-10.03 sec 124 MBytes 104 Mbits/sec receiver iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.2.10, port 48419 [ 5] local 192.168.2.12 port 5201 connected to 192.168.2.10 port 48420 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 11.9 MBytes 99.6 Mbits/sec [ 5] 1.00-2.00 sec 12.5 MBytes 105 Mbits/sec [ 5] 2.00-3.00 sec 12.2 MBytes 102 Mbits/sec [ 5] 3.00-4.00 sec 12.5 MBytes 105 Mbits/sec [ 5] 4.00-5.00 sec 12.4 MBytes 104 Mbits/sec [ 5] 5.00-6.00 sec 12.4 MBytes 104 Mbits/sec [ 5] 6.00-7.00 sec 12.4 MBytes 104 Mbits/sec [ 5] 7.00-8.00 sec 12.5 MBytes 105 Mbits/sec [ 5] 8.00-9.00 sec 12.4 MBytes 104 Mbits/sec [ 5] 9.00-10.00 sec 12.4 MBytes 104 Mbits/sec [ 5] 10.00-10.03 sec 359 KBytes 100 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.03 sec 124 MBytes 104 Mbits/sec receiver В чем причина может быть, что столько ошибок? Кабели не самодельные, а которые шли с роутером в комплекте - длина 50 см NAS-ы стоят на одной полке с роутером. Подключено на 1Gb покаызывает. Edited April 29, 2021 by bigbrother72 Quote Link to comment Share on other sites More sharing options...
-iliya- Posted May 24, 2021 Share #2 Posted May 24, 2021 В 29.04.2021 в 14:09, bigbrother72 сказал: В чем причина может быть, что столько ошибок? как вариант сам роутер - пробовать подключить через простенький 5 портовый гигабитный свитч. Насы в свитч и свитч в роутер. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.