XPEnology on Asrock AD2700-ITX????

[frank_zero]

hello,

 

I want to install on Asrock AD2700-ITX (it's on the hardware supported list) but I can't load the kernel (error This Kernel requires an x86-64 CPU, But only detected an i686 CPU. Unable to boot - Please use a kernel approprate for your CPU.)

 

 

 

can somone help me?

[XoN]

Hi,

 

What version of Synoboot are you using? Andy just uploaded a new version with more HW supported: viewtopic.php?f=2&t=41

 

If you have used the newest version, I would check it with the "old" one: viewtopic.php?f=2&t=1

[frank_zero]

Both of tried, same problem

[hy9a00]

hello,

 

I want to install on Asrock AD2700-ITX (it's on the hardware supported list) but I can't load the kernel (error This Kernel requires an x86-64 CPU, But only detected an i686 CPU. Unable to boot - Please use a kernel approprate for your CPU.)

 

 

I've installed DSM4.1 2668 on my AD2700-ITX without any problem. I use a 2G usb stick as boot media.

You may try the following steps:

1. restore to factory default.

2. set storage configuration to AHCI

3. Turn off all unnecessary items, such as parallel port, serial port etc.

I hope it helps. Do not use 4G or above as boot, I encountered some errors and I dont know why.

[frank_zero]

i fixst it,

 

bois update from 1.0 to 1.40 and now its running thanks alot for all

[hy9a00]

my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center.

 

The LAN is Realtek RTL8111E onboard.

 

Any help?

[frank_zero]

step 1: Install the last bios update for Asrock AD2700-ITX

 

step 2: Install the DSM of this topic XPEnology DS3612xs DSM 4.1 build 2668++

 

this was working for me at the second time (the first time I had the same problems as you) but you have to format the hardisk first

 

otherwhise try the beta

 

 

let me know if it's working

[addseo1115]

I use a 2G usb stick as boot media.

royal1688 download